ON RESTORING 1601 ERROR COMING HOE WE SET SECURE SETTING FOR RESTORE AND UPDATE

If you don't have a sim card in the phone, you won't be able to activate it. You can't activate any GSM iPhone without a valid sim card installed in the phone. The sim itself need not be activated, but it must be valid & present.

Similar Messages

After an update to firefox I keep getting a warning from my Firewall (McAfee) "Program wants internet access". I have permission set at outgoing for firefox and updates checking off, to check that request is valid so what does it need access for

After an update to firefox I keep getting a warning from my Firewall (McAfee) "Program wants internet access". I have permission set at outgoing for firefox and updates checking off, to check that request is valid so what does it need access for

This was not a Firefox update, but a piece of malicious software you have inadvertently downloaded from a site called http://ffftp.co.cc/ which is impersonating Firefox. I discovered this as soon as my Zonealarm requested permission for "Golds" to access the internet. Golds??!! However I couldn't find a file with this name installed on my computer.
You should delete the file you downloaded and certainly do not allow internet access to any suspicious program. If you have already given permission, scan your PC immediately for any virus, malware, etc. Best of luck.

HT4623 my iphone 5 is stuck in recovery mode with error 14 unknown error coming up each time i try to restore.

my iphone 5 is stuck in recovery mode with error 14 unknown error coming up each time i try to restore.
Any suggestions?

Hi ShinefromOKC,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/ts3694
Error 13, 14, 35 and 50 (or -50)
These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different Dock Connector or Lightning Connector to USB cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. An incorrectly set default packet size can cause this error. Contact the software manufacturer that installed the packet-size modification for assistance. Or, follow this article by Microsoft to reset the packet size back to the default for Windows:How to reset Internet Protocol (TCP/IP).
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.
I hope this information helps ....
Happy Holidays!
- Judy

HT201328 I have been given permission for unlocking my iphone 3 GS from Orange. I want to set up the phone for my wife to use with a new number and carrier. Do I unlock under my itunes account first or set one up for her and then unlock the phone.

I have been given permission for unlocking my iphone 3 GS from Orange. I want to set up the phone for my wife to use with a new number and carrier. Do I unlock under my itunes account first ( I now have a new iphone on this account) or set one up for her and then unlock the phone. I am worried about upsetting the new phone.

I would complete unlocking as is and then
restore as new once you know the iPhone is unlocked
Be aware Orange will process the request at their speed
one of the reasons they usually reside at bottom of User Sat surveys
will likely take weeks
This may also help
http://support.apple.com/kb/HT5014

TS3694 Ipad won't turn on at all, and is recognized by itunes as being in recovery mode- when I try to restore it stalls on the portion stating "preparing device for restore" and on the page it says "itunes is restoring the software." Been like this for a

Ipad 4 won't turn on at all, and is recognized by itunes as being in recovery mode- when I try to restore it stalls on the portion stating "preparing device for restore" and on the page it says "itunes is restoring the software." Been like this for a day. I read the restore notes on apple, but this seems to be a little more unique than the standard recovery issues. Any ideas as to why I seem to keep stalling during the restore process?

Couple of things I can think of before going to the Apple store.
First, if you can, power off the iPad. Then connect it to the charger that came with the iPad and plug that into a known good wall outlet. Leave it there at least an hour then try to reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart.
Also, you mentioned you have the latest iTunes. But it would be good to check the actual version. If the iPad is running iOS 7 you need iTunes 11.1 or later.

I see that many people have already complained about Itunes' backup encryption. I NEVER set a password for it (and the corresponding option is still unticked, as always) yet it asked me for a pwd when I upgraded my 3GS to the 5.0 OS. How to solve this?

I see that many people have already complained about Itunes' backup encryption. I NEVER set a password for it (and the corresponding option is still unticked, as always) yet it asked me for a pwd when I upgraded my 3GS to the 5.0 OS. How to solve this?

To prevent others from reading your mail, don't give them access to your account. If others need to use your computer for some reason, set up personal accounts, or a guest account, and switch to it before allowing them access. This is the simplest, and most effective, method.
Email message files can be read as plain text in TextEdit or any word processor.
To protect your email messages from being viewed by others while in your account, you would have to lock the folder, putting it into an encrypted disk image that required a password to be opened and mounted. You would have to double-click on the image and give your password to mount it before launching Mail then unmount it as soon as you're done. My guess is that you could replace the ~/Library/Mail folder with an alias pointing to the folder on the disk image.
It may work, but it seems like a lot of unnecessary hassle.

For printer LaserJet Professional CM1410 any chance to set printing password for windows and MAC

Dear All
for printer LaserJet Professional CM1410 any chance to set printing password for windows and MAC?please help?

What Windows OS are you using? Are you networked?
If you are networked, you have to setup your file and print sharing options in order to require password assess. If you are just trying to control specific files from being printed, you can do that, too.
If you are just trying to control the amount of printing off of a single PC with a printer, you could setup different accounts for each user and limit their access.
Some of the commercial printers can have password options, but I do not find any password options for the CM 1410, other than what I provided earlier.
If I have been helpful, a Kudo is always appreciated.

How to set userlevel permission for GFS and NFS

hi
how to set userlevel permission for GFS and NFS?
regards

hi
http://www.redhat.com/docs/manuals/enterprise/
AND
http://en.tldp.org/
probably your best bet.
regards

Recently purchased a 2nd handed iphone 4 (that's all i afford) but when trying to create icloud account it give me "com.apple.appleaccount error 403" message. I am asking for support and advice.

recently purchased a 2nd handed iphone 4s(that's all i afford) but when trying to create icloud account it give me "com.apple.appleaccount error 403" message. I am asking for support and advice.

Did you already check this post?
Re: I am facing problem in signing in iCloud on my iPhone. when I enter my Apple ID, I got the message which is: "The Operation could't be completed. (com.apple.appleaccount error 403.)" Kindly solve my problem. I want to sign iCloud from my iPhone.worri

I'm trying to update the latest version of iTunes but my computer gives me an error saying to go to tools then download only and update manually. What do I do?

I'm trying to update the latest version of iTunes but my computer gives me an error saying to go to tools then download only and update manually. What do I do?

Try updating using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/

ITunes 11 freezing while transfering music, and can't eject it, so I need to disconnect the cable, then iTunes works just fine and my iPod Shuffle is in restoring mode. I've been having this issue for weeks, and never had it before with iTunes 10.

iTunes 11 freezes and can't eject my iPod, so I need to disconnect the cable, then iTunes works just fine and my iPod Shuffle is in restoring mode. I've been having this issue for weeks, and never had it before with iTunes 10. Please tell me at least a way to eject it without losing all my data and being forced to format/restore the iPod. I've got 2GB iPod Shuffle 2nd generation(:D)

As a test, shut down (power off) your computer and disconnect all USB devices including hub (except for standard keyboard and mouse if normally used). If your computer is a laptop, connect its power adapter (so that it's not running on battery power). Do this to reset the shuffle
http://support.apple.com/kb/HT1655
Start up the computer, run iTunes, and connect the shuffle to a direct USB port on the computer. Does this problem recur when the shuffle is the only USB device?
If it does (as another test), select the shuffle in iTunes, so that its Settings screen is showing. Check the box for Enable disk use, and Apply. Does that make any difference regarding this problem?

How to fill up set up tables for 2lis_03_UM and BF?

Hi,
I am working on Material movements, and i have a How to do document. According to that, its showing me to fill up set up table for 2Lis_03_bf by using TCode OLI1BW, and in the very next step its again telling me to fill up set up table for UM, by using the same TCODE ( OLI1BW ) .
Now, if i do that, how would the system know that it has to fill up set up table for BF and then UM ? , no where in the screen its asking to fill up the Data source.
OR i just have to fill up set up table ONCE, and it will fill up for both the DS ?
please help.
thanks

Hi,
I think you can follow the same procedure. After completion of setup table filling you can check the result in RSA3.
In case of UM, you will have the provision to load data based on specific Company codes, but if you don't have any such requirement then you can simply fill setup tables.
Regards,
Durgesh.
Edited by: Durgesh Gandewar on Aug 30, 2011 10:29 AM

When connecting to Itunes, it shows the following error: registry settings used by itunes drivers for importing and burning cds are missing. I have installed the gear drivers, uninstalled and installed itunes still showing same error. Anything else?

When connecting to Itunes, it shows the following error: registry settings used by itunes drivers for importing and burning cds are missing.
I have edited the registery, downloaded the Gear drivers, uninstalled and installed itunes, and the error still appears.
What else can I do. Cannot connect any of our iphones or ipods to itunes because of this error.

I have edited the registery,
We'd better have a closer look at the keys to see what's going on.
Can you post a screenshot of the contents of the key you've been editing, please? Include all of the regedit screen, including the left-hand column. Save the screenshot to an image file, and insert the image file in a reply by clicking the wee camera icon at the top of the reply window.

How do I set up pages for mac and ipad to share a document and keep them synced.

How do I set up pages for mac and ipad to share a document and keep them synced.

You can upload them from Mac to iCloud and then download on the iPad. They only directly sync between iOS devices. The Mac version of Pages has more options that are not available on iOS. If you use a font that is not available on iOS it will change the font. Some layout options aren't available either.

Iphone 4 wont restore - 1601 error

Iphone 4 - 4.1 factory unlocked - bought in Switcerland! - 1 mount old.
Issue: Iphone started to power off every 2 every hours and going in to the restore mode! Done a 4-5 restores on 4.1! But know it wont restore. It gives me
error 1601 - and wont pass itunes screen Preparing iphone for restore!
And also itunes recognizes iphone only in dfu mod! I tried in recovery mode
but itunes didnot recognized my iphone - tried on 3 difernt computers(windows platform)
I have tried almost everything! Change usb port,3 differnt computers ,reinstaling itunes, cleaning the registry after uninstall, tinyumbrella - to kick device, etc.
Anyone any suggestions? If it is a hardvare issue, will Apple accept warranty
because a got this iphone 4 for birthday - ( it is used in another country).
Also it is registered on my name!

apple only provides warranty in the country that the phone was purchased in so you will have to go there to get a warranty replacement

ON RESTORING 1601 ERROR COMING HOE WE SET SECURE SETTING FOR RESTORE AND UPDATE

Similar Messages

Maybe you are looking for