On DPS how can I set the layers in the correct order for adobe viewer?
How can I set it so the icons appear behind the apple the same as the first picture but for adobe viewer as well
Turn the apple into a two state MSO set to autoplay once and stop on the last image.
I have a DPS course on lynda.com you might benefit from. If you don’t have a subscription, this link will get you a 10 day trial: http://bit.ly/1xHYd0i
You should also download Bob Bringhurst’s DPS Tips app from the app store.
Similar Messages
-
How can I set default printer options on an iMac for an HP pro 8500 printer to print in draft mode?
When you use the Canon driver, the 2 sided printing is set in a different location. There is an entire menu dedicated to it (at least on my mx892). The printer dialog box has a menu selector in the middle of the screen (I think it says "layout" by default). If you click on it, you will see the duplexing options at the bottom. Much more flexibility than the single checkbox available with "airprint". The interface is unusual (at least for me) but you can pre-set up many different configurations (Fast Duplex, Fine Single-sided, B&W, Photo, etc etc.)
-
How can I set up hotmail in the mail application
Hi
How can I set the mail application to include hotmail? I've been able to add it, but it doesn't sync read and unread messages. I know iPhones used to have the same problem, but after iOS5, there was an option to include mail from hotmail. Is there an option to include hotmail now in Mail, as I can't find it.
Also, as I've just switched from Windows to Mac, is there a button on Mac for home and end like Windows has?
ThanksUnfortunately hotmail requires you to pay a fee to have your e-mail go through a mail application, like Apple Mail. Contact their customer service to see about fees, as well as set up process.
Cody -
google is my default on the home page. But when i ask for google or simply open firefox, i sometimes get google beta or google security (or whatever its name is) instead of google classic. I just want google classic. How can i set it as my default. (I have a desk top computer, use firefox, and this never happens.)
Why Apple can't undo its mistake?
Whose mistake? The source of the problem:
I was required to enter my recovery key. Now, there begins that huge flaw. I've forgotten it (I know it was my responsibility to remember it).
If you had just taken the simple steps of storing your recovery key as Apple tells you to when you set it up, none of this would've happened.
As it clearly states in the FAQ on 2-step verification: http://support.apple.com/kb/HT5570
After you turn it on, there will be no way for anyone to access and manage your account at My Apple ID other than by using your password, verification codes sent your trusted devices, or your Recovery Key. You must be responsible for:
Remembering your password.
Keeping your trusted devices physically secure.
Keeping your Recovery Key in a safe place.
If you lose access to two of these three items at the same time, you could be locked out of your Apple ID account permanently.
In addition, with two-step verification turned on, only you can reset your password, manage your trusted devices, or create a new recovery key.
Apple Support can help you with other aspects of your service, but they will not be able to update or recover these three things on your behalf.
If you aren't responsible enough to do that, you should not have turned the optional security feature on.
This is your fault, not Apple's. -
How can I set timings to increase the size of an image in a Keynote presentation?
I know how to use inspector to bring in and fade out text boxes, but at the end of a slide I have a graphic (that is at the bottom of the slide during the rest of the slide) that I want to increase the size of to take up the entire slide. How can I do this?
ThanksWelcome to Apple Support Communities.
The effect you're looking for is 'Scale'
In Keynote '09, 5.1.1 select the graphic.
Click Inspector in the tool bar, Build Inspector (3rd icon from the left), (Build In and Build Out are both set to None for this step) Effect, Action, and then Scale.
It rescales ('zooms') the selected item (image) up or down from 0% to 200%
Clicking on the More Options button at the bottom opens a drawer to the left, and gives you more control over how the build occurs, whether they happen automatically, timed, or when you click, and re-order build steps.
At 200%, double the original size, resolution could be a problem. There is a workaround, because it also scales smaller, down to 0%. So I would scale the graphic down 'small' as the first step to fit at the bottom, (even hide it behind a background-colored box) as you scale it down, and then at the end, scale up to full size to fill the screen at 'normal' resolution.
In the attached example, I use a 'scale' up to go from 100% to 130% on a map, and use arrows and a flashing line to point out the road where a specific business is located with 12 steps. Some elements in my slides have been intentionally obscured. For simplicity, I've eliminated showing any steps but the initial title and the scale. -
TS3714 how can i set an event in the calander to repeat on 2nd thurday of every month
how can i get an event to show in calander every 2nd thursday every momth
Try the app "Week Cal".
-
my iphone screen suddenly turns very large and I can't put it back to normal. I tried to turn it off and on again, but still keep the same big screen. Please advise me how can I turn it to normal size again.
Thank you, thank you, thank you! My screen images were so big that I couldn't log in or even slide the control to turn the phone off. The double tap with three fingers gave me the access I needed, and then I was able to turn zoom off via the settings as you suggested.
-
Hello everyone,
I am using Labview 8.0, and a PCI 6221 card. (windows XP).
I am using the 8 AI of the card to measure 8 Voltages (diff. mode).
The problem I have is that I get an offset except on the first channel I measure. If I set the DAQ assistant like this : AI0;AI1;AI1. This is what I measure : 0.320V;0.1695V;0.168V
I only get the offset with the first AI1 and not the second AI1 (0.168 is the correct value). I suppose the multiplexer hasn't got the time to change impedance when changing from AI0 to AI1.
I have attached a simplified version of my program where I am measuring 3 channels, and generating a square wave analog output.
My idea is to introduce a delay between the change of channels.... Is that a good idea...? and I am sure there is a very simple way to do this based on my program, but I don't know how. How long should the delay be? Or any other idea...?
Thanks for your help,
Marc
Attachments:
forum.vi 71 KBIf I choose just one channel ( AI0, AI, AI2,....or AI7) I have no offset. The offset only occurs when I set more than one channel to be measured ( but the first channel in the order of reading is always fine what ever it is). I have explained my problem in a previous post :
http://forums.ni.com/ni/board/message?board.id=170&message.id=257677&query.id=32291#M257677
I have some noise on my measures (roughly +/5 mV), so for the moment I am taking 1000 samples every 1ms on each channel and making an average of the 1000 samples.
I will try your solution : taking a look at the first points of my measures to see if the offset goes away quickly or not. However since I have been making an average on 1000 points at 1Khz, if I get a 2mV offset (after making the average), it means there are many points conerned by the offset.... I will see that anyway when looking at the 1000pts.
I don't have much experince in this, but I am surprised I have to deal with this kind of multiplex problem on a NI card. What do you think about it...? Does it surprise you...? What could I be doing wrong ?
Thanks a lot for your help anyway
Marc -
In IOS6 you could only set calendar appointments at 5 minute intervals. This was fixed in IOS7 but has reverted back in the latest release of IOS7.1. Why? IS there any way to override it. It means I have to go back to my old method of putting my actual golf tee time in the description of the appointment.
Design change with iOS 7.1. Tell Apple you don't like this here:
http://www.apple.com/feedback/iphone.html -
How can I set Paul to be the default TTS voice?
Is there a way to set a TTS voice as the default so that it is always selected by default as the voice to use? I have all the voices installed and it currently defaults to Bridget - I guess because that is the first voice in the list. I normally use Paul but sometimes others so I want access to all the voices but would like the default to be Paul. I know that once I set Paul for the first slides, it defaults for that project for the rest of the slides, but I have to do this for every project and if I forget to set Paul then I have to go back and redo the slides. It would be nice if I could set the default to the voice I use the most often. I'm using Captivate 7.
j,
In the Finder, single-click on any text file, then type command-I (Get Info). You'll see an Open With... menu item. Select Pages from the list (if it's not in the list, navigate to it). Finally, click the Change All button. Use the same process for .doc files. Now, if you double-click on any of these files, it should open in Pages.
-Dennis -
How can I set a description during the FI-TV posting (PRFI transaction)
I would like to set a description in the FI text position field (BSEG-SGTXT) during the posting of travel management (PRFI).
ThanksI've found the implementation Z_TRIP_POST_FI_IT connected to the class ZCL_IM__TRIP_POST_FI_IT. Using the methods methods IF_EX_TRIP_POST_FIEX_SGTXT and IF_EX_TRIP_POST_FIMODIFY_PTRV_DOC_IT it's possible to set a description in the field SGTXT.
-
How can I set RSBBS back to the mode 3.X
Hi.experts:
I found that if i use RSBBS to go back to R/3 for details,when I'm in analyzer,then the system jump to my portal for R/3 interface,but I just want to logon to the SAP GUI for detials,how to achieve that?
Best Regards
Martin XieBex Analyzer->Global Settings->Log on and Activate SAP GUI Connection
-
How can I set a Boolean LED the moment a trigger occurs on PFI-0
I want to turn on a front panel LED soon as I get a trigger.
Please see attachment.
Solved!
Go to Solution.
Attachments:
trigger indicator.vi 44 KBdhardy41 wrote:
Thanks LABMAT, that worked out great!
If you really wanted to thank him you would give him kudos and/or accept his post as the answer to the topic.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously. -
How can I set 50 variables with the values that are inside an array?
Hello,
I have and array of numbers and an array of strings ( the name of the variables) These values are acquired every time from hardware.
Now I created a graphical interface with 53 of these variables, and I need to create a link to update them with the correct value.
Thanks
Dario
Attachments:
Example_insert_53_values_in_53_varialbes.vi 23 KBDario,
you have posted your question to the Profibus forum. As your question is not directly related to Profibus, but to LabVIEW programming, your better should post it to the LabVIEW forum.
Thanks
Jochen -
(DPS) How can I prevent web content from playing before it's in view?
Hello
At the moment, I have some CSS3 animation, but it plays before the page is even in view. If I turn autoplay off, it means I have to tap it once the page is up.
Is there a way to tell InDesign to only play content once the page is open, but automatically? Can I call it on an event some how?
ThanksMoved to DPS.
Please post any further DPS questions here.
Set the delay on the animation to .125 seconds.
Bob
Maybe you are looking for
-
Error when opening Count for Campaigns ZSEG_D02_Q0001.
I get the attached error when opening Count for Campaigns ZSEG_D02_Q0001 on the portal. Please tell me what can be the reason behind this.
-
Can a hacked website hack my iMac?
Hi, Yesterday I visited a website I've visited a number of times that appears to be run from India. However, when I went on yesterday instead of the usual homepage the page was black and had the words "HACKED BY PREDATOR" and then two boxes came up w
-
I am trying to update my Macbook Pro with the new version of Safari, and I haven't figured out where to find it. When I go to the Apple website, there is nothing to "click" on to download it. Can anyone help? Thanks!
-
Is there a way to find out which CSS rules are being used by the different html files?
Is there a way in Dreamweaver CS3 to find out which CSS rules are being used by the different html files, sitewide? Thanks - Dave
-
How to get login ID in SQL?
Hi, How to get login Id in sql? such as "select * from table1 where userlogined=:{$loginid$}"? Best Regards, Jason Gao