On restart I get the expected boing start up sound and then nothing
Was using the computer just fine. When I rec'd the software update notice, I clicked OK, and upon restart, I get the boing sound and then nothing. A black screen. Is this the mother board? Hard drive? Something else?
Thx
I never just install an update when it presents itself.
Some common tips and recommendations:
Reboot - even in Safe Mode
Close all programs at the least and don't run anyting
Backup and clone your system
Repair your system and clone with Disk Warrior first
Use the combo update whenever possible
Apple has improved the updater and process with 10.5.5+.
When you ask us, I prefer to see "I installed (fill in blank but "security update" or quicktime or whatever it was you actually did).
Some would also recommend running Repair Permissions first.
"Normally" it should work. In real life, we need preventative medicine.
Similar Messages
-
TV shows and Movies won´t start, only loading and then nothing
Suddenly TV Shows and Movies won´t start on my Apple TV. After purchasing, it starts to load and then nothing. It loads for a few minutes and it says it was "unsuccesfull". I have tried to restart the Apple TV and the WiFi. Please help!
Hi ChristineLunde,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
Apple TV (2nd and 3rd generation): Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS4546
I hope this information helps ....
Happy Holidays!
- Judy -
How to get the current running activity , suspend it and then restart it?
hi everybody,
i'm new in the Bpel world so please try to help me ...
So my question is how, while a bpel process is running, can i get the activity currently running...and if there is a problem while the execution i can get where exactly did the process stopped and i could restart it?
i know these are lot of questions but any thing could help....
thanks in advancei already tried JAVA BPEL PM API i wrote the code but i didn't test it yet...
since i don't know yet how to write a hole project running in the oracle server i couldn't konw if my code is running or not???
Locator locator = new Locator("default","bpel");
WhereCondition where = WhereConditionHelper.whereActivitiesOpen();
IActivityHandle[] activityHandles=locator.listActivities(where);
System.out.println("state of an activity "+ activityHandles[2].getState()+ " " +activityHandles[2].getLabel());
but to know which activity was running when a problem occured...i'll give a look to the file you gave me about bpel fault policies....
but to restart the process with java code from specific activity...i didn't find in the API something to do this..
so may be you could help in this point???
thanks in advance -
In iMovie, why do I get the msg "high resolution video thumbnails" and it automatically goes to Now and the laptop is hung up for a very long time and I have to shut down to get out of it?
Hi,
Welcome to the Discussions
So we have DSL Modem <-> Base Station <-> Computer connected by Ethernet.
Is the Modem Routing ?
Is the Base Station set to "Share An IP" ?
(i.e are there two DHCP servers on your LAN ?)
Is Internet Sharing On in th G5s System Preferences > Sharing pane ?
In the Base Station is Port Mapping Protocol Enabled if it is doing routing ?
It is in the NAT tab of the Internet Pane.
Is the G5 also doing WiFi to the Base Station ?
Also check the Modem is not Blocking PINGS as this log shows no PING (But I am not sure it even got that far)
7:45 PM Thursday; February 18, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat" -
I installed 4.0 on two computers and they both are unable to access the Facebook game page. I have another computer with 3.6 and don't have a problem with it. On Facebook players send request to join them on games. When I go to that game the page begins to load information and then it just disappears or goes white. I still have a Facebook menu on top of page.
Because I am having issues with Norton Security Suite with the upgrade to Firefox 4.0.1, I have been dealing with that as well, with no success to-date. However, I did notice today when I was looking in my trash, an interesting thing occurred with the upgrade that MAY have something to do with the apps. in Facebook not working correctly now with Firefox.
In my trash, there are several folders of 'Recovered Files'. Two of them are loaded with Internet Plugins for Facebook and were all dumped on May 1st, the day I upgraded to v. 4.0.1 Firefox and began having all my problems. For example, they are plugins like: plugin-cross domain.xml, plugin-gateway-1.php, plugin-102452128776.gz-72.json, just to name a few of them. Now, I am wondering if they were inadvertently removed during the upgrade process, or if they are in conflict with the new upgrade. Should I put them all back into Library -->Internet Plug-Ins to see if that resolves the problems? There are so many of them, I wish there was a way to mark them in some fashion in case I would have to remove them and not take the wrong ones out! Maybe there is a way I can color code them before I move them. I hate using 2 browsers!
I notice that 2 other people have this problem but I don't see where they left any post. I really wish Norton, Firefox, and Facebook would get this ironed out. I never had a problem with anything until this and I don't like to spend all my time trying to troubleshoot something I don't understand! Anyway, thanks for listening. -
My Mac wont start up. I turn it on and hear the sound,sea grey screen withy he apple and then it turns off after a few seconds.
See this link for some tips.
http://support.apple.com/kb/TS2570">Mac OS X: Gray screen appears during startup -
From my downloads folder it recognizes the file as a Pages document, I can preview the entire document, but I try to open the file in multiple ways (from right click, to open from preview, from inside pages) and it refuses to open. The "opening" prompt comes up, fills ~90% and then I eventually get the SBBOD. It will fail out if given long enough to think it through or i need to force quit.
OS- 10.7.5
Pages: downloaded from App store when i purchased my mac mini last fall. fresh update.Since it has always been very basic to backup your computer and all it's data, Apple provides no way for you to transfer music from your iPhone back to your computer. As you know, you can re-download all iTunes purchases, but music that you ripped yourself you'll have to just re-rip again.
You can try and find 3rd party applications that might help you. I'm sure you'll pay, however.
Let this be a very important lesson learned.
Best. -
What can I do to correct the problem with iPhoto closing immediately without loosing my photos?
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful. -
I googled Firefox and downloaded it for free. Now when I click on the firebox icon at the bottom of the computer page, a small blue circle pops up circles a few times and then goes away. I have tried to go to the menu button but when I do it just take me back to the previous page I was on.
I cant seem to access firefox. Or reset it. What can I do to gain access again? The icon is still on my screen but I cant get into it.Hi there,
Are you sure you downloaded it from mozilla.org and not from another site? There are unfortunately counterfeit sites out there that are trying to offer Firefox downloads when in reality they are malicious.
Go to www.mozilla.org and make sure you install Firefox from there and let us know if that makes things work for you.
Thanks!
- David -
When I touch the secret passages icon to load it the progress bar completes and then the game won't start it goes back to windows. I really like this game but if it carries on I might have to delete it sadly
Have you checked to see if there is an Update for the game ?
Also... Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons... -
So what gives?? I have check all three to make sure settings are the same, once in a while it will allow the listings to show and play. But for the most part, NODDA, sad, I like my music and would like to have this rectafied.
Garrettchicx wrote:
This is the third time of writing this on your Apple Support Communities!
Not with your current user id.
Far too much uneccesary information in your post, which only confuses things, a vast amount!
Let's start with iTunes.
Have you updated iTunes to 11.1.5, because the previous version did appear to have an issue about seeing iPods?
With iTunes 11.1.5 installed, look in Edit/Preferences/Devices, (or use the ALT key, followed by the E key and then the F key) and make sure that the box named Prevent iPods, iPhones and iPads from syncing automatically does not have a tick in the box.
Once you have doen those two things, check to see if the iPod is seen by iTunes.
chicx wrote:
By the way, what does IOS mean? (I thought IO stood for operating system, but am flummoxed by the S on the end.
Really?
OS stands for Operating System. (In computer speak, IO means Input/Output.)
iOS originally stood for iPhone Operating System, but it now refers to the iPod Touch and iPhone. The iPod Classic, which you have listed in your profile as your iPod, does not use iOS.
I assume that you have been listening to the Podcast in your iTunes on the computer as you cannot transfer it to your iPod. It's what I'd do. -
Start button lites up, then nothing, any thoughts?
I have a G4 1.25 dual running OS X 10.3.9 with 1.75 GB RAM and a second internal drive WD caviar, 120 GB. Today when I attempted to power it up the backlight on the power button lit up briefly and then nothing, no fan, no drive spinning no nothing, displays black, the lite just goes out as quickly as I release the button. Yesterday it was running fine, no wrong dates or anything like that. I had a low space warning regarding the start up drive while running FCP 3 but dumped about 20 GB of media out of iMovie and it seemed okay. any thoughts?
Here's the power supply instructions.
*Installing Power Mac G4 MDD Power Supply*
http://www.ifixit.com/Guide/Repair/Installing-Power-Mac-G4-MDD-Power-Supply/1622 /1
Or you can download the PDF guide @ http://www.ifixit.com/pdf/guide1622en.pdf
I did notice a tiny blue lead in the corner of the door which was just dangling loose, it was retained in a u shaped cut out in a small tab of sheet metal standing up at 90 degrees to the door, is that blue lead supposed to be loose?
I believe, based on your description, the sheet metal bracket is for installing an Airport card & the lead is for connecting the antenna to the card.
Do you know a link for how to reset the boards and check out other type stuff?
The G4 originally came with Apple Hardware Test software on the system DVD.
best way to clean up the inside of the machine, lots of dust, looks like the foam behind the intakes is crammed full of dust.
Get canned compressed air to blow off the dust. Don't use a vacuum cleaner because static electricity could damage the electronics.
The max OS is Leopard 10.5.x.
Cheers, Tom
PS. I'm also a UT Austin grad - 1958. -
hello, all of a sudden without apparent reason I can't get "MAIL" to function. It starts up but I get the color wheel turning like crazy and never ends. I've tried restarting and I still can't get it to work. PLEASE HEEELP!?
In the Desktop Manager > Sync > Configuration, make sure the calendar options are set to override Outlook.
Set it also to notify you of the changes, so you will have to approve any changes.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
I just installed OS X Yosemite on my MacBook. I now cannot get the computer to start up. If I hold down the power button to try and power it back up, it will not start. Any ideas on how to fix this?
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Download and install the OS X Yosemite 10.10.3 Combo Update.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
I can't get the laptop to start. I get to the gray linen screen with a gray apple and stop. It will not ask for log in.
What do I do now?Hold the shift key at boot time, then run through this list, did you install anything recently or perform a update of some third party software? Uninstall it.
Step by Step to fix your Mac
Mac won't boot or "You need to restart"
Create a data recovery, undelete boot drive
Maybe you are looking for
-
My family and I have been sharing the same Apple account for awhile now to share apps, contacts Etc. That's great and all, but because we share the same account on multiple devices, whenever we use iMessage, all replies show up on all devices. I wa
-
Product Registration program h
Ok just recently the product registration module has been poping up on startup with a message"Gentle reminder: Register your Creative products now to enjoy a host of benefits" I hit the OK button and another window pops up saying "The product registr
-
How to get label text for the Input Field in code
Hi, I have created Two UI elements InputField and Label. I set the property 'labelFor' of the UI element Label to 'InputField'. This is my requirement . I am having the Id of InputField in the code . I want to get the value of 'text' of the UI el
-
Can I Add the Trash to the side bar
Can I Add the Trash to the side bar I want the trash on my side bar every time i open a folder i want it somewhere here
-
Windows 7 driver for iPhone 4 not reconized
Hello, I have an iPhone 4 and windows 7. When I plug my iPhone to my laptop, iTunes reconizes it and all works in iTune, BUT it does not appears in my desktop menu and I cannot acces to my photos. Windows 7 doesn't manage to install the driver for iP