On my iphone4 i need to be able to use both TDS and Yahoo e-mail. TDS works only sporadically. For instance, today I was able to both send and receive, then an hour later could not send. got the message that the server was not recognized.
On my iphone4 I need to be able to receive and send both TDS and Yahoo e-mail accounts (I also need to access from my Macbook Pro and my HP desktop). I have NO problem with Yahoo, but with TDS, the e-mail seemed to work on my phone.... and then it didn't.) In adding the TDS account, I chose "other" ( TDS is somehow accessed on the back end through gmail). For the incoming server I used the Incoming Sever Name of pop.gmail.com and the Outgoing Mail Server as smtp.gmail.com. I have using SSL "on" and the server port is 995. Is this setup correct for TDS?
FYI: POP will by default, delete messages from the server after downloading them (This applies to most pop clients, computer or mobile). POP is old tech and is not recommended if IMAP or Exchange are available. The default when setting up a g-mail type account is IMAP. Full synchronization with the server. You may also be able to set it up as an Exchange account, allowing for push e-mail and sync of calendars and contacts as well. See the Gmail help pages for instructions.
Similar Messages
-
The only way I have been able to resolve this is to reboot the server. This is typically unacceptable since I have other users working on the same server.
See https://support.mozilla.org/kb/Could+not+initialize+the+browser+security+component
-
I can't launch WiFi after using Ethernet
Anyway to reset this?
I'm currently connected using EthernetThat's an Outlook issue. You'll probably get better responses posting on the Office for Mac forums.
-
I have installed ACDSee Pro3 and have problem to transfer photofiles from device: I got the message; The item could not be edited because you do not have sufficent access privileges or destination volume is no longer available." What can I do?
Ask the ACDSee Pro support personnel.
With iPhoto that message means the library is a referenced library (photo not copied when imported into iPhoto's structure) and the source file is not where it was when first added to the library. I don't know how ACDSee works. Does it have a referenced mode as opposed to copying photos into its structure?
OT -
I have I.O.S. 6.0.1 and i live in Georgia, Tbilisi. I have got the problem with maps. It does not get directions. Per exemple it was working in italy but in my cuntry it does not work. Could u explain me what can i do to make my maps work in Georgia?
Thank uClear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies" -
i had free adobe reader and i scanned a doc to send to a client and as of last night i could not send as an attachment thru my email. So I paid for the 89.99 year adobe pkg and it still wont let me email a scanned and saved doc. it says 'an unknown error occurred'?
What exactly means "could not"?
And what Adobe product/service did you pay for? -
I have been trying to back up my phone and got a message that it would take 8 hours. I let it go over night and when I looked at it in the morning I got a message my data couldn't be backed up. I though my phone had 8 GB. If I have too much data what items should I delete in order to have my data backed up? I have deleted most of my pictures so I didn't think I had that much data to back up. If any one has experienced this please advise. I think my battery is about to die and I want my data back up ASAP.
What computer do you have?
What operating system is it running?
Allan -
hi...m using a mac pro quad core.....its not booting up...i can only see the apple logo and a circle loading...could not get into the login screen...any suggestions please.....m in the middle of a project and now i have got this one
regards,
v.s.bharanWelcome to Apple Discussions!
Do you keep your data backed up?
If not, you should always do so*:
http://www.macmaps.com/backup.html
You never know when a hard drive or a directory might go bad. Having a bootable clone is a must.
That link also shows you some tools you can use to recover data.
If you aren't backed up, try buying those tools first, before attempting to repair the directory.
Directory issues can be fixed with these tools*:
http://www.macmaps.com/directoryfaq.html -
I got a new ipad mini and chose to set up as a copy of my iPad. Didn't sync the music on however as it is a smaller model, not enough room. Now trying to get some pictures and music on. Chose some pictures that were not in iPhoto, got a message that I could only sync with one library, chose cancel, and apply and it downloaded my pictures anyway. Now trying to sync some music but just get "The iPad “Linda’s iPad” is synced with another iTunes library. Do you want to erase this iPad and sync with this iTunes library?" So I hit cancel. Have tried several times, same thing. What can I try?
You should be able to accept this message, it will cause existing music, photos (not camera roll) and videos (also excluding those in camera roll) to be removed and replaced with those from this computer. All other user data on the iPad will be unaffected.
-
I downloaded 200 photos, an event folder was created, I could see all the photos and was in the process of editing them when I got a message that iPhoto unexpectedly quit. I cannot find the photos anywhere on my computer now. Is there anything to do?
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD -
I am using WIndows 8 RP. Firefox used to work fine till yesterday. Yesterday I got a message that Firefox is updating, and since then I could not start Firefox again.
As the window starts and crashes there is no way I can see any error message.
I uninstalled Firefox, downloaded, and reinstalled again.
But no use, the problem persists.'''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
''(If you're not using it, switch to the Default theme.)''
* You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Don't select anything right now, just use "'Start in Safe Mode"''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
'''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
Please follow the [[Troubleshooting extensions and themes]] article for that.
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.'' -
I have a Mac notebook and back up to time capsule. I Got a message that my statup disc is almost full and I need to delete files. Not sure which files it means and will i lose my files if they are saved on the time capsule.
Visit
The XLab FAQs and read the FAQ on freeing up space on the hard drive. Also see Freeing space on your Mac OS X startup disk.
About TM "Backup Drive is Full"
Alert TM only deletes older files if they have been deleted from the source and when TM needs space on the backup drive for a new incremental backup. Time Machine "thins" it's backups; hourly backups over 24 hours old, except the first of the day; those "daily" backups over 30 days old, except the first of the week. The weeklies are kept as long as there's room.
So, how long a backup file remains depends on how long it was on your Mac before being deleted, assuming you do at least one backup per day. If it was there for at least 24 hours, it will be kept for at least a month. If it was there for at least a week, it will be kept as long as there's room.
Note, that on a Time Capsule the sparsebundle grows in size as needed, but doesn't shrink. Thus, from the user's view of the TC it appears that no space has been freed, although there may be space in the sparsebundle.
Once TM has found it cannot free up enough space for a new backup it reports the disk is full. You can either erase the backup drive and start your backups anew or replace the drive with a larger drive. -
Tried to open a file I created in Numbers a while ago, which I modified on 11/4/13, and got a message that I needed a newer version of Numbers. When I went to the Mac App Store it shows that the new version is already installed and there doesn't seem to be a way to reinstall it. When I checked "About Numbers" on my MacBook it shows "Numbers '09 version 2.3". Any suggestions as to how I can get the new version installed?
Are you launching Pages from an icon in your Dock? Installing the update does not change the Dock icons & it does not remove the older versions. Go to your Applications folder & launch the new Pages from there.
-
I tried to update my computer itunes program and it failed several times. First of all I had a message that sdi choose "tools and then download manually." I did and then everything got even worse. I got a message that siad, "This application has failed to start...MSVCR80.dil...Reistalllation may fix th problem."
I finally just backed out of everything and then got a message that said, "Itunes was not installed correctly. Please reinstall...Error 7 (Windows error126).
I need a tech person to call me and help. I don't have a clue what to do. I'm a musicain and all of my using is on itunes on my computer...I want to cry...I can't open it...is ti gone!!!!
LoriGot the same problem. It seems it is happening all over the place with the i-tunes update.
-
my problem is my iphone 4s is connected to wi-fi with full signal(3 bars) strength but freezes when browsing and says
"Cannot Open Page"
"Safari could not open page because the server stopped responding"
I already reset the iphone to its factory settings and erase all contents but still the browsing speed freezes or not searching at all. Sometimes it will work and fast but then the problem uccors every now and then. Iv'e been using iphone 4 for two years and I still have it and works fine compared to this IPHONE 4S.Settings → scroll down to Safari → in Safari settings, I selected both Clear History and Clear Cookies and Data.
IF that does not work -
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Finally - if problem still present -
Go to Settings>General>Reset
Reset the network settings - you will need to add the password of your home WiFi in your phone once more
The device should turn itself off & back on then go into Settings>Wifi and join your network
Maybe you are looking for
-
Connecting to a Dell Display (NOTE: POINTS WILL BE GIVEN!)
Hi all- I have a couple of questions about connecting my Macbook Aluminum to a Dell monitor. I was considering [this one|http://accessories.us.dell.com/sna/products/Displays/productdetail.aspx?c=u s&l=en&s=dhs&cs=19&sku=320-8103]. So, I had several q
-
Can the mini support 16x9 ratio?
ok simple question this one: I want to use a mac mini as a home theater with my 16x9 plasma screen, all of my standard macs will produce a 16x10 aspect ratio without any problem, 1920x1200, 1440x900 etc, but with the mac mini do you get an option to
-
How do i get FMS to listen on port 80?
Hello, I'm working on an app that is used by a client of ours that is in state government. Because of their security settings, they only have port 80 open to use for connections to our application. We have a dedicated server running FMIS 3.0, and I'v
-
Trying to import videos from my sony handycam imovie connects but nothing happens
Trying to import videos from my sony handycam. imovie searches and then nothing. I was able to import yesterday. SPoke to Apple Tech he said I just need to wait it out, have been waiting 3 hours?????
-
AfterEffects CS4 Crash on Output Module Windows Media
After sitting on hold for 2:15:00 yesterday, I have yet to discover humans working support, so I turn to this forum.... I own CS4 Production Premium, on a HP Z800 with XP64, sp2 and 16gb, nvidia quadro fx 3700. Since installing it several months ago,