On certain links near the status bar, the cursor icon is itself quivering as if caught between two items it wants to select

See the following video: http://www.youtube.com/watch?v=3ZCTzNoHz9c
Thanks!
Art

My daughter has had her Razr for about 9 months now.  About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

Similar Messages

  • Clicks on certain links near the bottom are ignored because of floating status indicator

    When I try to click on certain links near the bottom of a web page--actually, a customized Bugzilla web page--Firefox 4 does not respond. If I wiggle the mouse enough to make that floating URL "tooltip" (which displays the URL corresponding to the link over which the mouse is hovering) move to the other side of the window and then click on the link, all's well. It's as though that floating URL tooltip is blocking the mouse click.

    The add-ons bar is already visible. Bringing up the Menu Bar temporarily does not change the behavior.
    Neither of those are the tooltip I was referring to. I'm attaching a screen grab which shows my mouse hovering over the link I want to click, and the URL tooltip directly below. If I wiggle enough to make that tooltip move to the other side of the window, I can click on the link. Otherwise, my click is ignored.

  • How do I add my Applications fold back onto the dock? People say I must drag it near the trash can, but that just puts it past that barrier. I am trying to get it back to where it disappeared from, on the left hand side near the finder icon.

    How do I add my Applications fold back onto the dock? People say I must drag it near the trash can, but that just puts it past that barrier. I am trying to get it back to where it disappeared from, on the left hand side near the finder icon. And how / why did it disappear?

    With respect, you actually cannot store folders on the left side of the Dock - only on the right side. I wonder if you're talking about Launchpad, which looks like a silver rocket and shows you your installed applications? It's not actually a shortcut to the Applications folder, though. You can certainly drag Launchpad into the left side of the Dock from the Applications folder.
    Matt

  • The icons for links are gone. In their place are hyphentated boxes. After I click on the link once the real icon comes back. But litterally EVERY link icon is now a hyphenated box till I click once. How can I fix this?

    The icons for links are gone. In their place are hyphenated boxes. After I click on an existing link once the real icon comes back. For Example: I have several bookmark links for Amazon. Those links now have hyphenated boxes as their icons not the Amazon icon. Once I click on an existing link the Amazon icon is activated and replaces the hyphenated boxes. Literally EVERY bookmark / link icon is now a hyphenated box till I click once. How can I fix this? I'm running Firefox 8.0 on windows XP. This problem started this week. Before and After upgrading to firefox 8.0 from 7.xxxx. See screen shot example.jpg i've attached below. Double click to enlarge it for better viewing. Any input welcomed. Not a major problem but I would like to have the icons back.
    Thanks
    Maxboyd

    Thanks. That solved it. I had my doubts since I wasn't concerned about my lost bookmarks. I was concerned about the broken functionality. In any event, restoring from a backup solved both the functionality and the lost bookmarks. I appreciate the response!

  • Can i change the cursor icon when hover over an active link by another one ?

    Can i change the cursor icon when hover over an active link by another one ?

    i have multiple links,so is there a way to have the custom cusrsor work on all links in a page and not just one?......you can see here i have 3 links..but only the top one changes to the crosshair cursor when rolled over  http://prntscr.com/5oxkj6
    actually it seems its not working on multiple instances of the same button.
    nvm found out why,lol...it was because i ndidnt have an actual link associated with the other instances of the button....all good now:)

  • Is there any css to vary the distance between two items in apex

    Hi,
    Is there any css to vary the distance between two items ie two columns  horizontally / vertically in apex application at page line level
    Regards,
    Pavan

    Hi ,
    I done what u suggested above  but  i ll tel u clearly
    i have name,plot no,street,city,distict,state,country,phone no,pincode items.. i need to align this items like
    --------------------------------------------------------------------------main region----------------------------------------------------------------------------
    --left region-------------------------------------------middle region------------------------------------------------------right region-------------------
    name,___________
    plot no,_________
    street,________
    city,___________                                    distict,_________                                              
    state,__________                                   country,_________                                                  nothing in it
    phone no,__________                              pincode_________
    to achieve this wat i have to do
    Thanks,
    pavan

  • HT204406 how does the iTune icon present itself onto the dock. ?  And how does it play without being requested ?

    how does the iTune icon present itself onto the dock. ?
    And how does it play without being requested ?

    1. The SCB-68 is just a terminal block; it does not measure anything. The measurement is made on the board connected to the SCB-68.
    2. Computer-based data acquisistion devices and 480 V motors with solid state speed controls do not "play nice," as the kids say. The connections you are trying to make may well end up with a fried data acquisition board, fried computer, and MOST IMPORTANTLY a fried USER!
    Ground loop problems may produce noisy measurements or may destroy all the low current devices (like the computer) in the system.
    Signal conditioners are not only to reduce noise but also to provide safe isolation between the high voltage and high power parts of the system and the more sensitive parts.
    A thermocouple is a voltage generating device. The measurement system measures that voltage (typically millivolts) and independently measures the temperature of the "cold junction" of the thermocouple. The temperature at the hot junction of the thermocouple is calculated as Temperature(TC voltage difference) - Temperature(cold junction). If currents flow through the TC wires, due to ground potential differences between the motor frame and the computer ground for example, the voltage drop from Ohm's law is added to the TC voltage and will produce temperature errors. TC wire may have significantly higher resistance than wires used for most elelctrical signals so the interfering signal may be greater than the desired signal.
    Lynn

  • Certain links on the iPad won't open on some sites...

    So we have two websites which we'd like to make sure look good and work correctly on iPads and iPhones. One is the production site and one is the development site. Both sites currently have the exact same code.
    When accessing links on the iPad, only those on the dev site open when touched. Links on the production site don't react when touched unless a user holds their finger down on it to open the "open in a new tab" dialog box.
    The sites are hosted on different servers. Both are running Linux distributions.
    The site does this in both Safari and Chrome. Resetting the iPad and clearing cache and history have no effect.
    Please help! Thanks.
    E.E. Prom

    Firebug shows these errors on the Develoment tildetest url:
    NetworkError: 404 Not Found - http://tildetest.cogs.indiana.edu/about-us/%3C?=$wwwRoot?%3Efiles_assets/css/img _shadow.css"
    "NetworkError: 404 Not Found - http://tildetest.cogs.indiana.edu/about-us/%3C?=$wwwRoot?%3Efiles_assets/css/vie w.css"
    "NetworkError: 404 Not Found - http://tildetest.cogs.indiana.edu/about-us/%3C?=$wwwRoot?%3Efiles_assets/javascr ipt/pform/calendar.js" 
    "NetworkError: 404 Not Found - http://tildetest.cogs.indiana.edu/about-us/%3C?=$wwwRoot?%3Efiles_assets/javascr ipt/popup.js"
    "NetworkError: 404 Not Found - http://www.cogs.indiana.edu/images/2006/dvsmall.jpg"
    "NetworkError: 404 Not Found - http://tildetest.cogs.indiana.edu/about-us/%3C?=$wwwRoot?%3Efiles_assets/css/vie w.css"
    "NetworkError: 404 Not Found - http://tildetest.cogs.indiana.edu/about-us/%3C?=$wwwRoot?%3Efiles_assets/javascr ipt/popup.js"
    "NetworkError: 404 Not Found - http://www.cogs.indiana.edu/images/2006/dvsmall.jpg" 
    Which are not present in the production site. Seems one of those missing files is messing with the links in some way. But since they aren't loaded for development, the links work as they should.

  • How to hide column link URL on status bar?

    Apex 4.1
    I have IR wit one column link target to URL, and it uses
    javascript:my_function(#COLUMN_VALUE#)as URL, that is, calls some function and passes the value of that column to the function;
    everything works fine;
    but when I place a cursor over the link, bottom line of IE9 browser (is it called a 'status bar'?) clearly shows:
    'javascript:my_function(<actual value>)'
    Is there any way to prevent it from showing function name and parameter value?
    I tried
    onmouseover="window.status='';"but it does not work

    Don't name the function in your link and hide the code in a dynamic action. See this example:
    http://apex.oracle.com/pls/apex/f?p=31517:296
    and the empno column which is a link. Explanation further down.
    Denes Kubicek
    http://deneskubicek.blogspot.com/
    http://www.apress.com/9781430235125
    http://apex.oracle.com/pls/apex/f?p=31517:1
    http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494
    -------------------------------------------------------------------

  • I can't drag a video transition into the timeline...a small x appears near the cursor

    I can't drag a video transition into the timeline...a small x appears near the cursor

    Sounds like you don't have enough handles.
    http://www.fcpbook.com/Effects1.html

  • Resize items depending on how near the cursor is

    OK...basically I have a scrolling thumbnail panel. I was
    wondering, if it's possible to make this so that images get larger
    as you move the cursor towards them, mac dock style. I can make it
    so that a movie runs to make an object grow as you hover over it,
    but this is simply to do with whether or not you are hovering over
    it, rather than how near the image's centre you are.
    I want to create the mac dock style effect! Can anyone help?
    Thanks

    ok thanks, but what action script do i need to detect the
    mouse position?
    thanks fo your help

  • How Can we force the Hyper-V Replica to use a dedicated network between two hyper-v hosts?

    Dear Team,
    How can we force Hyper-V Replica to use a dedicated network between two hyper-v hosts?
    For live migration, we can choose the desired network in Hyper-V Manager (Use these IP addresses for Live Migration).
    I have two 10G adapters teamed together, the virtual switch is created on top as converged network with several vNICs (MangementOS, LiveMigratrion, Backup, etc...)
    Each network is set with a specific VLAN to isolate the traffic.
    The two Hyper-V hosts are on the same LAN and domain.
    Thank you.
    Regards,

    I have accomplished this by using a DNS pointer specifying an IP address on that dedicated network. That will force traffic done that network.
    John Johnston

  • Is there an option to have the cursor automatically position itself over the preferred default on an option screen (like when given the options to select OK or CANCEL). I believe this feature existed on 3.6. THANKS!

    In v4 RC the cursor just sits on the lower left of screen, doesn't position itself on the recommended option when the select-option screen comes up. On previous versions of FF the cursor positioned itself over the recommended option.

    Hi blabla12345,
    (untested and without warranty)
    replace this line:
    const sSaveCUBE = "CUBE";
    with this:
    const sSaveCUBE = "cube";
    Have fun

  • Getting the cursors' icons

    Hi,
    I would like to use a cursor's icon as the icon for a JButton. How do I get, for instance ,the icon for java.awt.Cursor.DEFAULT_CURSOR?
    Thanks

    Thanks for your reply.
    I could not find the DEFAULT_CURSOR in the folder you mention. My understanding is that the cursors in this folder are the system custom cursors, and not one of the 14 cursors that are defined in the Cursor class.
    My guess is that the JVM is getting these cursors from some system file. I could try to find the cursor on the platform I am using, but that would not give a platfom independednt solution.

  • When I click certain links at the amazon sites nothing happens. The message of javascript:void(false) appears in the south left corner of the screen.

    This only happens in the amazon site and specifically in the cart page when pressing the "delete" or "save for later" options. The message appears even before i click on the option.'

    That usually indicates a JavaScript onclick action that isn't working. Such a link may also be added by a jQuery script after the page load has finished.
    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    * Firefox > Preferences > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    * Firefox > Preferences > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

Maybe you are looking for