On SCVMM 2012 R2 While adding Loadbalancer with NSVPX-HyperV-10.1-119.7_nc, the Retrieve-LBSystemInfo test fails with Error 21426

Hi,
I'm trying to add Citrix LoadBalancer (NSVPX-HyperV-10.1-119.7_nc) in VMM 2012 R2 and on click of test button, only the "Retrieve-LBSystemInfo" test is failing with Error Code 21426 and exception as below. Whereas, rest of
the test are getting passed.
Can anyone please let me know whether am I missing anything? FYI, I configured citrix lb as per blog: http://kristiannese.blogspot.in/2011/07/load-balancing-and-cloud-computing.html

Your problem sounds similar to this one, except that they're using software raid rather than just pure LVM. If you're using an initrd, you may not have the appropriate modules installed. If you're not using an initrd, then the kernel probably needs LVM support compiled in (not as a module) and could be solved by fixing that. I have never used the ck-patchset, but this should give you an additional data point.
Also comment=systemd.automount will be deprecated soon as I understand it; if you have a need for automounting, x-systemd.automount should be used instead.

Similar Messages

While adding localization for appstore meta data, I cannot find the language Polish (Polski)

While adding localization for appstore meta data, I cannot find the language Polish (Polski) under the option Choose another language: in iTunes connect.
I am updating the app to a newer version. I need to show the App description etc in Polish too. But I can't fnd the Polish in the list of languages that can be
added. Screen shot of languages is attached.
Thanks.

Hi,
According to your post, my understanding is that you have an issue about adding attachments to list items in app.
To add attachment to list item in the host web, we should first get the list and the list items from the host web, then add the attachments to the list items.
There are two articles about retrieve the list and list items in the host web, you can refer to them.
http://www.dotnetcurry.com/showarticle.aspx?ID=1028
http://www.c-sharpcorner.com/UploadFile/93cb27/retrieve-sharepoint-app-host-web-list-items-in-sharepoint-ho/
What’s more, we can also use the REST API to achieve the same scenario.
http://www.c-sharpcorner.com/UploadFile/472cc1/add-attachments-to-list-items-in-sharepoint-2013-using-rest/
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Does the Apple Hardware test come with Snow Leopard?

Does the Apple Hardware test come with my iMac 27" i7?
If so, how is this activated and is it used as a periodic test or only when a problem develops?
Thanks

The Hardware Test will be on the Install DVD(s) that comes with your iMac. With the correct DVD inserted, (re)start the iMac while pressing & holding the "D" key to start into the HT. Run it anytime you want to check the hardware.
Dah•veed

After updating with IOS7, i can no longer control the music on my iPhone with my car controls. I have deleted the phone and re-synced it twice????

After updating with IOS7, i can no longer control the music on my iPhone with my car controls. I have deleted the phone and re-synced it twice????

Go here: http://www.apple.com/feedback/iphone.html and report it with as much detail as possible.

After upgrading to IOS 8 on my iPad I constantly get a temperature warning despite the fact it is cool. Did not happen with IOS 7. I have restored the iPad to factory settings with the problem not resolved.

After upgrading to IOS 8 on my iPad I constantly get a temperature warning despite the fact it is cool. Did not happen with IOS 7. I have restored the iPad to factory settings with the problem not resolved.

Hey, I've got the same problem. Did you find any help or solution by now?

I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio

I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio 2013?

For MS Visio (any version) only the appropriate version of Acrobat *PRO* provides PDFMaker for Visio.
For Visio 2013 specifically you must have Acrobat XI Pro (updated to at least 11.0.1).
See:
http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
Be well...

[svn] 1013: Bug: LCDS-180 - [WebLogic 10.1 on Suse9] MxUnit Dynamic destination "SecurityEmployeeUser" test fails with a NullPointerException

Revision: 1013
Author: [email protected]
Date: 2008-03-28 17:24:25 -0700 (Fri, 28 Mar 2008)
Log Message:
Bug: LCDS-180 - [WebLogic 10.1 on Suse9] MxUnit Dynamic destination "SecurityEmployeeUser" test fails with a NullPointerException
QA: Yes
Doc: No
Details:
This prevents the NPE but for non-servlet endpoints you need to be sure to define your users/roles in Weblogic's default security realm. The test was failing because login was failing, most likely because the regression server wasn't fully configured.
Ticket Links:
http://bugs.adobe.com/jira/browse/LCDS-180
Modified Paths:
blazeds/branches/3.0.x/modules/opt/src/weblogic/flex/messaging/security/WeblogicLoginComm and.java

Hey guys, This is the problem. My father just got an iPhone 5. He has a Macbook Pro 2009 with OS X 10.5.8. The iPhone is not compatible with this version since the iTunes is an older version as well. At our local Apple store in my home country, they told

Hey guys,
This is the problem. My father just got an iPhone 5. He has a Macbook Pro 2009 with OS X 10.5.8. The iPhone is not compatible with this version since the iTunes is an older version as well. At our local Apple store in my home country, they told him he needs to upgrade (which I agree of) but that the memory of this computer is not enough to hold the newer OS.
Please help, he does not really agree with buying a new computer just because of the versions.
Thank you, I appreciate your help.

This is what I have. Thank you so much rdr4lfe.

The AcquireConnection method call failed with error code 0xC0202009.

I've seen the previous threads on this (although maybe not all of them). However, i don't think I'm getting the error for the same reason. The full error I'm getting is:
- Pre-execute (Error)
Messages
Error 0xc0202009: {F1B3B35C-FAE3-48F6-A169-4E4D8D99F9B6}: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft JET Database Engine" Hresult: 0x80004005 Description: "Unspecified error".
(SQL Server Import and Export Wizard)
Error 0xc020801c: Data Flow Task: The AcquireConnection method call to the connection manager "DestinationConnectionExcel" failed with error code 0xC0202009.
(SQL Server Import and Export Wizard)
Error 0xc004701a: Data Flow Task: component "Destination 64 - production_effectivities" (7042) failed the pre-execute phase and returned error code 0xC020801C.
(SQL Server Import and Export Wizard)
The entire package is running on one machine. The data source is SQL Server 2005 and the destination (this happens with both of them) is Excel or Access. Either way I cannot get the package which the wizard generated to run at all. This error occurs after the first table is exported. I'm running on WinXP SP2 with 2005 Developer and ALL components installed except analysis services.
Anyone else have this problem or know the solution?
Jeff

I am getting the same error. My Destination and source both are on SQL Server 2005 on the same box.
I am using SQL- Code for Source and and table as destination. When the package runnes under Transaction- TransactionOption-Supported then the packages excuted fine but it fails when i change the Transaction- TransactionOption to Required.
It fails with following error code.
[OLE DB Destination [22]] Error: The AcquireConnection method call to the connection manager "FMFCLSQADB01.DWH_Rakesh" failed with error code 0xC0202009.
[DTS.Pipeline] Error: component "OLE DB Destination" (22) failed the pre-execute phase and returned error code 0xC020801C.
[Connection manager "FMFCLSQADB01.DWH_Rakesh"] Error: The SSIS Runtime has failed to enlist the OLE DB connection in a distributed transaction with error 0x8004D00A "Unable to enlist in the transaction.".
[Connection manager "FMFCLSQADB01.DWH_Rakesh"] Error: An OLE DB error has occurred. Error code: 0x8004D00A.
When i change the source SQL query to Table or View then it works fine.
Thanks for any suggestion.
Regards
Rakesh
Now, my issues related to “SSIS Runtime has failed to enlist the OLE DB connection in a distributed transaction with error 0x8004D00A "Unable to enlist in the transaction."…..”. are fixed.
This is one of the very common errors that comes up in SSIS (SQL Server Integration service)
I have faced this issue for at-least two occasions. Both of them have one common setting: “TransactionOption” was set to “Required”.
In first case, I had multiple dataflow tasks but there were no sequence given. There were no error if I ran the package with TransactionOption=Supported. But when I ran the package in TransactionOption= Required, it got failed.
To fix the issue I have changed my package and put the entire dataflow task one after another (connected thru Constraint).
In another case, where I was doing data transfer from one server to another, I had to configure the MSDTC.

Hi i'm trying to delete my bulk mail messages but it keep telling me this message"The IMAP command "DELETE" failed with server error: DELETE failed - Mailbox is reserved "

Hi i'm trying to delete my bulk mail messages but it keep telling me this message"The IMAP command “DELETE” failed with server error: DELETE failed - Mailbox is reserved " is there any way to delete of stop messages from coming into it ??
thanks

Sounds like the mail server thinks you are asking to delete the bulk-mail mailbox instead of some/all of the messages within it.
How are you trying to delete your bulk mail messages? That is, what are you doing, step by step, up to the error message.
What you should probably be doing is selecting the bulk mail mailbox, selecting one of more messages inside it, then hitting the "delete" key.

My Mac is doing strange things: delaying between users, mouse flickering and bouncing, gets stuck with rainbow wheel flickering. I ran the appel hardware test and it detected an error: 4MOT/4/40000003:HDD-1233 Does anybody know what that means? HELP!

My imac is doing strange things:
-delaying between users: when closing session it goes to blue, then takes a while to appear users signin box, and then wont recognize mouse command to enter until a couple of minutes later... then everything seems alright until....
-it gets stuck between things, the rainbow wheel appears and its just delays there forever....
-and every now and then the mouse starts flickering and bouncing wildly onscreen.
I ran the appel hardware test and it detected an error:
4MOT/4/40000003:HDD-1233
Does anybody know what that means? HELP!

WZZZ answered about where to get iStat. And do check the SMART status. If it is an overheating problem due to a fan or logic board problem, your hard drive is possibly cooking itself to death. If so it isn't a faulty hard drive even though the hard drive might fail. So assuming it's a temperature problem, even if you are able to repair things on the disk with software, that is working on symptoms, not causes. I could be wrong however.
RE: AppleCare: Your iMac came with one year of AppleCare (Apple's warranty program), but within the first year you can buy 2 more years. You have to extend by the one year anniversary of purchase of the computer. Your 10,1 is too old to still be in the first year, and since you asked what it was, I'm sure you don't have it. Bottom line meaning is that whatever this problem turns out to be, you'll have to pay for it. Unless there is something like this. It is for 2011 iMacs with certain Seagate drives. You can put in your serial number for fun, but it looks like yours is too old. Lastly, some people have had Apple help them anyway if it is just out of warranty, but many have not. Your machine is one of these. Type in 10,1 in the search box. Is there an Apple Store near you? Just b/c it's out of warranty doesn't mean you shouldn't have it looked at by Apple. But no one here can say at all what Apple will or will not do.
Hope you get it taken care of!

CTS1.4.1 Samples JDBC test failing with Error in allocating a connection

Tests under CTS1.4.1 samples>>JDBC>>ee>>testConn>> are failing with the following error :
Sep 14, 2005 4:27:55 PM com.sun.gjc.spi.DSManagedConnectionFactory createManagedConnection
WARNING: RAR5113 : Error creating connection from supplied information: Reason - Error while parsing address
Sep 14, 2005 4:27:55 PM com.sun.enterprise.resource.LocalTxConnectorAllocator createResource
WARNING: RAR5038:Unexpected exception while creating resource
Sep 14, 2005 4:27:55 PM com.sun.enterprise.connectors.ConnectionManagerImpl internalGetConnection
WARNING: RAR5117 : Failed to obtain/create connection. Reason : Connection could not be allocated because: Error while parsing address
Sep 14, 2005 4:27:55 PM com.sun.gjc.spi.DataSource getConnection
WARNING: RAR5114 : Error allocating connection : [Error in allocating a connection. Cause: Connection could not be allocated because: Error while parsing address ]
ERROR: SQL Exception : Error in allocating a connection. Cause: Connection could not be allocated because: Error while parsing address
ERROR: java.sql.SQLException: Error in allocating a connection. Cause: Connection could not be allocated because: Error while parsing address
at com.sun.gjc.spi.DataSource.getConnection(DataSource.java:72)
at com.sun.ts.tests.samples.jdbc.ee.testConn.testConnClient.getConnection(testConnClient.java:252)
at com.sun.ts.tests.samples.jdbc.ee.testConn.testConnClient.setup(testConnClient.java:91)
But the mystery is that the main set of JDBC tests (outside of samples) in CTS1.4.1 are running fine.
One difference I notice is that the tests that are failing use "createManagedConnection".
The main configurations file "ts.jte" present under %TS_HOME%\bin has all the settings correct. Thats why the main JDBC tests go through fine.
I wonder where these failing tests pick up the bad "address" from.
Any help on this would be greatly appreciated.
Thanks !

CTS is a paid product and any question regarding that should be answered by a Licencee Engineer. Pls contact the LE regard the setup of CTS or any TCK.

Simple SSL test: failing with "The certificate is not trusted ..."

WebLogic 10.3.4 on Win7.
I created a new domain and enabled SSL,with listen ports 7001 and 7002 for http and https respectively.
I deployed a trivial webapp whose main page runs in http, but it opens an iframe with https for a different page in the app.
I loaded the main page, but the iframe fails to load, giving the following error:
The certificate is not trusted because no issuer chain was provided.
(Error code: sec_error_unknown_issuer)
What is the easiest path to get this working?

Hi David,
I dont think that the Demo Certificate shall cause the issue.You can enable the SSL debug in weblogic and check what exactly is wrong,while loading the iframe window.
Error code: sec_error_unknown_issuer
Moreover,you can try to add the root certificate to your IE browser and check it
Tools -> Internet options -> content ->Certificates ->
After your import,You can verify the same by checking it from the list and then verify by accessing it again

When forwarding email with Firefox (default browser)the pictures in the email (not attachments) will not open , only shows boxes with a red x on top at the receiver, but when sending with IE, the pictures open, this happens only recently since a week ago.

I forward a message with pictures in it with Firefox, the receiver can not see any pictures, only boxes with a red x, but can read the message.
But when I forward the same message with pictures with IE,
the receiver can see the pictures and read the message too.

When going to a website the picture was small - tried changing the Zoom size , tried Zoom Reset - the text did change size but the layout distorts - found under View - Zoom - Zoom Text Only was checked --- Removed this check mark and the website returned to normal size and Zoom worked normally again. I am 99.9999% sure I did NOT check this myself and there is no one else on the computer to cause it. Maybe this will help.

VI analyzer: Wire under object test fails with Call Library Function Nodes

Hi,
If I wire a Call Library Function Node with an ErrorIn and an ErrorOut, the VI Analyzer Test "Wire under Object" fails always with two occurrences per Call Library Function Node.
A double click to the occurrence highlights the error lines connected with the call... node.
The test does not fail, if the error lines are not connected.
Thanks!
H
Solved!
Go to Solution.

This became a problem when Call Library Nodes got error terminals (and optional path terminals) in LabVIEW 8.20. I should be able to get a fix in to VI Analyzer Toolkit 2010.
Thanks for taking the time to report the bug.
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

On SCVMM 2012 R2 While adding Loadbalancer with NSVPX-HyperV-10.1-119.7_nc, the Retrieve-LBSystemInfo test fails with Error 21426

Similar Messages

Maybe you are looking for