On right click, the focus is not set on tree node.

Dear members,
I have a tree and a database block, when i right click on a tree node, the focus is not set on the node.
If I first click on the node and then right click on selected node it populate the database block.
But I want to populate the datablock on right click.
how to implement it?
Regards:

No body ever encountered this problem?
Any advice would be appreciated.
Thanks

Similar Messages

Then 'm selecting 3 points after camera tracker and right click them there is no SET GROUND PLANE in the list, can U help me?

Then 'm selecting 3 points and right click them there is no SET GROUND PLANE in the list, can U help me?

Quit farting around with the camera tracker. You're not nearly ready to handle it. Go here:
Getting started with After Effects (CS4, CS5, CS5.5, CS6, & CC)

TWO CRITICAL BUGS: 1) File, "Save Page As" and 2) right-click the picture and select "Save Image As", both do not work at all in Firefox 27, 28, and 29!

Note: capitals are used only to highlight important words.
PLEASE, TAKE THESE COMMENTS ON TWO CRITICAL BUGS VERY SERIOUSLY BECAUSE THE BUGS DESCRIBED BELOW ARE SO CRITICAL THAT I CANNOT USE THE LATEST VERSION OF FIREFOX UNLESS THEY DO NOT APPEAR IN THE LATEST VERSION AND THEREFORE I AM FORCED TO REVERT BACK TO FIREFOX 26.
I have Windows 7 64-bit and Firefox 26. I could not install Firefox 27, 28, and 29 due to the persistent presence of the two critical bugs described below. I have 8 GB of RAM and an Intel quad-core processor and a lot of hard disk space available.
I installed Firefox 27 and then Firefox 28 a while back and these two bugs described below were still present and now I have just checked again with Firefox 29 by installing it and yet again, these two bugs described below are present!! UNBELIEVABLE THAT THESE TWO CRITICAL BUGS ARE STILL PRESENT IN FIREFOX 29 WHEN I CLEARLY INFORMED YOU ABOUT THEM IN THE HELP, SUBMIT LINK OF FIREFOX!!
I am forced to revert to Firefox 26!
First, I use Windows 7 64-bit and I always use Firefox with at least 120 tabs opened. BUT I have 8 GB of RAM, an Intel core i7 quad-core processor and more than 1 TB of hard disk space. Consequently, I do not understand why I would have these two critical bugs.
With Firefox 26, I also have at least 120 tabs opened when I start Firefox and I do not have the two critical bugs described below, therefore I do not believe that the number of tabs is the reason of the two critical bugs that are present in Firefox 27, 28, and 29.
---FIRST CRITICAL BUG:
When I open ANY web page and do File, "Save Page As", the window that is supposed to open to locate the folder where I want to save this web page does NOT open at all, even if I wait a long time to see if it opens.
Same problem happened with Firefox 27, 28, and now 29!! When I reverted back to Firefox 26, this problem did NOT happen anymore!
---SECOND CRITICAL BUG:
When I use Google Images, for instance entering model in the search field of Google Images and then pressing enter.
Then I select any picture, open to a new tab this selected picture, then open a new tab by selecting the option View for this picture. Then right-click the picture and select "Save Image As".
Again, the window that is supposed to open to locate the folder where I want to save this picture does NOT open at all, even if I wait a long time to see if it opens.
Same problem happened with Firefox 27, 28, and now 29!! When I reverted back to Firefox 26, this problem did NOT happen anymore!
---THESE TWO CRITICAL BUGS DO NOT APPEAR WHEN I USE INTERNET EXPLORER 11.
I have no idea if you will be able to reproduce these two critical BUGS but I can assure you that they are not present when I use Firefox 26 and they are present when I use Firefox 27, 28, and 29. More, be aware that I have at least 100 tabs opened but I also have this same number of tabs opened in Firefox 26 and yet I do not experience these two critical bugs when I have Firefox 26!
Once again, these two bugs touch at two vital, critical very basic functions of Firefox and therefore I will NOT be able to use any version above 26 if these two bugs are still present, as they are present in Firefox 27, 28, and now 29!!!
Please, make it a priority to solve these two critical bugs. Thanks.
I did read a post related to the same issues “Firefox stops responding when trying to "save page" or "save image" | Firefox Support Forum | Mozilla Support” at https://support.mozilla.org/en-US/questions/991630?esab=a&as=aaq
I am still reading it again to try to figure out exactly what the person did to make his problems be solved, as the post is not clear at all on what solved the problems!
In any case, all the suggestions proposed in this post do not work and I surely cannot do a system restore when it is obvious that the two bugs do not appear in Internet Explorer.

First, I sent an email to the author of PhotoME to inform him of the serious issues his addon caused with Firefox latest versions.
Now, for those of you who do not have the PhotoME addon and yet experience the same problem that I had and that I described above, I suggest the following strategy.
As PhotoME did cause these problems with Firefox latest versions, I am pretty covinved other addons probably might cause these problems too. Therefore, adopt the following method.
Test one addon at a time to see if this particular addon is behind your Firefox issues like the ones I had.
So, disable one addon only at a time. Then close your Firefox and restart it from scratch and see if you still have your Firefox problems. You must restart the Firefox browser from scratch. If you still have these Firefox problems, re-enable the disabled addon, restart your Firefox (again!) and repeat the same method for every single addon that you have.
Try to be selective by choosing first addons that are more likely to cause your Firefox problems such as not very well-known or not very popular addons (like it was the case for the PhotoME addon).
If this method works or if it does not work, report it on this web page so that others can be helped with your comments.
I hope this method will help you because I was really upset that I had these Firefox problems and I first thought it was the fault of Firefox, only to discover later that this PhotoME addon was the culprit and had caused me such upset.

After right-clicking the Firefox Icon, a window pops up with one of the titles being "Frequent." Web sites are always being added to this section that I do NOT want. Is there a way to control the number of listings under "Frequent?"

After right clicking the Firefox Icon, a window pops up above the icon with three sections in it. Two are titled, they are "Frequent" and "Tasks."
The "Frequent" section each time I see it, has added previous sites that I have visited. This list then has lots of duplicates in it. I do not need that, and would like to keep this listing a a favored few.
Is there a way to stop having superfluous web-sites added to the "Frequent" list ??
Thanks!

After right clicking the Firefox Icon, a window pops up above the icon with three sections in it. Two are titled, they are "Frequent" and "Tasks."
The "Frequent" section each time I see it, has added previous sites that I have visited. This list then has lots of duplicates in it. I do not need that, and would like to keep this listing a a favored few.
Is there a way to stop having superfluous web-sites added to the "Frequent" list ??
Thanks!

Right clicking the star of an already bookmarked site does NOT bring up the option to edit the bookmark to put it into a chosen location as described in Helpl

The option to edit the bookmarks is missing from my current version 29.0.1. Right clicking the star
produces a menu but not the one described in Help.
Move to Menu
Remove from Toolbar
Menu Bar
Bookmarks Toolbar
Customize

This question was about clicking the star on the Navigation Toolbar to edit the bookmark.
You need the left-click the highlighted star button to edit the bookmark because a right-click opens the toolbar context menu.
You can right-click a bookmark in other places like on the Bookmarks Toolbar or in the sidebar and in the Bookmarks Manager (Library) to edit the Properties.

How do I Change sub category to a key word tag in Elements 6. When I right click the sub category is the possibility to change not selectable

I want to change a sub category to a key word tag in Elements 6. When I right click the sub category is the possibility to change not selectable. How to do it?

If you want to change the category you need to change the feed, which means changing it in WordPress. You need to pick one category and, if there is one, one sub-category from the official list here:
http://www.apple.com/itunes/podcasts/specs.html#categories
It is possible to have further categories, though I don't know whether WordPress will allow that, but you should put the most relevant one in first.
Once you've amended it simply re-upload the feed and wait for the Store to catch up. You don't need to resubmit.

My send messages are not being captured. Matt said to right click the folder, etc. What folder? Where?

Only the subject shows up above the line. MattAuSupport said to right click the folder, select properties and repair. But what folder are you talking about? Where will I find it?

To answer your question, it would be the folder that you are complaining about. So back to you, What folder are you having problems with? The Sent folder? Then that would be the one to right click to repair.
It is kind of like flat tires. You repair the one the air came out of.

The only working print-related function in BioBench1.2 on my PC is the "Print Report", all the other "Print" functions gave me "Error, the printer is not set up correctly".

I used to print all my BioBench data by first exporting them to Excel and then print from there. Recently I need to print some of the screen shots and some data directly from array analysis, but when I click on the "print" buttons, the "Error, the printer is not set up correctly" message occurs. The only thing I can print from BB without this error is the report printing function. I have a postcript printer and I have set the postscript option to be "true"... Thanks !

This problem is a result of a limitation in Windows 9x regarding the size of an image that you can send to the printer. The problem does not occur on Windows 2000/NT. This problem appeared with the increased color options of LabVIEW 6.0 on which the BB1.2 is based.Although it is not immediately obvious, your video driver and settings play a role in printing.
1. Try adjusting the color palette your driver uses (i.e., 256 color, high olor, true color). The error may occur only in one of these modes. Also, change the resolution (number of pixels) to represent the Screen Area; e.g., change from a 1024 x 768 display to an 800 x 600 pixel display.
2.Certain video drivers also support "acceleration" modes. Using a non-accelerated mode often eliminates the error. For
Windows 95/98, right-click on your My Computer icon and select "Properties" from the pop-up
menu. On the Performance tab, click the Graphics button and change the Hardware Acceleration (e.g., if it is set to "Full", lower the setting a notch or two); for Windows 2000/NT, right-click on your Desktop and select "Properties" from the pop-up menu. On the Settings tab, click the Advanced button and go to
Troubleshooting.
3.In Windows, the standard VGA driver provided by the operating system is very stable. Try using this driver in place of the specific one written for your video hardware. If the error is eliminated, there is likely a problem with your vendor-provided video driver.
4.These errors are most often fixed with the latest
video/printer driver. Be sure to contact your hardware manufacturer and install the latest driver. An easy way to determine if your error is "driver-related" is to move your code to another machine (and hopefully a different set of drivers) and see if th
e error persists. If the problem is printer related, try another printer.
5.Make sure there are at least 100M avalible space in your C: drive. If not, set the virtual memory to the other drive which has larger available space.

Why some of the tables are not set cacheable by default.

Hi all.
in the case management analytics in OBIEE. (Case Management Analytics Fusion Edition)
Some of the tables for example (W_CASE_D, W_INCIDENT_D, W_LEAD_D) are not set Cacheable.
That means, select table, right click, properties, Cacheable is NOT ticked in.
does any one knows the reason why ?
Thanks,
Shanker.

Hi Srini.
Sorry, I think you did not understand my question.
basically some tables are set as 'Not Cacheable' in Case Management Analytics, I am not sure, why ?
do you know may be why ? all tables are marked as 'Cacheable' when looked from Table > Properties.
But few ((W_CASE_D, W_INCIDENT_D, W_LEAD_D) NOT, WHY ? is it on purpose Oracle has done this way ?

HT4623 I have an ipad 2 on ops 4.3 and have just updated to 7.1 via itunes. I backed up first and have synced repeatedly but keep getting a message on my ipdad screen that the ipad is not set up - I chose the set up option restore from itunes back up

I have an ipad 2 on ops 4.3 and have just updated to 7.1 via itunes. I backed up first and have synced repeatedly but keep getting a message on my ipdad screen that the ipad is not set up - I chose the set up option restore from itunes back up

To free up hard drive space the best bet is to move data files that you don't need access to all the time. Likely candidates are music, video, and photos. Things like word processing and spreadsheet files can also be moved but they tend not to be very large and so don't free up much space. The problem with moving the above mentioned files is that iTunes and iPhoto need to know where the files are stored.
Here's an article explaining how to move the iTunes folder. You can move the iPhoto library using the Finder but there is a slight complication. Start iPhoto, open the Preferences and click on the Advanced tab. The first option is "Copy items to the iPhoto Library". If this option is checked, copy the iPhoto library to your external folder (drag it from the Pictures folder to your external drive) and then delete it from your Picture folder. If this option is not checked, it is a bit more complicated and we'll need to talk a bit.

The OMS is not set up for Enterprise Manager Security

Hi, I'm trying to add an agent to grid control and its not connecting with the management server because i cant secure it...
bash-2.05$ ../../bin/emctl secure agent <password>
Oracle Enterprise Manager 10g Release 3 Grid Control 10.2.0.3.0.
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Agent is already stopped... Done.
Securing agent... Started.
Requesting an HTTPS Upload URL from the OMS... Failed.
The OMS is not set up for Enterprise Manager Security.
i have tried this on two seperate servers, both do the exact same thing. However, on my repository server where the OMS is housed, i can secure the agent no problem. Does anyone know what the problem could be? My OMS is on a Linux (SuSE 10.2) 32-bit machine.
heres the emdctl.trc on the agent machine:
2007-07-11 11:00:20 Thread-1 ERROR main: nmectla_agentctl: Error connecting to http://cbldb3:3872/emd/main/. Returning status code 1
2007-07-11 11:00:21 Thread-1 WARN http: snmehl_connect: connect failed to (cbldb3:3872): Connection refused (error = 239)
2007-07-11 11:00:21 Thread-1 ERROR main: nmectla_agentctl: Error connecting to http://cbldb3:3872/emd/main/. Returning status code 1
2007-07-11 11:00:21 Thread-1 WARN http: snmehl_connect: connect failed to (cbldb3:3872): Connection refused (error = 239)
2007-07-11 11:00:21 Thread-1 ERROR main: nmectla_agentctl: Error connecting to http://cbldb3:3872/emd/main/. Returning status code 1
2007-07-11 11:00:22 Thread-1 WARN http: snmehl_connect: connect failed to (cbldb3:3872): Connection refused (error = 239)
2007-07-11 11:00:22 Thread-1 ERROR main: nmectla_agentctl: Error connecting to http://cbldb3:3872/emd/main/. Returning status code 1
2007-07-11 11:05:10 Thread-1 WARN http: snmehl_connect: connect failed to (cbldb3:3872): Connection refused (error = 239)
2007-07-11 11:05:10 Thread-1 ERROR main: nmectla_agentctl: Error connecting to http://cbldb3:3872/emd/main/. Returning status code 1
2007-07-11 11:10:08 Thread-1 WARN http: snmehl_connect: connect failed to (cbldb3:3872): Connection refused (error = 239)
2007-07-11 11:10:08 Thread-1 ERROR main: nmectla_agentctl: Error connecting to http://cbldb3:3872/emd/main/. Returning status code 1
bash-2.05$ lsof | grep 3872
bash-2.05$
seems to be failing the connect but nothing is running on the port so i'm not sure why
Thanks in advance
Message was edited by:
user581869

some further information and hopefully someone can help me...
I went to the OMS binary folder (fmc45712:$OMS_HOME/bin) and executed the following commands...
$OMS_HOME/opmn/bin/opmnctl stopall
$OMS_HOME/bin/emctl stop oms
$OMS_HOME/bin/emctl secure oms
$OMS_HOME/bin/emctl start oms
$OMS_HOME/opmn/bin/opmnctl startall
then i go to $AGENT_HOME on the OMS machine (fmc45712:$AGENT_HOME/bin) and execute..
$AGENT_HOME/bin/emctl status agent -secure
Oracle Enterprise Manager 10g Release 3 Grid Control 10.2.0.3.0.
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Checking the security status of the Agent at location set in /opt/oracle/OracleHomes/agent10g/sysman/config/emd.properties... Done.
Agent is secure at HTTPS Port 3872.
Checking the security status of the OMS at http://fmc45712:4889/em/upload/... Done.
OMS is secure on HTTPS Port 1159
I then to go the server i deployed the agent on that i want to get communicating wtih my OMS...
$AGENT_HOME/bin/emctl status agent -secure
Oracle Enterprise Manager 10g Release 3 Grid Control 10.2.0.3.0.
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Checking the security status of the Agent at location set in /u101/em/agent10g/sysman/config/emd.properties... Done.
Agent is unsecure at HTTP Port 3872.
Checking the security status of the OMS at http://fmc45712:4889/em/upload/... Done.
OMS is running but has not been secured. No HTTPS Port available.
same command, different computer, but on the same network, and it just doesn't work. The OMS is on Linux x86 and the agent on the alternate computer is on HP-UX. If anyone has any help it'd be much appreciated.

Right click context menu does not appear only for Java 1.7, AWT TextField

I have been debugging some issues that an application has been having with Java 1.7 versus older versions. A new problem I have encountered is that the right click context menu does not function in any TextField. It works fine when running/compiling it with any previous version of Java. I have tried coding a simple test with a Frame, Panel and TextField to see if it might be something else in the more complex application that was causing it, but the simple test class has the same problem.
I have searched for other people having the same issue, but I have not found anything comparable. This seems like a huge change from one version to the next and I am surprised that I am not finding this mentioned anywhere else. Can someone point me to anything that discusses this issue that I am having? Does 1.7 require I implement my own context menu? I realize AWT is old technology, but this is an old, fairly complex application that doesn't use swing, and that is not going to change at this point.
My simple test:
import java.awt.*;
import java.awt.event.*;
import java.util.*;
class testF3 extends Panel
public static void main(String args[])
    Frame f = new Frame();
    Panel p = new Panel();
    f.setLayout(new BorderLayout());
    f.add("North", p);
    TextField tf1 = new TextField("", 20);
    p.add(tf1);
    Dimension medm = f.getSize();
    medm.height = 100;
    medm.width = 200;
    f.setSize(medm);
    f.setVisible(true);
}

In the past few days since upgrading to 4.0.4, the entire right-click context menu for links is gone and replaced with one item: "Copy Link" The "Open In New Tab" item, along with some other context items, is no longer there.
That's actually a problem with your particular installation of Safari, b. I've got all the contextual menu entries with my 4.0.4.
I helped fix one of these recently here at the forum. Try the procedure from the following post (it got back Tho's missing contextual menu entries):
http://discussions.apple.com/thread.jspa?messageID=10598385&#10598385

Right click Open With sometimes not working (Photoshop Elements 9, Windows Vista)

We recently upgraded from Photoshop Elements 7 to Photoshop Elements 9. We are running Windows Vista.
Last night, my wife was right clicking on JPEG images in her My Pictures subfolders and choosing "Open With" to open the files with Photoshop Elements. In some cases, this worked. In other cases she would right click the file, Adobe Photoshop Elements would start, but the picture itself would not display.
I tested one of these pictures and was able to open it with other applications, and was able to open it by choosing "Open" from Photoshop Elements' file menu.
Has anyone run into this before? Why are some pictures not opening when you right-click and use "Open With"?

Hi,
you can make PSE9 default program for opening any image on you vista machine.
Then it souhld work fine.
cheers,
Sam

I can't open a new tab when I right click the refresh button; same goes when I click on History and right click a past site. How do I fix it?

It happened after Mozilla Firefox's plugin crashed. Whenever I tried right clicking the refresh button or a page in History, it no longer prompted me to "open in a new page." Instead, the box showing the menu bar, navigation bar, etc. showed up. How do I change it back?

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

Right click context menu is not working in flash player 10 and above

In right click custom context menu i have create like "A" if i click "A" i have attached one movie clip in that movie clip right click, i have custom context menu like "Remove A" this is working fine in flash player 9 and below. But flash player 10 and above fisrt "A" is working fine but in that movieclip clip right click "Remove A" is not working Please guide me regarding this issue.
Thanks in Advance
Surendran S

The problem is that Google has an onmousedown attribute added to the links that modify a link if you click or right-click a result link to make the link point to a safe browsing check on the Google server.<br />
You can see that if you hover a link and you will notice that after you have (right) click a link the the URL changes to www.google.com/url?xxxxx.
You can use this bookmarklet to remove the onmousedown attributes.
<pre><nowiki>javascript:(function(){var e=document.querySelectorAll('*[id="search"] a[onmousedown]'),E,i;for(i=0;E=e[i];i++){E.removeAttribute('onmousedown')}})()</nowiki></pre>

On right click, the focus is not set on tree node.

Similar Messages

Maybe you are looking for