On my 2012 MBP I can no longer use dual screens/HDMI after upgrading to 10.8.2. I'm using Moshi Thunderbolt adapter

I think you are sailing in uncharted waters with those kind of modifications.
I am only guessing, but if you have not already done so, do a PRAM reset and then trash your FCP preferences.
Big Poppa Chris wrote:
I've also notice when I start the computer up, it stays on the grey screen longer than it did when I had the original card (512 mb).
My understanding is the Mac is doing a ram/hardware test during the grey screen, if the card you added had additional memory, then it is very likely the test will take longer - but I am no hardware expert.
MtD

Similar Messages

Can no longer sync Ipod to Itunes after upgrading to Itunes 7

I can no longer sync Ipod to Itunes since upgrading to Itunes 7. When I try it freezes my Itunes and I have to force quit the application. Anyone else know how to solve this? Anyone else having this problem?
Powerbook G4 Mac OS X (10.4.9)

I have the 3rd generation IPod and I thought it happened when I dropped it, but after thinking about it it did happen the same time I switched to itunes v7.
I have to stop the auto-sync and have the ipod completely restored each time. So when I want to update my ipod I have make it an hour adventure.

Can no longer connect to certain shares after upgrading to 10.8.4

After upgrading to the latest version of Mountain Lion, I can no longer access certain shared volumes. I have one machine running 10.4.11 and I can connect to its hard drive. Another machine on my network runs 10.5.8, and I can now only connect to the built-in hard drive. There are also 2 Firewire drives connected to that (10.5.8) machine that I can no longer connect to.
When I use "Connect to Server" and enter the AFP address of the 10.5.8 machine, I get a full list of "available" shares, but if I select one of the FireWire volumes, I just get a spinning "rosette" for several minutes and then a failure message. I also have an OS 9 machine that I can no longer connect to on the same network.
I already read the "Connecting to Legacy Systems" notice and still no joy after following the instructions.
Can anyone help?
Thanks!
Jon

No NAS other than an Apple one includes native support for AFP. They all use an open source package called Netatalk that is junk. Many years ago Apple deprecated the old security modules that Netatalk uses.
The easiest solution is to hack up Lion so that it will connect with the old security protocol. Do a search for "lion dhx2" or something like that. Another option is to update your NAS to a version of Netatalk that includes support for DHX2. That is easier said than done. Netatlk isn't as "open" as other open source packages.

Can no longer connect to wireless router after upgrading to iTunes 9.2

My wireless connection was fine (using MacBook). After upgrading iTunes, I can not longer connect to router/modem wirelessly - am tethered with an ethernet cable. Spent 1 1/2 hours on phone with AT&T support reseting the passwords, security, etc. A PC laptop accepts password and can connect. My iPhone still can connect. But my MacBook (OS X 10.6) will not recognize my password for the modem/router. Everything has been re-booted and reset to original settings. Also, I received an iPad yesterday and it won't accept the password for our home wireless network. The password is correct because I am using it on other devices that are connecting to the network. Any ideas?

Yes, but the issue is not with Lion directly; there seems to be something with the upgraded system, perhaps a legacy setting or pref... I've scoured the system to no avail. I'm actually about to reinstall 10.6 - wasted too much time on this issue.
Thanks for your help.
D

Can no longer connect to SMB server after upgrading to Lion

We have a MacBook Pro that was running 10.6.8. The user upgraded to Lion, and can no longer connect to a Windows 2008 file server. (We have two offices connected through a hardware tunnel, but i do not think this is the issue.)
We have tried to connect in the Finder (smb://[email protected]/). It asks for usr / pass, and then just hangs on "Connecting to server"
We can ping, have tested these credentials on other computers, and tried other credentials on this computer, to no avail. Furthermore, we installed a fresh copy of Lion on another computer, and successfully connected, so I don't think the issue is with Lion itself.
There must be something from the previous install that did not "upgrade" properly, but I don't know which file / setting it could be. It is system-wide setting, as we have also tried another user account on this same Mac.
We've also run Onyx to fix permissions, clean out all caches, etc.
Any idea what file i can change, modify, or delete?
Your thoughts would be much appreciated.
Thanks.

Yes, but the issue is not with Lion directly; there seems to be something with the upgraded system, perhaps a legacy setting or pref... I've scoured the system to no avail. I'm actually about to reinstall 10.6 - wasted too much time on this issue.
Thanks for your help.
D

I can no longer find the tones menu after upgrade to IOS6

Ever since my upgrade to iOS6.1 I can no longer see my ringtones in iTunes. I still have it and can see it in my computer files but there is no Tones menu in the library of iTunes. I've tried to just readd the folder but it did nothing. I have my phone set to manually add music and videos and so each time I try to check sync tones it tries to erase everything else and remove the manual option. And without the tones menu I can't find the ringtone to manually readd it to the phone.

I found my answer in another posting. There were two options. The first didn't help but the second did but both still good information.
Ringtones library is now called Tones. If you don't see Tones under the Library, go to iTunes menu EDIT>Preferences>check the Tones box under General tab, sources then click ok
iTunes>View>Show Sidebar...Tones should be listed here under Library.

Can no longer connect to network server after upgrading dsl modem

While I was working on a file that resides on a network server, the router was powered down so on reboot it would communicate with a dsl modem . After the router was power up I could not reconnect to the server.
I have internet access
The mini can see the server in the finder and the server sees the mini
This is not a wireing issue.
When I try to connect I get this message:
"The file server uses an incompatible version of the AFP Protocol. You cannot connect"
The server is an old mac running os 9.1. I've read that 9.1 is not compatible with 10.4.8. But it worked just fine this morning.
There are other macs (cubes) running 9.2 I can connect to them.
I've tried restarting and logging on as a differernt user. no change

Thanks for your help
I made no changes to the mini or the server.
The router was shut down then on restart the new (replaced modem) was configured by using another mac on the network (not the file server)
Once the router and modem were online again, other macs running 9.2 were accessing the file server as usual. The mini was not.
I had been working on a file that resides on the server. I was not warned that the router was going to be shut down. When I saved the file I got the beach ball then error message.
It'll be next week before I'm in the office agin. I'll report back then. Thanks

I can no longer render in FCP 6 after upgrading to an AMD Radeon HD 7970 3072 MB

Hey,
I purchased a AMD Radeon HD 7970 3072 MB that was modified to work on a Mac from MacVideoCards.com.
I'm editing with FCP 6 and I find that I'm unable to render files anymore.
I get the specific effect name followed by error.
Would this be related to the card and would you know how to fix this?
I've also notice when I start the computer up, it stays on the grey screen longer than it did when I had the original card (512 mb).
I had my 2.26 8 core converted to a 3.46 12 core.
I currently have 32 GB of ram 1333 MHz.
1tb Hard drive.
I'm also running OS X 10.9.5.
If you could be any assistance I'd appreciate it.
Thanks

I think you are sailing in uncharted waters with those kind of modifications.
I am only guessing, but if you have not already done so, do a PRAM reset and then trash your FCP preferences.
Big Poppa Chris wrote:
I've also notice when I start the computer up, it stays on the grey screen longer than it did when I had the original card (512 mb).
My understanding is the Mac is doing a ram/hardware test during the grey screen, if the card you added had additional memory, then it is very likely the test will take longer - but I am no hardware expert.
MtD

Help! My IE8 users can no longer access their wiki pages after upgrade to Lion.

I upgraded my SL server to Lion without checking the browser requirements for the new Wiki server. My users access the wiki via a Windows 2003 Terminal Server which is stuck on IE8, can't install IE9 on it. I push out the home page URL via group policy and now everyone is getting the "unsupported browser" message. Is there any way to allow them access with IE8? They don't actually update the wiki, that can be done with a compatible browser no problem but they need to be able to click on links. Do I just need to set up a separate website for them?

Anybody got this?
I've got 2 drives, and only the bottom one works after the 10.7 rollout? Doesn't appear that the other one is even recognized in the system profiler anymore.
Surely there's someone that knows wth is going on here...?

Can no longer open BOTH DVD drives after upgrade

OK...I have a Mac Pro, and pre Lion I had NO PROBLEM using F12 and opt-F12 to open both of my Superdrive trays. However, after Lion, F12 AND opt-F12 BOTH OPEN THE BOTTOM SUPERDRIVE ONLY, and I cannot access my upper superdrive.
Am I missing some sort of preference setting that needs to be changed? If so, I haven't been able to find it. If this is a known bug I have not been able to find any info on it.
Thanks in advance...

Anybody got this?
I've got 2 drives, and only the bottom one works after the 10.7 rollout? Doesn't appear that the other one is even recognized in the system profiler anymore.
Surely there's someone that knows wth is going on here...?

Can no longer see email message content after upgrading to ios 6

Since upgrading to iOS 6, my email loads (from three different email accounts), but when I click on an individual message the content of the message doesn't show, only the Subject line. If I click "reply" the content of the message appears. Anyone else having this issue?

Same issue here. Tried "Reset Network Settings", reboot, Airplane mode on/off, and turned off 3G.
also noticed when I dial someone from iPhone4 it defaults to speaker phone. I did check voice control and Shazam to make sure it wasnt the microphone malfunctioning and both those apps work fine.

Since I upgraded to os 5.1 for my iPhone I can no longer type in reminders. Any suggestions how to get around having to use siri for reminders?

since I upgraded to os 5.1 for my iPhone I can no longer type in reminders. Any suggestions how to get around having to use siri for reminders?

Unfortunately, I have a very similar problem. Since I upgraded to os 5.1 on my new iPhone 4S the reminders screen will not add new reminders or scroll up and down. What's more strange is the screen will still scroll side to side allowing access to the Completed list, and both the Completed list and Date functions work normally so this must be an upgrades glitch.

Why can't i activate my iphone 3gs after upgrading it to ios 6?

why can't i activate my iphone 3gs after upgrading it to ios 6?
It says,
''There is no sim card installed in the iphone you are attempting to activate''
Thanks for your help in advance!
Kayl07

There are several common causes for this problem:
Your security software (Antivirus, firewall, router settings) is blocking access to gs.apple.com, Apple's activation servers. Try temporarily disabling your security applications on your computer.
You have a redirect in your hosts file that defines a different IP address for gs.apple.com. you must delete all references to gs.apple.com from your hosts file (c:\windows\system32\drivers\etc\hosts, or /etc/hosts on a Mac)
Your phone is jailbroken or otherwise hacked.

Why can't I access my Gmail account after upgrading to YOSEMITE

Why can't I access my Gmail account after upgrading to Yosemite

Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
It is possible that the cookies.sqlite file that stores the cookies is corrupted if clearing cookies doesn't work.
Rename (or delete) cookies.sqlite (cookies.sqlite.old) and delete other present cookies files like cookies.sqlite-journal in the Firefox profile folder in case the file cookies.sqlite got corrupted.
*http://kb.mozillazine.org/Cookies
*https://support.mozilla.org/kb/Deleting+cookies

MacBook can't see my home wireless network after upgrade to OSX 10.8.5

After upgrading to OSX 10.8.5, my MacBook does not detect any wireless nertworks. My iPad and iPhone work fine, my router has been rebooted, WiFi is turned on, and the ethernet connection is how I am writing this message to you via broadband. There are a half dozen wireless networks in range (according to my iPhone) but the MacBook cannot find the router I am sitting next to. Any ideas on how to correct this issue?

It appears an SMC reset was required:
HT5815 I've just done the 10.8.5 update on my MacBook Pro end of 2008, and WiFi don't work after reboot... Impossible to activate it...
Here is your other post: MacBook can't see my home wireless network after upgrade to OSX 10.8.5
If you reply to it and marked it "solved", perhaps with a link to that post (copy and paste it, or just say you performed the SMC reset) it will help others find a solution. Thanks!

On my 2012 MBP I can no longer use dual screens/HDMI after upgrading to 10.8.2. I'm using Moshi Thunderbolt adapter

Similar Messages

Maybe you are looking for