On iTunes, how do you find the listing of free radio stations?

I found the podcasts but where are the radio stations?
Thanks in advance!    

In the menu, go to View | Show Sidebar --> this will bring back the old UI sidebar
Now click on Music in the sidebar all the way to the top (under Library)
and
Make sure Radio is checked in the Genreal tab of Preferneces
and
...then you should see Radio in the new Top Bar.

Similar Messages

  • HT204003 How do you find the passbook enabled apps once you use passbook???

    How do you find the list of passbook enabled apps once you start using passbook???

    http://www.macrumors.com/2012/09/19/passbook-enabled-apps-start-arriving-on-app- store/

  • How can we find the list of user exits for a transaction

    hi all
    iam new in user exits please send the basic details
    how can we find the list of user exit for a perticular transaction and how can we determine that a particulr user exit is used for a field
    regards
    jagadish

    hi,
    check the below links for userexits
    http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
    FAQ's
    http://http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.ficoexpertonline.com/downloads/User%20ExitsWPedit.doc
    http://www.easymarketplace.de/userexit.php
    http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
    1. what is the defference between enhancement and user-exits?
    http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm
    Re: difference between user exits & customer exits
    Some Questions ! Plz help...
    http://searchsap.techtarget.com/expert/KnowledgebaseAnswer/0,289625,sid21_gci1190924_tax299358,00.html?bucket=ETA
    2. Difference between CMOD and SMOD?
    http://www.sap-img.com/abap/what-is-the-difference-between-smod-and-cmod.htm
    http://www.sap-img.com/abap.htm
    http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/diff-between-cmod-and-smod-236095
    http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/diff-between-cmod-and-smod-236107
    check these links..
    http://www.sapgenie.com/abap/tips_and_tricks.htm
    http://www.sap-img.com/abap/field-exits-smod-cmod-questions-and-answers.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    passing selet-option variable to subrouine...
    Finding the user-exits of a SAP transaction code
    Finding the user-exits of a SAP transaction code
    Enter the transaction code in which you are looking for the user-exit
    and it will list you the list of user-exits in the transaction code.
    Also a drill down is possible which will help you to branch to SMOD.
    Written by : SAP Basis, ABAP Programming and Other IMG Stuff
                 http://www.sap-img.com/*
    report zuserexit no standard page heading.
    tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
             tables : tstct.
    data : jtab like tadir occurs 0 with header line.
    data : field1(30).
    data : v_devclass like tadir-devclass.
    parameters : p_tcode like tstc-tcode obligatory.
    select single * from tstc where tcode eq p_tcode.
    if sy-subrc eq 0.
       select single * from tadir where pgmid = 'R3TR'
                        and object = 'PROG'
                        and obj_name = tstc-pgmna.
       move : tadir-devclass to v_devclass.
          if sy-subrc ne 0.
             select single * from trdir where name = tstc-pgmna.
             if trdir-subc eq 'F'.
                select single * from tfdir where pname = tstc-pgmna.
                select single * from enlfdir where funcname =
                tfdir-funcname.
                select single * from tadir where pgmid = 'R3TR'
                                   and object = 'FUGR'
                                   and obj_name eq enlfdir-area.
                move : tadir-devclass to v_devclass.
              endif.
           endif.
           select * from tadir into table jtab
                         where pgmid = 'R3TR'
                           and object = 'SMOD'
                           and devclass = v_devclass.
            select single * from tstct where sprsl eq sy-langu and
                                             tcode eq p_tcode.
            format color col_positive intensified off.
            write:/(19) 'Transaction Code - ',
                 20(20) p_tcode,
                 45(50) tstct-ttext.
                        skip.
            if not jtab[] is initial.
               write:/(95) sy-uline.
               format color col_heading intensified on.
               write:/1 sy-vline,
                      2 'Exit Name',
                     21 sy-vline ,
                     22 'Description',
                     95 sy-vline.
               write:/(95) sy-uline.
               loop at jtab.
                  select single * from modsapt
                         where sprsl = sy-langu and
                                name = jtab-obj_name.
                       format color col_normal intensified off.
                       write:/1 sy-vline,
                              2 jtab-obj_name hotspot on,
                             21 sy-vline ,
                             22 modsapt-modtext,
                             95 sy-vline.
               endloop.
               write:/(95) sy-uline.
               describe table jtab.
               skip.
               format color col_total intensified on.
               write:/ 'No of Exits:' , sy-tfill.
            else.
               format color col_negative intensified on.
               write:/(95) 'No User Exit exists'.
            endif.
          else.
              format color col_negative intensified on.
              write:/(95) 'Transaction Code Does Not Exist'.
          endif.
    at line-selection.
       get cursor field field1.
       check field1(4) eq 'JTAB'.
       set parameter id 'MON' field sy-lisel+1(10).
       call transaction 'SMOD' and skip first   screen.
    *---End of Program
    if u want to find the function exit
    then check the below code
    REPORT ZV_FIND_EXIT NO STANDARD PAGE HEADING.
    TABLES : TSTC, TADIR, MODSAPT, MODACT, TRDIR, TFDIR, ENLFDIR.
    TABLES : TSTCT.
    DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
    DATA : FIELD1(30).
    DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
    PARAMETERS : P_TCODE LIKE TSTC-TCODE OBLIGATORY.
    SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
    IF SY-SUBRC EQ 0.
    SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
    AND OBJECT = 'PROG'
    AND OBJ_NAME = TSTC-PGMNA.
    MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
    IF SY-SUBRC NE 0.
    SELECT SINGLE * FROM TRDIR WHERE NAME = TSTC-PGMNA.
    IF TRDIR-SUBC EQ 'F'.
    SELECT SINGLE * FROM TFDIR WHERE PNAME = TSTC-PGMNA.
    SELECT SINGLE * FROM ENLFDIR WHERE FUNCNAME =
    TFDIR-FUNCNAME.
    SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
    AND OBJECT = 'FUGR'
    AND OBJ_NAME EQ ENLFDIR-AREA.
    MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
    ENDIF.
    ENDIF.
    SELECT * FROM TADIR INTO TABLE JTAB
    WHERE PGMID = 'R3TR'
    AND OBJECT = 'SMOD'
    AND DEVCLASS = V_DEVCLASS.
    SELECT SINGLE * FROM TSTCT WHERE SPRSL EQ SY-LANGU AND
    TCODE EQ P_TCODE.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) P_TCODE,
    45(50) TSTCT-TTEXT.
    SKIP.
    IF NOT JTAB[] IS INITIAL.
    WRITE:/(95) SY-ULINE.
    FORMAT COLOR COL_HEADING INTENSIFIED ON.
    WRITE:/1 SY-VLINE,
    2 'Exit Name',
    21 SY-VLINE ,
    22 'Description',
    95 SY-VLINE.
    WRITE:/(95) SY-ULINE.
    LOOP AT JTAB.
    SELECT SINGLE * FROM MODSAPT
    WHERE SPRSL = SY-LANGU AND
    NAME = JTAB-OBJ_NAME.
    FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
    WRITE:/1 SY-VLINE,
    2 JTAB-OBJ_NAME HOTSPOT ON,
    21 SY-VLINE ,
    22 MODSAPT-MODTEXT,
    95 SY-VLINE.
    ENDLOOP.
    WRITE:/(95) SY-ULINE.
    DESCRIBE TABLE JTAB.
    SKIP.
    FORMAT COLOR COL_TOTAL INTENSIFIED ON.
    WRITE:/ 'No of Exits:' , SY-TFILL.
    ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'No User Exit exists'.
    ENDIF.
    ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'Transaction Code Does Not Exist'.
    ENDIF.
    AT LINE-SELECTION.
    GET CURSOR FIELD FIELD1.
    CHECK FIELD1(4) EQ 'JTAB'.
    SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
    CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
    or
    1. in se11, goto table MODSAP
    View table contents
    2. in Type field, enter 'E' (for function exit)
    3. For that tcode, u should know the program name.
    eg. SAPLLMOB
    4. then type SAPLLMOB and execute
    or
    REPORT z34331_user_exit .
    TABLES : tstc, "SAP Transaction Codes
    tadir, "Directory of Repository Objects
    modsapt, "SAP Enhancements - Short Texts
    modact, "Modifications
    trdir, "System table TRDIR
    tfdir, "Function Module
    enlfdir, "Additional Attributes for Function Modules
    tstct. "Transaction Code Texts
    DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
    DATA : field1(30).
    DATA : v_devclass LIKE tadir-devclass.
    SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
    SELECTION-SCREEN SKIP.
    PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
    SELECTION-SCREEN SKIP.
    SELECTION-SCREEN END OF BLOCK a01.
    START-OF-SELECTION.
    Validate Transaction Code
    SELECT SINGLE * FROM tstc
    WHERE tcode EQ p_tcode.
    Find Repository Objects for transaction code
    IF sy-subrc EQ 0.
    SELECT SINGLE * FROM tadir
    WHERE pgmid = 'R3TR'
    AND object = 'PROG'
    AND obj_name = tstc-pgmna.
    MOVE : tadir-devclass TO v_devclass.
    IF sy-subrc NE 0.
    SELECT SINGLE * FROM trdir
    WHERE name = tstc-pgmna.
    IF trdir-subc EQ 'F'.
    SELECT SINGLE * FROM tfdir
    WHERE pname = tstc-pgmna.
    SELECT SINGLE * FROM enlfdir
    WHERE funcname = tfdir-funcname.
    SELECT SINGLE * FROM tadir
    WHERE pgmid = 'R3TR'
    AND object = 'FUGR'
    AND obj_name = enlfdir-area.
    MOVE : tadir-devclass TO v_devclass.
    ENDIF.
    ENDIF.
    Find SAP Modifactions
    SELECT * FROM tadir
    INTO TABLE jtab
    WHERE pgmid = 'R3TR'
    AND object = 'SMOD'
    AND devclass = v_devclass.
    SELECT SINGLE * FROM tstct
    WHERE sprsl EQ sy-langu
    AND tcode EQ p_tcode.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    SKIP.
    IF NOT jtab[] IS INITIAL.
    WRITE:/(95) sy-uline.
    FORMAT COLOR COL_HEADING INTENSIFIED ON.
    WRITE:/1 sy-vline,
    2 'Exit Name',
    21 sy-vline ,
    22 'Description',
    95 sy-vline.
    WRITE:/(95) sy-uline.
    LOOP AT jtab.
    SELECT SINGLE * FROM modsapt
    WHERE sprsl = sy-langu AND
    name = jtab-obj_name.
    FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
    WRITE:/1 sy-vline,
    2 jtab-obj_name HOTSPOT ON,
    21 sy-vline ,
    22 modsapt-modtext,
    95 sy-vline.
    ENDLOOP.
    WRITE:/(95) sy-uline.
    DESCRIBE TABLE jtab.
    SKIP.
    FORMAT COLOR COL_TOTAL INTENSIFIED ON.
    WRITE:/ 'No of Exits:' , sy-tfill.
    ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'No User Exit exists'.
    ENDIF.
    ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'Transaction Code Does Not Exist'.
    ENDIF.
    Take the user to SMOD for the Exit that was selected.
    AT LINE-SELECTION.
    GET CURSOR FIELD field1.
    CHECK field1(4) EQ 'JTAB'.
    SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
    CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
    Regards,
    Naveen

  • How do you find the phone's mac address for Droid RAZR Maxx HD?

    how do you find the phone's mac address for Droid RAZR Maxx HD?

    Ann154 wrote:
    WalrusM wrote:
    how do you find the phone's mac address for Droid RAZR Maxx HD?
    It is listed under the advanced options for the WiFi settings or About Phone > Status within the phone's settings
    Motorolas list them under About Phone > Status.
    Edit:  Oh, snap!  It is listed in both places.     Nevermind!  Please excuse! 

  • I've formatted my PC, how do you find the album you have bought in there on my account again?I've formatted my PC, how do you find the album you have bought in there on my account again?

    I've formatted my PC, how do you find the album you have bought in there on my account again?

    If you reformatted you disk, then you music was deleted.
    Apple only allows one download and advises that purchases are backed up.
    I guess you don't have a backup?
    If not you can recover purchased music from your iPod if you have one:
    http://discussions.apple.com/thread.jspa?messageID=11857427&#11857427
    If you can't do either, try contacting customer service and explain the situation, but they are not obliged to help you.
    http://www.apple.com/support/itunes/

  • How do you print the list of songs from a songlist in I-Tunes that you burn to a blank CD for the cover of a CD case?

    How do you print the list of songs from a songlist in I-Tunes that you burn to a blank CD for the cover of a CD case?

    Click the playlist in iTunes.  Then go to File > Print ...
    One of the options you will see to print is "CD Jewel Case Insert".  That's just what you want!

  • How do you find a list of computers authorized on your account?

    How do you find a list of computers authorized on your account?  Also if the computers are no longer available how can you de-authorize them?

    "How do you find a list of computers authorized on your account? "
    There is no list.
    "  Also if the computers are no longer available how can you de-authorize them?"
    You cannot, nor do you need to, until you reach the limit of 5.  At that point you can deauthorize all, then authorize the active computers.

  • 1.) How do you find the dictionary in Apple Mail Program?  2.) How do you add another dictionary?

    1.) How do you find the dictionary in Apple Mail Program?  2.) How do you add another dictionary?

    Hello James!
    I do not have any ABAP Instance, only the JAVA one.
    Therefore the ABAP transactions are quite useless.
    The problem tables are created by people working on the CAF layer.
    They have developed and deployed some homemade applications and this is leftovers from their development in some kind of way.
    Anyone with any ideas?
    Could it be that (yet) some special Portal Dictionary Role needs to be asigned to the Administrator?
    /Lasse

  • How do i find the list of apple staff picks/favorites?

    How do i find the list of apple staff picks/favorites?

    Hi All,
    I found it in my Support profile.  https://supportprofile.apple.com.
    Thanks.
    Richie

  • How do you find the difference in no. of days between 2 dates?

    How do you find the difference in no. of days between 2 dates ?

    There are 2 way to solve this: using java.util.GregorianCalendar or java.util.Date (like jesper1 suggested), depending what kind of solution You need:
            GregorianCalendar gc1 = new GregorianCalendar(2001, 01, 01, 23, 00, 00);
            GregorianCalendar gc2 = new GregorianCalendar(2001, 01, 03, 10, 00, 00);
            // 1st way using GregorianCalendar
            int diff1 = gc1.get(GregorianCalendar.DATE) - gc2.get(GregorianCalendar.DATE);
            System.out.println("Differnce: " + diff1);
            // 2nd way using Date
            int diff2 = (int)(gc1.getTime().getTime() - gc2.getTime().getTime()) / (24 * 60 * 60 * 1000);
            System.out.println("Differnce: " + diff2);Note: There are 2 days between the given dates, but exactly 1 day and 11 hours.
    The first solution returns "-2", the second returns "-1".
    (... and a 4th posting also won't help ...)

  • How would you find the pitch period of a sound signal?

    Hi
    I have a few questions and i would like if somebody could help me even with the smallest comment on this.
    How would someone be successfully estimate the pitch period (fundamental frequency) of a 5 second sound file?How would you successfully distinguish the voiced from the unvoiced parts and how would you make sure you dont mix voiced/unvoiced sections? Finally how can you find the exact points where the pitch is at its peak throughout the signal?
    Any help/comment/suggesion would be much appreciated

    Hello Madgreek,
    After some thought I think I may have come up with an algorithm for what we have discussed. Basically, you are interested in knowing the time intervals over which you can observe any given frequency in your signal. As you had suggested, you can examine small windows of your signal and perform FFTs on each of the small windows to determine what frequency content is contained in that window. By examining all of the windows, you will see when particular frequencies are prevalent in the original signal. You'd want to use the smallest allowable window to give you the most resolution, but one that is large enough to cover an entire period of the lowest frequency (so that you don't miss this frequency).
    I have attached an example program that performs this operation. The example performs this analysis on an array that represents audio data. I am basically performing multiple FFTs (for each window) and stacking these FFTs in time to form a 3D plot. By examining the 3D plot, I can then see when in time my frequencies of interest are at their peaks. Rather than graphing these plots, you may work out a different algorithm for programmatically determining and logging these peaks and times. I hope this is what you were looking for!
    Attachments:
    Time Variable FFT.vi ‏250 KB

  • How do you find the word count on MacBook, please?

    How do you find the word count on MacBook, please?

    If you are trying to find word count in a Microsoft Word 2011 documemt, for instance, open the document and go to the Tools menu, selecting Word Count. In Apple's Pages application, open the document and look at the bottom of the page, near the left it will say "X Words" where X is the number.
    Best of luck.

  • How do you find the iPad phone number for cellular data?

    How do you find the iPad phone number for cellular data?

    I know this post was a long time ago but people still seem to be viewing it.
    Quickest way:
    Via the iPad on 3G, go to http://m.telstra.com. The service number is then displayed and you are given the option to recharge.

  • HT5312 How can you find the link to get a rescue email?

    How can you find the link to get a rescue email?
    I am not a regular user - and wonder why????
    Been at this for hours, can't remember questions, support sends you to the questions you can't answer or I would have the first time, or a promise of a link which doesn't seem to exist!!
    Now locked out!

    You need to contact Apple, either through the link in that article or by phoning them and asking for the Account Security team.
    (80167)

  • How do you find the replies to the questions I asked?

    ''locking this as a duplicate - https://support.mozilla.com/en-US/questions/822449''
    How do you find the replies to the questions I asked?

    Click the '''My Contributions''' link after you log in. See screenshot.

Maybe you are looking for

  • Field and table needed

    please give the table and fieldname for object description and object number

  • My HP officejet 4630 e-All-in-O​ne

    I just bought my printer today and I took everything off, plugged it in and turned it on. And it is in some chinese language. I didn't have the option of putting it in english, and now I dont know how to put it in english. and this is what it looks l

  • Problem with htmlDataSet

    I have a web page and I want to replace dynamically the content of a div using htmlDataSet. The div is a sub section in my page and can contains arbitrary non structure xhtml code. My dataset is declare as this: var dsContent = new Spry.Data.HTMLData

  • Message Mapping (Substring)

    Hi All, I am using a standard substring in my message mapping to get the first 4 characters of the incoming text. This work fine except when the incoming text is less than 4. I get an error. Is there a way that i can accomplish the above despite the

  • Does BPM's required for these scenarios

    Hi everyone,       Would anyone send me the steps for File-RFC-File and Http-RFC-FIle scenarios. I created an Remote enabled function module with fileid and destination as import parameters and filecontent as export parameter.     My scenario is when