On start up sometime only 3/4 of desktop is showing. I restart and everything is fine. Same problem when opening lid, sometimes I get 3/4 screen showing. Any solutions?
3/4 screen of desktop showing at start up and opening lid. How to fix this please. Restart usually shows full screen of desktop.
Ron
Hello mastertaster,
It may help prevent the loss of the lower quarter of your MacBook Air's display should you reset your system's SMC and NVRAM.
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
About NVRAM and PRAM
http://support.apple.com/kb/HT1379
Cheers,
Allen
Similar Messages
-
On start up sometimes I get a blue screen and start up hang there
On start up I sometimes get a blue screen and it hangs there the only way to get out of this is to turn the iMac off at the back then when you turn it back on the desk top appears without going through the startup screens. Even had the blue screen when starting in safe mode.
Then run Apple Hardware Test in Extended Mode, it's possible you have a hardware issue. If you still can't locate the issue the next step is taking the machine in for a professional diagnosis at your local Apple Store or AASP.
-
This is not correct solution. I have fresh/new copy of Windows 7 64 bit and I have the same problem.
Autorun only shows the Apple Bonjour service. It started when try to sync more than one iphone over WiFi. I have two iphones and an iPad. I turned off syncing over WiFi and still has high CPU utilization. One of the CPU's is pegged at 100%. It is the AppleMobileDeviceService.exe process.For the record, I then followed the suggestion of MarcDCMB in https://discussions.apple.com/thread/4291206 of just manually restarting the Apple Mobile Device service in Windows services.msc once each time after starting iTunes and the service no longer hogs CPU after that service restart. Not too painful as a work-around, and apparently an effective one, but clearly not a solution to the problem. Again, as above, all the other solutions didn't work for me and I have no conflicting software as far as I can tell. So you'd have to say this Apple's problem.
Also FTR, I am still on the 5.2.0.6 version of the Apple Mobile Device Support MSI and I don't know if that is relevant to this work-around working but my sense is that it is NOT relevant. I'll report back on this thread if I re-upgrade and the problem returns in spite of the service-restart approach. -
The only way to get lion to start is to hold the eject button down, otherwise I just get a white screen. Any cures?
this is what I'm running on ?
Processor 2 x 2.8 GHz Quad-Core Intel Xeon
Memory 12 GB 800 MHz DDR2 FB-DIMM
Graphics NVIDIA GeForce 8800 GT 512 MB
Software Mac OS X Lion 10.7.2 (11C74)thanks,
I tried and it worked once, then went back to the white screen, so I'm back to hollding down the eject button.
thank you anyway.
K -
In safari browser cookies is working fine. But when I add the browser url to the screen then the cookies concept is not working. In safari setting cookies is always open only. Can you please provide any information regarding to this?
Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
''(If you're using an added theme, switch to the Default theme.)''
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item:<br>
[[Image:FirefoxSafeMode|width=520]]<br><br>
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.
Thank you. -
My new iMac has recently had OSX Lion installed on it and now when I start the machine it looks like its updating something every time, and the wireless doesn't work. So I restart and everything is OK - until I have to start up again the next time - then I have to repeat this again! Any help appreciated.
I've been having the same issue, but have just discovered something on my own that hasn't been pointed out in any of the forums I've visited. In what I thought would be a vain attempt to help myself, I went to System Preferences, Users & Groups, and then clicked on Login Items. I discovered that one of the Items that was listed to open automatically upon login was iTunes Helper and that there was an exclamation point beside it indicating that it was incompatible. I simply deleted that item and now I don't have the situation you described and my wireless is connected. Hope this helps!
-
about a month ago, Mavericks had an automatic update. I have a Windows 7 partition bootcamped on my macbook pro. Before the update, everything was fine. Now, when I attempt to start Windows partition, as soon as I touch the keyboard or mouse the screen goes black and I can't go any further. I have tried to re-load the bootcamp drivers and try again. It does the same thing. Any help would be great.
i sue windows 7 and my orignal macintosh formated and get online same window
-
I ran an iTunes update. It failed with the message "System Error. The program can't start because MSVCR80.DLL is missing from your computer. Try reinstalling the program to fix this problem." I tried reinstalling but get the same message. I looked in my Recycle Bin for that file name but there is none there. Is this a new file that iTunes wants?
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99683) -
My gmail doesnt load on my macbook pro anymore, only able to fully load with the html version. Anyone share the same problem?, My gmail doesnt load on my macbook pro anymore, only able to fully load with the html version. Anyone share the same problem?
It loads till the almost the end of the bar and just stops there.I'm having the same problem. It just freezes and wont load the rest of the way.
-
My Mac suddenly started getting a pop up message saying "There was a problem conecting to the server. URLs with the type "file" are not supported." My internet is working fine,no problem connecting. I just keep getting this message which I click off and continue working.
Open the Time Machine pane in System Preferences. If it shows that Time Machine is ON, click the padlock icon in the lower left corner, if necessary, to unlock it. Scroll to the bottom of the list of backup drives and click Add or Remove Backup Disk. Remove all the disks, then add them back. Quit System Preferences. Test.
-
Hi all,
Finished editing a short movie.
Then went to share on vimeo but got this message - see also screenshot when I tried to export to desktop.
Problem when exporting to Vimeo I get message "The share operation has failed. Quicktime error: -50" The file only gets to 8%.
Have tried deleting my render files for the project and also another fix mentioned of deleting any black space files on the edit itself but neither work?
Just upgraded to OS Mavericks could this be causing it? If so how to downgrade?
thanks
Louis BThanks for your help both, I called Apple tech support and spoke to a really helpful chap called Andrea who helped me out. Now got my Master file sorted and am trying Vimeo upload again.
Just to clarify points for people out there with the same issue:
First steps
- Ensure background rendering is turned off in preferences
- Delete project and events render files
- If upgraded to Mavericks then go to FCPX in finder under applications hit buttons 'CMD' and 'I' together and tick the 'prevent App Nap' box.
Next Steps
I had already done all of this when Apple Tech spoke to me so we discussed the message 'Quicktime -50' and what it meant. It wasnt a purely generic error message but was not detailed enough to point to one specific issue. This problem had occurred in previous years (so Mavericks not wholly to blame) and patches were issued over the years by Apple to help resolve some of the problems.
The message essentially is indicating that there is a problem somewhere with the media in some way shape or form.
My export went to 8% then failed. Apple's answer was that the project settings were corrupted in some way.
So what they suggested (so simple I could kick myself) was to select all the media files by 'CMD + A' then copy them 'CMD + C' then create and open a new project timeline, and then paste in 'CMD + V'.
Then we tried export again this time to a master file with some settings detailed by Apple.
The difference now was it got to 40% then failed but due to a different reason 'error -1 frame 10124 error'
At last we get past the project issues and into the event media issues, it seems that when I loaded the compact flash last night, the iMac kept ejecting the reader so had to copy files over quickly and seems that some of the file clip I used although showed on the viewer, didn't seem to have loaded all the correct media, so selecting this clip frame 10124 on the viewer I found that it showed as red on the frame row which implied an issue. So I simply bladed it off and deleted it.
Then I reran the export to Master file and it worked, though jumping from 40% to 100% complete was a shock to me!
Now am trying the export to Vimeo - hope this helps some of you out there. Worst case pick up the phone to Apple and speak to the Final Cut Pro guys they can help.
best wishes,
Louis B -
I cannot send emails, only receive, after upgrade to Yosemite today, Apple should resolve this issue. Any help more than welcome. Thanks
in response to Pita Fito
I have contacted three more people that made the upgrade and they have the same problem. My advise is not to upgrade until Apple solves the serious issue, I would hate to have to re-install Outlook...I can send e-mails just fine with apple mail on yosemite...
Might not be a generic problem but rather a personal problem..
You should try find a fix rather than waiting on apple.
Hopefully somebody can help you out.
More than happy to help with your settings/preference pain... And compare mine with yours...
If you send some screenshots... I can send you my equivalent... So maybe you can figure it out.
Is it a gmail or icloud email acount? Can be of more help if it is. -
When I plug in my headphones into my imac only the right side plays music. I tried with other headphones and still has the same problem. I tried the headphones with other devices and they work properly. Can anyone help me with my problem please?
Macs have crazy headpne jacks in different models.
So we know more about it...
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
Hardware Overview:
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 6 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version (system): 1.21f4 -
SOmetimes I get a blank screen on my nokia N8 whil...
SOmetimes I get a blank screen on my nokia N8 while receiving calls. Because of that I can't see the answer button and can't pick up the call. I have to lock and then unlock the phone via hardware switch and it will show the screen. It usually happens around 30-40 % of the time.
Do you think its a software issue (some application problem) or something wrong with the phone... Please adviseWhen you put the phone up to your ear, the proximity sensor should turn the display off to save battery. With my phone it comes back on the moment I move it away from my face.
Do you have the camera in a case? I wonder if the case is maybe obscuring the proximity senser which is next to the front camera? -
I just bought an iPhone 5c but siri doesn't work when I press the home button only raise to speak works! Siri is activated and everything any help?
Press and hold Home until it beeps.
Then let go and speak. Or contune to hold and speak and let go when finished speaking.
Maybe you are looking for
-
Deleting itune music selection from iweb site
(New & non techie) iWeb Q: Dragged itunes music sel. onto first page of iwebsite. Gray box that went on top of page then eliminated first-page photo in background. Went through "Inspector", Quick time, but could not get it to work.(song play) Would l
-
frozen ipad mini
-
Hi, I am wondering if it is possible to lock a document on my computer. My siblings tend to delete and/or open files and mess around with them. They do have an extensive knowledge of Linux and their actions are more of malice. I am wondering if it wo
-
Users (ro) recieve subscription mails even before the resource is published
Hi, I have a folder with the time-dependant publishing, approval process & subscription services. I have two groups: the Authors Group (Full control on services & permissions) and Readers Group ('read only' on permissions & 'subscribe my self only' o
-
after system update to 17r25. 1-011-11-ww sound became bad,no bass and treble.DTS.sound is gone even its on.hp file manager not working when i insert memory flash at any usb ports.but it work at hp media player.i did a lot of factory reset as instruc