On powering up I got a message date and time were changed to before 2008. Why would this happen?

I used the computer this morning to check email.  Shut it down and powered back up this afternoon and a box appeared telling me the date and time were set for before 2008 (actually for 12/31/2000) and needed to be reset.  Why would this happen?

No, it had 3:30 hours left.  I make it a point of not letting it drain.  I haven't had a problem since then, so I'm hoping all is ok.  Thanks

Similar Messages

  • TS4268 My iMessage doesn't work on my iPad. My software is up to date, wifi is working, apple ID is working but the verification stops and goes back to sign on. Why does this happen?

    My iMessage doesn't work on my iPad. My software is up to date, wifi is working, apple ID is working but the verification stops and goes back to sign on. Why does this happen?

    Look at no. 5 in this text which was copied from Apple's support site for troubleshooting Messages and FaceTime activation.
    Troubleshooting Apple ID activation
    After each step, toggle iMessage and FaceTime off and then on again in Settings > Messages and Settings > FaceTime.
    Update to the latest version of iOS.
    Ensure that you have an active Internet connection. You can complete activation using Wi-Fi or a cellular data connection. Check your Wi-Fi network using standard Wi-Fi network troubleshooting.
    If you receive an error when signing in to your Apple ID, visit myinfo.apple.com, sign in to your account, and ensure that the primary email address has been verified.
    Ensure that FaceTime has not been restricted: Settings > General > Restrictions > FaceTime.
    In Settings > General > Date & Time, ensure that Set Automatically is on. If Set Automatically is on, but the incorrect time zone is displayed, turn Set Automatically off and then choose the correct time zone, date, and time. Then turn Set Automatically on again.
    Enable iMessage and FaceTime while connected to another Wi-Fi network in a different location.
    This is the support kb article.
    http://support.apple.com/kb/ts4268

  • Aperture was not able to adjust the date and time of the master file "2008-06-22 at 14-41-14.jpg" because it has a format that does not permit date modification.

    I can't seem to find a way to update the date/time of a master file. There is a format issue but I can't seem to figure out how to correct it.
    Aperture was not able to adjust the date and time of the master file “2008-06-22 at 14-41-14.jpg” because it has a format that does not permit date modification.

    Can you post an ipconfig /all from the server and the DC?
    Robert Pearman SBS MVP
    itauthority.co.uk |
    Title(Required)
    Facebook |
    Twitter |
    Linked in |
    Google+

  • I bought my i pod touch from us but i live in india .i have been using this from many days fr just a few days before something went wrong with it and the date and time has changed what do i do?

    i bought my i pod touch from us but i live in india .i have been using this from many days fr just a few days before something went wrong with it and the date and time has changed what do i do?

    Have you went to Settings>General Time&Date and correct the time.  Make sure the time zone is correct too.  Also go to Settings>General>Inernational and make sure the Gergorian calender is selected.

  • I am having problems sending messages.. Once I send it, it just beeps and says it failed to send and I have perfectly good service. Why is this happening??

    I am having problems sending messages.. Once I send it, it just beeps and says it failed to send and I have perfectly good service. Why is this happening??

        Hello llm007!
    That is quite a strange issue. What make & model phone do you have? When did this begin? Are you able to make & receive calls? You can troubleshoot this issue http://vz.to/12TLCsR on our website to get things working as quickly as possible.
    Thank you,
    MichelleH_VZW
    Follow us on Twitter @VZWSupport

  • My computer will not let me type my password or move the mouse even though the date and time are changing and it's making a spinning noise what do I do??

    My computer will not let me type in my password or move the mouse but the date and time are changing and there is a spinning noise what do I do!!???

    Meredith199,
    does your MacBook Pro have an Eject key (⏏) in the top-right corner of the keyboard? If so, does pressing Control-⏏ show a restart/sleep/shutdown dialog box?
    If you press Shift-⌘Q, does your MacBook Pro recognize that as an attempt to log out?

  • HT3180 setting date and time - my apple tv get stuck and says it needs to set the network date and time.  Does anyone know how to do this?

    My apple tv gets stuck and says it need to set the date and time on the network.  Does anyone know how to do this?

    I was able to get my Apple TV working again by downgrading the firmware following the instructions in this message:
    https://discussions.apple.com/message/20008613#20008613
    In case that message disappears, here's my translation:
    1. Connect your Apple TV to your computer via USB. Don't plug in the power cable.
    2. Download the older 5.0.2 firmware from Apple here:
    5.0.2 (Apple TV 2): AppleTV2,1_5.0.2_9B830_Restore.ipsw
    5.0.2 (Apple TV 3): AppleTV3,1_5.0.2_9B830_Restore.ipsw
    3. Open iTunes and select the Apple TV. Hold down the option key and press the restore button at the same time.
    4. In the dialog that opens select the firmware that you downloaded.
    5. The restore process will take a few minutes. Once it's done plug your Apple TV back into your TV. If the date and time message persists just press the menu button to skip it. This got mine working again.

  • Date and Time formats change in transfer rules

    Hello Experts,
    Could someone please help me to fix the following issue with DATE AND TIME format.
    I have two info objects zdate with data type DATS (length 8) and ztime with data types TIMS (length 6).
    The data in the data source (alalertdb table) is in the format of date dd.mm.yyyy and time in hh:mm:ss.
    Now when i am trying to extract the data, the load is failing because the system is taking dd.mm.yyyy length as 10 and hh:mm:ss length as 8. My infoobject
    only alows 8 for date and 6 for time.
    Do I need to write any routines in the transfer rules? If yes please share the code.
    All the inputs are much appreciated.
    Thanks in advance.
    Regards,
    Harish

    Hello ALL,
    Thanks for your inputs.
    Adios, I will try your routine if I am not tru with the formula. Thank you very much for your reply.
    Bjorn, Your formula sounds quite simple. can you please eloberate the information.
    When I used the formula for the date field its giving me an error with message FORMULA ELEMENT IS NOT ALLOWED HERE.
    Formula I used is:
    LEFT( 2, < /BIC/ZOOH_DATE> ) & SUBSTRING( < /BIC/ZOOH_DATE>, 3, 2 ) & RIGHT( 4, < /BIC/ZOOH_DATE> )
    can you also please let me know what results the formula brings.
    Thanks and Regards,
    Harish Mulaka

  • I just got an ipad mini for christmas. charged it fully. was using it fine, then went to turn it back on and nothing is happening. i plugged it in and it doesn't even make a sound like it's charging. the screen is completely black. why would this happen?

    i got an ipad mini for christmas, charged fully. was using it..and it was fine.. went to turn it back on to use again and it's a blank screen. went to plug in and nothing seems to show it's charging or anything. why can this happen??

    Try resetting it.  Hold the on/off and home buttons together for about 10 seconds.  Hopefully you will see the Apple logo.
    If it's a brand new iPad Mini (with retina display), it is under warranty.  You can always take it to an Apple Store or Authorized Apple Service Center for service.

  • Date and time have changed

    The date and time on my iTunes (Windows computer) is no longer accurate. How do I rectify this?

    Hi
    what where is the time shown as i can't find where the date and time is located in itunes. do you mean in the store or in the bottom right hand corner of your screen in the taskbar

  • How to set the date and time format from Windows Server 2008 R2

    Hi,
    I want to control my client's date and time format as dd/mm/yyyy format and I need to do it using the windows server 2008 R2. How can I achieve this goal?
    Yoshika04

    Hi,
    In Windows Server 2008 R2, you can use Regional Options Extension in Group Policy Preferences to configure the date and
    time format. For more information, please refer to:
    Regional Options Extension
    http://technet.microsoft.com/en-us/library/cc754496.aspx
    Regards,
    Bruce

  • Today my iPhone has had a message of No SIM then later it works fine why is this happening?

    Today my phone has shown a message of No SIM and does not work then later it works fine.  Why is this happening?

    Hi Carol...
    error message that my computer needs to be shut down. It is like a dark screen comes down
    That is referred to as a kernel panic.
    Help here >  Tutorial: Avoiding and eliminating Kernel panics | MacFixIt - CNETReviews

  • HT202157 Apple TV says it is updating date and time after a power outage here.  But nothing happens.  The wheel just keeps spinning.  What do I do to be able to use my apple tv?

    Apple TV says it is updating date and time after a power outage. But the wheel just spins and nothing happens..  The software is updated and my wifi router is on and working fine and recognized by the Apple TV.  How do I get Apple TV to work again?

    Thanks for the tip.  Unfortunately &quot;Restart&quot; did not change the situation.  I then used the &quot;Restore&quot; option.  After about 45 minutes of the unit going through the process, Apple TV was up and running again.

  • Okay, so my baby brother had put my iphone in microwave and now it turns on only on the charger, the screen will not work and the date and time has changed, is there any way it can be fixed or how much it would cost

    okay so my brother had put my phone in microwave , it now only turns on on charger, the date and time cahnged, but it will not let me use the screen, is there anyway this can be fixed ?or how much it would cost.

    I would very much doubt that. The radition level inside a microwave is termendous. I am totally flabbergasted that there is much of it is still that much working.
    Allan

  • How do i print off deleted messages dates and times sent and received

    @@

        Hi Nickass3,
    Great question! I know that printing your messages is important. You sign into your MyVerizon http://bit.ly/xB4iTc  account and click on Messages>Usage details>Click the print icon located at top of the screen.
    Thanks,
    PamelaF_VZW
    Tweet us @vzwsupport

Maybe you are looking for

  • Transfering music from 1 ipod to another?

    i currently have a 4gen ipod nano. and im thinking of getting a touch. but i want just to transfer my music to the new ipod is this even possible?

  • Adobe Drive 2 and Alfresco CMIS in virtual PC

    0. MS virtual PC with windows XP started 1. alfresco 3.3. installed and started in the virtual-pc image 2. adobe drive installed and started in the virtual-pc image 3. enter the URL cmis://[IP-ADDRESS]:8080/alfresco/service/cmis     (or cmis://localh

  • IPhoto unexpectedly quit and lost pics

    I had just uploaded about 50 pics over the course of 3 hours, was importing movie to iMovie, iPhoto quit, reopened it and the pics I had uploaded were gone. There's an event where they were but has 0 pictures. What happened and how do I get them back

  • Character Issue

    It happened after i install snow version i dont know how to fix it pls help Here is the screenshot because i can't explain it: http://img40.imageshack.us/img40/7505/screenshot20090911at121.png Thanks

  • Empty JDEV\j2ee\home\admin.jar

    I tried to add a connection to a remote OC4J. When I tried to install DCM, I got this error: C:\JDeveloper\j2ee\home>java -jar admin.jar ormi://DOMAIN:1810 ias_admin PASSWORD -deploy -file C:\JDeveloper\dcm\lib\Oc4jDcmServlet.ear -deploymentName Oc4j