On my iphone 4s i am unable to see the files in my folders on hotmail

when i go into hotmail on my phone it shows my folders but when i open them they are all empty. how can i get the emails from these folders from my computer onto my phone

Are you accessing the account with the Mail app?
If so and you want all server stored mailboxes available on your iPhone, you must create/access the account as an Exchange account. Instructions for doing so should be available via Microsoft's Hotmail website or try a Google search for it.

Similar Messages

Exchange Server CCR 2007 unable to see the File Share Witness resulting in mailbox failover ?

Hi people,
Here's my Exchange Server 2007 SP3 in the ideal and normal situation:
Mailbox Server (CCR – Stretched Cluster) Nodes
PRODEXMBX01-VM (Active Mailbox, Quorum) – 10.1.1.53
DREXMBX01-VM (Passive mailbox) – 192.168.1.88
Hub Transport and Client Access Server Nodes
PRODEXHTCAS02-VM – 10.1.1.54
PRODEXHTCAS03-VM (FSW holder) – 10.1.1.55
DREXHTCAS02-VM – 192.168.1.89
Saturday early morning, for some unknown reason the Active Mailbox Server (PRODEXMBX01-VM)
cannot access or see the FSW on the HT server PRODEXHTCAS03-VM, thus
the mailbox gets failover to the DR Mailbox server (DREXMBX01-VM).
Here’s the Events logged:
Log
Name:      System
Source:        Microsoft-Windows-FailoverClustering
Event ID:      1564
Task Category: File Share Witness Resource
Level:Critical
User:          SYSTEM
Computer:      PRODEXMBX01-VM.domain.com
Description:
File
share witness resource 'File Share Witness (\\PRODEXHTCAS03-VM \FSM_DIR_ExMbxCluster01)'
failed to arbitrate for the file share '\\ PRODEXHTCAS03-VM \FSM_DIR_ExMbxCluster01'.
Please ensure that file share '\\ PRODEXHTCAS03-VM \FSM_DIR_ExMbxCluster01'
exists and is accessible by the cluster.
Log Name: System
Source: Microsoft-Windows-FailoverClustering
Event ID:      1177
Task Category: None
Level:       Critical
User:     SYSTEM
Computer:PRODEXMBX01-VM.domain.com
Description:
The Cluster service is shutting down because quorum was lost.
This could be due to the loss of network connectivity between some or all nodes
in the cluster, or a failover of the witness disk.
Run
the Validate a Configuration wizard to check your network configuration. If the
condition persists, check for hardware or software errors related to the
network adapter. Also check for failures in any other network components to
which the node is connected such as hubs, switches, or bridges.
So I had to perform manual failover back from DR to production so that both Active mailbox and the Quorum
are held by the Production Mailbox server (PRODEXMBX01-VM).
On Sunday Morning, the Event ID Critical 1564 occurred again thus causing only the quorum only to failover
to the DR mailbox server (DREXMBX01-VM) but the Active mailbox role is still held by the Production Exchange server (PRODEXMBX01-VM).
So now the situation is like the following:
Mailbox Server (CCR – Stretched Cluster) Nodes
PRODEXMBX01-VM (Active Mailbox) – 10.1.1.53
DREXMBX01-VM (Passive mailbox, Quorum) – 192.168.1.88
Hub Transport and Client Access Server Nodes
PRODEXHTCAS02-VM – 10.1.1.54
PRODEXHTCAS03-VM (FSW holder) – 10.1.1.55
DREXHTCAS02-VM – 192.168.1.89
So what causing the mailbox servers unable to contact the File Share Witness?
/* Server Support Specialist */

Did you check the blog above?
The account used in the clustered machine should have access to
\\PRODEXHTCAS03-VM\FSM_DIR_ExMbxCluster01. Please check the permissions. Try giving full permission to admins as well (just to try)
MAS
I've followed this (http://technet.microsoft.com/en-us/library/bb124922(v=exchg.80).aspx) instruction and there is no mentioning other than the Cluster Service Account.
/* Server Support Specialist */

Got new iMac, I had completed the migration from PC to new Apple computer, but still unable to see the files on the iTunes

got new iMac, I had completed the migration from PC to new iMac, but still unable to see all the apps and music that were saved from the old PC to new iMac. Please help.

My guess is the 30-day trial period has expired but you didn't remove the trial before installing the full version. The files to delete are the iWork ’09 folder from the main HD > Applications; the iWork ’09 folder in HD > Library > Application Support & the individual iWork application plist files found in HD > Users > (your account) > Library > Preferences for each user.
Yvan Koenig has written an AppleScript that removes the files. You can find it on his iDisk in For_iWork > iWork '09 > uninstall iWork '09.zip.

Unable to see the file share content via UNC path

I have run a cmd command to modify the NTFS permissions on a few home directories.
That command has helped me to remove all from the ACL of shared folders; and add domain admins into it.
I am an admin on that Windows server. Now, whenever I try to access any home directory via UNC path; it doesn't displays the files and folders in it. But, if I go to the server and try to open the particular home directory from there...first it gives me
a prompt that I currently do not have access on folder and then gives me an option to click on continue and then I can access the files and folders within the directory.
I am also able to see the files and folders in the directory via UNC path after doing the above steps.
Can somebody help me understand what I did wrong here and how can this be resolved now?

Sorry, am added into local administratir group. But, NTFS permissions shows that I have only "read" and "change" permissions (I have checked this from effective permissions).
The ACL of folder shows only "Domain Admins" have full access and I am not a part of AD group "Domain Admins". I think this is the root cause of the issue.
I am running below mentioned command to give myself full access on the file shares without making any changes to the current ACL of all shared folders. However, it is not working and not even throwing any error message.
for /f %i in (u:\users.txt) do cacls \\hdfile01\users$\%i /C /G "AMadm":F
users.txt contains 'cn'. Another thing to notice here is that if I just keep one ID in .txt file and then run my command; it is working. But its not running for all users in loop.
Can somebody please help.

I am unable to see the airplay icon on my macbook air, iphone or iPad which would enable me to use my Bose speaker through airplay. I set this up in the UK but have taken my macbook and bose speaker travelling with through Thailand. Ive wifi in my room an

I am unable to see the airplay icon on my macbook air, iphone or iPad which would enable me to use my Bose speaker through airplay. I set this up in the UK but have taken my macbook and bose speaker travelling with through Thailand. Ive wifi in my room and am able to access the internet on my laptop, Ive also been able to through the Bose Soundlink air wifi set application connect the bose speaker to the Wifi too.
I am only able to play my itunes through my macbook speakers and cannot find the airplay button which should be next to the volume slide once turned down to less than 1/3 of the volume..

Thanks for your help. Since I'm uninterested in loading all my photos (the only option) into photostream, I won't be able to use the settings in ATV. I guess I'm just stuck with using iPhoto on my MB Air. Thanks again.
paul

I am unable to see the photos which i have taken with iPhone on the photostream option of ipad

I am unable to see the photos which i have taken with iphone on my ipad ( photostream features is not working). i have checked the settings of both devises and photostream of both is working.

Are you talking about older pictures you took before turning photo stream on? If so, they don't sync via photo stream. You have to sync them to a computer's itunes then sync to other device.

I loaded some pics from my SD card and then I loaded some from my iPhone. But I am unable to see the pics from my SDcard in iPhotos.

I loaded some pics from my SD card and then I loaded some from my iPhone. But I am unable to see the pics from my SDcard in iPhotos.

I think it is 7.1.1 - there was another update today which I've uploaded but it didn't make any difference. It's just the music libary on the 5 that's causing me problems.

The iphone .... cannot be synced.The file name was invalid or too long.

the iphone .... cannot be synced.The file name was invalid or too long.
wat can i do to sync my iphone

Hi there rohitnitin,
It looks like the article below addresses the error message you are describing.
iTunes: Unable to sync photos
http://support.apple.com/kb/TS3697
-Griff W.

Iphone not work i can only see the APPLE NOT WORK, iphone not work i can only see the APPLE NOT WORK

iphone not work i can only see the APPLE NOT WORK, iphone not work i can only see the APPLE NOT WORK

First, try to reset by holding the sleep and home button for about 10sec, until the Apple logo comes back again.
If this does not help, connect in recovery mode and restore, explained in this article: iOS: Unable to update or restore

HT4623 I am unable to see the software update link under settings.please help

I am unable to see the software update link under settings.please help

Unless you are already using iOS 5, you have to connect to your itunes (on your computer) by cable, and will not have the update option in your iPhone's settings.

Unable to see the logical path and file created in FILE tcode from AL11 and unable to upload the file to this path from front end

Hi Experts,
I have created the logical path and filename in FILE tcode.I am trying to upload the pdf file to application server by using this path.But
I am getting message like "Unable to open the file".Even I cannot find the this path in AL11 tcode.Kindly anyone advise how to upload pdf file using
custom path and file created from FILE tcode.
Thanks & Regards,
Anusha.

Hi Anusha,
Please give as below.
I forget to say you cannot open the PDF in AL11 and for that you need some configuration, i think it can be done using content server,not sure completely please wait for some more suggestions.
Regards,
Pavan

Unable to see the personalization link on any page

Hi,
I am unable to see the personalization link on any of my pages (not even on login page).
I am setting the profile option value to "Yes" for the profile option
FND: Personalization Region Link Enabled
Also I have bounced the Apache.
Please help me as I am stuck due to this.
Thanks,
Anoop

Did you enabled the profile option Personalize Self-Service Defn (FND_CUSTOM_OA_DEFINTION) .It must be set to Yes.
Abhay

Unable to see the values in detail block

Hello,
I have a master detail block, when I query the form, I am unable to see the values for a particular field(Column), all other columns appear properly in the details block, Upon checking the same table(s) in SQL ( by using the JOIN defined in the where clause of the relationship in Forms) , it shows the relevant records for all fields. So what could be wrong with the Form, please advise.
Thanks
FM

IQ wrote:
I have just checked the field its a non-database field which is being used as a LOV column to display a value derived from LOV. How do I make this populate at Query time, as obviously this works when the Form is in a insert mode but not for Query mode. How to make it work for Query ? As it for LOV column and non-database filed, ignore my first suggestion.
Does your non-database filed has associate any column ?
For example, you have SUPPLIER_ID (database column) and SUPPLIER_NAME (non-database column). SUPPLIER_NAME has LOV column. And when selecting supplier name from LOV value also assign at supplier_id.
Now to show supplier name when querying, you have to write POST-CHANGE trigger at supplier_id. like
SELECT ASSC_CODE INTO :MST_SUPPLIER.ACC_CODE
FROM ACC_SUB_SUB_CONTROL
WHERE ASSC_ID=:MST_SUPPLIER.SUPP_ASSC_ID;Hope this helps

Is there any way I can view / remove pictures from Camera Roll on the iPhone, on a Mac, without actually importing the files?

Is there any way I can view / remove pictures from Camera Roll on the iPhone, on a Mac, without actually importing the files? I just want to view / delete files without importing them.
For instance I have 1200 photos on my iPhone Camera Roll. Some of these are shots, that I've taken multiple times, some good, some bad. I just want to clean up my Camera Roll, but going through the pictures on the iPhone's small screen is tedious. I'd much rather look at the camera roll's photo's on my Mac, and then decide which files I'd like to keep, and which to delete.
I don't want to import the files, as when I import the files, and delete them from Camera Roll, now the Photo's are not on my phone, and the only way to get them back on my Phone is to Import them back in using iTunes, and then they go into the Picture Library and not the Camera Roll.
In the same way as I can view Pics from my digital camera's SD card on a Mac without having to actually copy them to my computer, is there any app out there that will let me view my iPhone pics without importing them.

gsharp01 wrote:
Is there any way I can view / remove pictures from Camera Roll on the iPhone, on a Mac, without actually importing the files? I just want to view / delete files without importing them.
The short answer is yes.
Connect your iPhone to your computer.
Open Image Capture application.
Click on the 4 little squares at bottom to view them as photos, not a list.
Select the photos them click the No Entry icon at bottom to delete.

Unable to see the csv option while scheduling the report

I'm using BO XI 3.1. While i'm trying to make a schedule of a report, i am unable to see the csv export option. Is there a way to enable in the csv option?
Build version : 12.1.0.882
Edited by: mhsrinivasan on Mar 10, 2011 2:36 AM Added the version details

Scheduling the reports in CSV formate is possible in BO XIr3.1.
I would suggest you to contact to your BO Admin to check weather you have proper rights or not, in CMC scheduling part.

On my iphone 4s i am unable to see the files in my folders on hotmail

Similar Messages

Maybe you are looking for