On/off indicator?

I'm new to blackberry. I have the Pearl 8100. Can anyone tell me if there is an way to have the phone indicate by a flashing led or something that it is on? I know it sounds a bit lame, but since the screen blanks when not in use, I find that there is no way to tell if the phone is on or off. With mute set, even hitting a button does nothing. I've let the battery die because I thought that I had turned the phone off.
I've searched the app store, but so far have been unable to find an app for that.
Thank you
Grant Wilkinson
Ottawa ON Canada
Solved!
Go to Solution.

You can activate the flashing LED that blinks when the phone is in radio coverage. Go to Options -> Display -> Coverage indicator
If your question was answered, please accept it as a sollution and / or give Kudos ;-)
Use the Search Field first! Maybe the question you want to ask already exists!

Similar Messages

Less-off indicator in VBAP

hi all,
can someone tell me what is the meaning of 'les-off indicator' in VBAP-MVGR1.
is it something to do with negative values for items in BOM?
thanks

You can use material groups when maintaining a material master record. Since these material groups are not used in the standard SAP R/3 System, you can use them as required, for example, for analyses.

TS3048 Even after installing new batteries and switching it on my magic mouse does not work. Sometimes it works but switches off (indicator light goes off) on its own after a few minutes.

Even after installing new batteries and switching it on my magic mouse does not work. Sometimes it works but switches off (indicator light goes off) on its own after a few minutes.

Try resetting the PRAM and SMC. Try making the device a favorite .
Barry

Config to Turn Off Indicator for Billing Plan in Header

Hi,
anyone knows whether there is a config that is able to turn off (or default as blank) for the indicator for "billing plan in header" that is found in the item's billing plan? This is the indicator that cause the item billing plan dates to copy from header's billing plan.
I am trying to write a program that create sales order with billing plan using BAPI_SALESORDER_CREATEFROMDAT2. As this BAPI does not allow me to change the item billing plan dates, I am looking at using the stardard program SDFPLA02 after the BAPI is called. However, for the program to work, I need this "Billing Plan in Header" un-tick,
Or, is BAPI_SALESORDER_CREATEFROMDAT2 able to un-tick this indicator?
Regards,
Norman

Hi,
In SPRO> Sales and Distribution> Billing> Billing Plan> Assign Billing Plan type to Sales Document type.
Remove the assignment.
Hope this helps.
Regards,
Sharan
Edited by: SharanKumar.S on Oct 3, 2011 11:25 AM

Using Apple Monitor - on/off indicator reversed..

My mini is connected to the 23" Apple display (early 2008).
When its running, the screen on/off LED is off. When I shut the Mini down, it is switching from off to on. This is rather irritating.
Is anyone else having that issue? What is going on there?
(This issue did not exist on my old mini (late 2005) using Tiger)

Hey Mikey
I had a similar problem with my new MacPro. Couldn't get my Lacie CRT to work with it although it worked fine with my G5. Apple sent me a new video card and we replaced it today. Works like a dream. Give AppleCare a call and they will most likely send you a new video card. They have been having problems with some of the ones that had shipped.

Satellite R845-s80 dead after bios sw update & restart. On/Off Indicator blinking

Laptop showed up bios update. On downloading and installation, system asked me for an restart. Laptop refuses to start with or without battery. Power indicator keeps blinking. screen is black. Even pressing power switch for 30 to 40 seconds nothing happens. Battery is not charging. Any suggestions to awaken/revive pc will be appreciated. Laptop is almost new.

If you can't solve your issue and no one in the community can help, contact support to speak with a tech support agent at (800) 457-7777.
- Peter

How do you know if the wireless keyboard is turned on or off?

When I press the power button on the wireless keyboard (A1314) the tiny light lights up and then goes out. When I press the power key again the tiny light lights up and then goes out. How can I tell which is which? When is the keyboard on and when is it off?
If I leave the keyboard on for days will the batteries die or does it turn itself off after a certain amount of time? None of the instructions tell about these things.
TIA,
Ken

I would only hope that the keyboard would turn off, not just when it isn't pairing with the computer, but for the keyboard that is paired (mine is) it would be best if it turned off after a period of no use. Here is what one man, not an Apple tech, said about the A1314 keyboard he was selling on ebay:
"The keyboard automatically powers down when you're not using it and turns on instantly as soon as you start typing. This intelligent power management means you'll get up to nine months of battery life based on average usage patterns. It also has an on/off switch for when you're away from your computer for a long time."
This doesn't indicate how many minutes of no use it needs before it 'powers down' (doesn't sound as good as really being turned off) and it also doesn't address the issue of knowing if your keyboard is on or off via the power button.
Even my dog electric training collar blinks twice when it is turned on and blinks three times when it is turned off. The Apple keyboard needs two indicator lights, one to tell you if it is searching for pairing and the other strictly as an on off indicator. I'm not going to loose any sleep over this, but it does seem like somebody was sleeping in the design department as this keyboard is really cool, but it doesn't convey the basic on/off information to the user.

Sony Xperia Z1 No Alarm Display and Unable to switch off alarm

Eversince I had the first Android Kit Kat update, my Xperia Z1 C6903 was not able to hear any notification sounds, my alarm sound worked but unable to switch it off or delete it and when my contacts call me, it send it straight to voicemail and I don't even hear the notifcation call sounds either. Did a reboot and went on safe mode, I still had the same problem. Found out online that there is a sound bug with my current firmware version: 14.3.A.0.681.
When the new update 14.3.A.0.757 was available, I downloaded it. After this, my sound notifications worked fine, however, my alarm is still not working. Both on normal and safety mode, my alarm does the following:
1) The alarm sound works
2) Side key behaviour does not show up on my screen, so I am not able to dismiss my alarm
3) I manually go to my "Alarm and Clock" app and press the "OFF" indicator. Alarm sound does not stop.
4) I have to go to > alarm settings >Delete alarms >Choose the current alarm to delete > Alarm Sound then stops.
This has been happening eversince the Android Kit Kat version was available for download (the previous and current one). I have reboot my phone, gone on safety mode, I have gone to >Settings >APPS> All> Clock > Clear Data, and went to the Sony PC Companion > Support Zone > Repair phone/tablet, as well as deleted all my apps.
I do not know what else to do. I can only conclude that this is an existing problem with the new software update. I need my alarm working or else I am unable to get up for my morning meetings. PLEASE HELP!

so i have been having the exact problem on my Z1. the alrm goes off at the right time....the notification works perfectly but you just cannot switch it off or snooze it. if i go to the drop down menu the active alarm is not listed there...the side buttons dont work or have no effect even when configured.
you literally have to power the phone off for it to stop sounding. this is really annoying and i notice that teh last comment here was a month ago and Sony have still not addressed this problem. if you google this issue there a stacks of people with the same problem and more frustarted as we keep getting suggested fixes like clear clock cache which EVERYONE knows will not work as the problem is not with the data of the alarm....its a bug in the software that prevents the app from excuting teh way it was intended to.
my alarms worked perfectly fine before teh update was applied. ever since teh update i ahev had this problem. i dont believe that a solution is to install another alarm app from google play store. i bought the phone which advertises the alarm as a feature and if sony cannot fix or address this probelm then you have falsely advertised...
i am a sold out sony fan...i will never purchase any other brand of phone based on my past experience with sony products but this problem is making me think otherwise. give us a proper fix for this alarm issue and dont treat us like ignorant fools with your suggessted fixes like start in safe mode or reboot your phone....that will never ever fix the problem....its just a way of avoiding the fact that you dont know what to do to fix this problem...

HEcess Round-Off in J1IEX

Hi Guys,
See I want round off HECess in PO and J1IEX.
So I have maintained Rounding Rule for that Condition type and also I maintained item level excise duty round off Indicator for Procurement in Company code settings in Basic Settings.Even after this aslo EHcess is not getting Round off.
Can any expert Pls look into this and give me a Solution.Whether I have to do any settings or I have to apply any notes.
Thanks in advance
With Regards
H.Sathish Kumar

In OMR6 Pl.set Tolerance limit
If you want to round off the Values in the amount field at the time of invoice posting in MIRO.
There will be a small difference amount positive or neagtive in the Balance field.
System does not automatically round off the values. It is manuall rounding only.
Maintain the Tolerance key DIF for the Compnay code . Mainatin the Toleransace values says + or - 0.50 USD in OMR6. & selec the Check limit boxes

Unpluggin the Ethernet is Different Than Turning Off The Server!

Hi All,
I am working with a cFP2020 with a 4 space backplane. I am running Labview 8.0 RT. Have not gotten around to putting in the latest set of CD's I just got sent. I have the whole setup on my desk here and am noticing a potential problem for my application. Was hoping that someone could explain this to me?
I am building a vehicle, with the cFP on the vehicle and a PC controlling the vehicle. Mostly Im turning on lights and reading sensors on the vehicle, but I am transmitting some commands.
My perfect world would be that if I lost communication between the vehicle and the PC, that the vehicle would recognize this within a reasonable ammount of time (1-2 seconds) and stop itself. I would like a whole routine for "com failure" to run if that is the case.
My questions:
It does not look like I want to use the fieldpoint watchdog because everything I have read indicates that on a watchdog com error, the fieldpoint shuts down. Am I wrong? Should I look further into this?
I wrote my own watchdog. It sends messages back and forth on shared variables. If a message is late, it turns off a light (using cFP led's on the main module.) The PC VI is running as part of the project. The Vehicle VI (on the cFP) is compiled as an application that runs on startup. I have experimented alot with failure situations. The following work fine:
- Stopping the PC VI that communicates with the vehicle VI. The light on the cFP turns off fine.
- Stopping the Shared Varaible Engine. "Undeploy" on the shared varaible in the project. The light turns off fine. Infact both the PC and the Vehicle VI's register the dissconnect with their lights.
The following does not work right:
- Unplugging the ethernet link! The VI on the vehicle (cFP) is still running (got another blinking light going), however it takes 11-16 seconds for the light to turn off, indicating the disconnect. This is quite a bit longer than the other methods that work fine (those are about 1-3 seconds). Can anyone think what is going on?
I know this seems like an essoteric question, but it gets to the protocal for the cFP. Should I be running my PC VI as an application? I am running it in the project.
Thanks
Kevan -
As an aside, is there a way to deploy an application and have it run immediatly upon deploy. I am having to reboot to run the application. I notice different performance if its running from the project v. it running as an app. Since I will be using it as an app in the final product, I want to test it that way.
Thanks Again -

Kevan,
The quick answer is that most NI ethernet protocols are implemented with 10 second timeouts. This is different than the undeploy in that stopping the shared variable engine will send unsubscribe messages rather than timing out. (Note: I am making an assumption on how the shared variable protocol works because it is partially based on the older Logos protocol used in Fieldpoint, and that is how the closing works for Logos).
As for the watchdogs, there are two watchdogs in [c]FP RT modules; the RT watchdog (which can reboot the controller) and the network communications watchdog (which can set one or more outputs to a desired state on loss of communication).
For a very rapid communication link disconnect, implement the shared variable as a boolean that has it's state inverted every half second. Have the [c]FP controller read the variable and look for changes in the state of the variable. If the variable does not change at the update rate (with some small margin for timing), then you have probably lost the link prior to getting a full network timeout.
Regards,
Aaron

Dock Indicator Lights Gone

Greetings. Ever since updating to 10.8.4 my Dock indicator lights no longer appear. I've searched discussions and tried the following, all to no avail:
Type "killall Dock" in Terminal. Icons are the default set, but no indicator lights appear
Apple > Dock > Preferences > toggle "Turn on/off indicator lights" still nothing
System > Core Services > Dock and tried restoring from Time Machine....still no Dock indicators appear
User > Library > Preferences > TRASH com.apple.dock.plist....nothing changed
Change from 3D to 2D Dock, in the hopes that they might appear....no luck
To note, I've used DockMod prior to updating to 10.8.4, but now there are no lights to be found anywhere. Might this 3rd party app be the culprit? If so, how to do I restore my indicator lights to factory settings?
Please help....THANKS!

joelsolomon.com wrote:
To note, I've used DockMod prior to updating to 10.8.4, but now there are no lights to be found anywhere. Might this 3rd party app be the culprit?
Probably, since my Dock indicator lights were unaffected by the update.
To uninstall DockMod you will have to consult its documentation, if it exists. The problem with such third-party system hacks is that they rarely survive OS X updates and often cause unanticipated, seemingly unrelated problems. Never install something without knowing how to uninstall it.

Num Lock Off message upon opening lid

Hello,
I never use the num lock, yet when I open the lid and unlock the laptop by entering my password, the num-lock symbol is constantly on and remains on. Sometimes if I close the lid and open it again the symbol will go away, but this is a hassle. Any tips? Advise?

"I don' think you fully understand the issue"
I agree. Due to lack of accurate details in the original post.
Here's the current behaviour on my system:
1. Whiled logged in, in an Windows desktop session, default num lock state is off (no message nor symbol is displayed on the desktop).
2. Upon pressing Fn+ScrLk (NmLk), a "num lock on" symbol indicator is displayed on the lower right hand side of the display. The symbol remains visible for the duration of the "num lock" in the on state.
3. Upon pressing Fn+ScrLk (NmLk) again (while the "num lock on" symbol indicator is displayed on screen), the "num lock on" indicator is then replaced with a "num lock off" indicator". This indicator does not stay visible indefinitely, and will fade out and finally disappear after a few seconds of the action.
I don't get a "message"...

"Bump" noise with X-Fi Surround when switching on and off PC

I use an X-Fi Surround USB device, which is connected to large acti've speakers. Whenever I switch on or off my PC, even just standby mode, I get a loud "bump" noise on the speakers. The bump noise is independent from the volume setting and correlates exactly with the moment when the soundcard switches on or off (indicated by the blue LED).
Is this normal for an USB X-Fi soundcard?
Does anyone have an idea how to fix it's
Help is appreciated!
Alex

Q Are u using usb x-fi suround 5. with lastest driver?
Well i ve been use the lastest there are no animated volume control display at all, but u can still see it rotate at console.
But i never used again OEM driver include console, since the sound is harsh and distortion at DAW.
Nope i dont use as admin or not admin at xp. just use it as usual.
Goodlux

Caps Lock Indicator on Wireless Keyboard

I recently purchased and installed HP's wireless Keyboard and Mouse LV290AA. As this keyboard doesn't include lights indicating whey Caps Lock is on, is there any software or other way to indicate when the Caps Lock is on or off?

Hi,
I found this... actually, I knew I had it and it occurs to me that it may work for this application.
Like many HP packages, the information avavilable on the contents is sketchy. Neither do I have access to the code so I cannot glean the details. Nonetheless, it is a tiny program and it may work to restore your Caps Lock on/off indicator
HP On-Screen Display Utility sp55152 V1.30
Description:
This package provides the HP On-Screen Display Utility for the supported notebook models and operating systems. The HP On-Screen Display Utility enables the pop-up graphic displays that are shown on the screen when certain characteristics, such as volume or brightness, are changed.
If I find anything else... I will POST!
Good Luck!
              When you appreciate the effort…
       Please Click the Kudos Star on the Left to say "Thank You"!
    Is it Solved? Make it easier for other people to find the Answer:
       Please Mark my Post “Accept as Solution” to say "Yes!"
Remember: The more information you provide, the better help you can receive.
Always Include: (Notebook) Product Number , Printer – Model Number ,
                        Operating System and an Error Description
                             Never give out your Serial Number
                               2012 Year of the Dragon!
Kind Regards,
Dragon-Fur

Keyboard,trackpad and media bar inop at different times......

I have a HP Pavilion dv7-1264nr That originally came with Windows Vista basic/home...After a clean installation of WIndows Vista Ultimate, the trackpad (touch mouse) and media control (play, pause, mute, forward/back, stop, volume slider) and wireless on off, and "quickplay" touch buttons are inop...They aren't actual "buttons", they're touch buttons, similar to the trackpad. The keyboard is intermittantly inop, although a USB keyboard and mouse work perfectly, and the trackpad (mousing surface) and buttons are alos inop.
Before I get a lot of messages asking to check the connection ribbon, the NUMLOCK light is illuminated, the trackpad on/off indicator lights (and changes color from "white" to amber) and the media bar, near the display illuminates, and just recently, I got the wireless to connect, and the LED changes from blue to amber, and turns off the wireless network card.
Is there a "package" of drivers for the entire "system" that Microsoft doesn't have, and can't search for on-line, that I can download from HP? I assume HP has a driver for the entire "control panel" that Microsoft may view as separate pieces....
I've also noticed that the webcam in the top of the display is not recognized....Possibly another part of the "package" driver I'm lacking?

Has anyone find a fix for this? I've been using my Dragon Dictate headset on my MacBook Pro for about a year, and then today, when I plugged it in, I got this:
4/16/14 10:01:04.000 AM kernel[0]: USBF:    47.766    The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 1 of Hub at 0x4000000)
4/16/14 10:01:07.000 AM kernel[0]: USBF:    50.269    AppleUSBHubPort::FatalError - Port 1 of Hub at 0x4000000 reported error 0xe00002c7 while doing clearing port power feature
4/16/14 10:01:07.000 AM kernel[0]: USBF:    50.269    The IOUSBFamily was not able to enumerate a device.
Here is what I have tried so far:
Reset the PRAM
Reset SMC
Verify disk (there were no problems)
Repair permissions
Boot with an external USB hard drive (which works fine on the "problem" computer) that contained an old SuperDuper clone of my hard drive from several months ago. I received the same "The IOUSBFamily was not able to enumerate a device" error when I plug in the headset.
Tried to headset on another computer, and it worked fine.
Plug in an external USB keyboard into the problem computer, and it works fine.
All of this would lead me to conclude that it is a hardware problem. But it seems that if it were a hardware problem, the external USB keyboard and external USB hard drive would not work (which they do). If the problem were with the headset, it wouldn't work on another computer, but it does. So I'm wondering if it's some sort of firmware issue…??????? URG!!!!!!

On/off indicator?

Similar Messages

Maybe you are looking for