On installing labview I get "error 1638 occurred..."

Hi I am trying to reinstall labview 6.1 on my PC after a hard disk crash. I get kicked out with the message "Error 1639 occurred while installing LabView 6.1". The machine is running Win2000 Professional.
I don't find any info as to what this eror message might mean. Any suggestions?
...Thanks in advance, Peter Grigg

Peter;
Since you had installed the same copy of Labview before, the CD is probably in good shape.
Things you can try:
- Double check if you are logged on with administrator privilegies. If you are not, try to install Labview from an administrator account
- There was a problem with the Labview installer that is reported as fixed, that stated that error 1639 would show up if one tries to type double quotes (") in the Organization Field during the install. Double check if you are doing that
Other than those two, you can try to install the same copy on a different machine to see if the same error shows. If it doesn't, there is something wrong with the installation of the OS on the machine that is giving you the error.
Hope this helps.
Filipe A.
Applications Engineer
National Instruments

Similar Messages

  • Trying to install LabVIEW and getting error 1935

    I am trying to install LabVIEW on my computer and I am getting the following error:
    Error 1935. An error occurred during the installation of assembly 'Microsoft.MSXML2R, processorArchitecture="x86",type="win32"...
    Please refer to Help and support for more information. HREULT: 0x80070002.
    I have the option to continue installation, but at the end it fails anyways.
    Thanks for your help.

    If it is the same as shown in my previous reply, this is what NI recommends:
    "Solution: This error during installation is commonly caused by restrictions placed on your system by spyware blocking software such as Ad-Aware, etc. Turn off any spyware blocking software and try the installation again."

  • Why do I get "Error 1 occured at Config Data Registry.vi(get data) invalid object 0" while starting my application?

    Why do I get "Error 1 occured at Config Data Registry.vi(get data) invalid object 0" when starting my application created in LabVIEW 7.1?  I am starting the application in a PXI rack running Windows XP.  I have an executable written in LabVIEW 7.0 that runs without this error.  After clicking the Continue button in the error, the application seems to continue happily.
    Is there something I need to include when I make the executable?
    I would like to understand and eliminate this start up error.
    Thanks in advance.
    BobNorth

    Hi Bob,
    I looked through the program and I figured out where the error is coming from, and potentially what is causing it. In a lot of the cases of the program you are searching a 1-D array for the name of the case, and if you don't find it then it skips the function and gives "Error 1 occurred at Config Data Registry.vi(CASENAME) invalid object 0". I attached a screenshot that shows what I mean. The Search 1-D Array.vi is returning a -1 which means it didn't find the case. The reason I believe this is happening is because the shift register for that array is not initialized. While the other cases "reset" and "register" interact with the array shift registers and most likely create the array you need, if the program defaults to the "get data" case then it will try to run that before registering and won't have an array to search. This would also explain why it only has this problem at first and seems to run just fine after that. To fix this you should either make an initial array and wire it into the shift register or make the "reset" case the default as opposed to the "get data" case.
    Regards,
    Peter W.
    Attachments:
    Config Data Registry.png ‏55 KB

  • Every time I try to install iTunes i get error message 2329.

    Every time I try to install iTunes i get error message 2329. This is really ticking me off and I would appreciate any help.

    Here is an article from the apple support website that might help out.
    http://support.apple.com/kb/HT1926?viewlocale=en_US

  • TS1406 having problems installing itunes on computer so I can sysc with iphone.  had to download only then installed itunes.  getting error trying to install AppleMobileDevice64.

    having problems installing itunes on computer so I can sysc with iphone.  had to download only then installed itunes.  getting error trying to install AppleMobileDevice64.

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any Apple Mobile Device Support entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • When installing Adobe Presenter, get error message plattform not compatible.

    When installing Adobe Presenter, get error message plattform not compatible.

    Check the tech specs to see if your system meets the minimum requirements for the software.

  • HT1338 Update bundle just released for Aperture 3.4.2, Safari 6.0.2, and iPhoto 9.4.2 will not install.  Keep getting error "The operation couldn't be completed. (NSURLErrorDomain error -3001.)(102)"  Any one else having this issue?  Please help.

    Update bundle just released for Aperture 3.4.2, Safari 6.0.2, and iPhoto 9.4.2 will not install.  Keep getting error "The operation couldn't be completed. (NSURLErrorDomain error -3001.)(102)"  Any one else having this issue?  Please help.

    Hi there!
    Yes, same problem too; I've already sent an email to apple support and just received a very vague and unpractical response with "call apple support in your country" as main advice. I've obviously emailed back stating that I need a clearer response and I don not have any intention to spend money calling for support when updates is a free tool. I do also believe this is a probem generated on Apple's end, I just wish they learned to say "sorry, it's us;  working on it!"
    Message was edited by: MacLuc

  • When trying to re-install itunes i get error HRRESULT:0x8007054F what does this mean?

    I am useless with technology and desperately need help!  When trying to re-install itunes i get error HRRESULT:0x8007054F what does this mean? I have followed step by step guide to de-install then re-install itunes as instructed when i couldnt connect my new ipad to my computer to synchronise it with my exisiting itunes account initially set up with my ipod. I successfully re-nstalled itunes but it wouldnt open and told me to de-install and re-install again.  This has repeated several times and now i get this error message. I dont know what to do next? 

    HRRESULT: 0x8007054F
    These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
    Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
    If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 8007054F, or some other number? (If they're another number, what number are you getting?)

  • My phone will not let me restore it, I tried several times and when I install the frimware gets error and nothing is installed. What can I do?

    My phone will not let me restore it, I tried several times and when I install the frimware gets error and nothing is installed. What can I do?

    My phone will not let me restore it, I tried several times and when I install the frimware gets error and nothing is installed. What can I do?

  • Labview 9.0: Error 1 occurred at Write To Measurement File

    Hi
    Our University recently got the latest version of Labview (9.0 32-bit) which I installed today.The labview file I am using (my6008v6.vi)  used to work fine with the older version (8.5 i think). My write-to-file VI is enabled at certain time intervals in order to log data. As soon as it is enabled for the second time I get the following error:
    Error 1 occurred at Write To Measurement File->Copy of murray6008v6.vi
    Possible reason(s):
    LabVIEW:  An input parameter is invalid. For example if the input is a path, the path might contain a character not allowed by the OS such as ? or @.
    =========================
    NI-488:  Command requires GPIB Controller to be Controller-In-Charge.
    I made a simple file (simplew2f.vi) to test this, with a button which I can press to enable/disable the writing of data. I am able to start writing data and then stop writing data but as soon as I try resume the writing the same error occurs.
    This confuses me greatly since this wasn't a problem using the old version and my Labview knowledge is minimal. Any help would be appreciated.
    Attachments:
    my6008v6.vi ‏214 KB
    simplew2f.vi ‏64 KB

    So, which VI are you having problems with?  Sounds like both...
    Okay... - sigh - where to start....   
    Well..  Let's start with a few comments. 
    1.  Try to stay away from the Express VI.  I know the Marketing guys at NI will not like me for saying so, but I am saying so.  They are a nice marketing feature that Grumpy Old Men like myself do not like.   They make it easy to write quick code..  And I will limit my comments to that.  (It's not your fault.. )
    2.  The wiring on your diagram is not clear or easy to read.  Yes, with additional time and double-clicking each wire I can tell where they are going.  However, a rule of thumb, alway wire from Left to Right.  Never right to left.  And do not run the wires under objects, even the ones you are wiring to.
    3.  simplew2f.vi:  You should put a small delay in the While Loop.  I ran it three times and it wrote to the files without error.  And yes, I used LV2009.
    4.  my6008v6.vi:  Avoid wiring from the top of the While Loop.  At frist, it looked like the data was coming out of the While Loop because the wires went to the left side of all the index node of the Index Array function.  
    You should set your Browse Option for the file path to "Files or Folders" and "New or existing".  I did that and I was not getting the error message you described.
    R
    Message Edited by Ray.R on 03-03-2010 08:33 AM
    Attachments:
    pathProperty.PNG ‏13 KB

  • Plugin install problem - Sorry, an error has occured

    Hi,
    We are having problem's with our QuickTime plugin code. We are using the object and embeded tag and are using the following url http://www.apple.com/qtactivex/qtplugin.cab for the codebase attribute. We are redirected to this url, http://wsidecar.apple.com/cgi-bin/qtc/nph-QuickTime.hqx and the only thing that happens here is that we get a the following error:
    Sorry, an error has occured. Please try again
    redx1
    Go back to the form page.
    Anybody else experiencing this problem recently?
      Windows XP   Internet Explorer

    If you are trying to install Itunes for Windows and it dies with the -3 error when trying to install QuickTime, here is your fix. You will have to edit the registry so follow this carefully and back up the registry before changing it, just in case.
    1. Do a Start,Run, and type in regedit then OK.
    (This opens the registry file.
    2. Navigate to HKeyClassesRoot\Installer\Products
    3. Right click on Products and use the "find" command in regedit and search for QuickTime.
    4. Delete the part of the Products Tree Key that you find.
    Mine was located here:
    HKEYCLASSESROOT\Installer\Products\6E804929562D471408F5181D9D412E4A
    5. You will now be able to install QuickTime and Itunes without getting the -3 error.
    Use caution when editing the registry which should not be attempted unless you are beyond a neophyte computer user.
    I tried everything under the sun, when I had this same problem until I hit upon this fix.

  • Install-ADServiceAccount : An unspecified error has occurred

    Hi. I have two Windows Server 2012 R2 installed in test network. One is DC, another is SQL server (CM0 named).
    Now, i would like to configure start SQL service as MSA.
    I have created MSA on DC. Assigned to SQL server, and now i try to install this MSA on SQL server:
    PS C:\> New-ADServiceAccount -Name TESTMSA -Enabled $true -DNSHostName CM0
    PS C:\> Add-ADComputerServiceAccount -Identity CM0 -ServiceAccount TESTMSA
    on SQL server:
    PS C:\> Get-ADServiceAccount -Identity TESTMSA -Properties *
    AccountExpirationDate :
    accountExpires : 9223372036854775807
    AccountLockoutTime :
    AccountNotDelegated : False
    AllowReversiblePasswordEncryption : False
    AuthenticationPolicy : {}
    AuthenticationPolicySilo : {}
    BadLogonCount : 0
    badPasswordTime : 0
    badPwdCount : 0
    CannotChangePassword : False
    CanonicalName : voo.domain.com/Managed Service Accounts/TESTMSA
    Certificates : {}
    CN : TESTMSA
    codePage : 0
    CompoundIdentitySupported : {False}
    countryCode : 0
    Created : 17.07.2014 10:26:38
    createTimeStamp : 17.07.2014 10:26:38
    Deleted :
    Description :
    DisplayName :
    DistinguishedName : CN=TESTMSA,CN=Managed Service Accounts,DC=voo,DC=domain,DC=com
    DNSHostName : CM0
    DoesNotRequirePreAuth : False
    dSCorePropagationData : {01.01.1601 01:00:00}
    Enabled : True
    HomedirRequired : False
    HomePage :
    HostComputers : {CN=CM0,OU=servers,OU=sity,DC=voo,DC=domain,DC=com}
    instanceType : 4
    isCriticalSystemObject : False
    isDeleted :
    KerberosEncryptionType : {RC4, AES128, AES256}
    LastBadPasswordAttempt :
    LastKnownParent :
    lastLogoff : 0
    lastLogon : 0
    LastLogonDate :
    localPolicyFlags : 0
    LockedOut : False
    logonCount : 0
    ManagedPasswordIntervalInDays : {30}
    MemberOf : {}
    MNSLogonAccount : False
    Modified : 17.07.2014 10:26:38
    modifyTimeStamp : 17.07.2014 10:26:38
    msDS-HostServiceAccountBL : {CN=CM0,OU=servers,OU=sity,DC=voo,DC=domain,DC=com}
    msDS-ManagedPasswordId : {1, 0, 0, 0...}
    msDS-ManagedPasswordInterval : 30
    msDS-SupportedEncryptionTypes : 28
    msDS-User-Account-Control-Computed : 0
    Name : TESTMSA
    nTSecurityDescriptor : System.DirectoryServices.ActiveDirectorySecurity
    ObjectCategory : CN=ms-DS-Group-Managed-Service-Account,CN=Schema,CN=Configuration,DC=voo,D
    C=domain,DC=com
    ObjectClass : msDS-GroupManagedServiceAccount
    ObjectGUID : fda9060b-0c24-4c6c-8756-bcb3622f0755
    objectSid : S-1-5-21-1811451803-3665653429-3710297301-1176
    PasswordExpired : False
    PasswordLastSet : 17.07.2014 10:26:38
    PasswordNeverExpires : False
    PasswordNotRequired : False
    PrimaryGroup : CN=Domain Computers,CN=Users,DC=voo,DC=domain,DC=com
    primaryGroupID : 515
    PrincipalsAllowedToDelegateToAccount : {}
    PrincipalsAllowedToRetrieveManagedPassword : {}
    ProtectedFromAccidentalDeletion : False
    pwdLastSet : 130500591980747733
    SamAccountName : TESTMSA$
    sAMAccountType : 805306369
    sDRightsEffective : 15
    ServicePrincipalNames :
    SID : S-1-5-21-1811451803-3665653429-3710297301-1176
    SIDHistory : {}
    TrustedForDelegation : False
    TrustedToAuthForDelegation : False
    UseDESKeyOnly : False
    userAccountControl : 4096
    userCertificate : {}
    UserPrincipalName :
    uSNChanged : 215990
    uSNCreated : 215987
    whenChanged : 17.07.2014 10:26:38
    whenCreated : 17.07.2014 10:26:38
    PS C:\> Install-ADServiceAccount -Identity "TESTMSA"
    Install-ADServiceAccount : Cannot install service account. Error Message: 'An unspecified error has occurred'.
    At line:1 char:1
    + Install-ADServiceAccount -Identity "TESTMSA"
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo : WriteError: (TESTMSA:String) [Install-ADServiceAccount], ADException
    + FullyQualifiedErrorId : InstallADServiceAccount:PerformOperation:InstallServiceAcccountFailure,Microsoft.ActiveD
    irectory.Management.Commands.InstallADServiceAccount
    goooooogle doesn't help me (
    Thank you!

    Marius
    Ene
    - with $a - same. about supporting - the link is about 2008 R2. I think MSA and gMSA was a little bit changed on 2012 R2.
    about gMSA. I don't understand this key: 
    -PrincipalsAllowedToRetrieveManagedPassword ITFarmHosts
    what means ITfarmsHosts? is it some computer\user group or that?
    PS C:\> New-ADServiceAccount TEST-gMSA -DNSHostName test-gmsa -PrincipalsAllowedToRetrieveManagedPassword TEST-gMSA -Ker
    berosEncryptionType RC4, AES128, AES256
    New-ADServiceAccount : Identity info provided in the extended attribute: 'PrincipalsAllowedToRetrieveManagedPassword'
    could not be resolved. Reason: 'Cannot find an object with identity: 'TEST-gMSA' under: 'DC=voo,DC=domain,DC=com'.'.
    At line:1 char:1
    + New-ADServiceAccount TEST-gMSA -DNSHostName test-gmsa -PrincipalsAllowedToRetrie ...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo : InvalidData: (CN=TEST-gMSA,CN...DC=lovoo,DC=com:String) [New-ADServiceAccount], ADIdenti
    tyResolutionException
    + FullyQualifiedErrorId : ActiveDirectoryCmdlet:Microsoft.ActiveDirectory.Management.ADIdentityResolutionException
    ,Microsoft.ActiveDirectory.Management.Commands.NewADServiceAccount

  • Unable to install LabVIEW 2009, "Unknown Error"

    I'm installing LabView 2009 on Windows 7 on my Hp and when I run the setup after I unzip it, it come up with an error and says "Unknown Error". How do I get around it to install the program as soon as possible.

    This is a screenshot of the error...
    Attachments:
    Capture.PNG ‏1152 KB

  • Getting "Error 10 occurred" when building exe

    I am getting the following error when trying to build an executable: "Error 10 occurred at C:\Program Files\National Instruments\LabVIEW 7.1\vi.lib\Daq\lvdaq.dll"
    Listed under possible reasons were:
    LabVIEW: Duplicate path.
    NI-488: New I/O attempted with old I/O in progress.
    I made some changes and added a .vi to my program, but get no errors if I run the program from the top level .vi.
    Any ideas?

    Hi Rob,
    For some reason there's an issue with the link to the lvdaq.dll in your
    application. The lvdaq.dll is used by the DAQ VIs from the palette -
    are you by any reason calling the DLL directly from a Call Library
    Function Node?
    Can you please explain what changes you made to the VI that caused the
    issue. It would also be a help if you submit the VIs that you are
    trying to build into an executable, thanks.
    - Philip Courtois, Thinkbot Solutions

  • When installing Skype, I get error 2001

    Every time I try to installing Skype, I get the iTunes error 2001 (not very helpful at all)!
    The message push-up after I push the "Get App" button.
    /Tommy

    Pat,
    Thank you for responding. I'm experiencing the same runaround. I don't know which Illustrator link to click, and the one I did click wound up giving me the same error message. I think the problem is I need to download it to the Cloud or to Google Drive. I don't seem to have an option for where Illustrator can be downloaded. I read on the Chromebook website that there is no hard drive on a Chromebook, that everything needs to be downloaded and retrieved to/from the Cloud. I need CS6 Illustrator and also need Adobe Photoshop for my class.
    When I tried downloading I also noticed I was in an area for people who haven't paid. How do I download it as part of my subscription?
    If downloading to the Cloud is possible, how do I access and retrieve programs downloaded to it?
    Best,
    Stephanie

Maybe you are looking for