On saving mail as .rtfd file does not save the attachments.

For a few updates to Leopard now I have had a problem with Mail. If I opt to save with attachments the file is saved as a .rtfd file but when I open the said file in Text Edit there are no photos or whatever the attachment was. I have been saving this way for years and only in the last year or so has this problem arisen. I don't want to save the files as .eml files (which DO save the attachments). Anyone else noticed this problem?

Dear Glyn
you posted this bug Oct 19; it still has not been fixed, Is there any way to push Apple people to stop behaving like windows people ?
I much regret I installed the new systemsoftware ...
What can we do to FIX it - i need the feature and it has a button to include the attachment, so it should work
grrr

Similar Messages

Recording does not save the file

We are facing a serious problem with Captivate 2. After
recording about 40 -50 slides it does not save the file.
The system hangs for several minutes and there’s no
response.To analyze this problem we have tried out User Forums and
FAQs.In the User Forum too similar problems are reported. For
example, visit:
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=67&catid=464&threadid =1261116&enterthread=y
In fact, in our team Captivate is loaded on a standalone
hi-end system with ample space and memory.
We have also tried workarounds to address this issue. For
example, we deleted all temp files from library and we also saved
it on a short path like c:/project.
Nothing works!!!

Hi Madduser and welcome to our community
When you say
To analyze this problem we have tried out User Forums and
FAQs are we to assume you simply searched them and read the
threads? I'm assuming this because this is your first post here.
You will note that the thread you linked to mentioned the
person was attempting to save on a network. I do see you have tried
using the shortened local path to no avail, so I'm guessing the
network is ruled out here.
As usual, I've got more questions than answers, but hopefully
as we work through them something will come to light.
* Have you EVER been able to create and save things using
Captivate? Or did you just install it and it's never worked for
you?
* Have you tried what is outlined in the following Technical
Note?
Click here to read the
Technical Note
Cheers... Rick

The Downloaded PDF file does not contain the Signature through BSP pages

HI,
We have an requirement for Distributing the FORM 16 to all Employee's through our Website, where the user will login and download his own FORM 16 ( TDS Certificate)
This FORM 16 ( TDS Certificate ) is generated in SAP ( ECC 6.0 ) in Payroll Module.
To satisfy the above requirement we have done the following steps.
1) First we have modified the standards SAP Sapscript(Layout) to incorporate the Signature of Authorised Payroll Person.
We have done this by uploading the BMP file ( though t-code SE78 ) and then calling this file in the Standards layout which prints the FORM 16 document.
2) WE also Modifed the Dirver program to Download the above document in a .PDF file.
The Program creates the seperate file for each employee and assigns the employee number as a file name to each downloaded file. These all files are downloaded on a Users Machine.
We opened the Downloaded .PDF files, and checked for the Signatures. The Signature were comming perfect as it ws uploaded.
3) We uploaded these all FORM 16 PDF file off all emlpoyee's to a different SERVER ( BW 7.0 ). With the help of BASIS person, using the FTP utility.
4) We wrote a BSP program to download this ulploaded PDF Files.
BUT we are facing a PROBLEM in the DOWNLOADED PDF file.
The Downloaded file does not contain the Signature which is there is the Original file we uploded this server.
All other data in the dowloaded PDF file is Perfect other than the Signature.
When we open the downlaoded PDF file it give's following message on the Signautre page.
" Xobject not found named 00013"
The number of the Object comes different to different files.
We are using Function module 'SCMS_STRING_TO_XSTRING' to Convert string to Xstring
We are using the the " CALL METHOD CL_BSP_UTILITY=>DOWNLOAD" for downloading the PDF file.
Please suggest some solution if you can
Thanks in advnace.
Re
GAGAN

HI,
We have an requirement for Distributing the FORM 16 to all Employee's through our Website, where the user will login and download his own FORM 16 ( TDS Certificate)
This FORM 16 ( TDS Certificate ) is generated in SAP ( ECC 6.0 ) in Payroll Module.
To satisfy the above requirement we have done the following steps.
1) First we have modified the standards SAP Sapscript(Layout) to incorporate the Signature of Authorised Payroll Person.
We have done this by uploading the BMP file ( though t-code SE78 ) and then calling this file in the Standards layout which prints the FORM 16 document.
2) WE also Modifed the Dirver program to Download the above document in a .PDF file.
The Program creates the seperate file for each employee and assigns the employee number as a file name to each downloaded file. These all files are downloaded on a Users Machine.
We opened the Downloaded .PDF files, and checked for the Signatures. The Signature were comming perfect as it ws uploaded.
3) We uploaded these all FORM 16 PDF file off all emlpoyee's to a different SERVER ( BW 7.0 ). With the help of BASIS person, using the FTP utility.
4) We wrote a BSP program to download this ulploaded PDF Files.
BUT we are facing a PROBLEM in the DOWNLOADED PDF file.
The Downloaded file does not contain the Signature which is there is the Original file we uploded this server.
All other data in the dowloaded PDF file is Perfect other than the Signature.
When we open the downlaoded PDF file it give's following message on the Signautre page.
" Xobject not found named 00013"
The number of the Object comes different to different files.
We are using Function module 'SCMS_STRING_TO_XSTRING' to Convert string to Xstring
We are using the the " CALL METHOD CL_BSP_UTILITY=>DOWNLOAD" for downloading the PDF file.
Please suggest some solution if you can
Thanks in advnace.
Re
GAGAN

Planning Quick Win Error: Registration file does not match the app version.

Gents,
I have a Fusion 11.1.2 install on a Windows 2003 server environment.
After creating the Planning App in Classic mode, I logged back in to Initialize the App... and I got this.
This occurred when I tried to log on to the Planning App in Workspace. (I was about to go Create/Refresh the app) :
"An error occurred while processing this page. Check the log for details.Please close the current tab and open application again. Single Sign on Validation failed"
The SharedServices_Security.log goes as follows:
2009-05-12 16:08:11,437 ERROR [http-28080-Processor3] com.hyperion.css.common.CSSUtils.checkValidArgument(Unknown Source) -- 26:1002:Invalid value for identity. Enter a valid value.
2009-05-12 16:08:11,468 WARN [http-28080-Processor3] com.hyperion.css.spi.impl.nv.NativeProvider.getHierarchicalRoleTree(Unknown Source) -- Exception getting Child Roles in hierarchy [Root Cause: 26:1002:Invalid value for identity. Enter a valid value. ]
2008-05-12 16:42:47,781 WARN [http-28080-Processor9] com.hyperion.css.spi.impl.nv.XMLRoleRegDocumentModel.recurseDocumentTree(Unknown Source) -- The Product 'Hyperion Planning' Version 'HP-9.5.0' in the Registration file does not match the application version '9.5.0'
Any suggestions?
Thanks.
Eric.

Hi,
If you are running on a Microsoft OS, have a look the log :- :\Hyperion\logs\services\HyS9Planning-sysout.log
Not sure how much information it will give though.
Cheers
John
http://john-goodwin.blogspot.com/

My JSP file does not reflec the change of a Bean

My test environment: Win 2000, JDK 1.3.1, OC4J(standalone)
My problem:
In servlet, the change of a Strng value is reflected at the next refresh of a browser.
But, when a jsp file call a bean's getXXX(return a String value) method, and if the String value of that bean is changed, the next refresh or visit to that jsp file does not reflect the change of that bean.
For example:
1) TestClass.java
public class TestClass {
private String txt;
public class TestClass {
txt = "Test"; ----- (g
public String getTxt() {
return txt;
2) test.jsp
<html><body>
<h2>
<% TestClass test = new TestClass(); --(h
out.print(test.getTxt()); %> --(i
</h2>
</body></html>
In my first vistit to "http://localhost:8888/test.jsp" the brower shows "Test" String, but after I change the txt value to "Test1"((g) the brower does not reflect the change.
I found that if I use <jsp:useBean id="test" class="TestClass" /> instead of (h-(i line, the brower reflects the change of the bean.
Why does this occur?
Thaks in advance.
PS) In some cases(Not above example), I get the java.lang.ClassCastException.
So Each time I change a Servlet or a Bean, I restart OC4J.
null

SangKyu,
<jsp:useBean > has a property called scope, which defaults to "page".
So the bean gets reset everytime you reload the page.
Can I suggest that you set it to "session"?
The following syntax card I have found userful:
http://java.sun.com/products/jsp/syntax.pdf
Cheers,
Scott
Atlassian - Supporting YOUR 'Orion/OC4J' World
http://www.atlassian.com - [EMAIL][email protected][EMAIL]

My version of LR-5.7 (OS X 10.8.5) apparently does not save the .NEF (Nikon RAW) edits done in the basic module.

My version of LR-5.7 (OS X 10.8.5) apparently does not save the .NEF (Nikon RAW) edits done in the basic module. That means that I can correct exposure, highlights, shadows etc. but once I go to another picture and returned to the edited one the histogram (on the edited photo) and specifically the clipping triangles are white or some other color. This is normally suppose to indicate that some channel or all channels are clipped in the highlight/shadow areas. If I adjust any slider in the Basic panel even as little as one +/- value or press the J-key, the histogram will now show the original edit. Moving on to another photo and then returning to to previously edited one and again the edits are "not saved" and I have to hit the J-key or adjust a slider to see the previously edited information reflected in the histogram.
This is especially frustrating for fours reasons. If I have edited a shoot and return to it I cannot see from the clipping information whether the original edit was correct and of course I might re-edit it (to some now incorrect value). This brings up the second issue synchronization. I can't rely on it because if I go back to fine tune a specific image in the batch the triangles are white or some other color for that and every image. I have to hit the J-key to show/hide clipping or the back slash key to see before/after previews. This is the third issue which is very time consuming and inefficient regarding my workflow. The forth issue is that I have noticed that normally when an image is saved in PS, LR adds a copy of the saved version to its catalogue. I have noticed that the PS to LR saves are all wrong in terms of exposure (they are much lighter in tone) than the original LR edit and the PS edit on my screen. If I check the PS to LR photo in LR I notice that the Basic panel values have been changed and that I have to sync the image with the originally edited RAW/NEF LR file to get it to look the same.
Note 1). I am using an Apple cinema display and a calibrated Eizo ColorEdge monitor to view my NEF files. I have reverted back to using LR 4 however I am not sure if I should expect compatibility problems with Camera Raw 7.4 in LR 4 vs. Camera Raw 8.6 in LR 5.
Note 2.) I am going to do an import converting everything to .dng to see if this is a work around.
Note 3). I would be interested in knowing if this issue is related to the PS RAW engine ver. 8.6, the Adobe created NEF calibrations or LR 5.
Note 4). I have duplicated this issue in OS X 10.8.5, OS X 9.xx and OS X 10.10.1
Hopefully someone else has noticed this problem. Any shared information would be valuable. Thanks for the reply.

Happy New Year!
The Develop panel Tone settings in your Dec 31 screenshot show both the Highlights and Shadows controls set to negative values (-48 and -19). For most images (such as this model shot) they should be set to opposite values (-Highlights and +Shadows). To try and duplicate your issue I used negative values for both of these controls with a similar high contrast image. I noticed that the Shadows control becomes non-linear when both the Highlights and Shadows controls are set to negative values. As I moved the Shadows control from a positive value the Shadows clipping indicator comes ON as expected. Moving the Shadows control to a value caused the clipping indicator to turn OFF and moving it further negative caused it to turn back ON again.
The following screenshots demonstrate the issue with only Highlights & Shadows controls applied as shown.
The Highlights & Shadows controls set just to the threshold of extinguishing the clipping indicators.
Moving the Shadows control toward negative causes the Shadow clipping indicator to come ON (as expected), but at-13 it goes OFF again!
Moving the Shadows control further negative causes the Shadows clipping indicator to come back ON at -33.
This is probably normal behavior for the PV2012 Image Adaptive Tone controls as they were not designed to be used way (- - or ++ Highlights & Shadows). The PV2012 Tone controls all interact with each other, which is why it is suggested to adjust them from the Top down starting with Exposure. For most images using -Highlights and +Shadows of near equal value produces good results.
I still can't duplicate the change in clipping indicators after selecting another image, so it may be unique to certain camera models and/or lighting conditions.
SUGGESTION
Try one of the image files that exhibits this issue using the following PV2102 Tone control adjustment procedure:
Start with all of the Tone controls at their default 0 settings and adjust them from the top-down in the order shown below.
Set Exposure to correct midtone brightness ignoring the highlight and shadow areas for now. Setting Exposure slightly higher (+.25 to +.50 EV) than what looks correct for the midtones seems to work best with most images.
Leave Contrast at 0 for now. It’s usually better to adjust this after the first pass.
Adjust Highlights so that blown out areas are recovered and “fine tonal detail” is revealed.
Adjust Shadows to reveal fine detail in dark areas. For most normal images simply setting +Shadows = -Highlights (Example +50 and -50) works very well.
The Whites control sets the white clipping point, which you can see by holding down the ALT key as you move the slider. Adjust it to the point where you see clipping appear with the ALT key.
The Blacks control sets the black clipping point, which you can see by holding down the ALT key as you move the slider. Adjust it to the point where you see clipping appear with the ALT key.
Now go back and adjust the Contrast control to establish the best midtone contrast
If necessary “touch-up” the controls using the same top-down workflow.
If the issue persists I suggest Exporting an image to DNG file format with the settings that exhibit the issue and post it to Dropbox or other file download site.

Why the "Actions" does not save the Overprint Black

Hi!
Ai CC 17.0.0
Why the "Actions" does not save the Overprint Black?
I can not create an action that will automate this time a very common activity?
Why?
Best Regards!

I was just able to. I am in Illustrator 6 on a Mac OS 10.6. I started a new action and went through the menu just like your screen shot, chose my options and clicked ok, then stopped recording the action.
I found to use the action I had to have something selected.
I see that you are in Illustrator CC, perhaps there is a difference there. But for the record, on my system, it worked.

JNI generated header file does not match the class file

We have had a JNI project for many years and all has been fine. Within our libraries we have several classes that have inner enum classes.
Recently we have moved to JDK1.7. Up to now when JNI generated the methods where the signature used the inner enum class, and it was an oveloaded method, we would get something like the following as the signature:
Java_PackageName_ClassName_methodName_OuterClass_00024InnerEnum_2
And the class file result of the build would look like the following:
methodName(OuterClass$InnerEnum)
Since we have moved to JDK 1.7 the header file looks like the following:
Java_PackageName_ClassName_methodName_OuterClasss_InnerEnum_2
The class file is still the same, and because of that when we run the program we get an UnsatisfiedLinkError. I understand that this error is because the VM cannot find the implementation. So why JDK 1.7 generates a header file that does not match the class file?
Thank you in advance.

I don't have 1.6 to verify but your statements about what is generated for 1.7 for the header appear correct.
The 000024 represents the '$' and for 1.7 the inner class is still named using '$'. So for example after compiling in 1.7 the inner class file is named the following...
MyClass$InnerEnum.class
So a one to one conversion should have kept the 000024 (presuming it does in fact do it that way in 1.6.)
You might want to look at the release notes for 1.7.
If you need a solution you could add a post javah step that renames the file.

CS5: double-click on file does not open the file

If Photoshop is closed, double-click on a file will always successfully launch Photoshop and open the picture.
If Photoshop is running, double-clicking on a file will activate Photoshop, but very often the file does not open. It works from time to time though, and that seems to be on a random basis.
Opening a file through the Open command will always work.
I am working with 10.6.3 on a loaded Mac Pro.
Did anybody experience this difficulty? Any help would be appreciated, before I take more drastic measures like reinstalling the software of worse than that. I've already done the usual maintenance operations.

Marian Driscoll wrote:
Caustic waltz, while brief, may have hit the nail on the head. If you do not want to continue this thread, you can search the forum for existing posts about Snow Leopard and file-program association confusion. Snow Leopard changed some things and that might be your issue.
More simply, do your image files have extensions? (.PSD, .JPG, etc...)
Hello Marian:
While browsing through my Adobe account, I saw that you took the time to leave a comment two days ago. While it did not solve my problem, I will mark your comment as "helpful" for several reasons. It could have been a cause. And I will add politeness, courtesy and language precision. I'm an old guy and I quite value those elements.
True, Snow Leopard changed changed the way files are associated to applications. Thank God! Here in our small office, we do a lot of cross-platform transfers and finally it works seamlessly. A good description of the new file identification system can be found here.
Now, here are the reasons why Snow Leopard cannot be put at fault in my case:
• If Photoshop CS5 is not launched, double-clicking on any psd, tiff or jpeg file will launch it and open properly.
• If Photoshop CS5 is already running, double-clicking on any psd, tiff, or jpeg file will activate Photoshop CS5 but will not open.
This points at either a bug or damaged Photoshop CS5, or maybe a damaged OS. Don't forget that out of maybe a hundred apps, this is the first time I meet with that problem. Of course, the easier course, but by no means guaranteed to work, is to presume that Photoshop CS5 is damaged or that its installation did not work properly. So I did the following things:
• I deactivated Photoshop CS5 and uninstalled it.
• I ditched all remaining files related to CS5, CS4, CS3, CS2, CS... yes I know, but then you know as well as I do0 that getting really rid of Photoshop is a daunting task. It took me almost two hours, but I am reasonably sure that the cleaning job was complete.
• I reinstalled Photoshop CS5.
Now everything works just fine at least for the time being. Time will tell, of course, but I think that the problem is solved.
Regards

Read It Later plugin does not save the tags for web sites all the time

Read It Later does not preserve the tags assigned to websites in some cases. Sometimes I go through the list, assign tags, close the browser hoping it would write all the changes to the internal database (readItLater.sqlite) and after reopening the browser, some sites have the tags and some don't.

@Swarnava. Thank you, but for now I would disregard your response, since I'm not planning to upgrade and I've seen posts where people have the same issues with the latest version of 8.0.1

TS1398 ipod touch does not save the password of the wifi

my ipod touch 4g does not save my home wifi password but in my bussines it does please help

Two things to try:
If your router is set to hide its SSID (network name) then go into the router's administration and change this setting. For some reason, this can cause problems with iOS devices remembering the network password. There's really no need to hide your network name, there are (or were) apps that could show you any and all Wi-Fi networks within range, even if they're hidden.
If you're using WEP encryption, try using WPA2. It is much more secure and seems to play nicer with iOS devices.

Can't open Illustrator file - "does not have the correct number of operands..."

Right off the bat - Mac, 10.6.8, Illustrator CS4. I've seen different variations of this "...correct number of operands..." error on these boards, with fonts and other things as the culprit, but I haven't come across this specific issue yet. If someone has seen something along these lines please let me know.
I work for a small design agency that uses Illustrator CS4 on a consistent basis. We have had an ongoing issue where random files that had been working fine will sporadically become corrupt, causing us to have to use the Document Recovery Mode and then edit the file in a text editor to fix the problem which does work for this issue flawlessly, other than the headache of having to do this repeatedly.
Our workflow is such that we use a local area storage RAID which everyone uses to access the same client files. These client files are all in a series of nested folders we employ to keep all our separate client's work separate. The error arises when certain images are placed into a document, then the document is saved and closed. Upon trying to reopen the file we get an error message like this:
Where the string "/CR0050_ret.psd" is the filename of the offending image. Basically what has happened is that in the actual code for the document, there is a string that starts as "%%IncludeFile....." which specifies the file's pathway on the local area storage we use. The last segment of that string is the image's filename, which has gotten returned to the next line down, and now the program cannot interpret that line in the code, so it cannot properly open the file. The file will open but only the content that is above the offending IncludeFile string is visible.
(client information blurred out)
This does not happen to all the "%%IncludeFile" strings in the document, and does not happen for all images on our local area storage. We know how to fix the problem through the Document Recovery mode and then editing the text. Once we return the filename portion of the code back up to the proper line, and save the file in the text editor, the file will open in Illustrator and show all the information contained within properly. However, if you save the file out again without making any changes, the same errors will propagate throughout the file's code again, and become unreadable prompting another document recovery. Insert endless cycle here.
What we would like to try and find out is why is this happening, so we can prevent it from happening in the future. Is the image nested too far down in the hierarchy of folders? Are there too many characters in the file pathway string? What can we do to keep this from happening moving forward?
I know that an easy answer is to copy the files over locally to our hard drives, and work from there, but this is not a very efficient way to work, as we are all collectively working on different files, utilizing common image resources. We like to keep one set of images so there is no duplication that may lead to the wrong image being sent out - "Oh you sent John's version? You should have sent Molly's version of the image for that file"
We also downloaded the trial version of Illustrator CS6 to see if an upgrade would work wonders, but it does not, the problem persists when saving a recovered file in CS6.
Any thoughts? Thanks in advance.
ABK

In Illustrator it is generally not a good idea to read and write directly to and from a server: http://helpx.adobe.com/illustrator/kb/illustrator-support-networks-removable-media.html
If you really think you need to do it, then check your network thoroughly.

Save File: Does not save my file to the chosen location

When the window pops up for the save location of a file, select location, and save. Navigate to the save location and the file is not there. cannot find the file via a search. Also does not remember last save location, but there is not entry in the about:config to set lasDir. 29.0.1.

Assuming you are saving the file in a normal window (not a private window), can you use the download history to locate the file? Either click the arrow on the toolbar or press Ctrl+j, then assuming the download is listed, click the folder icon at the right side to open the folder containing the download. Any luck?

The jsp file does not open the new login window but opens the source code.....plz help

When i try to log in to the log in link at the site https://efp.bpcl.in the log in page does not open but the firefox wants to ask with which program the firefox should open the file and when we give firefox or internet explorer than it opens the source code.Plz help...

Those files are send as application/octet-stream and that makes Firefox display a download dialog.
http://developer.mozilla.org/en/docs/Properly_Configuring_Server_MIME_Types

When I click an email link, Yahoo Mail launches but it does not open the message composition window. How can I get it to automatically open the message composi

Windows XP

Hi wayner,
Thank you for your question:
In the Firefox > Options menu under Applications, search for "mailto". From there select the action drop down and select the action.
If you click on the details of the action it should have https://compose.mail.yahoo.com/?To=%s
This macro should take you to a compose mail if you are logged in.
If the above information does not resolve your issue, please consider creating a new thread containing the specific details of your issue.
Doing so will allow the Mozilla volunteers to give you solutions that are more helpful to you. This may help them to solve your problem faster and more efficiently.
Please, feel free to post the link to your thread on this thread for volunteers interested in assisting you.
Thank you.

On saving mail as .rtfd file does not save the attachments.

Similar Messages

Maybe you are looking for