On my Macbook pro 15 2011, System Profiler is suggesting that it uses SATA III for the hard drive and SATA II for the Optical Drive. Is that true?
On my Macbook pro 15, 2011, System Profiler is suggesting that it uses SATA III for the hard drive and SATA II for the Optical Drive. Is that true?
That is correct. The tech specs indicate:
Hard Drive Interface
6.0 Gbps Serial ATA (SATA)
Optical Drive Interface
3.0 or 6.0 Gbps Serial ATA (SATA)
Similar Messages
-
17" Macbook Pro (2011) battery drains or not charging while using intensive CPU
My brand new 17" MBP (August 2011) has a serious problem: Despite the AC adaptor is plugged in, the battery starts to drain (or is unable to charge if it is lower than 95%) when I ran intensive tasks (like rendering with After FX, convert videos with Compressor or start to play a videogame). I tested it and it happens under Mac OS X and Windows 7 (BootCamp).
I readed some user have the same problem with 15" & 17" MBP 2011 models. But I haven't found any solution.
Anyone knows if this is a hardware or software failure? Do I need to ask Apple for a new machine?
Any help will be welcome. Thanks.Thanks Retired Engineer, but I don't think it's normal. Well, maybe it is "normal" (or by definition: common) in the 2011 MBP models, but it doesn't means that there is a problem with its design or hardware.
I have an "old" 15" MBP, which I bought in 2007, and since then it never happened to me that the computer is draining or unable to charge the battery while heavy processor intensive processes. I used the exact same softwares and processes in my new 2011 17" MBP, and then is when I detected the problem.
I read on some forums that this is a common issue with 2011 models. I don't know if Apple has an official answer about this or if there is a solution or workaround. Maybe they could simply shipped this machines with a more powerful AC adapter, able to deliver more than 85W, which seems to be not enough.
I will make further investigation about this, because I think it is a serious problem when it is presented in a computer labeled as "Pro", which I understand is designed to be under heavy usage. -
Windows xp on macbook pro 2011 paralles on the monitor does not work
windows xp on macbook pro 2011 with paralles desktop 6 monitor is working to evil;
windows 7 with bootcamp work but I activate the software does not start on reboot, I apologize for the translation, thanksPost in your native language. There are excellent translators.
-
How to install operating system on new hard drive without installation disc on macbook pro 2011
My macbook pro 2011 does not come with a recovery disc or any disc at all, my hard drive recently failed and i have no backup. i have replaced the hard drive but don't know how to install the operating system on the new hard drive.
If it originally shipped with 10.7 or newer, connect the computer to the Internet and start it up with the Option, Command, and R keys held down. You'll be able to install an OS.
If it shipped with 10.6.8 or earlier and wasn't upgraded to use Apple's Internet Recovery system, phone AppleCare and order the disks.
(109822) -
Bluetooth not working macbook pro 2011, AHT found nothing
My macbook pro 2011 has been having some issues with bluetooth. The system doesn't even recognize as having bluetooth hardware. I went under the hardware profile and it actually says No information found under bluetooth. I was able to do a full hour diagnostic test using Apple Hardware Test and everything was all clean. I'm not sure if this is Yosemite related or not. I definitely remember using my bluetooth enabled keyboard and mouse on my system before I upgraded to Yosemite. Wifi works fine. I've tried resetting PRAM, but nothing. I'm at a loss, not sure if there is anything else I can do.
Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. You may have to leave the machine there for several days.
Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional—ask if you need guidance.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
*An SSD doesn't need to be zeroed. -
Hello
I have a macbook pro 2011 13" that came with OS Lion (integrated not on a disk). I recently bought OS Mountain Lion of the app store and it is working fine. However I was a bit dissapointed in the battery so I decided to try and downgrade and completely failed, I froze the computer and when I restarted it it did not work. I went into recovery system and erased my disk and all that and went to re-download my OS. I was expecting to get the option to re-download Lion but instead I could only re-download Mountain Lion.
My question is since my computer originally came with Lion can I reset my computer so I get OS Lion back instead of OS Mountain Lion?
Thanks for any help. Any answer will be appreciated even if it is saying it is not possible.Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Click on the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Kappy, a pretty wonderful and very knowledgeable man, has tip for that which I have copied and pasted above -
Macbook Pro 2011 charging behaving weird. Charges and stops repeatedly and takes very long. Help?
So a few weeks ago my MacBook Pro 2011 started having charging problems. I would use it normally. Then plug it in to charge anywhere between 5-20 percent like I've been doing for the past year that I've had it (since August 2011). Anyway, what happens now is that it charges but extremely slowly - at least 4 hours to fully charge as opposed to the 1 1/2 to 2 hours that it used to take. Also, it seems to be draining a lot quicker than it used to while only browsing the internet. Furthermore, while charging, the battery meter goes from the percent its charged to to "not charging" back and forth. What's going on? Is there a problem with my battery, my computer, or the magsafe charger? [please refer to the pictures below to get a better understanding of my problem - these pictures were taken over a 2 hour time period - a time period that usually is enough to charge my computer] - if you'll notice, in the first two pictures, the percent barely went up by 10 in a half hour period:
Here are my Mac power stats:
Battery Information:
Model Information:
Serial Number:-----------
Manufacturer: SMP
Device Name: bq20z451
Pack Lot Code: 0
PCB Lot Code: 0
Firmware Version: 406
Hardware Revision: 2
Cell Revision: 158
Charge Information:
Charge Remaining (mAh): 6156
Fully Charged: Yes
Charging: No
Full Charge Capacity (mAh): 6393
Health Information:
Cycle Count: 343
Condition: Normal
Battery Installed: Yes
Amperage (mA): -1607
Voltage (mV): 12182
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 25
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 15
Wake on AC Change: No
Wake on Clamshell Open: Yes
Wake on LAN: Yes
Display Sleep Uses Dim: Yes
GPUSwitch: 2
PrioritizeNetworkReachabilityOverSleep: 0
RestartAfterKernelPanic: 157680000
Standby Delay: 4200
Standby Enabled: 0
Battery Power:
System Sleep Timer (Minutes): 20
Disk Sleep Timer (Minutes): 0
Display Sleep Timer (Minutes): 15
Wake on AC Change: No
Wake on Clamshell Open: Yes
Current Power Source: Yes
Display Sleep Uses Dim: Yes
GPUSwitch: 2
Reduce Brightness: Yes
RestartAfterKernelPanic: 157680000
Standby Delay: 4200
Standby Enabled: 0
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: No
Charging: No
Does anyone have any idea what the problem may be?
Thank you,
macstrtry doing a SMC RESET and see if that sorts it out for you.
if doesn't work - better take it to Apple and have them look at it before something else goes wrong...
good luck - hope you get it sorted out.. -
Macbook Pro 2011 running very slowly after upgrading to Mavericks
I am in deep trouble with my wife so any help would be gratefully accepted.
Shortly after Mavericks became available I upgraded my wife's Macbook Pro 2011 to use the new OS version. Ever since then, the Macbook has been running noticeably slowly. In particular, Mail is almost unusuable taking minutes to open and showing long delays while moving around messages, folders, etc. Excel and Word are also much slower, Safari is slow, in fact just about everything is grinding.
Any ideas on what can I can do to improve things and apease my unhappy wife would be much appreciated.
I have attached the Etrecheck output FYI
Thanks
Andrew
Hardware Information:
MacBook Pro (13-inch, Late 2011)
MacBook Pro - model: MacBookPro8,1
1 2.4 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information:
Intel HD Graphics 3000 - VRAM: 384 MB
System Software:
OS X 10.9.1 (13B42) - Uptime: 0 days 0:5:25
Disk Information:
Hitachi HTS545050B9A302 disk0 : (500.11 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) /: 499.25 GB (361.28 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-8A8
USB Information:
Apple Computer, Inc. IR Receiver
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
FireWire Information:
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[loaded] com.adobe.fpsaud.plist 3rd-Party support link
Launch Agents:
User Launch Agents:
[loaded] com.google.keystone.agent.plist 3rd-Party support link
User Login Items:
Dropbox
Internet Plug-ins:
LogMeInSafari64: Version: 1.0.730 3rd-Party support link
Google Earth Web Plug-in: Version: 6.0 3rd-Party support link
Default Browser: Version: 537 - SDK 10.9
OfficeLiveBrowserPlugin: Version: 12.3.6 3rd-Party support link
Silverlight: Version: 4.0.50401.0 3rd-Party support link
FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6 3rd-Party support link
LogMeIn: Version: 1.0.730 3rd-Party support link
Flash Player: Version: 11.9.900.170 - SDK 10.6 Outdated! Update
QuickTime Plugin: Version: 7.7.3
LogMeInSafari32: Version: 1.0.730 3rd-Party support link
iPhotoPhotocast: Version: 7.0
JavaAppletPlugin: Version: 14.8.0 - SDK 10.9 Outdated! Update
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 1.9 - SDK 10.9
AppleAVBAudio: Version: 2.0.0 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
3rd Party Preference Panes:
Flash Player 3rd-Party support link
Bad Fonts:
None
Old Applications:
/Library/Application Support/Microsoft/MERP2.0
Microsoft Error Reporting: Version: 2.2.9 - SDK 10.4 3rd-Party support link
Microsoft Ship Asserts: Version: 1.1.4 - SDK 10.4 3rd-Party support link
SuperDuper!: Version: 2.7.1 - SDK 10.4 3rd-Party support link
Microsoft AutoUpdate: Version: 2.3.6 - SDK 10.4 3rd-Party support link
/Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
Time Machine:
Time Machine not configured!
Top Processes by CPU:
7% Safari
6% Dropbox
5% WindowServer
3% hidd
2% com.apple.WebKit.Networking
Top Processes by Memory:
119 MB com.apple.IconServicesAgent
106 MB Safari
94 MB Finder
94 MB Dropbox
94 MB Mail
Virtual Memory Information:
1.26 GB Free RAM
1.44 GB Active RAM
311 MB Inactive RAM
1014 MB Wired RAM
251 MB Page-ins
0 B Page-outsLaunch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
Will Remote Desktop allow me to access and use my Mac Pro 2009 from my MacBook Pro 2011?
Own a small business, have two locations, I need to use Windows via Parallels on my Mac Pro 2009, but I am forced to spend most of my time at the other location which has a MacBook Pro 2011. Will Remote Desktop allow me to use the MacBook Pro 2011 to access the Mac Pro and use Windows via Parallels?
If all you need is to be able to control another computer, then ARD would be overkill. If the systems have Mac OS X 10.5 or later you can use the Screen Sharing built into those versions of Mac OS X to control the system.
Another and perhaps easier option is to use a service such as LogMeIn or TeamViewer. Either option may be significantly easier than dealing with screen sharing or ARD.
You'll want to confirm that any solution you choose will work with Parallels, of course. I haven't tried remote control of a system to use Parallals, so there may be special considerations there. If you don't get useful comments here, you might try Parallels' forums.
Regards. -
So I came to this problem a while ago. M ycomputer basically froze so I was forced to shut down by holding the button down. When I started it up I got the flashing folder with a question mark. I started it up holding down the command and r keys which brought me to disk utility. Although my computer doesn't read that I have a hard drive to start it up. When I click on the disk utility app, I cannot verify or repair anything either. The buttons won't allow me to click on them. It also shows "Mac OSX Base System" which shows I have files and what not saved. I had been told that I need a new hard drive so I bought and manually installed a OWC SSD 240GB drive and when i booted the computer up it booted up yo the operating system fine with all my files and what not on there. After about twenty minutes, it froze again. I forced a shut down, restarted and the same thing happened. I am not able to choose my SSD to boot up, although thats probably because it doesn't have an operating system installed on it??
i have a Macbook Pro 13" 2011
any help would be great, I'm overall confused.ryansaint11,
this isn’t Apple support; this is a user-to-user forum. We’re just fellow users of Apple products here.
If you want to boot from your SSD, then you should put the SSD where your HDD currently is, and put the HDD into the optical bay. (That setup will also get you the best performance.) At the moment, you’re still booting from your HDD. Note that you will need to format your SSD in Disk Utility [with the “Mac OS X Extended (Journaled)” format] so that you can install OS X onto it.
Since you have an Early 2011 model, it might or might not have originally come with grey installation DVDs. You will be able to find out whether it did or not by trying to use OS X Internet Recovery to install OS X onto your SSD. If it does not work, or if the installed OS turns out to be Snow Leopard, then it will have originally come with the DVDs, and you should purchase a replacement pair of DVDs from Apple or iFixit; those discs will have your MacBook Pro’s Apple Hardware Test and its iLife apps. If the installed OS turns out to be Lion, then it will not originally have come with the grey installation DVDs, and your Apple Hardware Test will be installed along with Lion, and your iLife apps will be downloadable from the Mac App Store. -
Macbook Pro 2011 - Apple It's time
Hi,
So I'm the owner of a new second-hand 17" Macbook, for years I've dreamed of getting one of these and today was finally the day it happened. Specs are
Macbook Pro 2011 Late
i7 2.4Ghz
6770m
8gb RAM
At first the laptop booted up fine so I decided to do what any new proud macbook owner would do, show it of at work. During the course of the day I experienced intermittent freezing issues and eventually a blue screen of death. I thought to myself that I must of brought a dud and immediately went to contact the person I brought it of for a refund. Being a genuine trader he was more than happy to oblige and give me a full refund. Frustratingly this macbook had already grown on me enough to the point where I was determined to research into solution. Initially I suspected a HDD fault so I went to attempt a apple internet recovery, all that solved was my blue screen of death and changed it to a grey screen of death. Digging deeper it was clear from countless others in my situation that the issue was being caused by the GPU.
Now I'm no apple genius but I have enough of a computer technical background to know when something has not been done right. Now clearly apple has done wrong in the manufacturing process of GPU soldering and thermal paste application. This issue is nowhere relevant to software except for the point in which the system switches from the integrated to the faulty discrete GPU like it's suppose to in high-intensive tasks. Having this macbook for only a day and some determined researching its pretty simple to join the dots. The soldering process and material they used was doomed to fail from the start, eventually all 2011 models with discrete GPU's will burn out, it just depends on how well their owners have taken care of them. In regards to the thermal paste application you will be able to see from my images the kind of care and pride apples has undertaken in applying it. There was more around the CPU & GPU than there was on itself, that's like having a peanut butter and jelly sandwich with most of the peanut butter and jelly smeared around the plate. Considering this laptop would of cost close to 4500NZ back in the day I can't imagine what other original 2011 Macbook owners are feeling.
What makes it worse is that apple techies you go to will say a full logic board replacement will be needed from your own pocket when your macbook was already doomed, isn't that a way to rub further salt into the wounds Apple. Opening up my macbook it was obvious to see that the logic board inside was not the original and sometime during it's lifetime it too had a full logic board replacement. However I can't say if it was for the same reasons. Regardless it's obvious that replacing the logic board does not solve the issue and wastes everybody's time and money.
Apple, these macs require two things.
-A solder repair for the GPU
-A re-application of thermal paste
It's really not that much to ask considering the worth of these laptops, also wouldn't you rather have these leaving a legacy of the ultimate desktop replacement than apples shameful ticking time bomb?
I'm typing this of the very macbook having these issues so for anyone who wants a temporary fix please refer to the free gfxCardStatus software which allows you to force integrated graphics only. For now it's stable but dreadfully hinders the potential this beast was made for.
"Sometimes when you innovate, you make mistakes. It is best to admit them quickly, and get on with improving your other innovations."
"Quality is more important than quantity. One home run is much better than two doubles."
Steve Jobs
In hopes that apple does not remove this post.There is excessive swapping of data between physical memory and virtual memory.
That can happen for two reasons:
You have a long-running process with a memory leak (i.e., a bug), or
You don't have enough memory installed for your usage pattern.
Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
In the Activity Monitor application, select All Processes from the menu in the toolbar, if not already selected. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
View ▹ Columns ▹ Real Memory
from the menu bar.
If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
The process named "Safari Web Content" renders web pages for Safari and other applications. It uses a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider it a prime suspect.
If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
sudo leaks -nocontext -nostacks process | grep total
where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the leaks(1) man page and the Apple developer documentation for details. -
Hey Dears, I was working with my Macbook pro 2011, then i have some flash light in the screen, so i shutdown the computer, when i try to open it again i had a black screen, so any one of you have any idea about what should i have to do ?
Can you start Firefox in [[Safe mode]] ?
You can also do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can initially skip the step to create a new profile, that may not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall -
I've installed windows 7 with the help of bootcamp on my macbook pro 2011.
Please help me how to install mac drivers for windows7 64 bit???You either download drivers from within Boot Camp Assistant and save to USB FAT disk, or you insert and use 10.6.x OS X DVD when in Windows and install and run the SETUP from there.
General Help:
Boot Camp 4.0, OS X Lion: Frequently asked question
http://support.apple.com/kb/HT4818
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
create a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
Installation Guide Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
- support articles and tips, how to.
http://www.apple.com/support/bootcamp/
Macs that work with 64-bit editions of Microsoft Windows Vista and Windows 7
http://support.apple.com/kb/HT1846
Step 4: Install the Boot Camp Drivers for Windows
After installing Windows, install Mac-specific drivers and other software for Windows using your Mac OS X installation disc. The Mac OS X disc installs drivers to support Mac components, including AirPort,built-in iSight camera, the Apple Remote, the trackpad on a portable Mac, and thefunction keys on an Apple keyboard.
The Mac OS X disc also installs the Boot Camp control panel for Windows and theApple Boot Camp system tray item.
To install the Boot Camp drivers:
1 Eject the Windows installation disc.
2 Insert the Mac OS X disc. If the installer doesn’t start automatically, browse the disc using Windows Explorerand double-click the setup.exe file in the Boot Camp directory.
3 Follow the onscreen instructions.
If a message appears that says the software you’re installing has not passed Windows Logo testing, click Continue Anyway.
Windows that appear only briefly during the installation don’t require your input.
If nothing appears to be happening, there may be a hidden window that you mustrespond to. Check the taskbar and look behind open windows.
Important: Do not click the Cancel button in any of the installer dialogs.
4 After your computer restarts, follow the instructions in the Found New Hardware Wizard to update your software drivers (Windows XP only).
5 Follow the instructions for any other wizards that appear.
6 Check for updated Boot Camp drivers by using Apple Software Update or going to www.apple.com/support/bootcamp.
If You Have Problems Installing the Device Drivers
If it appears that the Boot Camp drivers weren’t successfully installed, try repairing them.
To repair Boot Camp drivers:
1 Start up your computer in Windows.
2 Insert your Mac OS X installation disc.
3 If the installer doesn’t start automatically, browse the disc using Windows Explorerand double-click the setup.exe file in the Boot Camp directory.
4 Click Repair and follow the onscreen instructions.
If a message appears that says the software you’re installing has not passed Windows Logo testing, click Continue Anyway.
If you need to reinstall specific drivers, you can install one driver at a time. For example,if your built-in iSight camera isn’t working, you can reinstall just the iSight driver.
Individual drivers are in the Drivers folder on the Mac OS X installation disc. -
Can I install windows 7 on a second internal drive on a macbook pro 2011?
Can I install windows 7 on a second internal drive on a macbook pro 2011? I have 2 500 gb. SSD drives in my 2011 MacBook Pro. My plan was to install windows 7 on the 2nd drive. I'm new at owning Macs so I have had Windows on main drive using bootcamp but I wanted to speed up my 17" Mac so I maxed out the memory and added the SSD drives. Thinking I could put the 2 operating systems on seperate drives I bought to 2 SSD's. Is there any way to do this. So far I have drawn a blank. Any ideas?
Yes. Just install Windows onto it without using the Boot Camp Assistant to partition it.
(124769) -
Can i use hdd + SSD in my macbook pro 2011 ?
can i use hdd + SSD in my macbook pro 2011 ?
cause i already had 750GB and now i am palnnin gto buy SSD to install my system on it and keep the 750Gb as a storge can i ?Go see Bmer here
http://macosg.com/
He's knowledgable about exactly what your wanting to do.
Some drawbacks, you can't boot from any OS (OS X or Windows) installer disk from a external optical drive the Superdrive goes into when you install the kit.
Maybe you are looking for
-
Not able to spy objects in ie9 using coded UI Test Builder Spy, giving exception - "Interface not registered(Exception from HRESULT:0X...." I am not able to capture any objects of my web application using coded ui recorder. Even though it is a simple
-
Cannot see form fields on EBay and Ad trader sites
cannot see form fields on EBay and Ad trader sites. when asked to fill a form with item details the boxes that you have to fill in are missing. using Firefox 3.6.2. i have contacted Ad trader with the question but have got no replies. i have to use I
-
Debug mode - NATIVE_POPUP_LOV - Fallback to legacy LOV support.
Hi, When I consult the debug logs of my pages, I see the rendering of my items. Following the NATIVE_POPUP_LOV items, I see 2 processes. 1- Rewrite SQL to: ... 2- Fallback to legacy LOV support. Please check your SQL statement. I have a question rega
-
Someone purchased a tablet on my account
Back in November my wife was at the store in Alexandria La and the saleslady didn't log out of our account, so the next person in line had his tablet added to my account. Been trying to fix this issue for over 2months, everyone keeps passing the buck
-
SQL Developer:Problem with multi byte size after import using excel format
Hi, Need your help. I am trying to export multibyte characters from our China instance(r11i instance) using SQL Developer's export data via Excel format into an R12 Vision instance. I have a staging table with exactly the same structure in both insta