On my macbook pro i stop doing zoom in the pages with the firefox4.0... why?
with the last firefox insted firefox 4.0 i usualy made zoom in/on on my tradpad on mac.. with two fingers... now with firefox4.0 it doesn´t work anymore
Some gestures have been removed in Firefox 4.
You can restore the zoom feature by changing the values of the related prefs on the <b>about:config</b> page.
browser.gesture.pinch.in cmd_fullZoomReduce
browser.gesture.pinch.in.shift cmd_fullZoomReset
browser.gesture.pinch.out cmd_fullZoomEnlarge
browser.gesture.pinch.out.shift cmd_fullZoomReset
* http://kb.mozillazine.org/about%3Aconfig
Similar Messages
-
MacBook Pro 2009
Model Identifier: MacBookPro5,1
Processor 2.4 GHz Intel Core 2 Duo
Memory 4 GB 1067 MHz DDR3
Software OS X 10.8.5 (12F45)
Iphoto '11
Iphoto on my macbook pro has stopped working. It comes up with a message saying that the library is either being used by another user or it is unreadable. Any ideas why I should be receiving this message?
"Your photo library is either in use by another application or has become unreadable"
Offered solution doesn't work:
Shut down and restart your computer, and then open iPhoto again. If the problem persists, try rebuilding your photo library. To do this, quit iPhoto, and then reopen it while keeping the Option and Command keys pressed. You can also try restoring your photo library from a backup.
I have already copied my photographs to the a library manager but when I tried to reuse iphoto and import the photos back into iphoto, it would not let me.
I can't download photographs from my iphone or my digital camera.
Any ideas on how I can solve this problem?
There is a possibility that when I went to update applications that I started to install Mavericks which I then interrupted and cancelled. I am not definite that this caused this problem but it was at about the same time as when this problem started.
Many thanks,
EdI have already copied my photographs to the a library manager but when I tried to reuse iphoto and import the photos back into iphoto, it would not let me.
You can't "copy" your photos to the "library manager", there is just no way to any such thing.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD -
I am using Quickbooks Pro with my macbook pro. It does not allow me to use the @ symbol when I am inputting an email address into the client information section. What do I do?
stefani88 wrote: It seems from other discussions my current OS on my laptop is the reason why it won't sync but people running older versions of windows aren't having a problem. So I don't get it.
Oh. Gosh. What's Windows got to do with anything? You're on Leopard, on a Mac.
It seems from other discussions my current OS on my laptop is the reason why it won't sync -
My MacBook Pro (version 10.7.5 4GB)keeps crashing with the error message 'Your MAC OSX start up disk has no more space available for application memory' - what do i do. I keep force quitting the applications and turning the computer off but it happens again after a while
Hhow much goal and free hard disk space is available? Sounds like you need to move some things off of that hard drive.
-
Should I get a 2.0 or 3.0 USB external hard drive for my 2011 Macbook Pro? I need it to be compatible with the USB ports of both a PC and a Mac. I was thinking of getting a Seagate becuase apparently it is compatible with both systems, but I want to know which would be a better investment.
Using USB 3 devices on Mac computers FAQ
-
I bought my macbook pro on August 2011 at an apple store, with the Intel i7. However mirrorring in not working with two of my Apple TVs. These Apple TVs are 2nd and 3rd generation loaded with the latest software. I can succesfully transmit from my itunes on my Macbook pro to both Apple TVs, but I can not see the airplay icon on the taskbar. Can someone help?
About AirPlay and Airplay Mirroring
AirPlay Mirroring requires a second-generation Apple TV or later, and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). For non-qualifying Macs you can try using Air Parrot.
Several Apple Articles Regarding AirPlay
Apple TV (2nd and 3rd gen)- How to use AirPlay Mirroring
How to set up and configure AirPort Express for AirPlay and iTunes
About AirPlay Mirroring in OS X Mountain Lion
iTunes 10- About playing music with AirPlay
Troubleshooting AirPlay and AirPlay Mirroring
Using AirPlay -
Macbook Pro will not read CD. Comes up with the message "The disk you inserted was not readable by computer"
Is it a hardware problem or a software problem?
Any help solving this would be appreciatedHello M1ckyD,
The article linked below details a number of troubleshooting steps that can help resolve issues with your Mac's Optical Drive.
Apple Computers: Troubleshooting the slot-loading SuperDrive
http://support.apple.com/kb/HT2801
Cheers,
Allen -
ever since i updated software on my macbook pro, yahoo mail new version is constantly crashing with the spinning ball of death. any ideas?
What is the exact spec of the clips that cause the problem?
(Open one of the files with QuickTime and press Cmd+i to open the Inspector - then report back with the what it says).
Andy -
My macbook will not start up. It gets stuck on teh opening page with the apple. It was working fine and all of a sudden i cant get it to work. Does anyone know what could be wrong with it? Or, is there a bypass to the start up page?
You won't lose your files unless something goes very wrong -- which may already have happened. You absolutely must have a backup before you do anything else. If you don't already have one, boot from your installation disc and follow the instructions in this article under "Instructions for backing up to an external hard disk via Disk Utility":
Mac OS X v10.5, v10.6: How to back up and restore your files -
Zoom in/on with the fingers on the trackpad of my mac doesn´t work withe firefox4.0
Some gestures have been removed in Firefox 4.
You can restore the zoom feature by changing the values of the related prefs on the <b>about:config</b> page.
browser.gesture.pinch.in cmd_fullZoomReduce
browser.gesture.pinch.in.shift cmd_fullZoomReset
browser.gesture.pinch.out cmd_fullZoomEnlarge
browser.gesture.pinch.out.shift cmd_fullZoomReset
* http://kb.mozillazine.org/about%3Aconfig -
My macbook pro is frozen - does not turned on - stuck on the opening screen (apple logo). thoughts?
any ideas how to get it going?
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into Recovery by holding down the key combination command-R at the startup chime, or from a local Time Machine backup volume (option key at startup.) Release the keys when you see a gray screen with a spinning dial. When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in the support article linked below, under “Instructions for backing up to an external hard disk via Disk Utility.”
How to back up and restore your files
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire or Thunderbolt cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
How to use and troubleshoot FireWire target disk mode
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Before reconnecting an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode.* The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Post for further instructions.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
If you can boot and log in now, reboot as usual (i.e., not in safe mode.) If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM and PRAM.
Step 5
Launch Disk Utility in Recovery mode (see above for instructions.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it produces. Look for the line "Permissions repaired successfully" at the end of the output. Then reboot as usual.
Step 6
Boot into Recovery again. When the OS X Utilities screen appears, follow the prompts to reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with networks that require any kind of authentication other than a WPA or WPA2 Personal password.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
Step 8
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
*An SSD doesn't need to be zeroed. -
I have a mid-2009 13" Macbook Pro running OS X 10.9.4 and I've been noticing a problem lately (I think it used to happen before too but not as often as now). My screen will sometimes go black, and my cursor remains visible. It will stay like this, regardless of button mashing or trackpad tapping and clicking. It usually doesn't stay for too long but the other day it was staying like that for a good 5 minutes before switching back to the password-enter screen. It happens sometimes when the computer goes to sleep but sometimes it suddenly happens in the middle of use, stopping whatever I'm doing and locking me out for a few minutes. I want to know why this happens and how to prevent it from happening (or perhaps there just needs to be a patch?). What is particularly strange is that my girlfriend just bought a brand new Macbook Air and she already has the same exact problem as me.
Blank (lighted, but black) screen with cursor at bootup
[SOLVED] - Macbook Air Sleep/Wake problem
Dark screen on start-up can only see curser -
My old MacBook Pro 13" 2011 (2.4 Ghz, Intel core duo, 10Gb RAM, 250Mb HD) was running on Lion 10.7 (upgraded last Spring from the original Snow Leopard). As I got a new laptop just a week ago, I was trying to restore the old one to the original factory settings and resell it.
After unsuccessfully trying to restore Lion with the remote apple server and after going through several messages here in the community, I was finally able to re install the original Snow Leopard system from the Mac Os X install DVD that came with the computer. I did that booting the laptop from the DVD, going to disc Utility, making the partition GUID formatted Mac Os Journal extended, and then installing the system. The hard drive had been erased previously.
It all seemed to work well; I had intended to shut down and leave the option to the future owner to configure the computer and perform the additional installs. But to double check that everything was ok, I decided to go ahead instead, and install the applications that were on a separate DVD (AHT Version 3A192, Disc Version 2.0), like iPhoto, iMovie, iDVD, etc. Unfortunately, as soon as the installer would begin to work, after clicking on the agreement and all the preliminary steps, it would quit with an error. I tried several times.
Does anybody have a clue of what happened and how I can fix it? I hope you can help me! Thank you!Selling old Mac
Selling old Mac (2)
Selling old Mac (3)
Selling old Mac (4) Apple support -
MacBook Pro refuses to read OS X discs included with the system
Hey there,
First post, go easy on me.
I got a MacBook Pro last Thursday. Performance has been great, and none of the problems present on other systems appear to be present on it.
After several days of use, I had experienced a number of errors where the screen greys out, and a window pops up telling you that you must restart the system, upon doing which an error report is fired off. This, along with a little AirPort problem (it says it connects to my network on startup, but I always have to wriggle airport on and off to get it to really connect), have convinced me to reinstall the OS in case one of the firmware updates hit a wrong bit or something.
So I put my install disk in for the first time. It sits in the drive, no spinning or noise at all, and then it gets spit out a minute later. Oddly enough, the disc from my iMac is read fine on the MacBook Pro (although I am informed at startup that I can't use that particular disc to install). For the record, the MacBook Pro disc works fine in the iMac.
So does anyone have any idea what's going on with any of my problems? I'm going to call support tomorrow, but I was wondering if anyone was familiar with this very odd disc behaviour. Data CDs and DVDs are read fine by the MBP, it is literally just the OS X discs that cannot be read.
Any help, comments, or things I should mention to support are greatly, greatly appreciated. I hate thinking I paid nearly 4k for a lemon.That thread fixed my AirPort problem.
Also, I remembered that I did use my MacBook Pro OS X disc to install X11, and the only thing of consequence that I did afterwards was installing the firmware update.
Is there any way to roll back the firmware update so I can see if that caused this problem. It's the only thing with system-wide repurcussions that I can recall performing on the system.
The Firmware Restoration CDs from Apple's site only work if your firmware updater crashed or was interrupted in the process of update. . .is there any other way I can restore my factory original firmware?
Thanks in advance. For the record, I have experienced no kernel panics in 3 days. I'm wondering if maybe they were being caused by software issues (I've had a few while seeing how Rosetta handles things on the MBP). -
My macbook pro 2.2ghz, i7 , early 2011 having problem with the graphic card
hi, just need clarification, that i was made to understand that the NVDIA graphic card installed in Macbook Pro, has a warranty of 3 years, eventough without Apple Protection Plan. Can someone clarify this , as i m having problem with it now.
No, the GPU does not have a seperate 'three year warranty'... unless you purchased the extended AppleCare Protection Plan.
If you feel that you're having problems with your GPU, take your machine to your local Apple Store or an AASP and have them run a free diagnostic test. If the card is faulty, and you don't have a APP, you'll have to pay to have the entire logic board replaced.
Clinton
Maybe you are looking for
-
Multiple domains names and web sites with only one SLS and one static IP
I tried to find a post on this topic but I still can't find what needs to be done. SLS is configured for one domain with one web site and it's working well. We will call it domain1.com. Here is the config: Static IP: 69.x.x.x DNS setting under Server
-
My Iphone 4 32GB started having this issue when I downloaded the 2 last 6.1.X... VOICE CONTROL pops-up even when I sleep and calls random people just by the sound of the snoring... in FACETIME even more annoying. I confirm that it does this day and n
-
I may need to reformat my computer soon. It has been acting badly. So, in accordance with instructions I have gotten from FLASH I deactivated Flash Pro CS6 before I turned off my computer to save myself a problem if the computer died before I deact
-
Can CR 2008 with XML ODBC driver using SQL CASE statement?
Hi: when i use SQL Command to provide data to the report from XML file connection. I can not use CASE statement , CR always has error message about "CASE" word. I test the same Statement in SQL client connected to Oracle, it runs fine. So.. Is it dri
-
Brand new 7th gen iPod nano -- just received today. Keeps rebooting every 5-15 seconds. I've tried reformatting, rebooting, resetting... every single "fix" I can find on the Internet and nothing works. Please HELP! Support closed for holiday...