On-premises & Azure VMs with my virtual Network both can have same Subnet?

Dear All,
May i know Azure support on below scenario.
On-Premises & Azure VMs with my virtual Network both can have same Subnet?
Examples:
On-premises VMs and Azure VMs using same network subnet(192.168.191.0/24).
*On-Premises VMs = The VMs host at my own Data Center.
Thanks.

Greetings!
You cannot configure 2 networks with the same subnet and join them. While connecting via VPN, the packet may not even hit the Gateway of a network to get routed to the other. Also, the destination IP may or may not be present on a computer within the
same network. If it is present, the destination might turn to be undesirable, and if not, the packet might be broadcasted and dropped when nobody acknowledges it in the same subnet.
Hope it clarifies.
Thank you,
Arvind

Similar Messages

I currently have an I5 and as with the previous I4, both buttons have failed and now my battery lasts almost six hours if I don't use it. I cannot upgrade my phone until March, 2015 even though I recently upgraded my phone to the More Everything Plan. Am

I currently have an I5 and as with the previous I4, both buttons have failed and now my battery lasts almost six hours if I don't use it. I cannot upgrade my phone until March, 2015 even though I recently upgraded my phone to the More Everything Plan. Am I destined to be a nonuser for three months until I can upgrade. This is very unacceptable as I've been a Verizon Wireless customer for probably 20 yrs!

As a 20 year customer of ours, we certainly appreciate your loyalty Richey_Rich. I know the importance of ensuring you have a properly operating phone. Can you please clarify which button on the device is not working? Is there any physical or water damage to your phone? Any applications that stay running?
Thank You,
MichelleL_VZW
VZW Support
Follow us on Twitter @VZWSUPPORT

Adding Windows Azure SQL Database to Virtual network

Hi Azure team,
Is there any provision available in Azure to map the SQL Azure database to Azure virtual network?
Scenario:
Azure virtual netowrk has been already created. Worker role can be add to that network. Likely to add the SQL Azure database to that network.
Is it possible? Pleade let us the stpes to do it.
Thanks,

You cannot add a SQL Database to an Azure Virtual Network, see
http://msdn.microsoft.com/en-US/library/windowsazure/dn133803.aspx

My How can I sync my bookmarks with my browser of choice on PC so i can have same bookmarks and bookmark-folders in my PC browser as I have made on my iOS device?

I have saved bookmarks on my iOS device and neately organized them as well. I want my IE or Chrome to import those bookmarks so i can have a copy of each in my computer. Plus I would prefer the same arrangement in my browser as on my iOS device. Is there any way of achieving this using iCloude?
In short, i want to importe my bookmarks from iPad to Windows PC browser (i would prefer firefox, but chrome is also a fine option).

On your iOS device, go to Settings>iCloud, sign in with your Apple ID to create your iCloud account and turn Safari to On. Then set up iCloud on your PC as explained here: http://www.apple.com/icloud/setup/pc.html, and check Bookmarks. The requirements for syncing bookmarks with iCloud are:
Windows 7 or Windows 8
iCloud Control Panel 3.0
Internet Explorer 9
Firefox 22
Google Chrome 28 (desktop mode only)
Not sure if the bookmark organization will be the same on your PC or not.

The correct order for setting up VMs in a Virtual network

Sorry in advance if this has been asked but I couldn't locate it.
I'm upgrading an existing network. Current network has 2 Win Server 2008 r2 VMs. (1 running AD, exchange, sql, dhcp, dns, file services, terminal services. 2 running file services and print services)
The new setup will have 9 Win Server 2012 R2 VMs. 1.DC(AD, DNS, DHCP) 2. Backup DC 3. File Share(File and print services) 4. Admin/Management (RSAT) 5.Exchange (Exchange Server 2013) 6. Remote Desktop Services 7.SQL(SQL 2012) 8. SharePoint 9. Logging
In what order would you create these and migrate existing roles over? I'm thinking I can do it in the order listed 1-9. But does anyone see any potential issues with this?
Thanks in advance.

It's worth getting your head round Bridge Mode and router mode as you can grind your network to a halt if they are misused.
Your ISP issues you with a single IP number which is your identity to the internet. The router part of your modem issues your various devices with new IP numbers - Network Address Translation - which are in a range of numbers for local use only. These numbers cannot be seen by the outside world.
If you now connect another router - such as an Airport Extreme or Express - and it starts issuing its own IP numbers, there is a danger that it will decide to issue a number which the first router has already put into use - 'double NAT'. This results in two devices with the same IP number, and chaos. In some cases you can get away with this as the AE probably issues numbers beginning with 10, and the other router may issue numbers beginning with 192.
However it's better to put the AE into 'bridge mode', so that it simply passes through the IP numbers allocated by the first router. This works perfectly well - I've done it myself for years and never any problems at all.
The exact method varies with your version of the Airport Utility. On older versions, open Applications/Utilities/Airport Utility. Select your Airport in the list and click 'Manual setup'. Click 'Internet' in the toolbar. Click the 'Internet Connection' tab if necessary. Set the 'Connection Sharing' menu to 'Off (Bridge Mode)'. Click 'Update' and wait for your AE to restart.
On the current version, open Applications/Utilities/Airport Utility. Click the image of your Airport and in the pop-up pane click ‘Edit’. In the pane which drops down, click the ‘Network’ tab. Set ‘Router Mode’ to ‘Off (Bridge Mode)’ and click ‘Update’; wait for your AE to restart.

Why do I lose network connection with my standalone networked printer and have to reinstall it

I have a Laser Jet MFP M1530 printer that loses connection with the network. All the computers on the network have to delete the old configuration of the printer and reinstall it prior to it working. The printer is in a standalone configuration. Everything else on the network continues to work.

The Laser Jet MFP M1530 is a commercial product. I suggest posting in the forum for HP Business Support for a better chance at finding a solution.
You may find the Laserjet board here.
Help the community by marking this post as a solution if it solved your issue!.
If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

My iPhone 4S Bluetooth will not connect with either my iPad1, MacBook Pro or Automobile BT. Suspect a stack issue in new BT 4.0 (BTLE) release. Has any one discovered fix to this. I have tried this with two separate 4S phones and have same problem..

One further clarification. I am most concerned with connecting with BT in automobile. I can use WiFi to tether to my other devices. I cannot change the car very easily! My iPhone 3G had no connection issues.

I'm new. Same bluetooth problem. Will not pair with my 2010 VW GTI w NAV system, or my MacBook Pro 17" (just discovered the MacB prob.)
When I initially discovered the problem I went to an Apple Store. Genius was excellent but requested that I check with VW. VW people were very helpful. A mechanic had an iphone 4s. He came out to the car ... He could not pair my phone but he could pair his phone ... So, it's the iphone ... Back to the Apple Store ... the genius was really good. He replaced the iphone. Great ! So, back out to the car & it would not pair, still. So ... can't be the phone , right. Back to VW. The Audi manager had an iphone 4S. He paired his phone with my car. He could not pair my phone to my car. He tries my phone in a new 2011 GTI sitting on the lot ... my phone pairs with it just fine. So ... it's my car. So ... make an appointment to get the bluetooth module replaced. They replace the Bluetooth module. My iphone will not pair. They end up pairing 2 different iphone 4S to my car ... but not my iphone 4S. My iphone 4S will also not pair with another 2010 GTI they have in for service. Though the 2 iphone 4S
pair with the second GTI just fine. They even try pairing my iphone with a brand new 2012 GTI in the showroom ... yep ... it paired fine. So ... ????????????????
They are going to update my nav software next (tomorrow), Hopeful ??? not really ... Will be taking my computer to Apple Store next ... maybe if they can discover why it will not pair to my MacBook Pro it will lead to a solution for the GTI ??? I'll get back to you.

Gave an Ipod with my music to bother, can he load his songs without loosing mine on the Ipod

Gave an Ipod Nano to my brother with some of my music on it. Can he create an Itunes account and add to it without loosing my music

Only if he is setup to manually manage his music.

SQL Azure with Azure Virtual Machine inside Virtual Network - How to connect

Hi Team,
I have one typical scenario where there is one Windows Application I wan to run from my Windows Azure Virtual Machine which is inside Azure Virtual Network (which has its DNS and ADFS and etc..)
Because its Virtual Network, We can't access internet within that network, apparently Virtual Machine can't access SQL Azure. So, How would we resolve this scenario.
Application is running great from my local system so, its accessing SQL Azure Database from my system. So, Application or SQL Azure or connection or such areas has no issue.
Regards, Brijesh Shah

Hi Brij,
Thanks for your reply.
To add a DNS server in an Azure Virtual network, you can refer to the link below:
http://msdn.microsoft.com/en-us/library/azure/dn275925.aspx
To obtain a public Azure-provided DNS server IP addresss, you can run "ipconfig/all" in another Azure VM which is not a virtual network which has DNS server defined. After you add a DNS server in the virtual network that VM belongs to, please restart
the VM to update the change.
However, since you mentioned that you are using a customed domain, I am not quite sure if any other configuration should be done for your domain.
Best regards,
Susie

[SOLVED] Cannot start Virtual Network: "out of memory"

I am attempting to use KVM, Qemu and libvirt to run Windows VM's to test websites in IE. I have gotten everything to work fine except guest to host communication, which obviously is crucial for testing the websites.
Currently i am using macvtap to setup networking, which works beautifully for everything except host to guest networking. The easiest way seems to be to use isolated virtual networks. However, i cannot start any virtual networks. I have tried from inside virtual manager and inside virsh command prompt. I always get "out of memory". I have googled the error and nobody seems to have this problem.
One note, I do NOT have a swap drive. Is this needed for virtual networks?
EDIT:
I have now tried exactly the same on another, identical computer but with swap drive (16gb) and it did not work there either. Both computers have 8gb ram. Seems to be loads free in tops.
Last edited by sup3rman (2015-01-23 12:29:50)

sup3rman wrote:
I am attempting to use KVM, Qemu and libvirt to run Windows VM's to test websites in IE. I have gotten everything to work fine except guest to host communication, which obviously is crucial for testing the websites.
Currently i am using macvtap to setup networking, which works beautifully for everything except host to guest networking. The easiest way seems to be to use isolated virtual networks. However, i cannot start any virtual networks. I have tried from inside virtual manager and inside virsh command prompt. I always get "out of memory". I have googled the error and nobody seems to have this problem.
One note, I do NOT have a swap drive. Is this needed for virtual networks?
EDIT:
I have now tried exactly the same on another, identical computer but with swap drive (16gb) and it did not work there either. Both computers have 8gb ram. Seems to be loads free in tops.
I have the same issue on my install. I got so desperate that I actually wiped my laptop and reinstalled everything, same problem. Out of memory error when trying to create the default network. 16GB of RAM, with 96% of it free when I attempted.

Can I use airport time capsule with a hotspot network?

Can I use airport time capsule with a hotspot network?

Can I use airport time capsule with a hotspot network?
Very very poorly..
It can join a wireless network..
See instructions here.
https://discussions.apple.com/thread/5719954?tstart=0
End result is super slow wireless connection to the TC and all packets pass through the hotspot so expect internet to drop to nothing while you are backing up.

Can Mail remember SMTP with am airport network?

I,
I have searched these forums to no avail...
I seem to remember that MAil is suposed to be able to remember your outgoing SMTP server
along with the Airport network.
Can't find a setting in mail for this. IS it there somewhere?
I, like many hop between airport networks ,and it would be great to have mail remember and know
which SMTP server to use on a specific airport network.
TIA and regards

Mail has no way of knowing how you are connected. You would need to create new accounts mail; the POP details can't be duplicated from an existing account, so just enter garbage but add the new SMTP details. Go into 'Advanced' and uncheck 'include when automatically checking for new mail' (or you will get lots of error messages).
Now when you answer or create a message you will have the option to choose a different account for a different SMPT server.

With the limit of 5 devices per itunes account, I am wondering if I can have 2 itune accounts on the same computer? We have many idevices and I am not sure how to manage them all.

With the limit of 5 devices per itunes account, I am wondering if I can have more than 1 itunes account on my computer?

The limit of five applies only to computers, not to iOS devices, if that's what you're concerned with. But yes, you can have content from up to five different iTunes Store accounts on any given computer or iOS device.
Regards.

I have 1 apple id, 2 5S iPhones with separates numbers and both ring when I get a call on one of the numbers. How do I switch that of ?

I have 1 Apple ID, 2 5S iPhones (1 private/1 work) with separates numbers and both phones ring when I get a call on one of the numbers. How do I switch that of ?

I realize that my wife could make her own iTunes account; however, she's been using mine for about 2 years now and this hasn't been an issue. I guess with the Family Sharing she can have access to all of our music and apps now with her own account.
I'll have to see if unchecking our emails resolves this issue.

Adding a second ExpressRoute connection to an Azure virtual network with networkconfig.xml

We are trying to add a second ExpressRoute connection to a vNet in an Azure subscription. We have already successfully completed the connection to our first ExpressRoute (we are using the Exchange Provider method) using a combination of the virtual network
GUI and powershell cmdlet tools.
However... the GUI only supports adding one site-to-site VPN via ExpressRoute.
The method for adding a secondary site-to-site connection is to export the network configuration (via the Azure portal) and edit the resulting NetworkConfig.xml file - and then re-import this via the portal.
All good, in theory.
The NetworkConfig.xml file exported from the gui:
<Gateway>
<ConnectionsToLocalNetwork>
<LocalNetworkSiteRef name="XXXX">
<Connection type="Dedicated" />
</LocalNetworkSiteRef>
</ConnectionsToLocalNetwork>
</Gateway>
In conjunction with MS Support (with whom we are still engaged), we determined the following should work:
<Gateway>
<ConnectionsToLocalNetwork>
<LocalNetworkSiteRef name="XXXX">
<Connection type="Dedicated" />
</LocalNetworkSiteRef>
<LocalNetworkSiteRef name="YYYY">
<Connection type="Dedicated" />
</LocalNetworkSiteRef>
</ConnectionsToLocalNetwork>
</Gateway>
However, attempting to import this generates the following error message:
"The gateway in virtual network site XXX-XXX-XX referenced multiple local network sites and uses a connection type different than 'IPsec' for at least one of the connections. If a gateway references more than one local network site, the connection
type to all local network sites must be 'IPsec'. 'IPsec' is the default connection type."
This appears to suggest multiple ExpressRoute connections on a single vNet are not supported, which would be contrary to the MS FAQ here:
Can I have one virtual network connected to more than one ExpressRoute circuit?
Yes. You can link a single virtual network with up to 4 ExpressRoute circuits. All ExpressRoute circuits must be in the same continent. They can be ordered through different service providers and in different locations.
(from <link to ms site snipped>)
Does anyone have any idea how we should proceed?
Thanks

Hi Rich,
It looks like you are trying to combine S2S and ExpressRoute. Although at some point in the future we will have the ability to have them coexist, you cannot do so today. Therefore, you must delete the S2S gateways and create ExpressRoute gateways.
You could refer the following link for details:
https://msdn.microsoft.com/en-us/library/azure/dn606292.aspx
Can I use site-to-site and point-to-site connectivity for virtual networks in conjunction with ExpressRoute?
No. A virtual network connected to an ExpressRoute circuit cannot be used with site-to-site and point-to-site.
Regards,
Malar.

On-premises & Azure VMs with my virtual Network both can have same Subnet?

Similar Messages

Maybe you are looking for