On Page Slider of Embedded Videos

I wanted to make a single page that stayed the same but in the middle had a video embedded but I wanted to add left and right arrows to slide between embedded videos on that page. This would allow my homepage to have all the videos cleanly accessible without reloading the entire page just sliding between. Is this possible? Could I create a page that's long and has all the videos then embed that page onto the main page? How's this possible? Thank you!

Hi
You can try compositions , where insert the video in target and use triggers as thumbnails for more videos . User can click on the triggers to change the video.
Also you can use next and previous buttons which would change the target on selection.
Thanks,
Sanjit

Similar Messages

Firefox for Android crashes on all three of my Sony Xperia V's (LT25i), usually when a page contains one or more embedded videos or Flash animations.

I have three Sony Xperia V (LT25i) phones, all of which are running the latest Android firmware version (for that model (9.2.A.2.5) to date. Since I had been using Firefox since 2007, I tried numerous times to run Firefox on all three with limited success. The browser crashes whenever I load a page that had embedded videos or any other form of animation. The issue was so frustrating that it caused me to stop using Firefox altogether and switch to Chrome, which is in no way nearly as sophisticated, streamlined and feature-rich as my formerly-beloved Firefox - a situation which I would very much like to reverse. Thanks.

Oh, there are too many to list - basically any page that's even slightly heavy-handed with videos and/or animation.
For the record, I managed to ''somewhat'' alleviate the issue by uninstalling Adblock Plus, but I haven't yet done enough testing to verify that Adblock Plus ''actually was'' the root cause of the problem. However, that didn't solve the issue of the text on any page flickering at five-second intervals, which makes reading longer articles a very annoying and unpleasant experience.
Shady

Show image at certain points during embedded video?

Hi all,
Just before deployment, we have had a change request :-)
I have slides with embedded videos, and these videos pause the slide until the video ends, the moves onto the next slide. During the videos, we want certain images to appear in the slide, so, for example after 2:20 we would like an image to appear in a box in the slide itself. Clearly I cant use the function of "appear after specific time", as the slide itlsef is only a few seconds long, but the video inside is over 5 minutes. I have played around with an advanced action using cpInfoElapsedTimeMS, but this displays the entire projects timeline and not the individual slides embedded movie time. Is it possible to access the time in which the embedded video has been playing and hence make an image visible based upon that?
I am using Captivate 5
Thanks,
Tristan

Hi Tristan,
You can do this in Captivate 5.
You need to insert the video this way: Video > Insert Slide Video. Then you get the option to increase this slide duration to match that of video or even distribute this video on multiple slides (if the video is longer than your current slide). In either case, the total duration of slide(s) and video will match here. Captivate will also ensue that now this video plays synchronous with your slide (s). Something like, 10th sec of video will match the 10th sec of slide always if you start the video from the slide beginning.
Once you reach this stage you can use "appear after specific time" to adjust your images and now these will match your video.
These documents will help you further:
Adobe Captivate 5 * Using slide video
ABC of Rapid Elearning - Multi-video support and synchronization | Adobe TV
Regards,
Sony

Pause and play timeline with embedded video

I have created a banner that is currently being used at www.bandg.co.uk
I have been asked if it is possible to add a video to this banner.
However, the problem I have is with the banner having mlutiple slides.
What I am looking for is a way of having the timeline pause when the video is clicked on, then for the timeline to continue when the video is paused (basically making the video a start and stop command button).
Thanks for your help.

Can anyone help with this??:
I have created a Keynote presentation for a trade show consisting of slides and some slides with embedded video. How can I set this to play without cutting the video short or stopping at the end of the video?

Embedding video in a web page

One of my looming projects is to redo part of my own little
DVD site, particularly the page with the demos :
existing page
ie by embedding the video, so you can just click play etc as
on you tube etc, ie something more like this example :
video example
It's probably pretty painless, but not sure where to start -
plus there are probably countless different options, so if anyone
could point me in the direction of putting up something like the
example above, that would be great.
Cheers.

I haven't had a chance to look at this yet, but assuming it
is using Flash, I had a google, and found stuff like this :
how
to...
Or, in fact this -
Flash
Video Player

Controlling embedded video display size on a page

Is there any way to up the size of the embedded video size on a wiki page?

hello, you could try to enable click-to-play functionality for plugins - then the plugin content won't be active until you enable it on each page.
enter '''about:config''' into the firefox location bar (confirm the info message in case it shows up) & search for the preference named '''plugins.click_to_play'''. double-click it and change its value to '''true'''.

Delay in playing embedded video on page load – DPS

Hi
I've created some DPS pages with embedded video content that plays on page load but there is a slight delay causing the page below to be exposed which in turn creates a jump between the underlying page and the loading video.
The video should load, play then disappear revealing the native InDesign page which also is a crisp version of the last frame of the video that has ended.
I don't use a poster image because it renders at a low resolution and is not as crisp as the vector based text below in the native InDesign page.
The page below is what is shown once the video has finished and closed down.
This delay causes a glitch which ruins the fluidity of an otherwise nice looking page.
I'm trying to re-create something along the same lines as the "Martha Stewart Living magazine" video front cover which is seamless and very slick.
Do you know how I can achieve this without the slow loading vid and help make the effect smoother.
Thank you in advance, I look forward to your reply.

From your description it sounds like you are trying to trigger auto-play using Media panel. For DPS you need to set the behaviour in the Folio Overlays panel. Click on the video, open the Folio Overlay panel, and check the Auto-play setting. If you are doing this as a cover you probably also want to enable "do not allow pause".
Neil

Control slide advance via video cue points

Hi Folks I would like to have a video clip control the advance of an external slideshow by using cue points set in the video. Idealy I would have 2 swfs (video.swf and slides.swf) embeded in a web page side by side and as the video reaches a certain cuepoints it advances the slides in the slideshow swf. It would also be good to fullscreen either one or the other as required.
Any help appreciated.
Dave.

Hi Folks I would like to have a video clip control the advance of an external slideshow by using cue points set in the video.
The videos do not need to be live streamed and can be prepared with keyframes at the key positions for slide advance
So is it keyframes or cuepoints? I didn`t say sth. of Livestream either.
Streaming means simply the process where a video can already start even if its not already completely loaded. This is consideres not only good but standard practice nowadays.
Embedding videos on the timeline is a bad idea. Using Keyframes in this case is an even worse idea.

Embedded videos in many websites won't open.

I have found that the embedded videos on many but not all websites won't open now when I'm browsing in Firefox. I am running 27.0.1. I have Adobe Flash Player installed so that's not an issue. As some examples of non-openers: Embedded videos in some of the news articles on Yahoo!'s home page; videos on the davidlynchfoundation.org site. I tried disabling the "Adblock Edge" add-on, but it didn't change anything. In many cases, their is a big empty space in the text where the video should be, i.e. there isn't any indication that there's a video there. In other cases, I click on the visible start icon, but the screen of the vid just goes to black.
When I switched to Safari, all of these embedded videos opened without a hitch. I'd rather continue with Firefox, but will have to switch to Safari if we can come up with a "fix" for this problem.
I have a MacBook running Snow Leopard. This is a new problem which I haven't experienced with Firefox previously.
BTW: I have only minimal tech skills.
Thanks for any advice/help you can provide.
Dave

Hi Yogidave,
It sounds like the videos are not loading properly. If there are not video controls, but there is a space for the video, this means that the item is loading, but the player is not loading.
In understanding what you tried:
I tried disabling the "Adblock Edge" add-on - it looks like this is no longer in the list of add ons that you have in the troubleshooting information, when you took this out, do the videos still leave space in the page where the video should be?
The examples you used: Yahoo homepage and the davidlynchfoundation: I know the latter uses an embedded youtube video with has its own video player that uses flash, as well at Yahoo. (I am not sure if all the videos are flash in Yahoo)
Since this is the case, can you please check your extensions to see if you have Flash installed or if you have it disabled? If so, please turn it on and visit the sites that are giving you issues to see if this resolves the problem.
This article has pretty simple instructions how to install the player if it is not there[[Install the Flash plugin to view videos, animations and games]]
The only other test I can suggest is to see if another type of embedded video does the same thing. For example, if you have netflix or hulu, see if those video players do the same thing.
I hope this helps. (also I tested those pages in beta and it loads just fine, you are not short of watching videos again in firefox)

How do I make a thumbnail that has a gallery inside? And how can I make this gallery have embeded videos from vimeo + Images?

Hello,
I'm pretty new to Muse so I don't know a lot about it, but I researched a lot and didn't find an answer to this question.
I'm trying to make a portfolio website. The website will be a 12 thumbnails. But each thumbnail is one project, not an image.
When you click one of the thumbnails, I want it to be a lightbox that will show embeded videos from vimeo mixed with images.
Ex: A coca-cola projet.
Main page has a thumbnail of a coca cola image. When you click on it, it opens a lightbox with a coca-cola film, when i click to the right arrow, it shows a cocacola poster, then another poster, then another video. (but they are all part of this gallery, that is inside the thumbnail.
Can you guys help me?
Thanks!!!

I don't understand why my thumbnails don't work.
I dragged a composition lightbox inside another one. But I still have the first lightbox there and can't delete.
When I try my wabsite i see this:
But then I click the thumbnail and I see this:
And when I click one of those 3 I see this:
Like it is making a double lightbox.
but it doesn't show the images, it's like the first lightbox is on top of the second one.
How I deal with this? =/

I can no longer play embedded videos on the BBC and Sky websites, how can I get them to play?.

When I try and run the embedded videos I getthe message that they cannot play and to try later. The error message was:
EMP v.3.0.0.r555290_554055
Playlist URL : http://playlists.bbc.co.uk/news/entertainment-arts-15192676A/playlist.sxml
Error code : CDNRedundancyManagerError [0] :
null
I am using FF 7.0.1 on Windows 7 sp1 and the Flash version is 11.0.1.152. I have checked Firewall settings and they are ok.
Thanks for any help.

Try clearing the Cache in Firefox.
Tools-> Clear Recent History -> [v] Cache
or
Tools->Options->Advanced->Network -> Offline storage -> [Clear Now]
Youtube may have made some changes recently. Clear the Youtube cookie and refresh page if above does not do it.

How do I get an embedded video in Keynote on my ipad to play when i transfer it to a pc powerpoint

Hi Everyone,
I need help I have made a keynote presentation on my ipad with an embedded video in it. I transfered it to a pc as a powerpoint and all the slides worked except the video it just was a black slide. Can you transfer it so that it will work? Do you have to embed the video in a special way.
Thanks for the help

iTunes on the iPad is a link to the store only.
It is used to buy media.
To listen to music or audio(podcasts, audiobooks) go to the music app.
For movies, tv shows or music videos you use the videos app.

Embedded video in PDF shows blank

Hi,
I am using Acrobat 9 Pro. I have a PDF and a .mp4 video on a web-server. The mp4 is about 26 Mb in size. If I open the video on the browser (IE) it works.
However when I embed this video in my PDF using a 'Video tool' it plays only the audio and does not show the video. I read somewhere about the file name length. the file name is ps1.mp4.
Can someone please help resolving this.
Thanks in adavance.

Does this only affect one video, or every PDF you open with embedded video content?
If the latter it is probably an issue with your video card. First, I'd try disabling hardware acceleration in Acrobat's preferences > page display, and switching to software mode on preferences > 3D and multimedia > preferred renderer.

Embedded Video Plays on PCs but Not Macs

As the King of Siam declared, "It's a puzzlement."
I'm updating a site and have embedded a .mov from the client's YouTube channel using YouTube's preferred <iframe> code. Here is the URL: http://www.realcosmetics.com/ourStory.html.
The video will play in all of the browsers on my Win7 PC (latest Firefox, Safari, Chrome, Opera, and IE which also emulates IE7 & IE8). It will also play on the PCs of friends I've asked to test. It will not play from the page on any Macs where we've tested. [FYI, the .mov file was edited on a Mac and plays there.]
It will play on the Macs, however, from the YouTube channel. And the guy who is building the Facebook page embedded the same video on a tab using the old YouTube <object><embed> code. The test Macs have no problem playing the video from the FB page.
So, I tried switching to the old <object><embed>. Still doesn't play on the Macs, so I restored the iframe code.
What is totally confusing is that I recently embedded videos from YouTube into another site using YouTube's <iframe> code, and the client can play those on the Macs. Both pages use the same DOCTYPE (XHTML 1.0 Transitional) and code copied from YouTube. The page validates (after I removed the allowfullscreen switch which W3C said wasn't valid under the DOCTYPE).
I've searched online through forums and discussion threads for solutions, and while I found several that seemed to work for one person but not another (having to do with changing Mac preferences, etc.), none of those solutions worked on the test Macs.
Any ideas from you wonderful gurus? The answer may be staring me in the face but can't see it for having stared at it for so long. The only difference between this application and the previous one that I can think of is that the host servers are not the same company.
Thanks for pondering this!
Chris

Adninjastrator,
My advice was on the back of testing in Firebug - it was there I saw the .text div overlapping the Video. The video will become 'active' if I remove the float from #rcsVideo, however there are other floats and positioning that aren't helping anything.
To clarify, I can't get the play button to change when I hover over it (and I can't click it to play it) until I disable the float on #rcsVideo. Bizarre but that's what happens - in both FF and Chrome. No idea why this works in Windows machines without disabling the float. As you can see in the images attached, .text highlights the entire video area. Then, by disabling float:left on #rcsVideo, the text area is not covering the video.
The video itself is direct from youtube and has a flash fallback as well as many other kinds of fallback for all machines. As such, this displays in my iPad.

Embedding video in an embeded SWF

Hello people. I'm building a site with a flip book component.
The book is a movie and then I load the pages via an XML file. The
pages are SWF files. You can see the book at
http://www.thiez.com/evf/main.htm
Now, If I add a video on a particular page by embedding it in
the flash movie, I will be able to see it when I test that
particular page, but it wont show when I test the whole book. So
basically, my problem is: the video shows ok in the file where it
is embedded but not in the main SWF file that calls the SWF file
containing the video. Any idea will be appreciated.
Dani Szwarc
Thiez Multimedia
www.thiez.com

there sure are a lot of angry peeps on this forum lately.
Hard to tell exactly what you are doing -
allow me to quote you:
"I am importing Mpeg2 into an embeded video in SWF and play
timeline"
not exactly sure what that means - are you importing an mpeg
into flash to the timeline?
you cant import into an embeded video - that sounds like you
already have a video file in your FLA
and are trying to import another video "into" it - cant be
true and must be a typo.
Make it easier for us to help you by explaining in detail
what you are doing.
Also - this is a volunteer based peer to peer forum - it is
not official adobe support - you need to
contact them directly if the issue can not be solved here.
Chris Georgenes
Animator
http://www.mudbubble.com
http://www.keyframer.com
Adobe Community Expert
*\^^/*
(OO)
<---->
RichKrose wrote:
> It is obvious to me that developer do NOT look at these
forums? A crash is
> ridiculous and I find NO help from Adobe. How simple can
this be? Importing
> Mpeg1 or 2 into Flash (only 7M) as a progressive
download. I cannot believe it
> is a codec problem. Is there anyone at Adobe with a
conscious that is willing
> to help? I spent 800$ for this package? I must be crazy.
>

On Page Slider of Embedded Videos

Similar Messages

Maybe you are looking for