On iPhone 5S compass, level, parallax effect doesn't work properly.

I'm using iOS 7.0.2 on iPhone 5S. I recently opened compass app, calibrated it and the compass doesn't move. Restarted, reset, and even restored but doesn't work. But on iPhone 5 (7.0.2) it worked. Next I swiped to level feature it worked, but when I placed it on a straight table it showed "-6" reading, while iPhone 5 showed "0" ( latter is correct ). After that I checked the new dynamic ( bubbles ) wallpaper. When I move iPhone 5S they move but in between they start getting stuck, but on iPhone 5 they worked smoothly. I hope that it's a software issue/glitch and Apple will solve it soon.

I have the exact same issue - I have posted a question only this morning. I am reluctant to do a complete restore on my 5S but turning off on normally works and I can't keep doing that. I noticed though that it only stops working after I've made a call. It works intermittently though. 10 minutes ago it stopped working after I made a call. Just checked it now and it's working again?! My compass appears to be working (it also goes green when level but don't know if this i normal or not as I never use the compass anyway).
Wonder what could be causing it especially on the newer phones?

Similar Messages

  • I have an iphone 3GS and I have upgraded it to iOS 6. Since then it doesn't work properly. Every now and then it has been restarting by itself and requiring restore. When I connect it to itunes it restarts again and again. Is there any solution?

    I have an iphone 3GS and I have upgraded it to iOS 6. Since then it doesn't work properly.
    Every now and then it has been restarting by itself and requiring restore. When I connect it to itunes it restarts again and again without letting me take any action. Is there any solution?

    Hey, There are afew things you can try.
    - Simply turn your phone off and back on again
    - Hold down your home button and your lock button and let goes as soon as the screen goes black (Phone will power down) - Then turn on your phone and hey presto!
    - Back up your iPhone to your PC, then restore it..
    this ones last cause I think you may have tried it already..
    - Close all open applications
    Hope this helps!
       Kieran.

  • The middle button on my iphone 4 doesn't work properly what can I do about it?

    the middle button on my iphone 4 doesn't work properly what can I do about it?

    Make an appointment with the genius and bring to the Apple Store.

  • I have iPhone 5 and the touch screen doesn't work

    I have iphone 5 and the touch screen doesn't work,i want to restart it but my touch screen is not working. I read lots of reviews and support from online all in vain. Please help me fix the problem.
    <Re-Titled By Host>

    Do a reset, hold down the home/sleep button together until you see the apple logo and then release, then wait for the device to boot back up.
    No data is loss doing a reset.

  • HT4623 My iPhone 4S speaker suddently doesn't work properly from one week ago? How I can do? 4s is still under warranty?

    My iPhone 4S speaker suddently doesn't work properly from one week ago? How I can do? 4s is still under warranty?

    Have you tried any troubleshooting steps, like resetting you iPhone, for example?  Or restoring it?
    If not by all means do so because your problem could be caused by software glitches that could be solved resetting or restoring.
    Warranty is for one year from date of purchase and two years if you bought Apple Care at the time of purchase. If your iPhone has a hardware issue within warranty, it would be replaced by Apple.  If it is already out of warranty, you might be eligible for an out of warranty replacement where you pay a much lower amount but this varies according to the country and currency, so it is better to check with Apple or with an authorized reseller.
    You could check your warranty status here:
    https://selfsolve.apple.com/agreementWarrantyDynamic.do

  • I just upgraded the software on my iphone 4s and now the touchscreen doesn't work and i have the itunes logo an arrow and a plug on my screen

    I just upgraded the software on my iPhone 4s. Now the touchscreen doesn't work and on the screen is the itunes logo, an arrow and a plug. I have powered it off and on and nothing changes

    The iTunes icon and cable means that it's gone into recovery mode - you will need to connect the phone to your computer's iTunes and you should be able to use that to reset the phone, and you can then restore/resync your content to it

  • TS1398 What would be the reason why when i try to connect my iphone to a wifi server; it doesn't work? It also doesn't pick up any wifi connections.

    What would be the reason why when i try to connect my iphone to a wifi server; it doesn't work? It also doesn't pick up any wifi connections.

    go to settings>general> reset network connections  and then try again

  • Trouble with the PS CC2014 3D Effects - Intel HD Graphics 3000 that doesn't work properly?

    I Have a MBP 13 inch 2.8 GHz Intel Core i7 late 2011 and I'm Having trouble with the PS CC2014 3D Effects crashing when trying to apply a New 3D extrusion, are there any solution regarding the Intel HD Graphics 3000 that doesn't work properly?
    Thanks!

    Look at this document. It should help you troubleshoot and it suggests settings to try out.
    Photoshop CC and CC 2014 GPU FAQ
    While the stock advice for Windows users is to go to the Intel site for updates, Mac users can only get their drivers in the Mac OSX system updates. So you need to be sure your OS is up to date. If you have an earlier version, like 10.7 or 10.8, it is possible an upgrade to 10.9 might help.

  • My iPhone 5 speaker suddenly doesn't work properly!  The volume is so low I can't hear the phone ring.  I've restored and updated and done everything I can think of.  Please help!

    My iPhone 5 speaker suddenly doesn't work properly!  The volume is so low I can't hear the phone ring.  I've restored and updated and done everything I can think of.  Please help!

    Sorry, I think you got scam.
    Last thing you can try is restore as new:
    http://support.apple.com/kb/HT1414

  • Iphone 5 update to IOS7.0.2: on/off button doesn't work properly

    Since I updated my iphone5 to IOS 7.0.2 the on/off button doesn't work properly. When i try to restart it, it takes pictures from desktop and fails constantly

    Hey rcaudillo,
    Thanks for the question. I understand you are experiencing issues with your Sleep/Wake button. The following article outlines some troubleshooting steps:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Sleep/Wake button will not lock or unlock iPhone
    1. To lock the phone, press the Sleep/Wake button. Note: By default, if you don't touch the screen for a minute, iPhone locks automatically.
    2. To unlock iPhone, press the Home button or the Sleep/Wake button, then slide the slider.
    3. If either of the above steps don't work, try turning iPhone off and then on again.
    4. If the iPhone will not power off, reset it.
    5. Try to lock or unlock the phone.
    If you continue to have issues, we may need to isolate the issue further to determine if it is hardware related. The best way to do this would be to restore your iPhone as new:
    iTunes: Restoring iOS software
    http://support.apple.com/kb/HT1414
    Thanks,
    Matt M.

  • AirPlay does not work with iPhone 4 s or iPad.Remote doesn´t work as well

    AirPlay does not work with iPhone 4 s or iPad.Remote doesn´t work as well.
    WLAN is working, I can use Youtube on my AppleTV, but I can´t connect to my computer or use airplay on my iPhone or iPad.

    Something is not configured correctly that is creating issues with your AppleTV.  You can disconnect it from the TV and power, and then plug it into your computer with a micro-USB cable.  After launching iTunes on your computer, you will be able to restore it to default settings and upgrade the software.

  • The cable doesn't work properly when connected as data cable.

    Hi,
    I have recently encountered problem of the cable. The thing is that if i use it just for charging with the plug, it works fine. But when i wanna use it with computer (i.e., accessing itunes, etc) or with my car, it doesn't work properly, it keeps switching between charging and discharging very fast. I will appreciate your quick support!
    Regards,
    Farhan

    Just for all the people to know, I found out the solution. You have to mark the correct side of the charging cable which connects at inlet of the phone. Because this point acts as a chip when used as data cable or auxiliary use (car,etc). That's why it charges with the plug on any side. I don't know what's the frequency of it happening to iphone 5s users, because I bought it recently (iOS 7.1.1) Hope it helps to others in future.

  • Key Command for "Go to Next Marker" doesn't work properly

    Hi there!
    While using Logic Pro 9.1.8 with Mountain Lion (10.8.2), it seems that the Key Command for "Go to Next/Previous Marker" doesn't work properly.
    The only effect is, that a grey rectangle moves in the top of the Arrange Area while ignoring the Markers itself.
    Any suggestions to solve it or is it me that is misbehaving?
    Cheers, GJ

    Hi
    The commands work correctly here on the same OS etc: Cycle Locators jump to the next/prev marker and the Playhead jumps to the Start of the Marker.
    Default KC are Control Command +Arrow Left/right
    Step 1: check you are using the correct key command :-)
    CCT

  • Microsoft Outlook doesn't work properly since I updated to Mavericks?!

    Hello.. so yeah ever since I updated to Mavericks, Outlook from Microsoft Office 2011 doesn's work properly. It won't pop up with a window to either reply, forward or write a new e-mail and it gets annoying because I need it for work. So it's totally useless. I don't want to be deleting and installing MO again because my friend did it for me and I don't know all the registration details to prove it's legit or something and I don't want stuff deleted. Sooo.... can anyone help? I don't know how to get it to work, so frustrating!

    What Apple wants from his customers?
    1) I've paid my iPhone 4S 900 euros;
    2) I'm used to buy music and apps from iTunes store;
    3) my iCloud space costs 32 euros per year
    and, like me, millions of customers around the world!
    and Apple does not allow me (and many others) to use the internet traffic for which I (we) pay my (our) provider, that's not among those that directly sell iPhone??? Is this your idea of a really unblocked device as you falsely declsre from the pages of Apple online store ?!? Shame on you!
    If I had know that the 7.1 led to this I'd never updated my iPhone. No one (Apple and the sites that live because of her) told about this issue in their enthusiastic comments on the new, updated version, of iOS. Shame on you!
    This would claim a class action against such a behaviour!
    I'm disgusted
    thank you
    Giacomo - ITALY

  • Selecting with colour range doesn't work properly

    Well, at least to me it doesn't work properly.  If I have elements on seperate levels and I use the colour range option to select the area, it works on all the levels, not just the level I have selected.  That's not what I want!  I only want it to select the colour range on that one level.  The work around is to manually turn off other levels, but on a  file with lots of levels, that can be tedious.  Can this be avoided?  Incidentally, magic wand works only on the selected level, but not colour range (or color range, if you are American).

    Aha! You are correct. Layers above the target layer are still being sampled when sampling is at "Current Layer".
    That has to be a bug. The Eye Dropper Tool itself does work correctly, though.
    I'm about to report another problem, so I'll report this one, too.
    Edit: Looking again, I don't think there is a bug.
    It seems to not be that the higher layer is seen when sampling "Current Layer", which is correct and the same as when the Eye Dropper Tool itself is use. However, the pixels of the visible composite are then evaluated to determine the regions to be selected. I guess that's correct behaviour and you will have to do the Alt-click on eye trick to completely ignore all other layers.

Maybe you are looking for