On my Bluetooth settings I inadvertently forgot a device, how do I make that device discoverable again.

Turn the Bluetooth device in to discovery mode.

Similar Messages

I am trying to erase all content and settings but i forgot my password how do i retrieve it

I am trying to erase all content and settings but i forgot the password. What can i do. How can i retrieve the password

Place the iPod in recovery mode and then connect to your computer and restore to factory defaults/new iPod. For recovery mode:
iPhone and iPod touch: Unable to update or restore

In settings on my ipad the Bluetooth is constantly searching for devises. How do I make it quit searching.

In settings on my ipad the Bluetooth is constantly searching for devices. Why doesn't it stop or how do I stop it from searching and automatically connecting to devices?

If you do not set your device in discoverable mode, the iPad will never find them.

My Iphone 5 screen is cracked and I need to restore to factory settings and wipe all content. How do I do that?

My Iphone 5 has a screen that is cracked and cannot be read. I need to restore the factory settings to send it back to the warranty company. Please tell me how to do that through Itunes

Restore your iOS device
Connect your iOS device to your computer using the cable that came with it.
Select your iPhone, iPad, or iPod touch when it appears in iTunes. In the Summary pane, click the Restore button for your device.
Click Restore again to confirm that you want to restore your device to factory settings and delete all data and content. iTunes will download the iOS software file and restore your iOS device.
After your iOS device is restored to factory settings, it will restart, and you’ll see the "Slide to set up” welcome screen. Follow the steps in the iOS Setup Assistant. You can set up your device as new or using a previous backup. If your iOS device has cellular service, it will activate after you restore. your welcome

I forgot my Apple ID security question answers and cannot contact iTunes support by phone. The only way I can ask for help is via email. How can I make that happen?             Thanks

Hi! So I haven't used iTunes in a few months but I just got an iTunes gift card and want to make a purchase. iTunes redeemed it just fine but now that I want to make a purchase I am having problems. I can't remember my security question answers and iTunes is requesting them. I have two other verified emails but the are NOT rescue emails. I can't contact iTunes over the phone because my phone lines are out and are going to be out for a long time. The only way I can contact them is by email. How can I do this? Is there an easy way to just reset all my security questions? Please help a girl out. I just want my music!
Thanks so much

Alternatives to Reset Security Questions and Rescue Mail
     1. Apple ID- All about Apple ID security questions.
     2. Rescue email address and how to reset Apple ID security questions
     3. Start here to find your country, and how you can contact Apple:
         Apple ID- Contacting Apple for help with Apple ID account security.
     4. Fill out and submit this form. Select the topic, Account Security.
     5. Call Apple Support in your country and ask to speak to Account Security.
          Customer Service: Contacting Apple for support.
How to Manage your Apple ID: Manage My Apple ID

HT5312 I need to reset my security questions because I forgot them. How do I do that!

Every time I go to buy something from iTunes on my iPad 2, it asks for my security questions. I do t remember my security questions.! Help!

1. See my User Tip for some help: Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities.
2. Here are two different but direct methods:
    a. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
    b. Call Apple Support in your country: Customer Service: Contacting Apple for support
        and service.
3. For other queries about Apple ID see Frequently asked questions about Apple ID.
4. Rescue email address and how to reset Apple ID security questions

HT5312 I forgot my securty questions how do i fix that?

I forgot secutry questions how do i fix that? unable to buy apps without them..

Read the page that you posted from, that has instructions for how to reset them i.e. if you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then steps 1 to 5 half-way down that page should let you reset them.
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 page that you posted from to add a rescue email address for potential future use

MacBook won't wake up from sleep and Bluetooth Settings (Possible fix)

Hi,
I rest my SMC as per the instructions. I've done this a few times before and it my system sleeps one time correctly then glitches as previously noted. However, this time I did not use any Bluetooth device but I was connected to the internet via my wireless router. The computer has successfully entered 'sleep' and woke up several times without a glitch (white light flashing in front during sleep).
I the tried various Bluetooth settings starting with switching ALL the choices listed under the Bluetooth Advanced tab to off. I then switched on my Bluetooth mouse, used it for a while then I switched off the mouse (Microsoft Notebook Mouse 5000) and waited for the laptop to give the 'lost connection' notice. Once the notice disappeared I close the lid and the system entered sleep again (white light flashing in front) and woke without a hitch.
Next I restored the default Bluetooth Advanced tab settings including the ‘Allow Bluetooth device to wake system’, reconnected the Bluetooth mouse and used it for a while before closing the lid and placing the computer in sleep mode. I left the mouse on. Something very interesting happened…….the system properly entered sleep mode with the front white light flashing, I then intentionally moved the Bluetooth mouse and the system tried to wake with the lid closed. I saw the Apple logo light up briefly then shut off AND I also heard the Superdrive mechanism respond. The white light in the front of the system stopped flashing and just stayed on. The system would not wake. I had to hold the power button down till the white sleep indicator light shut off the boot the system back up. It is important to note that I DID NOT reset the SMC.
Once the system rebooted I made one change to the Bluetooth Advanced tab settings, Specifically, I switched off the ‘Allow Bluetooth device to wake system’. I used reconnected my Bluetooth mouse by turning it on. Used it for a while then closed the lid. The system entered sleep again (white light flashing in front) and woke without a hitch. The sleep mode works equally well now if I close the lid or select sleep from the menu.
I realize this may not help everyone but it has aleviated this problem, at least for the present on my system. I hope this helps some folks as well as the Apple techs.
Joe

Hi,
Just an update, it has now been one week since I modified my Bluetooth setting as per my post above. The computer is still going to sleep and waking without problems.
Joe

Hidden Bluetooth settings in 10.9 for serial

The new OS 10.9 Maverick hides the Bluetooth settings, I am no longer able to add new serial ports for my Bluetooth devices in order to connect to them via the screen command (screen /dev/tty.Bluetooth...).
I'm interfacing my phone with my computer and need a serial port to communication, this needs to be set up in the Bluetooth settings. As of the new OS it has been dumbed-down so much that these settings do not exist anymore. Funny thing is when you search for "serial" in the system preferences window it will only highlight the Bluetooth settings:
Please give back these settings, I'm no longer able to work with my computer because of this.

I'm hoping the original poster has found some way to remedy this situation since this is an old topic. I do wonder how far you are all getting into the process, from what I can tell once you pair a device & connect to it you get new entries under /dev. One for a tty and one for a call up device (cu…). You may have others depending on the device capabilities.
ls /dev
/dev/cu.DeviceName-SerialPort
/dev/tty.DeviceName-SerialPort
Are they not the connections you are looking for? I'm not sure that you need to see the serial ports in the GUI to be able to use them via Terminal.
Please tell me what I'm missing.

Bluetooth settings for BT Arc Mouse lost on restart since upgrade

Upgraded OSX last night and on restart my Bluetooth BT Arc Touch mouse is not working.
I remove the mouse from the bluetooth settings and, resetting the mouse, it then finds the device and I pair the mouse again.
It works!
Then when I shutdown my MacBook Pro, next time I switch on the mouse does not work again. Its showing as "Not Connected" in the bluetooth settings.
Very, very frustrating.
Have downloaded latest Arc Touch mouse drivers but no fix.
Any ideas?

PS.
In menu bar, bluetooth icon states "Bluetooth: Not Available".
Bluetooth is switched on.
The mouse is blinking red and green which means "Device is discoverable (trying to connect to the transceiver)."

How do i u acsess my bluetooth settings thru my phone to change name etc. Also cant connect to any devices

How do i u acsess my bluetooth settings thru my phone to change name etc. Also cant connect to any devices

What devices are you trying to connect to, and are they in pairing mode? Is the phone in pairing mode? The iPhone only connects to audio devices and to computers for tethering. You cannot use BlueTooth on an iPhone for file transfers to other phones or computers.

TS3048 Keyboard won't link and screen is locked, I cant access Bluetooth settings

My keyboard won't link and screen is locked, I cant access Bluetooth settings. What do I do?

First make sure the batteries aren't dead and that the keyboard hasn't already been paired with another device. If it hasn't, the keyboard should pair automatically when you reboot. You may have to press and hold the power button on the right side of an Apple keyboard until the LED starts flashing.
Otherwise see these support articles:
Mac mini (Mid 2011 and later) and iMac (Late 2012): Bluetooth keyboard may not pair during Setup Assistant
Apple Wireless Keyboard: Difficulty during pairing process
If you have a third-party Bluetooth keyboard, you may need a wired keyboard to complete the pairing process. It's a good idea to keep a cheap wired keyboard and mouse or trackball as backups for a desktop Mac anyway, because Bluetooth isn't completely reliable.

Missing Bluetooth Settings - Serial Ports

The new OS 10.9 Maverick hides the Bluetooth settings, I am no longer able to add new serial ports for my Bluetooth devices in order to connect to them via the screen command (screen /dev/tty.Bluetooth...).
I'm interfacing my phone with my computer and need a serial port to communication, this needs to be set up in the Bluetooth settings. As of the new OS it has been dumbed-down so much that these settings do not exist anymore. Funny thing is when you search for "serial" in the system preferences window it will only highlight the Bluetooth settings:
Can we have them back??

Hi,
I am having the same problem, could you find a solution?
Do you know if there is way to do the same thing from terminal?
Since I am pretty new to this advanced configuration, do you think this software could be useful for our case:
http://freeware.the-meiers.org
Thank you
Raf

I accidentaly pressed on "forget this devise" in the bluetooth settings. Now my iPhone would not even list my headset. How can I reverse what just happened and connect my headset? Can anyone assit please?

I accidentaly pressed on "forget this devise" in the bluetooth settings. Now my iPhone would not even list my headset. How can I reverse what just happened and connect my headset? Can anyone assit please?

You need to put the headset into pairing mode. The phone should then see it even though you have done the forget this device.

Palm TX: Bluetooth settings lost after soft reset

Hi all,
all my bluetooth settings get lost, when I perform a soft reset. Does anyone have a hint which files are getting deleted or "updated" from the ROM so I can restore them from a backup? Or do you perhaps have a solution so that the settings won't get deleted?
Thank you very much in advance!
Cheers!

I too have a problem with resets while using the Palm Bluetooth Keyboard 3245WW but i think my resets are only limited within Wordsmith when pressing the Delete/Del key. Try seeing if your problem is related to one particular key... though admitedly i use a T3 not a TX and i have read about others on the TX experiencing random resets. I am just wondering if it is tied to the Delete key like my problem.
My fix for my problem was to stuff some paper under the Delete key so i wont accedentally press it while typing.

On my Bluetooth settings I inadvertently forgot a device, how do I make that device discoverable again.

Similar Messages

Maybe you are looking for