On Ipod, music files are in Other. Cannot access via Music menu

Ipod Nano 4G
iTunes 8.1.1.10
I sync music files onto ipod from itune.
On itunes they show they got there.
I eject ipod.
And then unable to see songs under Music menu.
iTunes shows me that the Audio files are now Other files.
Using Windows Ic can see that on the ipod music files (F00) are stored in \ipod_control\music\ .
I have tried 5Rs several times and disk mode.
Problem also occurs with podcasts.
Is the unit faulty,

Similar Messages

I purchased lots of music yesterday from itunes and now i can't export to ipod because files are not found

I just purchased lots of music yesterday from itunes and amazon but now can't load onto ipod because files are not found.

elkelawdog wrote:
I think I had an old itunes id.
Either you did or did not. Do you not remember?
elkelawdog wrote:
But it never let me burn them to anything other than my Ipod.
Media is not burned to iDevices. Burning an iDevice would destroy it.
Why will iTunes not allow you to sync media to the iDevice? What happens when trying to sync media to an iDevice?
elkelawdog wrote:
I changed my password so now when I pull up my account there is no music.
Changed password to what?
Pull up what account?
What does this have to do with iTunes?
One does not pull up an account to access their media, they simply launch iTunes.
Changing a password has nothing to do with accessing the media on the computer when one launches iTunes.
What is the actual issue that is occurring?
elkelawdog wrote:
Can anyone tell me how to find my old account and then copy that music to my HTC One.?
iTunes has nothing to do with putting media on a non-Apple device.

"Volume not found" I have 3 iphoto_libraries stored in a external disk, while the actual files are in other external disk. Ive moved together iphotolibraries and files but: HOW CAN I TELL THE LIBRARIES WHERE TO FIND THEM NOW?

I have three iphoto_libraries stored in a external disk PASSPORT (one for each trip imovie Im making -Ive managed this way the libraries so to not confuse the trips) while the actual files are in OTHER external disk LACIE. And everything was fine: imovie find each library, could work with it, or iphoto could edit the files.
But one day everything crashed at the same time: i opened iphoto to find 3 different scenarios:
1) iphoto_library GREECE was there, but not the albums i prepared. no events. when double click in any of them: "Volume not found"
2) iphoto_library ITALY was there, and the albums i prepared too, but empty.
in both cases I can only see the photos in 'photos' because 'events' shows some events with photo preview and some with no preview, just some kind of preset clipart palm tree, but if i enter the event, photos are there but again: when double click in any item: "Volume not found"
3) iphoto_library ISRAEL was there, the albums too, when double click in any of them: all OK
The 3 libraries was managed the same way. Meaning: Ive imported photos to iphoto from external disk LACIE in a iphotolibrary stored in another external disk PASSPORT. Also: I don't have unchecked the option "copy to file" or something like that. photos where moved, not copied. Also i have all the movie_libraries in the PASSPORT as well. What happened??
Solution? Nothing yet. Ive moved now all the photo folders from LACIE together in PASSPORT with the iphotolibraries but problem persist:
HOW CAN I TELL THE LIBRARIES WHERE TO LOOK FOR THE VOLUMES NOW?
"Volumes" are the original files aren't them?
Please help. this is so annoying to try and find in the forum, to tricky to explain
I have a Macbook pro retina Yosemite 10.10.1 / iphoto 9.6 (910-29)/ iMovie 10.0.6
THANK YOU
Vicky

The 3 libraries was managed the same way. Meaning: Ive imported photos to iphoto from external disk LACIE in a iphotolibrary stored in another external disk PASSPORT.
This is not clear, especially when you say
I don't have unchecked the option "copy to file" or something like that. photos where moved, not copied.
Especially as the message you're getting is typical of a library where the ' option "copy to file" or something like that' is unchecked.
So it's a simple question:
Are you these Managed or Referenced Libraries?
A Managed Library, is the default setting, and iPhoto copies files into the iPhoto Library when Importing. The files are then stored in the Library package
A Referenced Library is when iPhoto is NOT copying the files into the iPhoto Library when importing because you made a change at iPhoto -> Preferences -> Advanced. (You unchecked the option to copy files into the Library on import) The files are then stored where ever you put them and not in the Library package. In this scenario you are responsible for the File Management.

Cisco 1262 AP cannot access via cosole and GUI

Hi,
I have a Cisco AIR-LAP1262N-E-9 but I cannot access via console and GUI. Also, I noticed that after getting IP address from DHCP server, its IP address will be released after 2minutes. Then after a while, the access point will get another new IP address. And this happens repeatedly.
Hoping for some help out there...
Thanks,
shawn

Hi Manas,
Thanks for your comments.
I have a WLC 5508 controller. I just want to have a basic setup for my upcoming project implementation. On my test bed, I have WLC, 2 sets of AP, and PoE L3 switch. The L3 switch serves as a DHCP server to APs. I manually set the Management Interface IP address of WLC in the same VLAN of the DHCP scope for AP just for basic connectivity. Upon powering up the APs, the WLC detected the APs. However, after 2-3 minutes, the WLC cannot detect anymore the APs. I also notice that the APs are getting their IP address to DHCP server but it will release after sometime..may about 3minutes. Then the APs will get again IP address and will release it. And this happens continuously. I just wish to hard code the IP settings to APs via console but I cannot access it.
Hoping for your help and thanks in advance.
Regards,
Shawn

I never set a password for my acrobat and it is locking my out of changing the password settings. I am trying to send a file and the reciever cannot access

help

There are quite a lot of possible things that are going on. Can you let us know
1. What system you have (e.g. Windows 7, Mac OS Mavericks)?
2. What version of Acrobat or Adobe Reader you have?
3. WHO gets the message about a password (you or the receiver, or both)?
4. What is the full text of the message, if you get it?
5. If the receiver gets it, what security do you set on the file?

Old files are unable to be searched via Search Functionality after upgrade

After upgrading TREX to version 7, older files prior to upgrade are now unable to be indexed. Only new files coming in are indexed properly.
Thanks in advance for the help!

Hi Lorcan, thanks for your response!
Anyway, checking Indexing Monitor, all statuses are in RED (Unknown Error: null). Although there are number of documents indexed properly, these files are the new files after the upgrade. The old ones are not indexed.
I have logged OSS already, but still no help.
Thanks!

WRT160n cannot access via web browser

After i unchecked the acces the router through web browser box and saved setttings now I cannot get back in. I know this was a dumb mistake. I did this so I counld access my web cam. Every time I tried to access the cam the router sign in screen came up. Well now the cam orks but not the sign in screen. Please help. I really don't want to push reset because I don;t remember the settings AT*T told me to change to use the router with their Modem.

Are you getting any error message...?
Are you trying to access the router's setup page...?
If you want to access the router setup page then,Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...If you setup your own password and you don't remember the password then,you have to reset the router.

How do i remove my old apple id from an old iphone...i cannot access via email nor security questions, pw does not work.

I got rid of my old iphone and opened new apple id and pw on this new ip4s. I cannot access the old apple ID via usual
access ie., security questions, password or email verification. The email never arrives and when I answer the security it states incorrect answer.
I just want to delete that old apple id account for security reasons, hackers, thieves, potential unknown risks.
Please advise.
Thanks.
C.

The Apple ID exists. The email address you used to create it may not, but the Apple ID does. Call AppleCare and ask to speak to someone in account security.

L7600 Cannot Access via browser

I'm frustrated.
HP Printer --> Wireless Bridge --> Router
I can print from my MAC and the HP Utility can access the printer so I know I have connectivity. However, driectly access the printer via the browser seems impossible. I know I have the correct IP address and netword otherwise I could not print nor would the HP Utility "see" the printer. Any ideas - my PC cannot "see" the printer either.
Thanks,
BGI

Router - Linksys E3100
Reserved DHCP for the pinter xxx.127
Access Point - WET650N - DHCP off using static IP
I can print from my Mac using the xxx.127 IP adresss and the HP Utility can connect to the pinter and print the configuration page. However, I cannot access the printer via the browser.

What type of files are in "Other" under "System Information Storage" on MacBook Pro?

Hi happy folks,
I need to clear up space on my MacBook Pro. When I open System Information and click on Storage, it says that 200G of my 250G are taken up by "Other." Not photos, not movies, not apps. I don't have that many documents. What constitutes this massive Other and how can I clear off some of this space?
Thanks!

This article explains what is contained in "other."
OS X: What is "other" space in About This Mac?
Barry

My Airport Extreme basestation used to work but upon returning from holdidays it no longer allows me to connect wirelessly through it to the internet on my iPhone, iPads, ipod touches and my apple tv2 cannot access the network either. Wired still works

When I returned from holidays I could not access the internet wirelessly through my Airport Extreme (5th gen) from my iPhone, iPod touches, ipads and my AppleTV 2 no longer can access the internet or the network either. I can get access to the internet on my iMac when wired directly into an ethernet port on the Airport Extreme. I have tried resetting my AirPort and created new networks but still doesn't want to co-operate. If I get wireless internet it is very, very slow and incosistent.
Any suggestions?
Rick

I see now that long questions are not going to be read and answered. Understandable. Since writing this I got help on one aspect of question and now have Airport Extreme visible through Airport Utility and it seems to work. However the wireless printer still does print. On the printer's screen, it recognizes my wireless network and connects. When I try to print from the MacBook, the usual printer icon comes up, but with Printer is Offline. Printer is Not Connected. So far, nothing in Apple or Brother help has given me answer to this problem. Any ideas would be appreciated.

I cannot access the PRIVACY menu from the Tools-Options menu to make changes to cookies and history. I can access every other menu on that page (General, Tabs, Content, Applications, Security, and Advanced. But Not PRIVACY. Please help.

I need to reset/change/clear my cookies, probably clear my cache, and change my history preferences. When I use the Tools-Options choice to bring up the appropriate menu (General, Tabs, Content, Applications, Privacy, Security,and Advanced) all allow me access to make changes (or not), the PRIVACY tab does not open up. It does no allow access to any info contained there in. It is like it doesn't exist or isn't even there. Also, in the Tools menu on the Firefox toolbar, both "Stop Private Browsing" and "Clear Recent History" are grayed out. What gives? Thank you for your help.

This can be caused by in incompatible/malfunctioning add-on. To test if this is the case follow the procedure in the [[troubleshooting extensions and themes]] article.

Similar problem to several others - cannot access iTunes U site

I believe I need to have my iTunes U site reset based on what I have read in over posts. Here is our site url with the debug code. https://deimos.apple.com/WebObjects/Core.woa/Browse/siue.edu/mkf437
Any help would be appreciated.
Thanks.
MacBookPro Mac OS X (10.4.7)
MacBookPro Mac OS X (10.4.7)

You can not access your site directly. You must go through and authorization/authentication process first. This is what the transfer script does.
Please see Chapter 2 at http://images.apple.com/support/itunesu/docs/iTunes_U_AdminChapter2.pdf
and the example transfer scripts at http://support.apple.com/itunes_u.
You may need to get assistance from you IT department to write and/or host this script.

Odd Startup behaviour and cannot access tools- options menu

As of this morning my installation of LV8 will not display the normal startup dialog box (allowing you to open existing VIs or open a new one), but simply opens a new VI immediately. If I close this new NI then again instead of returning to the start up dialog it opens a second new (blank) VI.    Furthermore I cannot open the Tools->option menu from within a VI front panel.
I've tried repairing the LV installation and when this didn't work I went for a full remove and reinstall - still no joy!
I've also check that this is not user specific, so that when I log in as a different user on the same PC I get the same behaviour
Help - please !!
Solved!
Go to Solution.

Hi AMHurrel,
This sounds rather strange.
Did you change anything on your setup?
When you say you did a full remove and reinstall, how?
These are the steps I would follow:
The following procedure will remove the National Instrument Software:
1.     Turn off the computer and physically remove or unplug all NI hardware that you have installed on your system.
    This includes anything that is PCI-, ISA-, USB-, 1394-, or ethernet-based.
2.     Turn the computer on and go through Add/Remove Programs (START » SETTINGS » CONTROL PANEL » Add/Remove Programs)
    and remove everything NI-related. Generally, if you can remember, it is best to uninstall things in
    the reverse order in which they were installed. For example, if you installed LabVIEW, then NI-DAQ, and then the
    Internet Developers Toolkit for LabVIEW, you should uninstall the Internet Developers Toolkit first,
    then NI-DAQ, and then LabVIEW last.
3.     After everything has been removed (do not be concerned at this point if an item still shows up in the
    Add/Remove Programs list after you have removed it), close all programs and restart your computer.
4.    Go to START button of your operating system, choose RUN and type "regedit". This will open the Registry
    Editor window. Go to the Registry Menu and choose Export Registry File. Select "All" for the export range,
    and select a file name. This creates a backup of the Registry in case a mistake is made when deleting the keys.
5.     Remove the following registry components from the Windows Registry:
    HKEY_CURRENT_USER\Software\National Instruments Delete the entire tree!
    HKEY_LOCAL_MACHINE\Software\National Instruments Delete the entire tree!
    HKEY_LOCAL_MACHINE\System\CurrentControlSet\Enum\PCI\ or \ISA and delete registry entries containing any
    keys with 1093 in them.
    Do not worry if any of these trees are not listed. Continue with the remainder of the process .
    Note: You may need to modify security policies. In Windows 2000/98/95/NT, go to [regedt32] then
    Security>>Permissions. In Windows XP you can modify security options using Edit>>Permissions in the
    Registry Editor (regedit).
6.     Close regedit.
7.     Make sure that you do not have any of your own VIs or other files saved in the "C:\VXIpnp",
    "C:\Program Files\National Instruments", or "C:\WINDOWS\nidaq" folders. If you do, copy them to a
    different location. If you are concerned about keeping old virtual channels and your SCXI setup intact,
    then backup the "C:\WINDOWS\niconfig.daq" file, too. Delete all folders and files mentioned above.
    Note: If you have Windows NT/2000, replace "C:\Windows" with "C:\WINNT" in the paths listed above.
8.     Save the attached file msiBlast.zip to your desktop.
    a) Extract the file msiBlast.exe from the zip archive.
    b) Double click on the downloaded msiBlast.exe file to run the executable.
c) Choose the Show NI Installers Only selection.
d) Using (Ctrl+Left Mouse Click) select all National Instruments Software that appears in MSIBlast.
e) Press the Uninstall button. This will uninstall all of the National Instruments MSI Registry entries.
f) Optional:
The Repair option will open the National instruments Installer Program and run the repair option within the installer.
Maintenance Mode will open the Installer Program and allow the user to modify the installation. To open the installer do not enter anything in the Command Line Arg? Dialog box.
9.     Reboot your computer.
10.     You should be ready to install your software. For the cleanest possible install, first install all of your
    application development software, such as LabVIEW, Measurement Studio, etc. Do a custom install, so that you can
    install just the application WITHOUT ANY DRIVERS. Reboot your PC when requested after each install.
    Even if the installer does not tell you to reboot, it would probably be a good idea to do so anyway.
    Now install your driver software and follow the associated user manuals. Some older non Plug-n-Play hardware
    must be installed before the driver. Download the latest versions of the drivers that support your hardware
    from our Drivers and Updates software library (link below), and install them one-by-one, rebooting after each
    install.
11.     Finally, shut down and re-install your hardware. When you boot back up, it should be detected in MAX.
NI Drivers Link : - http://www.ni.com/softlib.nsf
**Attached is msiBlast.
***Do you get an error messages?
Let me know what you think,
Kind Regards
Kind Regards
James Hillman
Applications Engineer 2008 to 2009 National Instruments UK & Ireland
Loughborough University UK - 2006 to 2011
Remember Kudos those who help!

Portal URL: Why cannot access via IP address?

When I try to access portal web with IP address, the tree navigation in browse area always shows blank or keep show "loading...".
But after I access the same URL but change it to domain name address, the tree navigation shows correctly.
Could you please explain what is the setting behind this?
Why in some environment we can access directly from IP address?
Thanks !

Hi Erika
you need to update your host file with your EP server host name and IP address
this host file is present in c:/windows/system32/drivers/etc/hosts
open this host file with notepad
and at the bottom give the values like this
<IP address of your EP Server> <EP Server Host Name>
Note:: you need to provide this settings under EP server host--c:/windows/system32/drivers/etc/hosts
Rgds
Srinivas

On Ipod, music files are in Other. Cannot access via Music menu

Similar Messages

Maybe you are looking for