On project load, CC7.2 on Windows 8 forces me to change scratch disk location away from Mac-formatted external HDD

When I open a project saved on my external hard drive it wants to change the scratch disks to My Documents Folder.
Once I accept it, it opens the project and then I am actually able to change the scratch disks back. Weird.
It's worth mentioning that my external drive is formatted for Mac and I bought a driver from Paragon allowing my PC to read and write to it. Idk if this is where Pr gets confused.
Windows 8.0
Pr CC latest update (todays date: 19 dec 13)
I hope someone is able to fix it.

Hi frbra1,
The reason why you are getting this prompt is just beacause the files that are saved on your scratch disk while working on MAC have location "/Volume/name of the HD/program or file name", but when you connect that drive to windows the location changes to "Drive Name:\" . So. it is the adressing issue of the drive that you are facing with the drives. It is alo not always necessary that the drives get same name when they are attached to the machine.
Regards,
Vinay

Similar Messages

Itunes library is on a mac formatted external hdd: can windows recognize it

subject pretty much says it all. can windows recognize my mac formatted external hdd? i know when i had my ipod formatted to windows, the mac recognized it, but will the mac formatted drive allow windows to see it, play the music, and possibly move it to my ipod?
thanks!!!

Default, Windows will not recognize Mac formatted disks.
A number of applications can enable Windows to read them.
Take a look at this page: http://www.macwindows.com/disks2.html
I don't have experience with any of the apps. mentioned on that page, so I can't tell you how they perform.
Maybe posting in the iTunes for Windows forum will result in specific information.
M

After i install window 8.1, i can't see window icon in my start up disk, i see only mac icon 10.10, but i can see both mac and win icon in my window boot camp control. i want to see window icon in my mac Yosemite 10.10.2,system preference, start up disk

After i install window 8.1, i can't see window icon in my start up disk, i see only mac icon 10.10, but i can see both mac and win icon in my window boot camp control. i want to see window icon in my mac Yosemite 10.10.2,system preference, start up disk.

Third-party NTFS software interferes with the Apple NTFS drivers, which control whether you can see the Bootcamp partition in the Startup Disk option. As a test, can you uninstall all third-party NTFS software and check System Preferences -> Startup Disk?

How do I take ownership of a hard drive build in windows but installed as an additional disk in my new Mac Pro?

How do I take ownership of a hard drive build in windows but installed as an additional disk in my new Mac Pro?
I bought a Mac and have various HDDs, some Portable some SATA, I can right to them and dont seem to be able to take ownership of them, is this to do with the format or Security seting I can't find?
Any help would be great; thanks.
Stephen

Thanks Kaz-K, this was what I assumed it to be. I have started to move the stuf over to a 4GB internal drive, once done and verified, I will reformat the drive and move it back, blooming nusience.
Cheers.
Stephen

Can you save system settings scratch disks locations for each project?

When you begin a new project in FCE you need to set the System Settings Scratch Disks. Typically you would set a new folder for each project to keep all of your files for each project in one location for that project.
I have a couple of FCE projects going at the same time. I've set each project with a different system setting scratch disk location. But if I open a project which should have a unique scratch disk location folder that I've already set before for that project, it ignores the setting I set for that project and just shows the scratch disk setting for the last project opened instead. It does not appear to save or remember the unique setting for that project.
If you have multiple projects going at the same time, is there a way to save the systems settings scratch disk location for each project and have FCE remember that location for each project?

I turned off the Open Last Project on Application Launch in the User Preferences and it still does not remember the unique scratch disk settings for each project.
Since it is quite common to be working on multiple projects simultaneously, you would think that there would be a way in which to save the settings for each project to help keep all related files better organized.
Any other suggestions?

Help Changing Scratch Disk on Existing Project

I created a project and worked with it, unknowingly, using the default Scratch Disks that Adobe assigns on your C drive in Premiere Pro CS4. Now I want to assign the Scratch Disks to other hard drives in my system. Everytime I do this and close the project and re-open it again, it defaults back to the original default Scratch Disk setup.
Can anyone tell me how I can get the project to recognize and use my new Scratch Disk setup?
Thank you.

What you're doing is the only way. It should work fine. I can't think of any reason that it isn't working.

Formatting external HDD for both OSX Lion and Windows 7

Heys guys,
Tomorrow I will have my first Apple computer delivered after using Windows for many years. What my question is, is that what would I need to format my Western Digital Elements external HDD to in order for me to use it on both my iMac and Windows computers.
Now at Uni I have access to both Microsoft based and Apple based computers but in this first semester we will be using the Microsoft more than the Macs. I want to be able to open and edit Microsoft word files, Adobe Suite files, and other files such as MP3 on both machines no matter where I am.
I have Google searched this but failed to find what I actually want.
In advance I thank you for your replies!

Assuming you'll be plugging it into all the computers directly, FAT32 or ExFAT.
If you'll be using it as a network share, any format writable by the computer it'll be connected directly to.
(60901)

How to change startup disk for a 2012 Mac mini with dual HDD and clean installed with Windows 8.1?

Hi,
I have a Mac-mini (late 2012 model), originally with Mac OS X Maverick Server installed (with two HDD). Recently, I had clean installed Windows 8.1 on one of the HDD (worked perfectly, just slow) and swapped the other HDD (with Mac OSX) with a SSD. I then cloned the Windows OS HDD in to the new SSD. Now I am trying to boot this Mac mini from this SSD, however, since this Mac mini do not have BIOS for me to change the boot sequence at the startup, is there any one can help?
Thank you,
Liusc

If you boot with the Option key depressed what boot options are shown?
Also:
Restart your computer
After Windows is installed, you can switch between OS X and Windows. Use the Startup Disk preference pane in OS X, or the Boot Camp system tray item in Windows to select your startup disk, then restart your computer
How to install Windows using Boot Camp - Apple Support

There is an ad that popped up but it is not allowing me to close it. When I try to shut down the program another window opens asking if I was to navigate away from the page. Even if I select "yes" nothing happens. What do I do to get rid of this?

the name at the top of the tab is "You are today's lucky winner" and all it says on the page is "Congratulations! You won an Apple iPad2. Read below for details". But it just WON'T go away!!!

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* [[Troubleshooting extensions and themes]]

Transferring music from Mac formatted Ipod to Windows Vista laptop

The hard-drive on my Mac laptop recently gave up on me. Unfortunately I haven't managed to transfer all my music to my time capsule and Apple TV. I've lost about 4,000 - 5,000 songs. I've read various articles and tried a few software applications, unfortunately none have work successfully for me.
I know there are some third party software applications that can sort this out but I was wondering is there any free applications or a manual way I can do it?
Thanks in advance for the advice!

There are several different ways to read HFS+ volumes on a pc. I used to have one but it was for reading .dmg on pc. I did find a program called HFSExplorer that might help you. If you can, I would transfer the music you have to your internal HDD on your Mac using a program like Senuti and then putting it on the iPods HDD using disk mode, then you should be able to read them on the pc usaing the aforementioned program.
HFSExplorer:
http://hem.bredband.net/catacombae/hfsx.html
Senuti:
http://www.fadingred.com/senuti/
Senuti has a 30-day/1000 song trial. I'm not sure about the HFSExplorer.
I hope this helps some!

Reformat external drive from mac os to windows

the windows partition on my mac book pro is close to full.
i would like to use an external drive formatted for windows for my growing number of pc games (gw,tdu,fsx,dirt - which run great on the mac book pro windows partition btw).
i tried to reformat a mac formatted external drive using disc utility, erase, format volume, but only choices were mac os extended and unix - no fat32, dos, or windows choices.
if i start up my mac book pro using windows, the drive does not show up in the 'hard drives' section of 'my computer'
please let me know how to reformat this mac formatted external drive so i can use it when the mac book pro is running windows.
thanks

Hi Stefan, Turns out my old ext hd was corrupt. Bought a new 300G G-Drive and got a brand new problem which you may have heard of - the dreaded hal.dll crash. My windows partition crashed and after much effort I finally have everything working.
Had to go to the mac store to get a boot camp 1.4 disk (mine was the original) was able to save files from the corrupt windows partition to my mac partition. next i used boot camp to revert to a single partition on my internal drive, saving my mac system and files. next used boot camp to partition the internal drive into big mac and 31G windows. reinstalled windows. next using disk utility i split my 300G external into 10 30G partitions using your GUID suggestion and formatting in ms-dos(fat32) so my mac could read/write to it. dragged the files i saved to the 30G partitions and they work fine. loaded more games into the 30G partitions and they also are working fine.
could not have done it without your pointing out the GUID option.
vielen dank, john

Different Scratch Disk Per FCP Project

I love FCP Studio and swear by it for most things. I'll cut straight to the point...
I want to be able to set my scratch disk location (capture scratch, render files, audio render files) as a project based setting NOT a system wide setting, and I want FCP to remember this setting for each project.
I am very frustrated with the fact that you can't set the scratch disk to different locations per project, as I am constantly changing the location depending on what I am working on, and sometimes I forget and I'm working off the wrong drive.
Also, sometimes I'm multi-tasking and working on two or more projects for different clients off of different mobile drives. This becomes a big cluster f$!k when I'm forced to render and digitize everything to one drive yet I'm working off of several removable drives that I need to take with me at some point. I need elements for each project to stay on their own drive!
Now, I understand that my need goes outside the real of the normal editor, and may actually cause a larger fundamental back-end issue that I am not aware of, but is it asking too much to have the scratch disk setting a project based setting, and not a system setting?
It seems to me that FCP could just remember where you want to point your files to depending on what project you are working in?
Any ideas? Am I missing an obvious solution? Any 3rd party software out there to help with this?

Matthew Lynn wrote:
... It seems to me that FCP could just remember where you want to point your files to depending on what project you are working in?...
You would think ...
I completely agree and have posted about this on many occasions.
You might find this an interesting read:
http://discussions.apple.com/message.jspa?messageID=10916404#10916404
I absolutely love the ability to set different drives for different file types if we choose.
But it should be a PROJECT setting not a System wide preference.
This thread is just another example of why it should be that way.
Send a suggestion to Apple http://www.apple.com/feedback/finalcutpro.html
Hey, ya never know.
best,
g

Can I use CS4 windows at home and transfer my files to my schools Mac computer!

Next semester I am planning on taking Intro to Computer Arts and I am thinking of purchasing CS4 for my home computer so I can do assignments at home - I also love photography so I plan to use it for that as well. The problem is I have a windows based computer, and my school computer is Mac. Will I be able to create a file in windows and view it on a Mac computer?
Thank you!
Sue

Sue,
I thought Mac computers saved their files in a different format
It was not a "different format," per se, but a bit-order within the format. As John points out, that was a long time ago.
Now, here are some thoughts on the transfer of the files:
One can use external HDD's to move the files around. Note that image files can be pretty large. On most current PC's the HDD format is NTSF, instead of the older FAT-32. Unless it has changed, the Mac OS will want to see the older FAT-32 format for the external. Most come with that format from the mfgr. With image files, this is usually not an issue, because they are less than the ~4GB file size limit of FAT-32. Video files can be a whole different issue.
Most Mac OS's will have no problems with PC-formatted externals. It is not always the same thing going the other direction. My PC's have always been able to "mount" Mac discs. In the old days, I used one of several utilities to accomplish this. Now, it is less of an issue, but if you need to "mount" a Mac-formatted external and cannot, you might want to get MacDrive. Do not recall the price, but it's pretty cheap and effective. One caveat, should you go with MacDrive: upon installation, it will load one of its modules into the StartUp section of your MSCONFIG. Normally, this will just load and be transparent. However, if you get a DVD, that has both Mac and PC versions of programs on it, all of a sudden, your PC will only see the Mac versions, and not see the PC versions. The trick here is to use the included MSCONFIG (from the Start>Run) to NOT load that MacDrive module at StartUp. MacDrive will still work fine, when you launch it, but now your PC will see both versions of programs/files on those dual-platform DVD's.
Again, you might not even need this, but it is an option.
Were I you, I'd pick up an external HDD, with probably a FireWire connection, leave it formatted in FAT-32, and use it transport my image files between home and school.
Maybe one of the Mac-users can confirm whether the FAT-32 is still necessary on current Mac OS's.
One last consideration will be the calibration of your PC's monitor to the settings of your lab's Mac displays. Since the school will not let you adjust the Mac that you're working on, you'll want to calibrate your PC to match the lab machines. Otherwise, you will be doing things like density/gamma correction and color correction on one machine, only to have it look horrible on the other.
Good luck, and have fun in Photoshop!
Hunt

Installation of Windows 7 via USB External HDD (Boot Camp Assistant)

How do I mount Windows 7 Ultimate disk image (.iso) onto my USB external HDD so that I can boot using that USB external HDD? I have tried reEFIt, but it doesn't work for me. It may be because I did something wrong. I would appreciate a comprehensive guide. Thanks.

i suspect you haven't prepared the USB drive as a boot volume.
You can absolutely do this. It is detailed on CNET in the following article: http://reviews.cnet.com/8301-31012_7-20020513-10355804.html

Switching scratch disks mid-project

I'm moving a project from my old Vaio laptop to my new iMac. I've transferred the media and project file fairly easily. Are there any pitfalls to be aware of if I now change scratch disks settings to an external drive? Previously everything was on one and the same disk. Now I've got 2 external SSDs and the iMac's internal SSD.

MM was very buggy in v4 and v5. So much so it was generally referred to as "Media Mangler" .
It was greatly improved in v6 and v7. I haven't had issues with the later versions.
The main problem with it now is the documentation is not exceptionally clear and a poor choice for how to handle the media can lead to a disaster.
Cheers,
x

On project load, CC7.2 on Windows 8 forces me to change scratch disk location away from Mac-formatted external HDD

Similar Messages

Maybe you are looking for