On Line Support Survey

I just participated in a three page survey regarding these fora.
Found it very elementary and not focused at all on the things discussed here. Almost like, "Are these boards any good"?
Was that a random survey or are you all seeing them at the top of the page?
Joe

Hi, Joe -
Many folk have received the survey request. It would appear to be random, but it is not clear what the trigger is - a few have received it more than once. One common event seems to be that it appears immediately after the person has posted a message.
It is indeed quite rudimentary; it seems to be directed primarily toward folk coming here for help, and includes very little applicable to those who stay here to help others.

Similar Messages

UK payroll - second line support

Hi Guys,
I am assigned Uk payroll second line support...
Am looking for some regular issues in UK payroll... can some body help me?
What are the other areas that I should focus on?
Regards
Sirisha

Check with your previous functional consultant, he should be able to tell regular issues related to your package. Generally once SAP is fully set up and running for some months you may not get problem from SAP config related issues. Mostly issues are with related to processes.
If you want us to give more suggestions on process related issues and may be you need to paste all process of your organization or tell us where you are working so may be if some one already have idea about that company could tell you more.
Hope above information is useful.
Manoj Shakya

I'm trying to email a photo from my iPhoto album, but I'm getting an error message that says "The email server didn't recognize your username/password combination." Any ideas? I can't find any help in Apple on-line support.

I'm trying to email a photo from one of my iPhoto albums, however I'm getting an error message that says "The email server didn’t recognize your username/password combination." Any ideas? I can't find any help in Apple on-line support.

Never mind. I was able to find the solution via an earlier post from West. Thank you!

I have photo 12--I understand i get 90 days on line support- I am away for weeks at a time. Can the 90 days begin after my first support chat ?

I have photo 12--I understand i get 90 days on line support- I am away for weeks at a time. Can the 90 days begin after my first support chat ?

It's 90 days from product activation.

Command Line Support Not Working in OSD

I am trying to deploy an image to a dell optiplex 760. I have added all of the storage and nic drivers from Dell's WINPE package, and then all of the drivers from the Intel site for the nic to my boot image. I then enabled command line support on the boot
image, after all of this I updated the boot image on my DP. When the SCCM splash screen comes up it says loading network, and then all dialog boxes disappears and the machine reboots. During this time when i press F8 nothing happens. I get no command
prompt window, and it doesnt pause the reboot. Any Ideas?

Sorry for my ignorance, when you say you installed every driver in there are you referring to adding them to the driver database or to your bootwim. Also if you cant grab the logs you might be able to get a report based on an unknown system, look in reporting
under "History of a task sequence deployment on a computer" if there was anything recorded before it bombed out you might be able to get some info.
Im still leaning towards a network driver though, can you snap an image of the drivers you have loaded into your preferred bootwim.

Command line support

Adobe, Has CreatePDF a command line support in order to convert multiple pdf files from a specific folder?
thanks!

Sorry for my ignorance, when you say you installed every driver in there are you referring to adding them to the driver database or to your bootwim. Also if you cant grab the logs you might be able to get a report based on an unknown system, look in reporting
under "History of a task sequence deployment on a computer" if there was anything recorded before it bombed out you might be able to get some info.
Im still leaning towards a network driver though, can you snap an image of the drivers you have loaded into your preferred bootwim.

Multi line support UCCX

Normal an agent only has  DN on line 1 which is their ACD line however there may be a need to have the following
Scenario A
Line 1 ACD
Line 2 Non ACD
Scenario B
Line 1 Non ACD
Line 2 ACD
How does UCCX react
If the agent is on an active Line 2 call with Scenario A , does UCCX still offer the call
If the agent was on a Line 1 call with Scenario B  does UCCX still offer the call
I saw that UCCX 9 or maybe higher now has multi line support in that UCCX knows the status of the device rather then the line so I guess in the above scenarios UCCX would offer the calls regardless if the agent is busy else why  due it the new feature ?
thanks

Thanks I saw the section for 8.0
Cisco Unified CCX provides multiple line support using the 6900/7900/8900/9900 series phones as agent devices. The Join Across Line (JAL) and Direct Transfer Across Line (DTAL) operations are supported on the 7900/8900/9900 series phones. Up to 4 lines are monitored by Cisco Unified CCX, these include 1 ACD line and 3 non-ACD lines but only the ACD line can be controlled from the agent desktop. The agent state depends only on the ACD line on the agent's device.
Do we need to configure anything - by assigning the device to the RM application will UCCX automatically monitor the other lines ?
Where does the JAL, DTAL come into play
Does the ACD always have to be line 1 ?
thanks

What speed can our Phone Line support?

We're thinking of going for up to 20mb broadband service, at the moment we're on 8.
Link Information
Uptime:1 day, 2:53:30
DSL Type:G.992.5 annex A
Maximum Bandwidth (Up/Down) [kbps/kbps]:975 / 3,188
Bandwidth (Up/Down) [kbps/kbps]:979 / 2,288
Data Transferred (Sent/Received) [kB/kB]:0.00 / 0.00
Output Power (Up/Down) [dBm]:12.0 / 19.0
Line Attenuation (Up/Down) [dB]:17.0 / 33.5
SN Margin (Up/Down) [dB]:13.0 / 13.0
Vendor ID (Local/Remote):TMMB / BDCM
Loss of Framing (Local/Remote):0 / 0
Loss of Signal (Local/Remote):0 / 0
Loss of Power (Local/Remote):0 / 0
Loss of Link (Remote):0
Error Seconds (Local/Remote):0 / 0
FEC Errors (Up/Down):4 / 426
CRC Errors (Up/Down):4 / 3
HEC Errors (Up/Down):76,838 / 1
That's our infomation from our o2 Wireless Box, though if we get up to 20mb we're thinking of switching to BT
Questions:
What will our estimated speed be? And, how much can our phone line support? Thanks

Hi, looking at your information and using this http://www.kitz.co.uk/adsl/max_speed_calc.php you should hope to get around 13Mb with an optimum line particularly if the Noise margin (SN Margin) was set to 6dB.
Yours is currently set at 13db which is why your connection is low, some isp's set this hign to maintain line stability.
DSL Type:G.992.5 annex A this tells me your on a 21CN connection that's adsl2+.
You could also use the BT site http://www.productsandservices.bt.com/consumerProducts/displayTopic.do?topicId=25633&s_intcid=con_in... and check your possible/maybe connection.

Re: Will my line support ADSL2/+ ?

Having just moved to BT from another ISP I am disappointed with the upload speed I am currently getting, it would appear that I have been provisioned on ADSL Max not ADSL2+.
See connection details below:-
Downstream 5.875 Mbps
Upstream 448 Kbps
The BT Wholesale Broadband Checker shows that ADSL2/+ is supported.
Is this the correct forum to get help on this as my previous ISP’s have provisioned using ADSL2+ with close to 1Mbps download speed?
Also is it OK to use this thread or should I have started a new one? Apologies if I should have.
Solved!
Go to Solution.

Thanks, sorry for the post in the wrong thread.
Telephone Number xxxxxxxxxxx on Exchange PONTYPRIDD is served by Cabinet 33
Featured ProductsDownstream Line Rate(Mbps)Upstream Line Rate(Mbps)Downstream Range(Mbps)Availability Date High Low High Low
FTTC Range A (Clean)
20.3
14.3
2.2
0.8
Available
FTTC Range B (Impacted)
17.7
8.7
1.8
0.6
Available
WBC ADSL 2+
Up to 3
2 to 4
Available
WBC ADSL 2+ Annex M
Up to 3
Up to 0.5
2 to 4
Available
ADSL Max
Up to 2.5
1.5 to 3.5
Available
WBC Fixed Rate
0.5
Available
Fixed Rate
0.5
Available
Other Offerings
FTTP on Demand
330
30
Available
Fibre Multicast
Available
Copper Multicast
Available

Will my line support ADSL2/+ ?

Hi all - after suffering with broadband drop-outs (and definitely ADSL - wired from router to PCs) I decided to do something about it. Short version: replaced microfilter, moved router, disconnecting ring-wire - and success! What was a patchy 3.5Mbps connection now reporting 4.906Mbps.
This is running on a HH3, which I think may have issues - after improvements everything fine for three days and then router seemed to give up: dropped connection completely, was ping-able but couldn't access its admin pages (all okay on reset).
My current stats are as below. FEC events may not look that greater (but massively better than before making changes). So:
- is my line likely to be able to support ADSL2+? (As I've had a slower connection for years will the availability checke get updated?)
- is it worth replacing the HH3?
- I understand the connection won't improve on its own but might if the router is reset - how long should I leave things before trying this to see if it improves. Attenuation suggests there's further scope for improvement - is this likely.
Thank you, and best wishes,
Andrew.
ps: yes, all something I should have done a while ago but was holding out for infinity after seeing local cabinets being postered with the "available here". Exchange is enabled; cabinet apparently won't be. (Do have line of sight on BT Adastral Park but wrong side of road...)
ADSL Line Status
Connection Information
Line state:Connectedppp0_0
Connection time:4 days, 20:25:25
Downstream:4.906 Mbps
Upstream:448 Kbps
ADSL Settings
VPI/VCI:0/38
TypePPoA
Modulation:G.992.1 Annex A
Latency type:Interleaved
Noise margin (Down/Up):9.3 dB / 24.0 dB
Line attenuation (Down/Up):36.7 dB / 22.0 dB
Output power (Down/Up):19.7 dBm / 12.1 dBm
FEC Events (Down/Up):203917 / 168
CRC Events (Down/Up):593 / 8
Loss of Framing (Local/Remote):0 / 0
Loss of Signal (Local/Remote):0 / 0
Loss of Power (Local/Remote):0 / 0
HEC Events (Down/Up):4133 / 6
Error Seconds (Local/Remote):412 / 20

Thanks - have tried that (before and after fiddling) - the jump from 3.5Mbps to 4.9Mbps started eight days ago so improvement is recent - is this site "live"? Having been stuck with 3.5Mbps for a couple of years will this immediately spot any line improvement (e.g. from disconnecting ring-wire)?
Results:
Telephone Number xxxxxx on Exchange KESGRAVE is served by Cabinet 20
Featured ProductsDownstream Line Rate(Mbps)Upstream Line Rate(Mbps)Downstream Range(Mbps)Availability Date
WBC ADSL 2+
Up to 4
3 to 7
Available
WBC ADSL 2+ Annex M
Up to 4
Up to 0.5
3 to 7
Available
ADSL Max
Up to 3.5
2.5 to 6.5
Available
WBC Fixed Rate
2
Available
Fixed Rate
2
Available
Other Offerings
Copper Multicast
Available

On line support service stinks

I spent hours trying to get the service back up. I paid at 1035 am it sis 6 pm. I spent several sessions on line having to reenetr the same inof. I have a conf number, I paid, etc. Only to get the re eneter the money comment. It is Verizons fault I paid you confirmed now get my service all back I have web but not phone and tv. I am thinking I may just dump the phone and TV over to cable again. Their TV menus are better and they have more movies. This last one just exited me after saying pay again. Well I jsut did. If I get double debited I am taking Verizon to small claims. I spent the better part oof theh day going in circles. I used the on line becasue phone is out....

pilot991,
Since we haven't heard back from you or have received a form submission as requested in your private support case, it appears assistance is no longer required. If you need any future help with your Verizon service, please make a post here on the forums so we can assist.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

Nokia PC Suite Command Line Support

Hi,
This one is for the techies, Could any one tell me if Nokia PC Suite supports commands via the command line?
I would like to make scripts to send texts through my cell phone while connected with the Computer..
Any help would be greatly appreciated.

Try AT command (CMGS+ etc) thru the com port. It's not part of PC Suite - it's part of GSM standard.
What's the law of the jungle?

Off Topic - Apple Support Survey

Has anyone else noticed this? Every so often I get "invited" to participate in a survey about Apple Support. I suppose it is happening multiple times because I refresh this discussions page so often
Maybe there ARE big changes coming to the discussions???...
Message was edited by: varkgirl to say, _ it, I unchecked the question box but it is still marked as a question...

Just this morning!
1GHz G4, 15" PB, 1.5GB RAM, Airport Network, 4 GB iPod Mini (1G), 60GB iPod (5G) Mac OS X (10.4.6)
Help others by marking solved questions as answered ( + Solved or Helpful )

SPA9000 Number of Lines Supported

Okay this is for another SPA9000, one that I can access through its web GUI unlike my previous post.
It has software version 6.1.5.
I understood that since version 5.2. 16 lines were supported by default, yet with mine only 4 are displayed.
How are the remianing 12 lines accessed for configuration then?

Hi,
The SPA9000 supports up to 16 IP telephone registrations.
I suspect that you are looking at the web-ui > Voice tab > Line N tabs
These lines are used to register the SPA9000 to ITSPs or gateways such as the SPA400.
This is described in the Configuring Line Interfaces on the SPA9000 starting page 58 of the SPA9000 Admin Guide located at https://www.myciscocommunity.com/docs/DOC-1750
Here's an excerpt for you:
You can configure the following types of services on the SPA9000 line interfaces:
ITSP service:
Up to 16 DID numbers can be supported on each line interface. You can configure different ITSP accounts on different line interfaces.
PSTN service:
You can configure a line interface to register the SPA9000 with a SPA400 to support PSTN lines.
SPA400 voice mail service:
You can configure a line interface to register the SPA9000 with a SPA400 to support voice mail server. This SPA400 should have no more than two PSTN lines connected. If more than two PSTN lines and voice mail are required, you should reserve one SPA400 exclusively for voice mail. Exceeding these guidelines will affect the quality of voice mail playback and command recognition.
ISDN services:
You can configure a line interface to register the SPA9000 with a Mediatrix® 4400 ISDN BRI Digital gateway.
Regards,
Patrick

Command-line support for encrypted images

Hi,
Is there any support in asr for performing restores using an encrypted image directly? I can't seem to find anything. It isn't much of a burden I guess to mount the image and then use it (now that I know that, anyway), but it seems like an oversight that asr can't just be given a password directly.
Similarly for hdiutil, it has some support for encrypted images, but some things seem to be missing. At the very least you can't convert an encrypted image into an unencrypted image because convert doesn't understand that.
Are these known issues? Are there plans to add this functionality? Or is it considered unnecessary since there's other ways around it?
tom

Sorry for my ignorance, when you say you installed every driver in there are you referring to adding them to the driver database or to your bootwim. Also if you cant grab the logs you might be able to get a report based on an unknown system, look in reporting
under "History of a task sequence deployment on a computer" if there was anything recorded before it bombed out you might be able to get some info.
Im still leaning towards a network driver though, can you snap an image of the drivers you have loaded into your preferred bootwim.

On Line Support Survey

Similar Messages

Maybe you are looking for