On/off ringtone and vibrate repeatedly turn themselves back on
Hello,
I've had this issue since I bought the tablet, which is otherwise fantastic: In the sound settings I've turned OFF the "tablet on/off ringtone" and the "vibrate on touch" settings (checkmark removed). The problem is, these settings turn themselves on again, seemingly radomly. I then have to manually removed the checkmarks again.
The ringtone is especially annoying as it bothers my wife and wakes the baby when turning the device on, thinking it will be silent.
I haven't found any mention of this except for this post.
Note: I sent back the first tablet due to this problem. The replacement does it exactly the same, however.
Tablet: Tablet 2-830F
Android 4.4.2
Kernel: 3.10.20-ga0784c9
Build: S000174:140822
Note: on the first one I performed two system updates to the next builds, but this didn't change anything.
Is this issue known and is it being addressed?
Thanks in advance
Very good; I have emailed Lenovo in United Kingdom and sent them a list of a dozen of issues, all I could gather on the last few pages on the forum that seemed important :-)
Similar Messages
-
Help! My iPhone 4 just turned off suddenly and I cannot turn it back on.
I had just gotten off the phone and everything was working fine, then my phone turned off suddenly and it will not turn back on. My iPhone 4 is up-to-date with the latest software update, and it should have still been charged. I have tried to hold the power button and the Home button, but nothing is happening... Help! I need my phone!
helooo....i have a iphone 4...suddenly phone turned off and wont turn on.....done with ur suggention but didnt work...please seggest me another way to turn on my phone...????
-
I turned off my phone and when I turned it back on, all my apps were deleted. I tried to reinstall my apps, but it wouldn't let me. My storage still remained the same even though, all my apps were deleted. How can I get my apps back?
Hold the home and power button down until your phone restarts. If that doesn't work, backup and restore using iTunes.
-
My iphone switched off and when I turn it back on it wants to connect to itunes
My iphone switched off and when I turn it back on it wants to connect to itunes
I was taing photo's and battery was half full - I switched it off and when I turned it on it says connect to itunes. I am not near my laptop?! What can I doThat is referred to recovery mode. At this point your only option is to restore to factory & then from a backup if you have one
-
i downloaded a movie on itunes and turned my computer off and when i turned it back on the movie wasnt there so i went to re download and it says check for available download and it still won't let me down load it. what do i do?
Hi runner_girl7585,
Thanks for using Apple Support Communities. If you weren't ever able to watch your rental movie, you can report this to the iTunes Store:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/ht1933
Cheers,
- Ari -
pleas help me out my iphone 5c is only a month old...i shut it off over night and went to turn it back on the next day and it wouldn't turn on or charge or anything.....
Plug it in to wall power. If it doesn't automatically come on within 15 minutes, try a Reset... press the home and sleep/lock buttons until you see the Apple logo. Takes about 5-15 secs of button holding and you won't lose any data or settings. You might need to hold the buttons for as long as a minute.
If it still doesn't turn on, you likely have a hardware problem. -
hi my iphone was fully charged and turned its self off, i have tried to turn it back on and reset it, but no luck so i have plugged it in to my pc and it displays the apple logo and then goes back off i have tried this a number of times with no success anyone got any idears?
Try here:
iOS: Not responding or does not turn on -
While erasing memories from iPhone 4, the phone gets switched off and can't turn on back
while erasing memories from iPhone 4, the phone gets switched off and can't turn on back. Please help.
What exactly do you mean by "erasing memories"?
-
When I updated my iPad it turned off and when i turned it back on it said connect to itunes and now i am conected to the itunes but what do i do
See; http://support.apple.com/kb/HT1808
-
I powered my iPad off and when I turned it back on it is telling me to reconfigure it. So I select English then United States then I selected my WiFi then message comes up that says your iPad could not be activated because the activation server cannot be reached. Try connecting your iPad to iTunes to activate it, or try again in a couple of minutes. Have tried several times and it is still not working. Nothing will show on screen on icons nothing.
Try to Update your iPad to iOS 6.1.4 when connected to iTunes via USB too.. You do not need to touch anything on your iPad to update your iPad either..
-
Airport turns off by itself and won't turn on back again!!!
hey there, i am currently facing an issue with the airport as by it is turnning off by itself and i cant turn it back on .. i have to restart !!!
sometimes when i turn on my mac like just now happened it is off and can;t be turned on.
please if anyone can help i would really appreciate it
thank you very muchHey, in case you haven't been able to find a solution to your original problem with airport turning off, i seem to have found the solution for my MacBook Pro. I called Apple Care and they had me to shut down my computer. Then, while holding down the four keys: command, option, R and P, push the power button to turn on the computer. Do not let up on the four keys until the start up chime has sounded twice. Then let up on the four keys and the OS will boot up as usual. They said what that does is reset your "sleep" parameters on your computer. This seemed to have solved my problem.
-
I have been working on an iMovie project. I turned off my computer and when I turned it back on to continue working and entire section of about 80 photos was gone. The music attached to these photos remains. Can I retrieve this work?
I am at Snow Leopard and have only played a bit in IMOVIE - so can't speak for Mavericks - but -
In general as I work a lot in Photoshop - when you are happy with something save it and continue on - If you have Time Machine Running and you want to try things next that may or may not work - force a time machine backup - that way the version you are happy with will be available for 24 hours (and wish this was a setting one could extend)
If you turn off your mac - or end a program without consciously saving something you may lose what you worked on.
If IMOVIE did not ask if you want to recover what you were doing your update may be gone - but try posting new question - asking about automatic backups in IMOVIE and how they work. -
i dropped my macbook pro off my couch and when it landed it was shut, i opened it and it was on a grey sceen so i shut it down with the button and when i turned it back on it was kind of slow but not so much anymore. i quit all of my applications before i shut down and i noticed that when there are no more things t quit and i click "hide finder" its not grey anymore it still gives me the option to hide it when i dont need to, little things bug me and i just got this laptop, i just want to know if i should be worried
I suggest you immediately make a backup of your data. You don't know if or when the computer will show some symptoms from the drop. You may want to, for piece of mind, take the computer to an authorised service center for assessment. No one here can assess any internal damage you may have done.
-
Iphone 4 turns off randomly and won't turn back on unless it's plugged in
Iphone 4 turns off randomly and won't turn back on unless it's plugged in.
Has anyone had this problem?
If I leave the phone (thus not doing anything to it) for an extended period of time say 2 hrs. It will have turned off and you can't turn it back on unless you plug it in, but it's got heaps of "Battery" left.
Ever so often it will turn off randomly as well, and can't turn it on again.If your iPhone is powering off, this is not normal.
Try restoring your iPhone with iTunes as a new iPhone or not from your iPhone's backup. If no change after doing so, your iPhone has a hardware problem. The iPhone includes a one year warranty. -
Can anyone help me how to make my iphone 4 work I turned it off and now I turned it back on and it does not work it only shows the APPLE icon on the screen it has being like that for past 9 hours.... HELP PLEASE
Connect iPhone to Wall Charger and Reset, hold both Home and Power buttons until the iPhone begins to restart itself. Usually takes less than 15 seconds of holding both buttons.
If you decide your iPhone is not working properly, and you decide to Restore your iPhone Firmware then do this. Open iTunes on computer, then connect iPhone to computer, then hold both Home and Power buttons until iTunes recognizes iPhone in Recovery Mode. This usually takes about 20 seconds of holding both buttons. Restore the iPhone Firmware.
Maybe you are looking for
-
The parent lock file that the support page tells me to delete isn't there TO delete unless I actually open the Firefox Browser....then of course it won't actually let me delete the parent lock file as it's "running in another window" EVEN AFTER I clo
-
InCopy Layout Mode not displaying correctly.
I have a layout that I (designer) have created in InDesign. I have created the assignments and packaged for InCopy, but when the editor gets the InCopy file the "Layout" view displays the layout incorrectly which throws off the text for the entire do
-
When you sync your phone, what info is in the "documents and data" ?
I have 5MGB of "documents and data" and can't figure out what's contained in that so I can clean it up.
-
Unexpected & Unnecessary Popup "do you want to save changes to 'x' before closing ?"
Hi Im running a code that is opening a pdf doc and reading some stuff from it (not editing it). avDoc = CreateObject("AcroExch.AVDoc") avDoc.Open(FileBox.FileName, "x") accroApp = CreateObject("AcroExch.App") accroApp.Show() accroApp.Hide() accroApp.
-
Title 3D opens but no templates on it.
I just Reinstalled FCP 4.5 HD.Now I'm having problem with 3D title. Style palette not showing the different templates anymore. ny suggestions to solve this issue? Thanks in advance. Juan