On sleep show white o pink screen, most of the time error on start up win8

hi i got two compter with the same problem, both are (Satellite S855s5382)
1. On SLEEP, 1. lapotp went i close the laptop and then open it the screen turns white or some times show a pink screen
                          2. laptop same problem like the 1 one, but some times show the half of the screen
2. WIN8  , both has error on startup most of the time went i star it take to much to run win8 and then show an erro on start up and show 3 icons an the desktop it is defalut, i restart it and start to check up the hdd then take so much to RAPAIR IT 
for the second error it is only on win8, on win7 i dont have this problem
On win7 the firs problem it is the same

a little difficult to figure out just what all your issues are but I'd suggest making an image of your system and saving to an external drive, then doing a restore back to out-of-box state and see if that fixes things.  If not, post back.
L305-S5955, T9300 Intel Core 2 Duo, 4GB RAM, 60GB SSD, Win 7 Ultimate 64-bit

Similar Messages

  • My imac on OS 10.5.8 is showing near 100% processor usage most of the time. It appeasrs that process SystemUIServer is the culprit using 70% or more of processor time. What does anyone think is causing this ?

    My imac on OS 10.5.8 is showing near 100% processor usage most of the time. It appeasrs that process SystemUIServer is the culprit using 70% or more of processor time. What does anyone think is causing this ?
    What is the purpose of the UIServer module ?
    Is there a good place to learn about the OS modules ?

    Useful information from BDAqua in this thread:
    https://discussions.apple.com/message/22676167#22676167

  • I recently bought the 27" IMac. I have to force shut it down, the menu shut down doesn't work, and most of the time it will start back up on it's own several hours or even days later. Any ideas?

    I recently bought the 27" IMac. I have to force shut it down, the menu shut down doesn't work, and most of the time it will start back up on it's own several hours or even days later. Any ideas?

    Note: No iMac PPC is 27".   PPC is for the iMacs that were new until the beginning of 2006.   They are all Intel now.
    I've requested a moderator move your thread.  No action is needed on your part.

  • Volume icon stays on the screen most of the time

    I have am having a problem with my iPad 2. Normally, if you press the volume button, a symbol appears on the screen showing when the volume goes up or down. This symbols should disappear within seconds. However, this is not the case with my iPad. The symbol is on the screen 90% of the time that I am using the iPad. The volume goes up by itself. I got it checked at a tech store and the technicians said that everything was working properly. If any knows how to fix this problem, please let me know.

    Try a restart - hold the Home and Sleep buttons for arund 7-8 seconds until the Apple logo appears

  • My iphone 3g hang when i lock it and just shows white and red verticle lines on the screen . . please help me out

    my iphone 3g hang when i lock it and just shows white and red verticle lines on the screen . . please help me out

    Try resetting > 
    Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears.
    If that doesn't help, try restoring >  Backing up, updating, and restoring your iPhone, iPad, or iPod touch software

  • Most of the time when I turn computer on I get the white screen and question mark.  Sometimes it will turn on and work but often the spinning disk starts and especially when opening Iphoto and it generally freezes

    Most of the time when I turn on the Mac I get the white screen and question mark appear.  Sometimes it will turn on and work. But often the coloured spinning wheel starts up especially after trying to use iphoto it freezes and a couple of times the screen has then gone black.  The computer seemed pretty warm yesterday when this happened.
    Any suggestions of what I should do to fix it would be greatly appreciated.
    Kate

    See this on the question mark when you start up: http://support.apple.com/kb/TS1440?viewlocale=en_US
    See this on the spinning beach ball: http://www.thexlab.com/faqs/sbbod.html

  • When I try to Home-Share It works most of the time. It will always show up, but sometimes I tap on the icon of my library then it wont load, I restart my computer, IOS Divice and my router It still wont load my Library .... WHY!

    When I try to Home-Share It works most of the time. It will always show up, but sometimes I tap on the icon of my library then it wont load, I restart my computer, IOS Divice and my router It still wont load my library. I even went and tried to reinstall Itunes and everything nothing works.

    Hi,
    /Users/sarahschadek/Desktop/Safari.app/Contents/MacOS/Safari
    Move the Safari app from the Desktop to the Applications folder.
    Restart your Mac.
    That's why you see this:
    When I try to do the updates my computer says it has ready it goes through like it is downloading them then at the end it says some of the files could not be saved to "/" files.
    After your restart your Mac, click the Apple  menu (top left in your screen) then click:  Software Update ...
    Carolyn  

  • I had my iphone 5 replaced at the apple store as of a broken sleep button and i was wondering if they would replace again as i think it may of happend again as it works most of the time but theres an odd click where it wont work.

    I had my iphone 5 replaced at the apple store as of a broken sleep button and i was wondering if they would replace again as i think it may of happend again as it works most of the time but theres an odd click where it wont work.

    Yes.

  • Why does Word in the dock shows only Force Quit not Quit most of the time

    Has anyone experienced problems with having Word in the dock that will not show Quit and only  Force Quit most of the time when I put the cursor on W.  No problems with other closing apps located in the dock.

    Support for Microsoft Word - Microsoft Support

  • Pop3 account sometimes shows mails / folders, most of the time does not

    Hi,
    I have 2 mail accounts set up on my iphone: A mobileme one, which works reasonably well, and a POP account.
    Sometimes when I go into the POP account I see and Inbox and a Sent folder, and the inbox is full of my mails.
    But most of the time when I click on the POP account I just get a blank screen and "Connecting..."
    Is there anything I can do to fix this? At least I'd like to see the mails I've already received.
    Thanks,
    Tom

    The Mac Firewall in Leopard has three settings
    Allow All which is effectively Off
    Allow Essentials which allows certain prescribed services only.
    And Allow Specific Applications and Services. You need to add whichever things you want to work with the internet by application or service even if it uses a port you know is used by something else.
    For instance - If you had iChat and AdiumX both of which log on to the AIM servers on port 5190 by default you have to allow both apps in the Specific Section list (the same if you change their Login ports both to 443
    Now there seems to have been a problem at the OS 10.5 to 10.5.1 change over.
    It seems that the OS is holding on to the 10.5 setting (which in fact may not be working at all)
    Therefore use the - sign at the bottom of the list to remove any item that was there before the 10.5.1 update and then set the firewall to Allow All and then set it back again and use the + sign to re-add applications.
    The Firewall will work on whichever connection the Mac has to the next device in line, towards the internet.
    Thanks for the points
    7:23 PM Tuesday; December 18, 2007

  • My icloud emails arent arriving most of the time and a few days ago my iphone and ipad started showing "Can't Get Mail" box. This has not happened before since I set up the iclud email address with the purchase of my ipad about a month ago.

    My icloud emails arent arriving most of the time and a few days ago my iphone and ipad started showing "Can't Get Mail" box. This has not happened before since I set up the iclud email address with the purchase of my ipad about a month ago.

    That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
    So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
    But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it...

  • Hdisk0 and hdisk1 is showing 100% busy most of the time

    Hi,
    hdisk0 and hdisk1 is showing 100% busy most of the time.During 100% busy database and application goes hang even a simple sql query or simple os command(ex: ls -lrt) takes long time to execute.whereas hdisk0 and hdisk1 not hit where oracle home and oracle datafiles is located.hdisk0 and hdisk1 hit /var,/tmp,/usr,/opt etc.
    Regards,
    Sajid

    What OS ?
    --AIX 5.3
    What database version ?
    --10.2.0.4.0
    What kind of filesystem ?
    Filesystem GB blocks Free %Used Iused %Iused Mounted on
    /dev/hd4 1.00 0.95 6% 1975 1% /
    /dev/hd2 4.00 1.45 64% 39807 11% /usr
    /dev/hd9var 2.00 0.94 53% 577 1% /var
    /dev/hd3 6.00 3.13 48% 4401 1% /tmp
    /dev/hd1 1.00 0.90 11% 234 1% /home
    /proc - - - - - /proc
    /dev/hd10opt 0.25 0.18 29% 1284 3% /opt
    /dev/fslv00 750.00 198.92 74% 1620391 4% /vol01
    /dev/fslv01 460.00 200.18 57% 524775 2% /vol02
    /dev/fslv02 185.00 44.46 76% 440425 5% /vol03
    What is on those disks ?
    rmsdb:/>lspv -l hdisk0
    hdisk0:
    LV NAME LPs PPs DISTRIBUTION MOUNT POINT
    hd10opt 1 1 00..00..01..00..00 /opt
    hd1 4 4 00..00..04..00..00 /home
    lg_dumplv 8 8 00..08..00..00..00 N/A
    hd5 1 1 01..00..00..00..00 N/A
    hd8 1 1 00..00..01..00..00 N/A
    hd6 77 77 00..77..00..00..00 N/A
    hd2 16 16 00..00..16..00..00 /usr
    hd4 4 4 00..00..04..00..00 /
    hd3 24 24 00..00..24..00..00 /tmp
    hd9var 8 8 00..00..08..00..00 /var
    rmsdb:/>lspv -l hdisk1
    hdisk1:
    LV NAME LPs PPs DISTRIBUTION MOUNT POINT
    hd10opt 1 1 00..00..01..00..00 /opt
    hd1 4 4 00..00..04..00..00 /home
    lv02 7 7 00..07..00..00..00 /mkcd/cd_images
    loglv01 1 1 00..01..00..00..00 N/A
    hd5 1 1 01..00..00..00..00 N/A
    hd8 1 1 00..00..01..00..00 N/A
    hd6 77 77 00..77..00..00..00 N/A
    hd2 16 16 00..00..16..00..00 /usr
    hd4 4 4 00..00..04..00..00 /
    hd3 24 24 00..00..24..00..00 /tmp
    hd9var 8 8 00..00..08..00..00 /var
    What database processes are running ?
    --As i observed while running oracle batch running
    Did you look at memory and cpu and swap usage at the OS level ? Did you look at what OS process is using the most resource ?
    --I use topas to look this but i did not get,How can i look what os process is using the most
    resource?
    Did you run a statspack or awr report on the database to identify what is running ?
    --Nohting as Oracle support said
    Regards,
    Sajid

  • My iphone shows apple only in screen what is the problem?

    my iphone shows apple only in screen what is the problem? i can not open it

    Try a reset:  hold the on/off switch and home button simultaneously until the phone reboots--may take up to 20 sec.

  • I use photoshop cs2 - When i use the sketch filter - photocopy on a jpg/psd it comes up plain white (most of the time)

    I use photoshop cs2 - When i use the "sketch filter - photocopy option" on a jpg/psd it comes up plain white (most of the time). Once in a while it works..   Can anyone give me a hint on how to fix this or a hint on what I'm doing wrong.

    Those filters work best when the foreground and background colors in the toolbox are different.
    Try pressing the D key on your keyboard to set the defaults of foreground Black and background White and then try the Filter>Sketch>Photocopy.

  • Hi, when i plug my iPod mini into my lap top nothing shows up on my screen but yet the device still charges? help

    hi, when i plug my iPod mini into my lap top nothing shows up on my screen but yet the device still charges? help

    Hello rkguy71,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    iTunes: iPod not recognized in iTunes and Mac desktop
    http://support.apple.com/kb/ts1410
    Have a nice day,
    Mario

Maybe you are looking for