On HTC Hero with Android 2.1 Fennec Alpha does not start.

Fennec Alpha is not compatible with ARMv5 or ARMv6 processors like the one in the HTC Hero, G1, Legend, Magic, Wildfire, Droid Eris, or Samsung Moment.
We have experimental nightly builds with support for these processors. You can download the ARMv5/v6 nightly build at: https://wiki.mozilla.org/Mobile/Platforms/Android
Please note that current Fennec builds are too large for some older or less powerful phones, and the user interface is not yet adapted to run on 320x480-pixel screens.

Similar Messages

I just returned from air travel with my macbook pro. It does not start up. Completely black, no sound, no life.

I just returned from air travel with my macbook pro. It does not start up. Completely black, no sound, no life. I tried command-option-power. Still dead.

SheilaArl wrote:
I just returned from air travel with my macbook pro. It does not start up. Completely black, no sound, no life. I tried command-option-power. Still dead.
I have a 2007 Macbook, so it's probably a lot older than your Macbook Pro, but it sounds like what happened to me, except that mine hadn't travelled anywhere. I pulled out the ram and blew out some dust, popped them back in, and wha-la! it turned back on and worked better than ever! Or otherwise you've got a dud/old/warped/fried battery, which is also what happened to my laptop - it got so bad it did what your laptop is doing. Ordered a new battery online and all good since then. Or otherwise, like the previous post asked, 'is it plugged in?'

HTC Hero with Android 2.1 fails to meet minimum requirements

System requirements states android 2.0+ needed. My Orange HTC Hero is upgraded to 2.1-update1
Firefox installs but won't run;
"This device does not meet the minimum system requirments for Firefox"

For full system requirements, and an experimental version for phones with ARMv6 processors like the Hero, see: https://wiki.mozilla.org/Mobile/Platforms/Android

Chinese characters are displayed as blank box on the TextField in The new HTC One with Android 4.4.2

I use the AIR SDK is 4.0.0.1628, mobile phone is The new HTC One with Android 4.4.2 in Taiwan.
When the application installed on the The new HTC One with Android 4.4.2, chinese characters in TextField displayed as blank.
Hope it can be fixed as soon as possible.
The test code:
package
          import flash.display.Sprite;
          import flash.display.StageAlign;
          import flash.display.StageScaleMode;
          import flash.text.Font;
          import flash.text.TextField;
          import flash.text.TextFieldAutoSize;
          import flash.text.TextFormat;
          public class TestFont extends Sprite
                    public function TestFont()
                              stage.scaleMode = StageScaleMode.NO_SCALE;
                              stage.align = StageAlign.TOP_LEFT;
                              var sprite:Sprite = new Sprite();
                              var value1:String = "简体中文测试";
                              var value2:String = "繁體中文測試";
                              var txt11:TextField = createTextField(null, "11 "+value1);
                              txt11.x = 10;
                              txt11.y = 10;
                              sprite.addChild(txt11);
                              var txt12:TextField = createTextField(null, "12 "+value2);
                              txt12.x = txt11.x + txt11.width;
                              txt12.y = txt11.y;
                              sprite.addChild(txt12);
                              var txt21:TextField = createTextField("STHeitiTC-Medium","21 "+value1);
                              txt21.x = 10;
                              txt21.y = txt11.y + txt11.height;
                              sprite.addChild(txt21);
                              var txt22:TextField = createTextField("MSYH","22 "+value2);
                              txt22.x = txt21.x + txt21.width;
                              txt22.y = txt21.y;
                              sprite.addChild(txt22);
                              var lastY:int = txt22.y + txt22.height;
                              var fonts:Array = Font.enumerateFonts(true);
                              var index:int = 0;
                              for each (var font1:Font in fonts)
                                        index++;
                                        var txtF:TextField = createTextField(font1.fontName, index + "/" + fonts.length + " " + font1.fontName + " "+value1 +" " + value2);
                                        txtF.x = 10;
                                        txtF.y = lastY;
                                        sprite.addChild(txtF);
                                        lastY += txtF.height;
                              addChild(sprite);
                    public function createTextField(font:String, value:String):TextField{
                              var txt:TextField = new TextField();
                              txt.autoSize = TextFieldAutoSize.LEFT;
                              var format:TextFormat = new TextFormat();
                              if(font != null){
                                        format.font = font;
                                        txt.defaultTextFormat = format;
                                        txt.setTextFormat(format);
                              txt.text = value;
                              var dformat:TextFormat = txt.defaultTextFormat;
                              if(dformat != null){
                                        txt.text = value + " |" + dformat.font;
                              if(font != null){
                                        txt.setTextFormat(format);
                              return txt;

I am in mainland China, my Nexus7 can display chinese characters, but my friend in Taiwan, his android4.4.2 display chinese characters as blank.
I don't understand the reason.
By the way, TextFormat.font don't work, whatever I set any fonts, display are the same.
My screenshots:
Taiwan's screenshots:

I have a Ipod touch and recently added new music to my itunes library on my laptop. When I sync with my ipod, the new music does not show up on my ipod even though the sync process seems to be working.

I have an Ipod touch and recently added new music to my Itunes library. When I sync with the library, the new music does not show up on my ipod. The sync process seems to be working and there is still plenty of space on the Ipod for new music so I'm not sure what the problem is!

What happens when you try to sync?
Was the iPod previous synced to another iTunes library/computer?
Have you successfully synced from this iTunes library/computer before?
Do the songs play in iTunes?
Do you have the right boxes checked to sync?
iTunes: Syncing media content to iOS devices and iPod
Do you have any Restrictions (Settings>General>Restrictions) set that would prevent syncing those songs?

I bought a new imac running Loin and Office 2011. The server we use to access emails runs exchange 2003 and my IT person says the imac is not compatible with the server. The server does not want to let me access using any email software.

I bought a new imac running Loin with Office 2011. I am the only mac in the office and the Server we use to access emails runs exchange 2003 and my IT person says the imac is not compatible with the server. The server does not want to let me access using any email software other than webmail access through our website. It looks as though 2011 is not compatible with 2003 per some searches online, but what are some options I have to gain full access again? I purchased parallels in hopes that this my help and I am able to use remote desktop connection to log on to server but can not drag and drop files I need. There is a shared drive on that Server we all use to exchange files.
The two main issues are gaining access to my email again and ability to drag and drop files from mac to pc. I hope this is enough info to get some solutions.
PS - IT person says my iMac's IP is what his server does not understand so that is why I can not login.

Office 2011 is not compatbile with Exchange 2003.
I suggest you post further Office related questions on Microsoft's own forums for their Mac software:
http://answers.microsoft.com/en-us/mac

Changed my AppleID and password - now can't log-in to iCloud with my deleted account. It does not accept my passwords - old or new. I cannot delete my old iCloud on phone

iPhone 5S on iOS7 -
I changed my AppleID and password online.
My iPhone keeps prompting me to log-in to iCloud with my deleted account. It does not accept my passwords - old or new. I cannot delete my old iCloud account because it requires that I enter

Hi suefrombenton,
Please see this previous discussion on how to change an Apple ID on an iOS device -
How do I change my Apple ID on my iPad? | Apple Support Communities
https://discussions.apple.com/thread/4431720
Thanks for using Apple Support Communities.
Best,
Brett L

HT1351 my latest version of itunes with all my music on it, will not start downloading the music to my ipod 7th gen. 160gb ipod

my latest version of itunes with all my music on it, will not start downloading any music at all from itunes, and the icon showing my ipod 'plugged in' in the left side of menu is not showing, and this is a brand new ipod.

Maybe:
iTunes: How to re-create your iTunes library and playlists
No content shows up in iTunes after updating

I have a big problem with Lion and PGP. After upgrading from snow leopard to lion I cannot access my PGP drive which was generated under snow leopard. PGP does not start but gives a notion that lion cannot work with my PGP version. Solution?

After upgrading from Snow Leopard to Lion I cannot access a PGP drive which was generated under snow leopard. PGP does not start. When I try to start I just receive a message that Lion cannot work with PGP. How can I now access important and confifential informatio which I have stored in PGP (snow leopard). Do I have to move back to snow leopard. If so, how can I do this?

If you have this product,
http://www.symantec.com/business/support/index?page=content&id=TECH165159
you have to go back to Snow Leopard.
To re-install SL, back up your home directory, format and re-install.

This.print(pp) with interactive type silent or automatic does not work after upgrade acrobat reader 9 to acrobat reader 11

After an upgrade of acrobat reader 9 to acrobat reader 11 the automatic printing of a pdf. The pdf is opened, but the print does not happen. With acrobat reader 9 it works. But with acrobat reader 11 the printing does not happen.
I discovered when you specify pp.constants.interactionLevel.full it works on acrobat reader 11. But when you specify pp.constants.interactionLevel.silent or pp.constants.interactionLevel.automatic it does not work on acrobat reader 11. But with the full option we have a dialog print box
we do not want.
In our jsp we load a pdf document and create a message handler to detect the print events of a pdf document that is in an <object> tag.
In the pdf document we add
package be.post.lpo.util;
import org.apache.commons.lang.StringEscapeUtils;
import org.apache.commons.lang.StringUtils;
public class AcrobatJavascriptUtil {
    public String getPostMessageToHostContainer(String messageName, String messageBody){
        return "var aMessage=['"+messageName+ "', '"+ messageBody+"'];this.hostContainer.postMessage(aMessage);";
    public String getAutoPrintJavaScript(String interactiveType, String printerName,String duplexType) {
        String interactiveTypeCommand = "";
        if (StringUtils.isNotBlank(interactiveType)){
            interactiveTypeCommand = "pp.interactive = " + interactiveType + ";";
        String duplexTypeCommand = "";
        if (StringUtils.isNotBlank(duplexType)){
            duplexTypeCommand = "pp.DuplexType = " + duplexType + ";";
        return "" + // //
                "var pp = this.getPrintParams();" + // //
                // Nointeraction at all dialog, progress, cancel) //
                interactiveTypeCommand + //
                // Always print to a printer (not to a file) //
                "pp.printerName = \"" + StringEscapeUtils.escapeJavaScript(printerName) + "\";" + //
                // Never print to a file. //
                "pp.fileName = \"\";" + //
                // Print images using 600 DPI. This option MUST be set or some barcodes cannot //
                // be scanned anymore. //
                "pp.bitmapDPI = 600;" + //
                // Do not perform any page scaling //
                "pp.pageHandling = pp.constants.handling.none;" + //
                // Always print all pages //
                "pp.pageSubset = pp.constants.subsets.all;" + //
                // Do not autocenter //
                "pp.flags |= pp.constants.flagValues.suppressCenter;" + //
                // Do not autorotate //
                "pp.flags |= pp.constants.flagValues.suppressRotate;" + //
                // Disable setPageSize i.e. do not choose paper tray by PDF page size //
                "pp.flags &= ~pp.constants.flagValues.setPageSize;" + //
                // Emit the document contents. Document comments are not printed //
                "pp.printContent = pp.constants.printContents.doc;" + //
                // printing duplex mode to simplex, duplex long edge, or duplex short edge feed //
                duplexTypeCommand +
                // Print pages in the normal order. //
                "pp.reversePages = false;" + //
                // Do the actual printing //
                "this.print(pp);";
snippets for java code that adds
package be.post.lpo.util;
import org.apache.commons.lang.StringUtils;
import com.lowagie.text.Document;
import com.lowagie.text.DocumentException;
import com.lowagie.text.pdf.PdfAction;
import com.lowagie.text.pdf.PdfDestination;
import com.lowagie.text.pdf.PdfImportedPage;
import com.lowagie.text.pdf.PdfName;
import com.lowagie.text.pdf.PdfReader;
import com.lowagie.text.pdf.PdfWriter;
import java.io.IOException;
import java.io.InputStream;
import java.io.OutputStream;
import java.util.ArrayList;
import java.util.Iterator;
import java.util.List;
public class PdfMergerUtil{
    private static final PdfName DID_PRINT = PdfName.DP;
    private static final PdfName WILL_PRINT = PdfName.WP;
    private List<PdfActionJavaScriptHolder> actionJavaScripts = new ArrayList<PdfActionJavaScriptHolder>();
    private class PdfActionJavaScriptHolder{
        private final PdfName actionType;
        private final String javaScript;
        public PdfActionJavaScriptHolder(PdfName actionType, String javaScript) {
            super();
            this.actionType = actionType;
            this.javaScript = javaScript;
        public PdfName getActionType(){
            return this.actionType;
        public String getJavaScript(){
            return this.javaScript;
    public void writePdfs(OutputStream outputStream, List<InputStream> documents, String documentLevelJavaScript) throws Exception {
        Document document = new Document();
        try {
          // Create a writer for the outputstream
          PdfWriter writer = PdfWriter.getInstance(document, outputStream);
          document.open();
          // Create Readers for the pdfs.
          Iterator<PdfReader> iteratorPDFReader = getPdfReaders(documents.iterator());
          writePdfReaders(document, writer, iteratorPDFReader);
          if (StringUtils.isNotBlank(documentLevelJavaScript)){
              writer.addJavaScript(documentLevelJavaScript);
          addAdditionalActions(writer);
          outputStream.flush();
        } catch (Exception e) {
            e.printStackTrace();
            throw e;
        } finally {
            if (document.isOpen()){
                document.close();
            try {
                if (outputStream != null){
                    outputStream.close();
            } catch (IOException ioe) {
                ioe.printStackTrace();
                throw ioe;
    public void addAdditionalDidPrintAction(String javaScript){
        actionJavaScripts.add(new PdfActionJavaScriptHolder(DID_PRINT, javaScript));
    public void addAdditionalWillPrintAction(String javaScript){
        actionJavaScripts.add(new PdfActionJavaScriptHolder(WILL_PRINT, javaScript));
    private void writePdfReaders(Document document, PdfWriter writer,
            Iterator<PdfReader> iteratorPDFReader) {
        int pageOfCurrentReaderPDF = 0;
          // Loop through the PDF files and add to the output.
          while (iteratorPDFReader.hasNext()) {
            PdfReader pdfReader = iteratorPDFReader.next();
            // Create a new page in the target for each source page.
            while (pageOfCurrentReaderPDF < pdfReader.getNumberOfPages()) {
              document.newPage();
              pageOfCurrentReaderPDF++;
              PdfImportedPage page = writer.getImportedPage(pdfReader, pageOfCurrentReaderPDF);
              writer.getDirectContent().addTemplate(page, 0, 0);
            pageOfCurrentReaderPDF = 0;
    private void addAdditionalActions(PdfWriter writer) throws DocumentException{
        if (actionJavaScripts.size() != 0 ){
            PdfAction action = PdfAction.gotoLocalPage(1, new PdfDestination(PdfDestination.FIT), writer);
            writer.setOpenAction(action);
            for (PdfActionJavaScriptHolder pdfAction : actionJavaScripts ){
                if (StringUtils.isNotBlank(pdfAction.getJavaScript())){
                    action = PdfAction.javaScript(pdfAction.getJavaScript(), writer);
                    writer.setAdditionalAction(pdfAction.getActionType(), action);
    private Iterator<PdfReader> getPdfReaders(Iterator<InputStream> iteratorPDFs) throws IOException {
        List<PdfReader> readers = new ArrayList<PdfReader>();
          while (iteratorPDFs.hasNext()) {
            InputStream pdf = iteratorPDFs.next();
            PdfReader pdfReader = new PdfReader(pdf);
            readers.add(pdfReader);
        return readers.iterator();
JSP code
<script type="text/javascript" src="<bean:message key="scripts.js.internal.jquery" bundle="app"/>"></script>
    <script language="javascript">
    function goToDidPrintUrl(){
        var url = "<%=didPrintUrl%>";
        window.location.assign(url);
    function createMessageHandler() {
        var PDFObject = document.getElementById("myPdf");
        PDFObject.messageHandler = {
            onMessage: function(msg) {
                 if (msg[0] == "WILL_PRINT"){
                    $("#printingTransitFeedBackMessage").text('<%=willPrintMessage%>');
                 if(msg[0] == "DID_PRINT"){
                    $("#printingTransitFeedBackMessage").text('<%=didPrintMessage%>');
                    setTimeout('goToDidPrintUrl()',4000);
            onError: function(error, msg) {
                alert(error.message);
    </script>
</head>
<body onLoad="createMessageHandler();">
<div id="printingTransitFeedbackArea">
<div class="info" id="printingTransitFeedBackMessage"><%=documentOpenMessage%></div>
</div>
<object id="myPdf" type="application/pdf" width="100%" height="100%" data="<%=toBePrintedUrl%>">
</object>
</body>

From the JS API Reference of the print method:
Non-interactive printing can only be executed during batch, console, and menu
events.
Outside of batch, console, and menu events, the values of bUI and of interactive are ignored
and a print dialog box will always be presented.

Does not start up with last viewed Tabs even though chosen in options?

V 4.01 with Vista. Even after choosing the correct option in options>options>General FF does not start up with the last session of Tabs and Windows. It always opens with a single blank Tab. What am I doing wrong?

Make sure that you do not use [[Clear Recent History]] to clear the "Browsing History" if Firefox is closed because that prevails and prevents Firefox from opening tabs from the previous session.
If you use CCleaner then make sure that Session is unchecked in the settings for the Firefox application.

After updating my iphone5, my phone went back to factory setting and now I can't sign in with my apple id because it does not recognise it... Help?!

After updating my iphone5, my phone went back to factory setting and now I can't sign in with my apple id because it does not recognise it... Help?!

Yes, my telco is an approved carrier. If my phone was brand new, I think so, they opened it in front of me.. I really couldn't remember it was 1.4 years ago. It did seem new.
Well it says, "_____" cannot be used to unlock this iphone. I've tried both my apple ids but it didn't work.

I applied a template to a page with SWFs and now that page does not play the SWFs. Why?

I applied a template to a page with SWFs and now that page does not play the SWFs (just a blank area where the SWF should be). When I detach the template it will play the flash file. This site will eventually be updated via Adobe Contribute. And I just discovered that when applying a template to a page that uses HTML datasets (Master/Detail),it no longer reads the Master/detail regions and displays a blank. Any thoughts?
[Moved to Dreamweaver forum by moderator]

Firstly, you shouldn't really 'apply' a template to a page, you should create a child page by going to FILE>NEW>Page from Template. Too many things can happen when applying a template the way you are doing it. eg:; editable and non-editable regions not matching up and being asked where to place these regions and in all likelihood, you end up with 2 or more of the same region.
When a swf file is inserted into a page, a corresponding Scripts folder is written automatically is stored in the root of the site - it is also linked to in the head of the document. What I believe is happening is that when you apply a template to the page, the Template has no idea that there is a swf file on the page and is not aware of the correct link to the Scripts folder. If you do a test and add the swf file to the template page itself, I bet that the links to the swf and the scripts folder are correct - because DW knows the correct path to the script file. Hence the reason the page probably works when you detach it from a template.

I used Roxio VHS to DVD for Mac (have iMac with Snow Leopard) and the audio does not synch with the video when playing in iMovie. Any suggestions to fix?

I used Roxio VHS to DVD for Mac (have iMac with Snow Leopard) and the audio does not synch with the video when playing in iMovie. Any suggestions to fix?

Thanks for the reply. I tried playing with detaching the audio in iMovie, but with 20+ hours of video to correct, it would take too long. After 28 hours, Corel/Roxio tech support replied that it is a known bitrate mismatch problem and they have no real fix. I strongly suggest not to buy this product.

Error: response does not start with HTTP

hi,
i am using a MIDP class to send a string to a java servlet which then returns a .gif image. the string is being successfully to the servlet, but an exception is being thrown when the image is being sent back.
java.io.IOException: response does not start with HTTP it starts with: GIF89aï4
at com.sun.midp.io.j2me.http.Protocol.readResponseMessage(Protocol.java:2166)
at com.sun.midp.io.j2me.http.Protocol.finishRequestGetResponseHeader(Protocol.java:1934)
at com.sun.midp.io.j2me.http.Protocol.sendRequest(Protocol.java:1598)
at com.sun.midp.io.j2me.http.Protocol.sendRequest(Protocol.java:1517)
at com.sun.midp.io.j2me.http.Protocol.openInputStream(Protocol.java:484)
my code is as follows in the midp class :
HttpConnection c = null;
InputStream is = null;
StringBuffer sb = new StringBuffer();
String url="http://localhost:8090/ProjectServer/createMap";
url=url+"?Source="+src+"&Destination="+dest;
try {
c = (HttpConnection)Connector.open(url,Connector.READ_WRITE, true);
c.setRequestMethod(HttpConnection.GET); //default
//is = c.openDataInputStream();
is = new DataInputStream(c.openInputStream()); //openInputStream(); // transition to connected!
Image im=null;
try
ByteArrayOutputStream bStrm = new ByteArrayOutputStream();
int ch;
while ((ch = is.read()) != -1)
bStrm.write(ch);
// Place into image array
byte imageData[] = bStrm.toByteArray();
// Create the image from the byte array
im = Image.createImage(imageData, 0, imageData.length);
finally
// Clean up
if (is != null)
is.close();
the code in the servlet is as follows :_
ServletContext sc = getServletContext();
// Get the MIME type of the image
String mimeType = sc.getMimeType("route.gif");
if (mimeType == null) {
sc.log("Could not get MIME type ");
response.setStatus(HttpServletResponse.SC_INTERNAL_SERVER_ERROR);
return;
// Set content type
response.setContentType(mimeType);
// Set content size
response.setContentLength((int)file.length());
// Open the file and output streams
FileInputStream in = new FileInputStream(file);
OutputStream outstream = response.getOutputStream();
// Copy the contents of the file to the output stream
byte[] buf = new byte[1024];
int count = 0;
while ((count = in.read(buf)) >= 0) {
outstream.write(buf, 0, count);
in.close();
outstream.close();
il be immensely grateful if some1 cud tell me whre i am gng wrong.
thnx,
nev

Hi, I�m trying to do the same as above, get MP3 from a Shoutcast server.
I got the same fault ("response does not start with HTTP it starts with: ICY") when I tried to open an HttpConnection as bellow:
============================================
HttpConnection conn = (HttpConnection) Connector.open("http://64.236.34.196/stream/1074");
Then I tried to open a socket connection as bellow:
======================================
SocketConnection conn = (SocketConnection) Connector.open("socket://64.236.34.196:80");
String get = "GET /stream/1074 HTTP/1.1";
DataOutputStream os = conn.openDataOutputStream();
os.writeUTF(get);
InputStream is = conn.openInputStream();
But then I got the following error:
=========================
java.lang.SecurityException: Target port denied to untrusted applications
Could someone help me to find out what is going on?
Thanks a lot!

On HTC Hero with Android 2.1 Fennec Alpha does not start.

Similar Messages

Maybe you are looking for