On connecting kshuffle generation 4 to ma system i-tynes turn off sayin error...wat should i do?

on connecting kshuffle generation 4 to ma system i-tynes turn off sayin error...wat should i do?

Do you see this when you are performing the steps? In step 4, before you release the home button, do you see the Connect to iTunes screen? If you do, is iTunes running on your computer? If iTunes isn't running - launch it on your own.
If you don't see the connect to iTunes screen, start all over again. But quit iTunes and restart your computer before you try again.
Placing your device into recovery mode
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
Note: If you see the screen pictured below, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button:
If necessary, open iTunes. You should see the following "recovery mode" alert:
Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.

Similar Messages

System won't turn off, restart, hibernate or sleep after Windows 8.1 upgrade

Help, please!!
Two days ago in windows 8 store popped up an update to windows 8.1 for my pc. I am an owner of two notebook PC-s, both Lenovo, G580(which upgraded successfully without any issues, also it has intel inside) and G585(which upgraded without any issues, untill
the set up completed and it booted up, it has AMD)
So the AMD one, Lenovo G585, refuses to shut down, restart, sleep or hibernate, the only way to shut it down is to force it to turn off, meaning i have to press the power button for a couple of seconds. Along with other issues this is the only one i wasn't
able to resolve. I have contacted my Lenovo support and they said there is nothing they can do and that i can only wait for an update... and in the meantime am i supposed to let this windows 8.1 upgrade
mess up my new notebook?
Ok, so i was stupid enough not to run windows 8 backup before i started this update, silly me, thinking what could go wrong, it's not like M$ described this upgrade as something like evolution of the century,
but enough about that, i have tried every possible solution, updated my drivers, run admin cmd and typed powercfg -devicequery wake_armed - it displayed NONE, typed powercfg -lastwake - it displayed wake history count - 0, i tried entering BIOS and checking
if there is anything in there i could possibly change, found nothing, tried disabling hibernate, still nothing, and each time i try putting my pc in one of those states the screen turns off, and it all seems like the pc will any moment and yet nothing it just
stays on for countless hours unless i once again force it to shut down, also when in sleep mode no keys work for waking it up, mouse and keyboard are meaningless, the only button that works is the power button which turns it off completely and then i can turn
it on all the way from the begining, so far at least that makes me happy, but continuing like this i will mess up my PC.
PC specs:
OS - Windows 8.1 x64, came preinstalled Windows 8 x64
Processor: AMD E-300 APU with Radeon HD Graphics 1.30GHz
RAM: 4GB
Microsoft, any solutions to this one?

Last week I put a new hard drive in and loaded Windows 8 instead of Windows 7 (which I was previously using), it is a legit copy I had purchased and downloaded from Microsoft when Windows 8 first came out. I had problems with activation, called Microsoft
and they remotely connected fixing the problem. Sleep Mode worked until it did the 8.1 upgrade.Now the System will not turn off, Sleep or Hibernate. If I go to Sleep or Hibernate, the monitor turns off, hard drive turns off, but the fans are still
running. Try to wake up with mouse and nothing happens, have to hit the restart button. If I try to shut down, it does the same thing, I can only shut down by holding the button. I have tried everything suggested here, nothing has worked.
I would reload, but don't want to have to go through the problem of activating again. The system32>sfc /scannow found nothing wrong, network adapter is not allowed to wake the computer, sharing turned off, and disabled the hybrid-shutdown-feature.
Computer has been scanned and re-scanned, not infections. Video driver was re-installed. I have checked all settings in BIOS.
I was hoping that someone has found a solution to this problem.
Intel Pentium D CPU 3.73GHz
8.00GB RAM
NVIDA GeForce 9800 GT x 2 (SLI)
64-bit Windows 8.1 Pro with Media Center
No pen or touch input

Since upgrading my phone to 6.0.1, I'm using way too much data. I believe it's the podcast app that's not loading shows while I'm connected to wifi. I have the 3g turned off for podcasts??? also after a phone call or an alert it starts playing a podcast?

since upgrading my phone to 6.0.1, I'm using way too much data. I believe it's the podcast app that's not loading shows while I'm connected to wifi. I have the 3g turned off for podcasts??? also after a phone call or an alert it starts playing a podcast?

I've also had the same issues, after upgrading to IOS 6.0, the apps in my iPhone 4 were crashing and the battery life run out very fast.
The only solution worked for me was to remove all mail accounts (Exchange/Gmail) from my iPhone (in settings) and then add them back.
The crashing were stopped! also the battery was back to normal.
I found the solution by first looking at the crash logs (in IOS 6). you can find them at Settings -> General -> About (at the bottom of the About menu you will find the option that opens the logs).
There i saw many logs about Low Memory crash. 99% of the logs were pointed that the largest process (use the most memory) during the crashes is "dataaccessd".
I search in the web and found that this process is a deamon process that reponsible the Mail accounts (like Exchange/Gmail) and contancts list.
I've installed the app "System Status - activity monitor" which shows important system info like CPU usage, Memory usage and running processes.
Before apply my solution (deleting the mail accounts) i saw that the CPU usage was very high which consume the battery very fast. Also i saw that the memory (RAM) was run out.. which probably what cause the crashing..
After deleting the mail accounts (at Settings -> Mail, Contacts, Calendars) i check again with the System Status app, and saw that the memory and CPU were back to normal.
Adding the mail accounts back, still everything work ok
Hope this solution will help you too,
Enjoy!

I have a WRT54GC, and our wireless connection to the x360 is lost anytime we turn off the PC.

I have a WRT54GC that is hooked properly to the cable modem (adelphia) according to all literature... but, our wireless connection to the x360 is lost anytime we turn off the PC, which shouldn't happen. The router is connected directly to the motor. modem. We can be on line on with the pc and x360 at the same time and we have the internet connection. But both connections will also free from time to time on us. The cable HSI was just installed and we are new to this. Any assistance would be great! I'm taking my laptop home this weekend to see if I can get on wireless with it. Also (sorry) all the lights are working as they should according to the router software, but when I put the cd in ran the wizard, it tells me it can't find the router connected to my pc. I'm going batty with this. Thanks.
MC

Hi ... Mac address cloning is enabled on my router - so I guess that could be a problem, and the filmware version is 1.02.5 - we just installed this thing and haven't done any type of upgrades.
A little history - adelphia didn't connect properly - turning off the pc killed the wireless router connection and then if I hooked right into the cable modem from the pc, I didn't get a connection. So, we unplugged everything and started out fresh following the install wizard and the pc now sees the router. After that, my laptop didn't lose it's connection when the pc was shut down either. So ... the xbox was next. It seems that when we have the WEP enabled, the xbox 360 can not connect to xbox live. We did a media test first it passes the connection to the wireless network and takes the WEP key, but it fails when looking for the IP address. All DHCD information is enabled. So, we disabled the WEP and ran the console test - and it passed. We then did the media test and it obtained the IP address this time, but then failed the media connect (whatever the next test is). Not sure we actually need the media text or just the xbox live test.
I'd like to be able to use the WEP security, but we can't go live when it is enabled.
We are new to this, so appreciate any assistance!

Received a replacement ipod nano in early January . Works well in a sound system but keeps turning off when earphones are used. tried 3 pair but same result. When tried for support comes up as expires. Says I have to purchase . Why????

Received an ipod nano replacement in January. It works in a sound system but keeps turning itself of or loosing sound when earphones are used. I have tried several sets os earphones with the same result. When I just tried to seek support my Serial number comes up with warranty expired although the letter says 3 mths warranty. What gives Apple ??? Any one any advice??/

This is usually an indication that your headphones are not plugged all the way in. The white plastic part of the headphones should be flush with the Nano and no silver from the plug should still be visible. The headphone jacks on the new 6G Nanos are a bit tighter than previous generations, so it requires a bit of extra push to get the headphones to pop all the way in.
Also check make sure the jack is clear of debris such as lint.
B-rock

ITunes stops playing and cannot connect to Remote app whenever the computer display turns off??

I have a Windows system with iTunes, and an iPhone with the Remote app installed, through which I use to play music on iTunes. Until recently iTunes would play regardless of whether my monitor was on or not, and I could connect to iTunes with the Remote app regardless of the monitor state. Now, however, after updating both iTunes and Remote with the new versions that came out around the time of the iPhone 4S release, whenever my computer turns off my monitor, iTunes stops playing at the end of the current song and the Remote app cannot find iTunes. This is not a system sleep state, I just have the power options set to turn off the monitor after 15 minutes of inactivity. Sleep and hibernate are disabled on the system and always have been, expressly for the purpose of allowing iTunes playback via Remote. If I jiggle the mouse and the system turns the monitor back on then I can manually reenable playback, and Remote can connect to iTunes again. I can't find any setting in Preferences that would control this. How do I fix this? Thanks.

I'm so glad someone else is having this problem. I am in exactly the same situation!
1. Windows Vista
2. Upgraded iTunes to 10.5 and upgraded remote with iOS 5
3. My computer has never been set to sleep, but the monitor turns off after 20 mins.
4. If the monitor goes to sleep, itunes stops streaming music and Remote can't connect to it
5. If I change my monitor off time to 1 hour, then in 1 hour itunes will stop streaming - it is ABSOLUTELY connected to the monitor sleeping. Almost like iTunes can't connect to the network the the monitor is off.
Please help! I have been using remote for a year and this didn't happen until I upgraded to iTunes 10.5.

System does not turn off after halt after successful suspend-resume

I have the following problem: when I try to shut down my laptop after it resumed from suspend to ram. It seems to shut down normally until, at the very end, it reaches the system halted part (which you wouldn't even be able to read if the system would actually halt). I'm running an updated system, no testing, on an Dell Latitude E6400. The system shuts down normally if I don't suspend it.
Any ideas? What additional information do you need?

karol wrote:
iamsmrt wrote:It wouldn't accept keyboard input afterwards, not even magic keys.
I meant: turn off via 'sudo init 0' instead of 'sudo halt', not after.
Ok, wasn't sure. Isn't "sudo halt" effectively the same thing? How are they different?

9300 Curve wifi problem - cannot connect to internet using only wifi once data turned off

I've got a 9300 Curve with a data plan from Rogers. I want to use my wifi in hotspots when I go overseas without using my data. I have no problems connecting to wifi networks. Once I turn off my data services, my connections to the wifi network show that the signal is still just as strong, but I can't use my browser, facebook, bbm, etc. - message is "unable to connect to internet" when I try and access my browser. This problem occurs whether I'm using a public hotspot or my home router. I used to be able to access wifi without using data from Rogers on my older Curve (can't remember the model), so I don't think it has anything to do with my plan.
Any suggestions/advice would be much appreciated!

Thanks for the reply!
Did you mean "leave data ON and turn off data roaming"? But that would just turn off my data while I'm roaming, and while I'm not roaming, it'll still access through data and not through wifi like I would prefer. That's what I understand, but pls correct me if I'm wrong! I guess I meant to also mention that whether I'm in my home zone or overseas, I still can't use my browser, bbm, etc through wifi only, with data turned off...it just says there's no connection to the server/internet, even though it shows that I'm connected to a wifi network.

I have a problem today every time i connect a usb mouse on the macbook pro turns off.

I have a problem today every time i connect a usb mouse on the macbook pro the laptop turns off. What could i do to fix it?

Execute SMC and PRAM resets:
http://support.apple.com/kb/ht3964
http://support.apple.com/kb/ht1379
If no success, try another mouse. It may be faulty.
Ciao.

System Sound wont turn off after 1.3.1 update

I turn off the System Sounds to not here when notifications come in when I sleep, but I want to be able to here the phone ring when I call comes in...i dont wont to have to mute the whole phone... Is there a problem ticket or a break fix open on this issue...
Post relates to: Pre p100eww (Sprint)

I have the same problem. I could turn off system sounds at night which would stop the e-mail notifications, but still allow the phone to ring. After the 1.3.1 update, the systems sound slider has no effect. The only way I can mute system sounds is to turn the ringer switch off which mutes the phone completely. I contacted Sprint and they have no clue. And, of course Palm only works during weekdays and normal working hours. Palm really needs to test updates completely before releasing them. I note others are reporting similar sound problems under different headings.

Will "Find My Ipod" work if system services are turned off?

On IOS 7, If I turn off all the System Services in the Location Services will the Find My Ipod feature still work?

If location services is off FindMyiPhone will not show the iPod's location.
You still be able to wipe /erase it and have it play a sound and send a message to the iPod unless it shows as off-line.

My fifth generation iPod keeps turning off and on, what should i do?

I don't know what to do. It keeps turning on and off. The apple logo would be on and then kinda fade and it would start again. Sometimes when it fades the apple logo glitches.

Hello, Daisy411.
Thank you for visiting Apple Support Communities.
Here are some helpful troubleshooting steps to go through when experiencing this issue. This article is listed for an iPhone, but the steps also apply to your iPod touch.
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
If the issue persists, see the section labeled Issue not resolved.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Cheers,
Jason H.

System boots and turns off in seconds

My system is hp dv7 4010tx it was working perfectly and suddenly it turned off and now just power on all lights up and fan run just for seconds and turns off I have done the hard reset still nothing can u guys plz help me ?

Hi pvharis,
Thank you for joining the HP Forums! It will be hard to determine the exact cause of the problem if it doesn't stay on. At the moment it just turns for a few seconds and then dies away. There could be a problem with the battery or the power cord possible not charging properly. Do you have another power cord that you could try? Do you ever see the Num or Caps Lock keys flashing? If so how many times does it flash?
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

IMac keeps trying to connect to a NAS drive that I have turned off.

I couldn't find any other thread on this so:
I have a NAS drive (Buffalo Linkstation) on my network at home. I only use it for photos and music storage so turn it off when not in use (the auto setting doesn't work so this is the only option).
Only problem is when it's off my Mac keeps telling me "there's a problem connecting to the server......". Every time I hit OK, it reappears 15-20 seconds later.
As you can imagine it gets pretty annoying. I cannot beleive there isn't an 'ignore' or 'dont show again' setting for option this.
Anyone know how to disable it? I don't really want to remove the drive from my shared network, I just want to get rid of the message popping up all the time.
Thanks in advance!

Hi,
I have other Volumes set to be Mounted when the iMac is started listed in System Preferences> Users and Groups > Login item for My account
Obviously they can be in /Library/StartupItems for everyone to see.
I also have an app called muCommander that is likely to do it if I used the Mac User Account > Login items or the Start Up items method. (I do have a NAS drive here as well).
9:24 pm Sunday; March 2, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Firefox tries to connect to broadband when I am already connected to home wifi. How can I turn off this repeated attempt.

I boot my laptop and connect to my home wifi network. When I use Firefox, and am on msn.com or Yahoo.com, a window pops up for a connection to broadband, and it prevents the computer from moving to a link or another website unless I cancel this popup. It happens regularly while I am using Firefox to get to websites.

That is a Windows error message; beyond the scope of this forum. Looks like those two websites are trying to do something unexpected or other than "normal".
I tried to search for info about a 720 error message on Windows 8, most responses included reading the error log to see what "request" was triggering that message. That image shows that logging is enabled, so the answer "we" need is probably in that log. I don't know how to pull up that log myself, much explain how to do that to you.
My suggestion is to try a Windows 8 support forum for help with that.
http://www.eightforums.com/

On connecting kshuffle generation 4 to ma system i-tynes turn off sayin error...wat should i do?

Similar Messages

Maybe you are looking for