On my canon powershot A3300IS the lense is stuck in the extended position and will not close
I have a canon powershot A3300 IS the lense is stuck in the extended position and will not close. How can I fix this myself?
Forneypamela,
Please remove the battery from the camera for a few minutes. Then, put the battery back in the camera and power it on again. If the lens is still stuck in the extended position, the camera is going to need service. I apologize for any inconvenience this may cause.
To start your repair process, you'll need to complete a Repair Request on our website.
If the camera is more than a year old, you may participate in the Canon Loyalty Program instead. The Canon Loyalty Program option allows you to replace your current camera for a discounted fee, plus shipping. The unit offered through this program carries a 90 day warranty. The original non-functioning camera would then be returned to Canon USA for recycling using a prepaid shipping label that would be provided.
If you would like to take part in this option, please call our Sales Department at (800) OK CANON (800-652-2666) seven days a week, 8am to Midnight. Let them know you have been working with online support and the Canon Loyalty Program was offered. Be sure to have your serial number for your camera at the time of your call.
If this is a time sensitive-matter, additional support options are available at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
Similar Messages
-
I am trying to install iOS6.0.1 on my iphone4 and it is stuck on "preparing to install" How do I stop the instal?????
I'm not sure iCloud is the best community to post that question in, to be honest I have the feeling it's likely something best asked from any M$ discussion groups that there might be.
-
I have an iMac, and have a Verizon DSL account (3 email addresses). Recently, my Mac Mail keeps requesting the passwords on my accounts every few minutes, and will not allow me to send messages using Mac Mail (the message says that the outgoing server was rejected. I cannot edit the outgoing server, and the keychain will not save my passwords (the ports are valid). How can I change the outgoing server to send emails, and how can I avoid having Mail request my passwords every 2 minutes? Verizon, as usual, will not provide support to iMacs.
Is there an email saved in your drafts or outbox folder? I suspect that Mail is continually trying to send it, and each time Google is rejecting the email message.
You can open the message and then delete it from your Outbox folder. Then try removing all @gmail email addresses from it and seeing whether you can send to the other folks. I suspect that will work.
With email, if an SMTP server *can* verify email addresses, sometimes it will and it will refuse to send messages. If a message has to be relayed across servers, no verification is done, and you'll get a bounce if an email address is bad. -
My iPod Nano (fourth generation) is stuck on a black screen and will not charge. It's done this before and you can still see a faint outline of the green charging sign and the time/date. HELP
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I am trying to import my bookmarks from IE and have read the instructions, but the Import button under File is grayed out and will not let me import. Any ideas?
* Make sure that you not run Firefox in [[Private Browsing]] mode
* In Private Browsing mode some menu items are disabled (grayed) and features like visited links are disabled and not showing
* You are in Private Browsing mode if you see "Tools > Stop Private Browsing", possibly grayed
See [[Private Browsing]] -
What can I do to change the sound of a track in garageband? It is "stuck" on electric piano setting and will not change. I've tried restarting, restoring sound library, full key reset, and checked for updates.
Hi
In iMovie'11 (version 9.0.x)
on top menu row - Apple/iMovie/File/Edit/Cut (Can vary dep. on language - in Swedish Apple/iMovie/Arkiv/Redigera/Klipp . . . )
down Cut menu - Slow playback/Raspid Playback/Re-play in Slow Motion and onvards
Here one can select the Pre-Set speeds
Are you familiar with getting 'inspector' to run?
No - but I guess that Double Click on clip/sequense or ctrl-Click on it might open it.
Yours Bengt W -
Installed iTunes on a 1TB drive designated H:. Bought a 3TB drive designated G:. Downloaded iTunes update. On "Run" command, it will not let me change the destination drive, so it registers an error, and will not update. App freezes, windows says to upgrade it.
I went to Edit>Preferences>Advanced, G: is showing as the destination drive.
-
my ipad is locked out however when i try to type my passcode the individual letter gets a box around it and will not let me type my passcode in. how do i get rid of this.
Hello SeanySmith,
It may be necessary to place your device into recovery mode and restore it as new.
iOS: How to back up your data and set up your device as a new device
http://support.apple.com/kb/HT4137
Cheers,
Allen -
Hi all, Since I updated to Mavericks I am having trouble with Safari showing all the buttons/clickable options, but they are gray and will not work. Specifically, the Trash Can/Delete and the "Move to" folder button simply do not work. Any ideas?
Please post a screenshot that shows what you mean. Be careful not to include any private information.
Start a reply to this message. Click the camera icon in the toolbar of the editing window and select the image file to upload it. You can also include text in the reply. -
The wifi button has went into the off position and will not come back on. Any suggestions?
which button where?
-
Hi,
I backup my boss iphone to my pc, i copy the backup file to his PC, can he restore the backup to his iphone using his pc and will not reset his iphone. Thanks so muchPut the device in DFU mode and restore.
When he gets back to the computer that he normally syncs with, he can restore from his backup. Everything since that last backup will be lost.
Start apologizing now... keep it up for a few months to several years.
Then hopefully you will learn to leave other peoples stuff alone. -
I JUST PURCHASED A HP LASERJETPRO P1102W BUT THE PRINT DIALOG WINDOW IN CS6 IS DIMMED AND WILL NOT ALLOW COLOR SEPARATIONS TO BE PRINTED?
Save as a PDF and print the separations out of Acrobat.
-
My nano blinks the apple logo when plugged into a charger and will not respond to any reset commands, anyone have experiance with this problem?
By a reset, I assume you meaning pressing and holding both the Select (Center) and Menu buttons (or Volume Down and Sleep/Wake buttons on the 6G Nano) long enough for the Apple logo to appear?
What happens if you try to manually place the iPod into Disk Mode? If you can do that, I would recommend connecting the iPod to iTunes and restoring it.
Putting iPod into Disk Mode
B-rock -
The finder bounces and will not close or relaunch.
When I power up, the icons in the bar at the bottom appear and the Finder icon starts to bounce. (No other icons appear on screen, just the ones in the bar at the bottom) Theer is a message box on the screen asking if I want to relaunch the finder, but it is flashing on and off and will not let me select it. I can open any program on the icon bar at the bottom and everything works fine, but the Finder icon and message box continue to bounce and flash on and off. When I close all programs, I have no drop down menus at the top. I have to open a program to get a drop down menu to shut the computer off. If I select Force Quit it will allow me to quit the program I am in, but the Finder just keeps flashing on and off. Solution?
The Finder is crashing. Launch the Console application in either of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ If you’re running OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Step 1
Enter the name of the crashed application or process in the Filter text field. Post the messages from the time of the last crash, if any — the text, please, not a screenshot.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall or hang logs — they're very long and not helpful. -
When I try to update my apps it says sign in required and will not let me update them
I suspect you have apps that need updating that were purchased from more than one account
- Apps are locked to the account that purchased them.
- To update apps you have to sign into the account that purchased the apps. If you have apps that need updating purchased from more than one account you have to update them one at a time until the remaining apps were purchased from one account.
Maybe you are looking for
-
When I try to download Flash 11 to use with Mac OS 10.7.2, I get the DMG successfully. Then I double-click on the installer and it comes up with a link to the license. This link is (http://www.adobe.com/products/eulas/#flash_player). I then click on
-
Update order user status based on a custom check box value in web ui
Hi Experts, I have a requirement to Update the user status based on a custom check box value in web ui. This is needed at the followup for a SR, the component is BT116H_SRVO, Details View. I created a value node with 4 checkboxes, based on the check
-
Table field for PO releaser in R/3 (4.7 Enterprise)
Hi Gurus out there: Do you know if there is a table field for PO releaser in R/3 (4.7 Enterprise)? We use for e.g. the transaction ME29N to release a PO and I haven't been able to find a DB table where the PO releaser is stored. In DB table EKKO I ca
-
Tile layout button not showing.
Hello all, I am trying to set my home view (wcc_lam_home, leasinghome.do) to a tile layout, because our users just want to see a 1-column layout instead of a 2-column layout. In customizing I added this overview page to the table "Registration of Ove
-
Happy New Year 2013 to you all lucky Mac users ;-) I have a iPad2 since last year and bought these apps "Pages, Numbers, Keynote, Gargaeband" on it. Now i have a new MackBook Pro 17" quadcore i7 OS 10.7.5 and trying to sync my apps and use them on my