ON/Off Use
My question is two fold. 1- Does turning the printer on/off use ink? 2- If I leave the printer on overnight I can't get it in the ready mode, I have to unplug and then plug it back in to get it working again.
This question was solved.
View Solution.
Hi,
Generaly turning the printer off an on may use some more ink on most printers due to initialization proccess within the printer startup, therefore the printer use Energy Save to keep it power usage minimal.
Please clarify your printer model.
How is it connected to your PC, through a USB, through a wired network or wirelessly?
Is the printer power directly connected to a wall outlet or may through any power split, surge protector, etc.?
If it is not directly conencted try connecting it to a seperate wall outlet and check if that may help.
Looking forward to hear back from you,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution
Similar Messages
-
My iphone 4s' screen is black, but it's still on and charging. I broke my lock screen button so I am unable to turn it off using the home button and lock button. Is there any other way my phone can restart or turn off ? Is my phone broken for sure?
Kbkohn wrote:
I am in tears right now because I entered all my 11month old sons milestones into my phone and now I have nothing I'm so upset and am hoping there is a way to get this information back.
Most intelligent people would not store such sensitive data on a device that could so easily be lost, stolen, or damaged. Even if they chose to do so, they would use the device as designed and regularly sync and backup that device as described in the User's Guide.
Have you done so? If you have, all of the data is either in iCloud or iTunes on your computer. Replace the device and restore the new iDevice with the backup of the old one. -
why does the iPod on my iPhone 5 stop playing for no reason? Also, I tried to shut it off using the ear phone piece but it wouldn't shut it off.
Thanks anyone for help.Since you can't switch it off.
Put it in a dry place for a week (a rice box is a good idea) and try to use a hair air-blower (warm but not hot) to dry it. -
In Switch Executive am I better off using manual or execution
If I close a relay using Switch Exec ( IVI Switch) in Test Stand 4.0, take a measurement then open that relay am I better off using manual or execution for the "life" of the step?
I want to make sure the switch is open after the open relay step is executed.Hi Clint,
2nd Question: Exclusions
For mutual exclusions, you create a list of channels that should never connect to one another.
For set exclusions, you create two lists of channels. Channels from the first list should never connect to channels of the second list. For example, a set exclusion can be used to separate a high-power DC and RF signal.
In reference to the 2 to 4 relays: if they were closed at the same time, would the result be a connection between channels? If so, then you want to create an Exclusion of type Mutual and add these channels to the list.
1st Question: Aliases
The easy answer to the copy/paste question is to use the integrated Excel import/export feature. You can export your Virtual Device to file and open it in Microsoft Excel. From there, you can edit your configuration and copy the necessary aliases from one Route Group to a new one (using Excel's simple text editing features and/or advanced formulas). When you are satisfied with your changes, you can import your configuration back to a new or existing Virtual Device.
However, I believe the whole purpose of copying aliases between Route Groups was to create exclusions for one Route Group, but not the other. This is not possible. Exclusions can be created for the Virtual Device, and this exclusion then applies for all the Route Groups in that Virtual Device.
If you want one Route Group that obeys an exclusion, and a second Route Group that ignores the same exclusion, then one way to do this would be to create two individual Virtual Devices; the first Virtual Device configured with exclusions, the second not.
By the way, you can do this using the aforementioned Excel import/export feature.
Hope this helps. Let me know if you have further questions!
Chad Erickson
Switch Product Support Engineer
NI - USA -
Apple iPAD 2. Needs password to unlock iPAD; however there is a permanent keyboard displayed on the screen that does not respond to touch. iPAD switches on with button but does not turn off using it at moment. Can you help please?
Try a reboot by holding both the power and home buttons until the apple logo appears, ignore the red slider if that appears. See if that clears the glitch.
-
MacBook Pro (Early 2008) Shuts off using Battery Power
Just last night my computer just shut off using the battery power. It was charged at 84%. This morning I checked out what the problem could be. A few discussion boards said the battery could be the issue. These are the battery specs.
Model Information:
Serial Number: SMP-ASMB014-38c5-b97
Manufacturer: SMP
Device name: ASMB014
Pack Lot Code: 0002
PCB Lot Code: 0000
Firmware Version: 0110
Hardware Revision: 0500
Cell Revision: 0102
Charge Information:
Charge remaining (mAh): 3731
Fully charged: No
Charging: Yes
Full charge capacity (mAh): 3731
Health Information:
Cycle count: 114
Condition: Check Battery
Battery Installed: Yes
Amperage (mA): 350
Voltage (mV): 12611
I bought this MacBook back in June of 2008 and have never had ANY problems. The health condition says to Check Battery and I've reset the SMC, PRAM, and NVRAM. When the computer runs on battery it last until about 80-84% of the battery life and just turns off. I press the power button and the gray screen appears and it clicks off again. I have to be plugged into the AC and I cannot calibrate my battery since it won't stay on past 80%.
The main reason I'm posting this board is to figure out if this is actually my battery but also that when I tried to call Apple I was asked to purchase an AppleCare plan. I just wanted to talk to someone to make sure it was my battery.
Thanks for your help in advance!So maybe I'll let it run on battery till it dies... plug in the AC and let it turn on, unplug and see how much more it lasts and so on?
-
My lock button doesn't work. I turned my phone off using touch assist - but now I cant turn it on. Is there a way to turn my phone on when the lock button doesnt work?
you can call it
-
hello out there... my superdrive always seems to be "off" using it requires rebooting the mini, and luck
Hello, I assume this is an external drive?
If so, does unplugging it and or plugging it into a different USB port bring it back? -
my iphone 4 lock button does not work, i turned it off using assesive touch, now it wont turn back on? got any tips for fixing this problem!
Hi, braidenwhitesidemate.
Thank you for visiting Apple Support Communities.
I would recommend going through the steps in the article below. If the issue persists, see the section labeled Issue not resolved.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Cheers,
Jason H. -
IPod will not turn off using click wheel
My 30G iPod won't turn off unless I put it in the universal dock and use the remote. It will not turn off using the click wheel. I've tried resetting the iPod, and also changed the "Settings" back to the factory default, and that didn't make any difference. Is anyone else having this problem?
Welcome to Apple Discussions!
Does the iPod sucessfully reset?
Try resetting the iPod...
Resetting iPod
After it resets, wait about a minute. Now try turning it off.
Also, try activating the sleep timer on the iPod. Does that turn it off? (Go to extras-->clock-->[select a clock]-->sleep)
btabz -
My Ipad mini has frozen leaving Candy crush. I tried to put it off using the on/off button, now the screen is black with no function. I can hear Siri if I push the control. It is charged. Any ideas? I can't read the very small printed serial number on the back so can't use the Apple help as they require the serial number.
Hold down the sleep/wake button and the home button for ~10 seconds, or until the apple logo appears. This is called a reset.
HTH -
My iPhone 4 keeps freezing up. I have turned it off, used the off switch n home button to try to restart it. It slowly comes on I type in my pass code which takes awhile to come up n it does do anything. I can't get in to any app.
try to back up and restore to factory settings
iTunes: Backing up, updating, and restoring iOS software -
my phone froze so i switched it off using the power button and home. now everytime it switches on, it wont go past the apple screen??
Hello 3m4nz4,
After reviewing your post, I have located an article that can help with your device. It contains a number of troubleshooting steps and helpful advice for the issue you are experiencing:
iOS: Not responding or does not turn on - Apple Support
Your iPhone, iPad, or iPod touch may occasionally stop responding to buttons, switches, or touchscreen input and may exhibit one or more of these symptoms:
Does not return to the Home screen after you press the Home button
Does not wake from sleep after you press the Sleep/Wake button
Does not turn on (or power on) when you press any button
Does not start up past Apple logo
Appears frozen or unresponsive
Is unable to "Slide to Unlock" or "Slide to Power Off"
To troubleshoot these symptoms:
If a single application is not responding or stops responding when it opens, you can force it to close.
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on), reset your device.
If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
Let it charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD -
As per title. Twice in a few hours. Happened each time when my BT router defaulted to plain public wi-fi and while I waited for airport to locate my router hub I just ticked my hub and boom this dark almost black see through screen slid down and instructed me to switch off using power button. It is a 3 year old desktop 21" and has been faultless until this. I get the default report an unexpected shutdown form and when I fire up it is fine as indeed it is now.
Any help or ideas how to deal with?That is a kernel panic.
What is a Kernel Panic?
http://support.apple.com/kb/TS3742
and http://support.apple.com/kb/TS1892?viewlocale=en_US
http://developer.apple.com/mac/library/technotes/tn2002/tn2063.html
More details here:
http://www.thexlab.com/faqs/kernelpanics.html
Useful articles on how to avoid and eliminate kernel panics here:
http://reviews.cnet.com/8301-13727_7-10344626-263.html?tag=mfiredir
http://www.macworld.com/article/2027201/how-to-troubleshoot-a-kernel-panic.html# tk.nl_mwhelp -
Recently updated the the apple tv remote app for my iPhone4. Now can no longer turn on the apple tv "box" on/off using iPhone app as I used to do before the update. Only thing that shows on iPhone screen is music library. Home Sharing is on. Any help appreciated. Sorry if this is not exactly the right place to post this!
One clue: I have found a reliable way to solve the problem when it happens.
In my network, I have the main Airport Extreme (Gen 1) which is connected to my router, which distributes IP addresses to my internal subnet. The other two AEs (one Gen 4, one Gen 5) are set to extend the network.
When I get this problem with an AppleTV 2 that can "see" my library, but when I try to open it, it says it couldn't find the library, it seems to have to do with a change in which Airport Extreme it's talking to.
If I restart the main Airport Extreme from the Airport Utility, effectively restarting the entire wireless network, then when the network resumes, every AppleTV 2 is happy again.
Unfortuntely, the problem does seem to recur - but I'm wondering if it's because temporary interference leads an AppleTV 2 to try to connect to a different AE, and somehow that's mucking with the Home Sharing. Remember, internet access (Trailers, Store, Netflix) have no issues. Purely Home Sharing.
Adam
Maybe you are looking for
-
How to switch off internal macbook screen when using external monitor(s)
as far as i observed, adding external displays ( running different screens on them, not mirroring) to a macbook pro increases the gpu workload and with that comes temperature rise in the laptop and increase in ventilator noise - and probably increa
-
Images printing from D4s are bad...same calibration D3 is perfect...
I have an epson 3800 printer and have calibrated both printer and monitor then tried to print images shot at a graduation on my Nikon D4S. The print quality is awful, skin tones too dark and images looking nothing like what I see on my screen. I th
-
APPLICATION TOP Character set conversion
Hi, I am changing the characterset of application from UTF8 to AR8MSWIN1256. After running adadmin, i am getting the following errors in manifest_lossy.lst file Source Character Set: UTF8 Destination Character Set: AR8MSWIN1256 Original Source Buffer
-
I have accidentally deleted my voice memo when i pressed the 'delete' button, thinking that is to change the name of my voice memo. is there a way to retrieve the memo back? really do not understand why apple provides just one confusing delete button
-
Have 1 POP3 email account I want to work like IMAP email in icloud (keeps my iMac, iPhone, ipad mail in sync). Apple suggested trying creating a new Apple ID just for that POP3 email. Has anyone tried this to see if it works and will delete/update ac