On my HP Touchsmart 310 PC how do I increase the inactivity time on the display?

On my HP Touchsmart 310 PC how do I increase the inactivity time on the display?   Windows 7, 64-bit

Hi,
Please try Control panel > Power options > Change when the computer sleeps
Hope this helps.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • How can i get the System Time from the other host

    I want to get the System Time from the other host in the LAN,How can I get the Time using Java.
    Such as I am in WIN 2000 and I have a Unix host in LAN, I want to get unix host System time, How can I do it.

    Open a socket to port 13 and read a string with the time.
    -or-
    Open a socket to port 27 and read 4 bytes that are a network order timestamp
    Assuming that your UNIX machine has those services running, most do

  • I need to know how to edit a drawing - basically remove the arrows and text but at the same time match the background of the existing pic. then re add new text. how do i erase the arrows and text and arrows but match current background of pic. step by ste

    i need to know how to edit a drawing - basically remove the arrows and text but at the same time match the background of the existing pic. then re add new text. how do i erase the arrows and text and arrows but match current background of pic. step by step explanation please beginner

    Please post (a relevant section of) it right on this Forum.

  • How to set the interval time in the   JFormattedTextField? Pls Contribute..

    Hi Frienz,
    Hi have a following code in which i want set the interval time for the TextField by 15 min
    So how it is possible please tell me out.
    DateFormatter frmtr = new DateFormatter();
                   SimpleDateFormat sdf = new SimpleDateFormat("HH:mm");
                   frmtr.setFormat(sdf);
                   frmtr.setAllowsInvalid(false);
                   DefaultFormatterFactory factory = new DefaultFormatterFactory(frmtr, frmtr, frmtr);
                   fmtToTime.setFormatterFactory(factory);

    AFAIK there is no easy (pure java) way: either you exec something (depending on your paltform) or use native code. Appropriate privileges will be necessary.

  • How to control the looping time of the for loop in 10 microseconds in labview?

    I need to create a +/- 9 volt square wave with period of 20us using a D/A card (Not NI card). I can write command to the card using outport provide by Labview. Right now, I can generate square wave with 4ms period which is limited by the resolution of the wait until next ms icon I used inside the for loop. Could anyone tell me how to control the execution time of the for loop to about 10 us? Your help would be much appreciated.

    I'm not sure if this will hep, but this answer seems to answer this question
    http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=50650000000800000029410000&UCATEGORY_0=_30_%24_12_&UCATEGORY_S=0&USEARCHCONTEXT_QUESTION_0=microsecond+resolution+1ms&USEARCHCONTEXT_QUESTION_S=0

  • How i can wacht video clips in my mac and the tv at the same time trough the apple tv

    how i can wacht video clips in my mac and the tv at the same time trough the apple tv

    Welcome to the Apple Community.
    Unfortunately you can't do that.

  • How to set the exposure time and the gain of a connected camera with IMAQ USB

    A camera was connected to my computer with USB port and we can acquire the image through IMAQ USB.  Now we have to set separately the exposure time and the gain with the camera's driver software provided by the manufacturer.  My question is: how to set directly the exposure time and the gain of this camera in Labview?

    Hi Frank
    Welcome to the forum. Have fun
    FranklinT wrote:
    My question is: how to set directly the exposure time and the gain of this camera in Labview?
    I think its not possible for USB Cameras. 
    Previous threads for your ref
    http://forums.ni.com/t5/Machine-Vision/How-to-control-property-nodes-for-USB-camera/td-p/970306
    http://forums.ni.com/t5/Machine-Vision/imaq-USB-property-page/td-p/926034
    Sasi.
    Certified LabVIEW Associate Developer
    If you can DREAM it, You can DO it - Walt Disney

  • How can I reduce the recording time of the webcam?

    How can I reduce the recording time of the webcam?
    thanks
    Alex

    Keep in mind that Logic also has a limit of 8550 quarter notes. So changing the time signature to 4/8 can get longer recording times. So make sure you change this setting along with the song end. See page 93 in the reference manual.
    MBP 1.83 & MDD 1G DP   Mac OS X (10.4.7)   Logic Pro 7.2.2, Motu 828MkII+828, Firebox LC&XT, Tranzport, Unitor8+(3x)AMT-8's

  • How i can change my face time for the green one??

    how i can change my face time to the green one??

    No way that I know of.  It appears that Apple change the color with the last update.  I tried resetting the iPod and it did not change to the old green.

  • When will I receive my I phone 6 case which i ordered along with the Iphone6 ?As per the website it says october . How long is the wait time for the Iphone 6 case?

    When will I receive my I phone 6 case which i ordered along with the I phone 6 ?As per the website it says October. How long is the wait time for the I phone 6 case?

    While we have no idea within this Community Forum how long you would have to wait for your iPhone 6 Case, I can tell you that there would not be a "general" answer of value.  Like any product that is available in different materials and colors, the inventory varies based on what you have specifically ordered.  For example, I visited an Apple Store on the day after the iPhone 6 became available and was interested in the "Midnight Blue" Leather"  Apple iPhone 6 Case.  The store had plenty of all the other colors, but that specific case and color had sold out that morning. 

  • HT1391 i downloaded a movie for the 1st time. The movie shows downloaded, but I can not find it?? How do I find a downloaded movie??

    I downloaded a movie for the 1st time. The movie shows "downloaded" in Itunes, but does not show up anywhere?? Where/how do I find the downloaded movie on my IPAD 2??

    Where is my movie I downloaded on my iPad from itunes

  • How could I measure the excution time of the VI

    hiii
    I need to measure the execution time or the elapsed time of the prog in LabVIEW , I know that this time is very small but I need to calculate how much it is?
    are there a suitable vi to do this in lib of LabVIEW or we must build it?

    There is an integrated tool, the VI profiler, Darren presents it here.
    You can also find usefull info if you go on the LabVIEW community and search for "VI profiler" or "performance", you'll find all sorts of articles, blogs that can help you : https://decibel.ni.com/content/search.jspa?peopleEnabled=true&userID=&containerType=&container=&spot...
    Hope this helps
    When my feet touch the ground each morning the devil thinks "bloody hell... He's up again!"

  • How do you import a .png file into the Final Cut Pro X and at the same time keep the file's original transparency settings?

    How do you import a .png file into the Final Cut Pro X and at the same time keep the file's original transparency settings?

    Go to the Info inspector for the still image and in settings select the alpha type.

  • How to pass the decremented time to the run logic

    hai....
    i has a scenario that the logic has to trigger for the time -1 to the time i has seted to it..
    how can i pass the decrememted time to the RUNLOGIC
    thanks,
    Rajesh

    Hi Rajesh,
    TMVL is not supported in BPC MS.
    Try using
    *RUNLOGIC
         *APPSET= {AppSet}                    //optional
         *APP = {App}                          //optional
         *LOGIC = {logicname}                    //required
         *DIMENSION TIME = PRIOR
    *ENDRUNLOGIC
    Thanks,
    John

  • How can I make the hour times in the left margin in iCalendar dark enough to read

    How can I make the hour times in the left margin in iCalendar dark enough to read? (Eye transplant too expensive; couldn't schedule anyway under the circumstances

    I can't read anything on the new ical. I'm a teacher of the visually impaired and know how to access voiceover and zoom but hey, i just want to be able to open the app and visually scan a month quickly and visually.
    Never had a problem with the original ical - how to get it back?

Maybe you are looking for

  • Captivate 4 : How to stream a video with smil file ?

    I am trying to stream a video hosted on Highwinds CDN. Highwinds provides a web link for every uploaded flv file and does not accept calling the video directly with an rtmp link. I have tried to insert flash video using these settings : Video Type :

  • Issue with Characters (tilde, accent and more)

    Hello all, Im triyng to do and export / import Export system: AIX 4.x, Oracle, 8.1.7 Import system RedHat 5, Oracle 10.0.2 After trying a lot with different character sets, setting and unsetting nls_lang in the target system i still having problems.

  • Simply doesn't work!

    just tried loading an CS5 saved fla. into Wallaby latest version 0.9d - multiple errors and no HTML file created at all, just an empty .css, .js and a folder with svg files. this is a year later after launch of this app. looks like the project is aba

  • Account has forgotten history after password recovery

    Hi all, I mistyped my password a couple of times on my iPhone today and had to go through iTunes to recover/reset it. Then I went to update my iPhone app "Saisuke" But I was told only existing purchasers could get the Update ! I have had my account f

  • How to create Hi Def DVD?

    I'm using a Mac ProBook. I recently went on vacation and have video from a hi DEF camcorder as well as a GoPro. The video looks great on the high DEF TV direct from the camcorder or GoPro. I download the video to the Mac Pro book and edit it on I Mov