On/off Button and brightness buttons don't work in the Apple Cinema Display

I write you because I bought a new apple cinema display 20" a month ago and I have problems with the on and off button and the brightness buttons. Thew work sometimes. I think that te problem is windows XP but I am not sure. My graphics card is a ATI RADEON X800 GT Gecube 256 Mb DDR2.
Would yo mind telling me how can repair that? If I need something to repair o it is better to buy the new windows to avoid that problem.
  Windows XP Pro   ATI Radeon X800GT Gecube 256 Mb DDR2

Thank you very much. I didn't know this driver.
But the problem was when I was installing this driver, Windows said that it's imcompatible with windows XP.Is this normal? o I need to download a special edition for windows xp.

Similar Messages

  • HT1430 My phone locked up during sync to I tunes,   Power button and sleep/wake don't work

    My  phone locked up during sync to I tunes,  Power button and sleep/wake don't work.

    We here http://support.apple.com/kb/HT1808 and here http://support.apple.com/kb/ht4097

  • I have the i phone four and just uploaded to my computer and now it will not work  has the apple logo with a long oval bar under it

    i have the i phone four and just uploaded to my computer and now it will not work  has the apple logo with a long oval bar under it

    It may be that it is stuck loading. You will want to probably first attempt a Hard Reset (Home Button + Power Button for 5-10s until it restarts with an Apple Logo then let it load up) and see if this will get it working.

  • Qosmio G35-600 - Control buttons and card reader don't work

    Hi,
    So I recently installed windows XP on my Toshiba Qosmio G35-600 and I found all the drivers except for two. If anyone out there could help me find them that would be great.
    1) The first driver I cannot find is for the Toshiba control buttons at the top of my keyboard (I believe that is what they are called). Quosmios have 12 buttons on the top above the F keys, and currently only my power button, the brightness up and down buttons, and the dolby sound buttons work. The analog TV button, the media center button, play, stop, previous, next,record, and s-video out buttons don't do anything anymore. It would be cool if i had an s-video out ability again but mostly what i want is the play, previous, and next buttons to work.
    2)The second problem I am having is with my built in SD card reader. A few times I thought I found the correct driver but after installing it the SD card was not showing up in my computer.
    A preemptive thanks for the help,
    Xamboni

    Hello
    I think you should install the Toshiba controls for Windows XP that you can find on the Toshiba website. Check this!
    http://www.csd.toshiba.com
    The driver for the SD card slot you can find on the Toshiba website too.
    What SD card have you tried?
    Try it with an other SD card and use the Toshiba SD card utility to format the card.
    Greets

  • HT4759 How do I upgrade my iOS I use an iPad one and  some apps don't work for the iOS I'm running , help,

    Help , I don't know how to update my iOS on the iPad one some apps won't work with the one I have and are suggesting that I update . Can someone help me figure this out.

    See the chart below to determine whether you can upgrade your device and what you can upgrade to. If you do not have a Software Update option present on your iDevice, then you are trying to upgrade to iOS 5 or higher. You will have to connect your device to your computer and open iTunes in order to upgrade.
    IPhone, iPod Touch, and iPad iOS Compatibility Chart
         Device                                       iOS Verson
    iPhone 1                                      iOS 3.1.3
    iPhone 3G                                   iOS 4.2.1
    iPhone 3GS                                 iOS 6.1.x
    iPhone 4                                      iOS 7.0.x
    iPhone 4S                                    iOS 7.0.x
    iPhone 5                                      iOS 7.0.x
    iPhone 5c                                     iOS 7.0.x
    iPhone 5s                                     iOS 7.0.x
    iPod Touch 1                               iOS 3.1.3
    iPod Touch 2                               iOS 4.2.1
    iPod Touch 3                               iOS 5.1.1
    iPod Touch 4                               iOS 6.1.x
    iPod Touch 5                               iOS 7.0.x
    iPad 1                                          iOS 5.1.1
    iPad 2                                          iOS 7.0.x
    iPad 3                                          iOS 7.0.x
    iPad 4                                          iOS 7.0.x
    iPad Mini                                      iOS 7.0.x
    iPad Air                                        iOS 7.0.x
    =====================================
    Select the method most appropriate for your situation.
    Upgrading iOS
       1. How to update your iPhone, iPad, or iPod Touch
       2. iPhone Support
       3. iPod Touch Support
       4. iPad Support
         a. Updating Your iOS from iOS 5
              Tap Settings > General > Software Update
         If an update is available there will be an active Update button. If you are current,
         then you will see a gray screen with a message saying your are up to date.
         b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
         c. Resolving update problems
            1. iOS - Unable to update or restore
            2. iOS- Resolving update and restore alert messages

  • Want to use parental controls to prevent myself from being able to be on certain websites, but i can't do so on my account because i'm the administrator and parental controls don't work with the administrator. How can i do this?

    go on certain websites, but i can't use parental controls on my account because i'm the administrator. How do i prevent access to websites?

    Thanks for the reply, BUT --- i can't fool myself. I can make all the other accounts i want, but i'll still be able to get into the admin account and therefore have access to the websites i don't want to have access to. Is there a way to block websites from ALL accounts?

  • My Front facing Camera and video chat don't work since the latest OS download

    My playbook is over a year old and worked great until the new OS download.  Now when i go to my camera and try to put it on the front facing camera to take a picture i get ERROR.4003 PIcture.  When I try to go on video chat it states that another application is using the camera. please close the other application and try again.  And there is nothing else open.  I tried security wiping my playbook and reinstalling the software and the error is still there.  I even tried hard rebooting it by holding down the power/vol +/vol- and that was to no avail.  I am no longer covered by warranty.  Do i need to send this to BB to get it fixed or is there a software fix that can be downloaded?

    Contact RIM. They can help whether it is out of warranty or not.
    BlackBerry Playbook Help desks:
    Germany: 0800 1816530 (Gebührenfrei)
    North-America: 1 877 255 2377 (Toll Free)
    UK: 0808 100 7466 (Toll Free UK only)
    Outside UK: +44 1753 558400
    Worldwide: 1 519 888 6181

  • HT1331 I just bought a airport wireless router I have a time warner cable modem. I have hook up the modem correctly to my new apple airport router and my modem is not working with the apple airport router. what do i need to do?

    I just bought a airport wireless route and I have a time warner modem. My problem is my modem is not connecting to my apple airport router. What do I need to do?

    Power cycle the cable modem.. you may try leaving it off 5min.. might be enough.. sometimes you need 15min or even longer.. Followed by power cycle of the AE.
    Nothing else should be connected to the modem.. except the router that will get the public IP as they only hand out ONE>

  • HT1595 When I connect with my wifi it comes up as connected to wifi but not the Internet and all my other devices work except the Apple TV and I'm not sure what to do

    At first my Apple TV was stuck so I unplugged it and re plugged it so everything disappeared all my apps everything then when I tried hooking up to my Internet it said connected to wifi but cannot connect to the Internet so I'm not sure what that means or how to fix it

    GH
    When you say everything disappeared do you still have Computers and Settings icons?  Try rebooting the router  and apple tv with all cables out for 30 seconds.  Does it work eathernet connected if you can try that too?
    Jules

  • After upgrading to Mavericks, F14/F15 brightness adjustments don't work

    After upgrading to Mavericks, F14/F15 brightness adjustments don't work.  The screen appears to be "locked" at the dimmest brightness level.  How do I adjust the brightness?

    I am home now and I just confirmed that I have a brightness control slide in my Sys Pre---> Display. However, this for my Apple Cinema display. When I was using another name brand, this wasn't available to me. Nor could I use F1 and F2.
    I also went to Sys Pre---> Keyboard---> Shortcuts---> Display---> Changed those values to F5 and F6, since they were free for me. And they were able to change the brightness for me. Went to test them, and I was just given that error chim and nothing on the display changed.
    So I went on down the list... Accessibility---> checked Contrast and changed those to F5 and F6. Ahhh, now I can change that. Now I know that I can use the F5 and F6 for something.
    I know that you are talking about brightness, but double check the Contrast settings to see if you were mistaking the two. After years of setting my TV with Video Essentials, I still get the two mixed up from time to time.
    KOT

  • ADDT Datepicker and spry validation don't work together

    Datepicker and spry validation don't work together
    the problem is in: /includes/wdg/classes/MXWidgets.js
    (necessary to datepicker)
    Does anyone have a solution??
    Thanks

    Hi Gabriele,
    technically speaking, ADDT and the Spry framework have about nothing in common, and you´re going to stumble across many compatibility-related issues when trying to use them together.
    Does anyone have a solution??
    any regular user who´d like to provide a solution to this, would have to be a pretty skilled programmer and would have to know the "technical details" of both ADDT and SPRY very well to be of help -- I don´t think that you´ll find many folks here who are capable to do that.
    However, why not making the date field required in ADDT ?
    Cheers,
    Günter Schenk
    Adobe Community Expert, Dreamweaver

  • Volume and brightness buttons don't work anymore

    I did a complete restore from factory DVD and since then the volume and brightness buttons don't work anymore.  I have an All-in-One AE1900.  Anybody can help me fix this problem?  Since I do not have the original keyboard anymore, I can't use the hot key combination to do it.  Thanks for your help.

    I've had this same problem, but when I am using "Parallels" to run windows programs on my new Macbook Air, with an external Mac LED Cinema Display, the brightness keys on the external apple keyboard do not work.  Sound seems to work fine.  They work fine in Mac mode. 
    Any solutions?

  • If I don't have apple care, and I bought my iPhone off somebody else, would Apple still replace my iPhone 5? my lock button and home button have been glitching

    my phone has been working fabulously and I bought it off somebody else in next to new condition. however, lately the phone button and lock button haven't been working properly. the phone also heats up and gets quite hot when it's charging sometimes. would Apple replace my phone for free ?

    If it is still under warranty and the issue is the result of manufacturer defect, Apple will replace it at no cost.
    If the device is not under warranty or the issue is the result of damage, Apple will offer and Out of Warranty Replacement.
    Warranty has nothing to do with the person presenting the device, it is entirely determined by the device.  Warranty is 1 year from the date of original sale.

  • My iphone 4s' screen is black, but it's still on and charging. I broke my lock screen button so I am unable to turn it off using the home button and lock button. Is there any other way my phone can restart or turn off ? Is my phone broken for sure?

    My iphone 4s' screen is black, but it's still on and charging. I broke my lock screen button so I am unable to turn it off using the home button and lock button. Is there any other way my phone can restart or turn off ? Is my phone broken for sure?

    Kbkohn wrote:
    I am in tears right now because I entered all my 11month old sons milestones into my phone and now I have nothing I'm so upset and am hoping there is a way to get this information back. 
    Most intelligent people would not store such sensitive data on a device that could so easily be lost, stolen, or damaged.  Even if they chose to do so, they would use the device as designed and regularly sync and backup that device as described in the User's Guide.
    Have you done so?  If you have, all of the data is either in iCloud or iTunes on your computer.  Replace the device and restore the new iDevice with the backup of the old one.

  • Sound and brightness buttons dont work anymore

    my sound and brightness buttons dont work any more unless I hold down the function button. This happened after I downloaded the new update I think. Is there any key combination that I could have hit that made this happen?

    Go to System Preferences->KeyBoard & Mouse->KeyBoard and make sure "Use the F1-F12 keys to control software featues" is off. It probably got turned on somehow by the update.

Maybe you are looking for

  • HT1296 How do I transfer music already on my Windows Vista PC to my new iPod Touch?

    I have a new iPod touch and want to transfer music files already on my Windows PC to it.  I can't work out how to do this as all music information seems to relte to itunes and these are not commercially available files - Help!

  • Remote speaker is not compatible with this version of iTunes?

    I'm having a problem connecting to my remote speakers when I want to play some music through iTunes. A display message appears stating: The remote speaker is not compatible with this version of iTunes. I have the newest version of iTunes i.e. 7.0.2 a

  • Need to wrap text in af:column

    Hi, i have a af:column with output text. Need to wrap the text in output text. Tried setting the NoWrap to false, but did not work. Below is the code. I really appreciate if someone could help me in fixing this issue. <af:table value="#{bindings.POC.

  • Linux(GNOME) window focus\z-order problem

    Hi, we are having issues with an application we are developing, when you login we create a JWindow "splash screen" which is just a picture, if there there is an error whilst the splash is displayed, and error box(JDialog) appears displaying the error

  • Modify dynamically Static LOV and System Tables

    Hello, Does anyone know if it is possible to dynamically modify a Static LOV using a system table. All suggestions greatly appreciated! Sharon