On multiple file encoding - won't let me crop

Hi everybody -
Just beginning the compression stage of my dance video
project(s).
When adding 70+ videos to the Flash Video Encoder - I am able
to make all the settings I want - except
being able to "Crop" 4 pixels from top, bottom and each side
(deinterlacing still showed top & bottom issues).
It's fields are not active, and won't let me to crop.
Is it something I'm doing wrong, or have I missed a step
along the way?
Thanks for helping if you can!
Kind regards,
Luke Wonderly

which version of the videoencoder are you using?
2.0.0.494 edition (Brand New)
Remember that you can't crop all files at once . .
Oh, didn't see that in the manual!
Where the heck is it listed?
I tried to save a profile with the compression setting -
including cropping - but upon trying to use that saved profile - a
dialog box comes up with:
Warning: some of the settings (crop, trim, cue point . . . .
Too bad, so sad!
2,000+ movies is gonna take a long time!
Their huge files - broadcast DVC-Pro - and the overscan - and
interlace top & bottom show up . . . . Aaarrrgggg!
Bye the way - is it 4 pixels cropped - top & bottom - to
clean it up ?
And shouldn't a few (maybe 2 pixels) on each side be cropped
as well?
Any other suggestions on how to automate what I need to do
(deinterlace, crop 4 pixels top & bottom & 2 pixels sides -
exported "High Quality / large)
Thanks for responding so far - sure helps clarify things!
Luke

Similar Messages

So whenever I try to download the newest itunes file it won't let me finish the install process because I'm missing the "Itunes.msi" file whatever that is and I've done some searches but I cannot find the file. Anyone know what to do?

So whenever I try to download the newest itunes file it won't let me finish the install process because I'm missing the "Itunes.msi" file whatever that is and I've done some searches but I cannot find the file. Anyone know what to do?

you can try this thread maybe? https://discussions.apple.com/message/16217061#16217061

Photoshop CC Acting Up - Won't let me crop - auto tone, etc...

For some reason my photoshop has started acting up. When I open any tiff files now it won't let me crop it until I unlock the layer. When I unlock the layer it will let me crop it once, but no further. After selecting all I used to be able to nudge in a direction and click crop to crop it... Also it won't let me do the Auto Tone or other commands if the layer is locked...
It used to be that all the photo's used to be imported without being locked and I used to be able to crop and auto tone and everything as I pleased. I don't know what's happened....

I don't know what to provide? It was working fine before... It didn't use to lock the layer when opening any file, and now it does, it used to let me crop normally, now it won't let me crop at all. Some of the settings got messed up while I was working on a project earlier yesterday. It was a project where I was taking out people from one scene and putting them in another. I played around with layers and other settings. Maybe I hit a wrong command or something but now it defaulted to locking all layers all the time and not letting me do levels or any other things until I unlock every single photo when opening and after that it STILL won't let me crop. When I select and crop it stays the same, doesn't crop the rest of the photo out.
Also when I open it up, it opens it in Layers now, it used to open it in the History tab. All of this is extremely annoying and it happens both in PS 2014 and CC 64 Bit
Is there a way to export a log to all changes I have made, or revert to the way it was before yesterday?
Don't know if it's relevant but I am using a Sony Vaio Z with 97% Adobe RGB on the LED screen, it has 8gb of ram, full quad core i7 t 2.10GHZ, Win 7 64 bit...I don't know how to extract photoshop setting or profiles to show you....

File uploader won't let me search other folders to upload pictures.

When I open the file uplaoder to put new pictures on my website, it is in the last folder that I used and won't let me back out of that to choose a new folder.

''guigs2 [[#answer-686897|said]]''
<blockquote>
Check to see if there is a drop down next to the assumed folder. If not, it is possible to erase the cookies stored from the site and try again.
[[Delete cookies to remove the information websites have stored on your computer]]
</blockquote>
I have done this, and it does work, but I have to do it EVERY SINGLE TIME I want to change what folder I'm uploading my pictures from. As a professional photographer I use multiple folders to separate my client's pictures. Deleting cookies every time takes up lots of time and signs me out of everything. I'd really hate to not use Firefox anymore. It's definitely my favorite.

File.encoding won't swap

trying to help someone who has a windows file server originally installed for russian locale. they managed to swap it back to what they require (en_GB) but the JVM file encoding's still stuck on cp1251. they say they've changed the JVM config's file encoding ("-Dfile.encoding=cp1252") yet the system still reports cp1251 for the file encoding (even after several reboots). i don't see anything in the bug parade & i'm at a loss as to why this box won't swap it's JVM file encoding.
any ideas?
thanks.

which version of the videoencoder are you using?
2.0.0.494 edition (Brand New)
Remember that you can't crop all files at once . .
Oh, didn't see that in the manual!
Where the heck is it listed?
I tried to save a profile with the compression setting -
including cropping - but upon trying to use that saved profile - a
dialog box comes up with:
Warning: some of the settings (crop, trim, cue point . . . .
Too bad, so sad!
2,000+ movies is gonna take a long time!
Their huge files - broadcast DVC-Pro - and the overscan - and
interlace top & bottom show up . . . . Aaarrrgggg!
Bye the way - is it 4 pixels cropped - top & bottom - to
clean it up ?
And shouldn't a few (maybe 2 pixels) on each side be cropped
as well?
Any other suggestions on how to automate what I need to do
(deinterlace, crop 4 pixels top & bottom & 2 pixels sides -
exported "High Quality / large)
Thanks for responding so far - sure helps clarify things!
Luke

HP Deskjet 1050 suddenly won't let me crop borders

Hello,
I've had this Deskjet 1050 for a long time and it has always worked flawlessly. Suddenly, it will not let me adjust the borders on photos. I am trying to crop and save a few photos from my high school yearbook. I've done this many times in the past with no problems whatsoever. Of course, with a yearbook, you can't ever close the cover all the way down, but it still always cropped yearbook photos in the past, so why suddenly no-go?
Instead of the usual straight line with arrows at both ends, when hovering over the border, I am getting a smaller "squareish" image that won't let me grab the border and drag it in. BUT, if I just put a single photo or a junk mail envelope in and scan it, I can crop it just fine. The only difference is, the cover is closed all the way.
If this quirk would be normal by design, I'd say fine, but why suddenly after all these years?
I would so appreciate any ideas from you helpful folks.
T'care,
Mike
This question was solved.
View Solution.

Hi palmetto, Thanks for providing the screen shots.
I had tried scanning on a Lab printer with a single document and one with the lid open and was able to crop the picture both ways. So I am not sure why your software isn't allowing the crop. It shouldn't make a difference whether you are scanning a single page or a booklet for the scanning software to allow you to crop the image. It might be software related. Try different settings in the software to see if it makes a difference.
When you scan the document, you are clicking the crop icon and hoovering over the little black squares right, to crop the picture?
Try changing the Scan Size then Scan Entire Document to see if it make to a different size es a difference.
You could always scan the photo, save it, then open it in Paint under All Programs, crop and save the image from there as a work around.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Card info on file, but won't let me purchase in app crystals for game.

So I have already purchased something from the market and cc is on file but when I play this game heros of chaos and try to by crystals it confirms password sakes me if I'm sure I click yes but purchase won't go through, any thoughts?

Apple is not reporting any problems:
http://www.apple.com/support/systemstatus/
Can't connect to the iTunes Store
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors | iPad Insight

Why is CS6 converting my files to DICOM files? Won't let me save as jpeg. Where do I change this?

Raw files open into ACR without a hitch, but when saving from PS, each file is 'saved as' a .dcm file - even when I choose jpeg in the format area. Anyone know where to change this default? thanks!!!

It's ALWAYS happened in prior releases that you cannot mix plug-ins from one version of Photoshop with another without unpleasant consequences. You need to get your story straight.
All you need to do is isolate the third-party plug-ins you want to use into their OWN separate folder, THEN you can use the Extra Plug-ins Folder settings to make each version of Photoshop aware of them.
And take heart - you'll notice that Photoshop CS6 has moved all ITS plug-ins out of the plug-ins folder to some other place. When you upgrade to Photoshop CS7, if you haven't heeded my advice you won't have this problem anyway.
-Noel

How do I convert an InDesign file into a PDF file, it won't let me do it when I 'Save As'. Help??

I need help with converting an InDesign file into a PDF file.
I've tried looking into the program and seeing if i can do it, but it is not giving me the option.
I need to be able to do this for work purposes.
Please help.

Try Exporting. There are also number of useful Export PDF presets that come with design.
What do you want to do with the PDF?

Corrupt file error won't let me manage nano

I followed the 5 R's from the Apple website, but iTunes will not allow me to run the ipod updater and refuses even to show the ipod in its listing. It says "corrupt file /ipod-control/itunes run chkdsk". I actually ran a chkdsk from dos and that errors out saying the ipod_control/itunes is inaccessible. Is there an Apple program to just reformat the ipod withou having to "read" it, as the iTunes seems to? I did put on the latest iTunes (7.2).
dell Windows XP Pro

You could try a format of the iPod in Windows. A full format does a check and remap of bad sectors on the iPod hard drive, and you would need to restore the iPod as normal (using the iPod updater) afterward. This can also work when the iPod is recognized by the computer, but not by the updater.
First, put the iPod into forced disk mode.
See: How to put the iPod into disk mode.
On your PC, go "my computer" and right click on the iPod, then choose "format". Ensure the settings are at "default" and that "quick format" is not checked. Now select "format". It will take a while, but when that's finished, restore the iPod using the updater.
Also, see if either of these help.
What to do if iTunes displays a corrupt file message.
Da Gopha's corrupt file info.

Something is wrong with the cropping. It won't let me crop the picture. Usually the arrow would appear so I can drag it to crop the image but now the little hand appear and does not change to the arrow.

I cannot use my crop function in editing. The little hand would not change to the arrow hence cannot drag to crop the image. It just happened today.

Lets start with details - what version of iPhoto and of the OS?
anything else that might help figure this out?
LN

Firefox for Mac preferences shows .qif file format for quicken as "quicktime image format"-wrong application and won't let me select anything else

Post to Firefox forum; Oct.2011
Re: Quicken 2007; Mac OS 10.5
Problem: can’t import or download Qif format files into quicken from bofa or Chase. Mac can’t recognize; how do I set preferences in Firefox (or Safari).
https://support.mozilla.com/en-US/questions/new?product=desktop&category=d1&search=Firefox+for+Mac+preferences+shows+.qif+file+format+for+quicken+as+%22quicktime+image+format%22-wrong+application+and+won%27t+let+me+select+anything+else&showform=1
Hello,
I previously used Firefox on my old Mac G4 with OS 10.3.9; the above issue existed with that system and Firefox 2.00.2 (or similar). I then "tried" to move to a G5 Mac with OS 10.5, hoping that an updated Mac Operating system and updating Firefox would solve that problem.
I'm now working on my son's MacBook Pro, OS 10.5.8, 2.4 ghz Intel Core 2 Duo; 2gb Memory; 2 gb 667 Mhz DDR2 SDRAM.
I still have a problem in Firefox Preferences trying to download .qif files. BofA Mortgage accounts only allow downloading of .qif files. My .qfx download works fine, but the error message is as follows:
The error message is that this is a corrupted file or one that Preview doesn't recognize.
and it is still a problem when trying to download Quicken .qif format files for our B of A mortgage.
The preferences for Firefox under File Helpers won't let me name the extension I want; instead, it CONFUSES .qif (Quicken Interchange Format) with .qtif (Quicktime Image Format) for Mac.
Therefore, when I download .qif files and try to import them to Quicken, I get a message that this is a corrupted file:
thanks for any help.
Val in Seattle

Well, in the end, I just gave up and deleted the photos, in the hope that it was something to do with them. Took some more photos and they seem to have imported without any problems at all.
Given that the same irksome photos loaded on the wife's macbook without so much as a murmur, how weird is that?
Still- all's well that ends well. Thanks for the suggestions- much appreciated.
Matt

Is there a way to email multiple files from pages

I want to send multiple files from pages, cover letter and resume, but when I select both files, the share icon goes dull and it can't be selected. Is there a work around for this?

Are you aware that someone without Pages cannot open the files? And that Pages will only run on OS X? Your best bet is do save the files as PDFs, then just drag the icons into your open email.
Walt

Files that won't delete

I have a multitude of files that will not delete for any reason whatsoever. When I try and open them the message "can't be opened because the original item can't be found" and the following options occur "Delete Allias", "Fix Allias", and "OK". I've tried to delete the allias as well as fix the allias but nothing seems to happen. The main reason I'm trying to delete these files is because they are taking up a lot of space. Any and all help would be fantastic as I have no idea how to go about this anymore>
Thanks.

These are just a few of the files that won't let me delete them.

How do I fix my ichat? My buddy list appears, but whenever I try to click on a buddy to chat, IChat won't let me. Nothing appears. When I try to click on "File" - "New Chat" Also nothing appears. What's wrong?

My buddy list appears, but whenever I try to click on a buddy to chat, IChat won't let me. Nothing appears. It won't let me chat regularly via text, or by video/audio chat. Even when I click on File -> New Chat, still nothing shows up! But, when I look at how many chats I have open, it says I have "X" amount of chats open! But nothing is there.........
If somebody tries to video chat me from my buddy list, I can see the request.... and then the video chat will work. But I cannot request anybody and if they send me a regular text ichat, ichat won't deliver it to me.
Somebody please help me I've tried so many things and nothing is working!!!!! :/

Hi,
This sounds like it is about Window positions.
iChat has Default places for Incoming Invites.
Video is always top Center of your Screen
Audio and Text chats are Upper right with the Audio slightly lower than Text Chats.
Secondary invites are sort of Stacked like when you open multiple files from the same App.
Your outgoing Windows are "Remembered" as to where the last one was when you used it.
This can be an issue if you use your Mac with a second display and turn Off Mirroring.
You windows can get "left" on the other screen.
Go to System Preferences > Displays and turn On Mirroring and the windows should come back to one Screen/display.
If this does not help go to your Home Folder/Library/Preferences and delete (Drag to Trash) com.apple.ichat.plist and restart iChat.
Unfortunately you will need to reset any iChat Preferences you have changed from defaults.
10:42 PM Tuesday; April 26, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.7)
, Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

On multiple file encoding - won't let me crop

Similar Messages

Maybe you are looking for