On my Mac, I am working with IMovie and trying to burn to a dvd and get error message 2135? Never got this before. What is it? Thanks
Using IMovie, I get error 2135 when trying to burn to a DVD. Actually, it is during the preparation stage. Never got this before Whats the problem? Thanks
Hi
You must tell more
• Error 2125 - I recognize - but -2135 is new to me
The other is in regard to Movie Length in TIME + MENU time - as this is the limiting factor in iDVD (not GBs or other just time)
a. How many movies
b. duration of each movie
c. Menu selected
d. Is MENU still and silent - or animating and with audio (Takes lot's of the movie time)
e. Encoding quality selected in iDVD
f. HOW did You go from iMovie to iDVD
g. What version of iMovie and iDVD are You using
h. FREE Space on Start-Up (Mac OS) Hard Disk - HOW MUCH
As You see there are lot's of info needed to be of any relevant help
iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1) and iDVD 6 has the two last ones
• Professional Quality
(movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
• Best Performances
(movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
(movies + menus up to 120 min.) - slightly lower quality than above
Menu can take 15 minutes or even more - I use a very simple one with no audio or animation like ”Brushed Metal” in old Themes.
About double on DL DVDs.
Yours Bengt W
Similar Messages
-
Need help-
On my mac with yosemite, when trying to install my own brushes, I get error message: "Could not load the brushes "blahblah.abr" because the file is not compatible with this version of PS" (PS CC 2014) ????Thank you station_two but I did install them in my
applications>adobe>presets>brushes and still I get this error message......
On Tue, Dec 2, 2014 at 6:20 PM, station_two <[email protected]> -
Hi all,
I am trying to install Xcode 3.2.5 & Xcode 4.2 in iMac (Mac OS X 10.6.8) , I am getting error message as "Installation Failed". somebody can help me. Thanks in advance.I too have the same error while installing xcode 4.2 in Mac os x 10.6.8.
Can any one solve this issue. -
My iPad works perfectly except when trying to update apps. Then I get a message that says "Cannot connect to the iTunes store."
Try logging out of your account on the iPad by tapping on your id in Settings > Store and then log back in and see if it then works.
If that doesn't solve it then what has worked for some people is going into Settings > General > Date & Time and change the date to a few months in the future and then re-trying -
When trying to connect from iTunes to Airplay speakers I get error message “The network connection timed out” although some sort of connection is made as the speaker is turned on. Same thing with Apple TV. Is the distance between my PC and the speaker or the AppleTV the problem?
Hi whitwick,
If you are having issues with your network connection when attempting to use AirPlay, you may want to use the steps in this article to troubleshoot -
iTunes: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS5209
Thanks for using Apple Support Communities.
Best,
Brett L -
Keep getting error message "FCE" can't install on this disk. A newer version of this software already exists on this disk. Have remove all FCE elements with no success.
http://www.digitalrebellion.com/fcsremover/
-
I have followed the instructions on the apple support pages and still cannot get my phone to work. It continues to show the iTunes USB picture and is not recognised on my iTunes on the windows PC. When I connect the phone to my iMac it shows no data and says I can restore to factory setting. However if I do this will all my data be erased? How do I get my phone and data back? I have saved most of the photos that were on the phone but all my contact details and messages are stored and I really need to get them back! Would have limited memory on the phone when trying to update caused this problem?
C Mawle wrote:
Thanks. I have followed all the instructions as recommended and nothing has worked so it looks like the restore/update may have been interrupted - would loss of internet connection do this?
Yes it would, possibly even brick it.
Have successfully connected my ipod nano with iTunes so looks like the device driver is working.
Can I use my ipod nano USB connector to check?
It is not much help to you, since the device that you need still not recognized.
Anyway looks like I may have to swallow the loss of data. Have set-up a call for tomorrow with Apple support so will wait until after this before doing the factory restore!
Good luck, but if you expect miracle from that call good luck again. -
this happened every 2 or 3 days for about 2 weeks , When I reinstall the program it works ok. I have a 2010 HP with windows 7 64 bit.
That means you need to clean reinstall.
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
More information about reinstalling Firefox can be found [https://support.mozilla.org/en-US/kb/troubleshoot-and-diagnose-firefox-problems?esab=a&s=troubleshooting&r=3&as=s#w_5-reinstall-firefox here].
Please report back to see if this helped you!
Thank you. -
Backup on CD/DVD wont work. crashes when it tries to burn 1. DVD
i tried it several times, but it wont work. if i start itunes tells me that it needs 4 DVDs to backup the whole library. so i put in the first one. the process collects informations and then writes the first DVD. then the burning process starts but windows shows up a messege that iTunes occured an error and had to be shut down. no more explantations.
now i reinstalled my windows xp and itunes so that i have a new clean system. i copied the library from a external HD. i tried it again but still, the error comes.
i have about 3.600 songs in my library, no other stuff. i used a 16 x DVD+R disc for burning. i also burned other stuff with other tools on this type of DVD so it seems not to be a hardware problem.
please, that exporting to DVD thin is the only way to properly transport my library to my new iMac. copiyng it with an external HD wont work so this is the only thing i can do.nobody? meanwhile i retried the process but this time i choose CDs instead of DVDs. it took me a bunch of CDs but at least it worked. BUT after reimport in the Mac iTunes all the coverpics from my own imported cd's where gone. why is that so!? downloaded songs' covers are still there.
-
I recently did the latest update, and then I charged my Ipad 2 afterwards. I went to use my Ipad 2 days later, and it would not even turn on. Then after a couple minutes, the apple logo appeared as if it were loading. It continued to do this for a few minutes, and then the screen starting turning on and off. Then 5 minutes after that, my lock screen appeard and froze. Then it shut itself off again. I tried plugging my ipad into Itunes to do the recovery restore, but I kept getting error messages.
Unable to Update or Restore
http://support.apple.com/kb/HT1808 -
Help with elements 9-mabook pro/10.5.8- have been getting error messages and won't open-reinstalled
Help! I have tried to use my elements 9 which was already installed on my macbook pro 10.5.8 and it has begun giving me error messages that state there are some missing components on the app and I should reinstall. I have reinstalled and am getting the same message. I can't acces the app anywhere on the computer without the error message. Any info or help gratefully accepted.
Thanks,
Molly HuddlestonBarbara,
Not sure what you mean administrative account. I logged on to my
laptop and went to my applications and clicked the icon for PSE and
then the error message comes up. Then i search and found an app
called graphic converter and when I opened it i could still find PSE
on it, tho PSe is nowhere else on my computer that I can find.
Anyway, still don't know what to do...should i try reinstalling it
again?
Molly -
I just bought Windows 7 Pro. Tried to download ITunes for my I phone 4. It starts and then stops and gives error that Quicktime didn't load..no reason given.
It starts and then stops and gives error that Quicktime didn't load..no reason given.
What's the precise text of that message please, tex? (There's a couple of different ones I can think of that you might be getting.) -
i have a new imac with imovie 11 however my everio hd camcorder will only work with imovie 8 or 9. i tried to download imovie 9 but my mac says i don't need the update. How can i download imovie 8 or 9 complete not the update?
I really appreciate all your help. Today I spent some time on the problem. First I purchased any video converter from the ap store and then I connected the camera to the mac with the original usb cable that came with the camera. I turned on the camera and selected backup on pc and the logo came up on my home page. I opened it and after several attempts i found the 3 video files that were on the camera. I then converted them from a tod file to mp4 and then transfered them to imovie. Now I have to figure out how to send the video to youtube or move it to an external hard drive which I have not been able to do. So far I am not too fond of imovie 11. If you could send me the download for imovie 6 I then could try that route. When talking to apple support yesterday about the problem they suggested to get Final Cut Express. It's 200 bucks so before i order the install disc i would like to try your suggestion. My email address is [email protected] Again I thank you very much for your help! George
-
Panasonic NV-EX3 now works with iMovie 2.1.1 on Intel Mac!
This has been a longstanding grumble - my perfectly good, but 8-yr-old Panasonic NV-EX3 DV-camcorder refused to connect with iMovie when I upgraded from my old eMac to my present Mac Mini.
I tried every trick I could think of to get the computer to see the cam, including copying the old iMovie 2 over, but it wouldn't run on the Mini even under Rosetta.
Anyway, I just tried it again, having upgraded to OS 10.5.6, and iMovie 2.1.1 ran fine, and immediately connected with the old camcorder.
I uploaded some video, saved it as a project, and was able to open the project with iMovie HD, so now I have a route to get video in, and the camcorder is reprieved.
I am posting it here in case anyone else has one of these old (but excellent) camcorders and wanted to keep using it.This has been a longstanding grumble - my perfectly good, but 8-yr-old Panasonic NV-EX3 DV-camcorder refused to connect with iMovie when I upgraded from my old eMac to my present Mac Mini.
I tried every trick I could think of to get the computer to see the cam, including copying the old iMovie 2 over, but it wouldn't run on the Mini even under Rosetta.
Anyway, I just tried it again, having upgraded to OS 10.5.6, and iMovie 2.1.1 ran fine, and immediately connected with the old camcorder.
I uploaded some video, saved it as a project, and was able to open the project with iMovie HD, so now I have a route to get video in, and the camcorder is reprieved.
I am posting it here in case anyone else has one of these old (but excellent) camcorders and wanted to keep using it. -
Is there a way to make an audio clip not cover the whole project in iMovie? I want to add audio clip or song and let it start at a certain point in the project. Whenever I add audio or song it covers the whole project. I'm working with iMovie on IPad!
Thank you for your reply Karsten but unfortunately this didn't help me so far. Or maybe I'm missing something?
First the link is a tutorial for iMovie on a Mac. I'm using iMovie on iPad so the steps are inapplicable.
Second it is only possible for me to manipulate the end part of the sound clip to whichever duration I want. But I can't do the same with the 'beginning' of the sound clip.
I simply want to place some photos in the beginning of my video with no sound in the background then after like 2 secs I want to start the music clip. For some reason that is not possible! Cause every time I drop the music clip unto my project timeline it automatically place it self along with the first frame in the project! And consequently the photos and music are forced to start together.
Hope I'm making sense...
Maybe you are looking for
-
Can't print from Windows 8 through Airport
Recently added a Windows 8 pc to my Airport network. After loading Bonjour to the PC, it finds the printer. However, it does not print a test page properly, just a single line about HP-PCL XL;3;0, etc, then blank sheets. Ideas?
-
Failed attempt to update to Safari 3.2.1, subsequent crash
Safari is not working at all for me. It was working fine before I attempted the newest update (3.2.1). Here's the sequence: - I invoked Software Update, it found Safari 3.2.1 as an update. It found NO other updates. - I clicked "Install 1 item"; it p
-
HT203899 My iPhone 4S keeps on resetting while charging.
My iPhone 4S keeps on resetting (show Apple logo and peep with about 20 sec intervals) while charging. This happens since the last iOS update (may be co-incident). Anybody with advice to resolve?
-
Hi all, I know there´s a way to create subfolders in the Presentation level by adding a minus or something like that, but I can't remember it, anyone knows how to do it? Thanks in advance!
-
When I try to transfer the videos to iTunes it doesn't appears. Why? I've tryied a lot of times even i reset my computer and it doesn't transfer to iTunes. Any ideas???