On starting mini I get a blue screen

Bu pressing the start button the mini goes into pause and I can get the normal screen by awaking the computer. However clicking on any icon does not work for several minutes. I would appreciate suggestions on how to approch solving this anomoly. Virginian

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Similar Messages

  • Satellite A65 won't start and I get only blue screen!

    When I start my satellite A65 a blue screen comes up saying "a problem has been detected and windows has shut down to prevent damage to your computer"
    it says to check if I have adequate disk space or to either disable or update the driver if a driver was mentioned in the stop message... or to check bios updates...
    I can type out everything it says if I need to, but that the jist
    Does this sound familiar to anybody?
    It might be because I didn't update enough when it told me to.
    It won't start, not even on safe mode, and it won't let me restore, which I would be perfectly willing to do at this point.
    help, please
    Jamous

    Hi
    Usually the Blue screen of death happens due to the serious software problem or due to the hardware malfunction.
    In your case it sounds more like something wrong with the hardware. Why, because you are not able to restore the notebook from the delivered Toshiba recovery CD!
    What to do buddy? I think the notebook must be checked.
    Try to contact an ASP in your country and ask for the further handling!
    Good luck

  • After starting iTunes 11, I get a blue screen error

    So after I updated my iTunes to v11, it started up and it was great! Then I rebooted my PC. After logging in, I started iTunes 11. Nothing happened for a few minutes. Then the screen became black for half a minute or so and then I get the blue screen error. Now this is happening all the time when I start iTunes 11 or if I connect my iPod Touch 4g for starting.
    Please help out!!! I want to open iTunes but knowing that I'll get a blue screen error, I can't. Please help!!! I can understand if you are getting the same problem.
    Thank You!!

    Not sure, but try these.
    Disable your firewall and anitvirus software temporarily. 
    Restart the iPad by holding down on the Sleep button until the red slider appears and then slide to shut Off. To power up hold the Sleep button until the Apple logo appears and let go of the button.
    Reset the iPad by holding down on the Sleep and Home buttons at the same time (for about 10-15 seconds) until the Apple logo appears (ignore the red slider), then let go of the buttons.
     Cheers, Tom

  • HT1752 my powerbook g4 will not boot up. i get a blue screen. i have tried to start up in safe mode, but get the same blue screen.

    My Powerbook G4 (with Snow Leopard operating system) will not boot up, I get a blue screen. I have tried to start up in safe mode by holding down shift key after startup tone, but end up with same result...blue screen. I need important photos and documents of this laptop, Even if I can just get it started up one more time. Need help fast! If you know what to do, please message back.

    In the text you say you are using Snow Leopard. Snow Leopard will not operate on a G4 (or any Mac with a PowerPC processor). Leopard OS 10.5 is the max OS for PowerPC processor Macs. Your profile shows OS 10.5.6. What OS are you using (or trying to use)?
    Will the PB boot using a systen install DVD?
     Cheers, Tom

  • I get a blue screen; tried the single boot and get "audit space low"; how to I get the computer to start again?

    I get a blue screen; tried the single boot and get "audit space low"; how to I get the computer to start again?

    In the text you say you are using Snow Leopard. Snow Leopard will not operate on a G4 (or any Mac with a PowerPC processor). Leopard OS 10.5 is the max OS for PowerPC processor Macs. Your profile shows OS 10.5.6. What OS are you using (or trying to use)?
    Will the PB boot using a systen install DVD?
     Cheers, Tom

  • On start up sometimes I get a blue screen and start up hang there

    On start up I sometimes get a blue screen and it hangs there the only way to get out of this is to turn the iMac off at the back then when you turn it back on the desk top appears without going through the startup screens. Even had the blue screen when starting in safe mode.

    Then run Apple Hardware Test in Extended Mode, it's possible you have a hardware issue. If you still can't locate the issue the next step is taking the machine in for a professional diagnosis at your local Apple Store or AASP.

  • I get the blue screen loop when I try to start my Mac Pro dual-core intel computer. How can I get it to open?

    I get the blue screen loop when I try to start my Mac-Pro. How can I get it to boot up all the way? Can anyone advise me?

    Which OS X is installed?
    Troubleshooting advice can depend on that information.

  • I keep getting a blue screen prompt "to enter my Cisco Password" when i start up safari?

    I keep getting a blue screen prompt to "enter my Cisco Password" when I start up Safari. Does anyone know why this would be coming up?. The only way for me to get by this message and get on-line is to shut down my computer and re-boot. Has anyone else had this issue?

    Dog,
    This has only started coming up since I downloaded a program called Geneio, not sure if that could be the cause. It was **** trying to get rid of that program. NEVER load that program on your Mac. It suppose to be a news update program that flashes up. Never again!
    In that case you should review The Safe Mac » Adware Removal Guide : Genieo.

  • Upon start I get a blue screen with B817977E

    HP Photosmart C8180-all in one. I use a Mac Pro laptop. I updated the driver 4 years ago to my Mac.  This year while in Fl I went to turn on the printer and I get a blue screen with the number B817988E on the screen. I haver tried re booting by unplugging both ends of the printer cord, but this does not work.  Holding the on button in does not work.  If it does come on My computer connects wirelessly, but does not print.  Then it will not shut down.

    lonnlar,
    This article should help resolve the error you are getting:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03081973&cc=us&dlc=en&lc=en
    Give the steps a try and let us know if it helps.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • I'm getting "MACHINE_CHECK_EXCEPTION" blue screens

    But this is not the same as the other guys :/  
    this computer is about 3 months old and just started to get this error 2 days ago..."MACHINE_CHECK_EXCEPTION"  What the hell does that mean???
    I was started a game, went to the track to start racing and I was sitting at 2 frames per second.  For 3 months with this computer I've been getting avg of 100-140fps.  So i turn the game off, as soon as i turn it off i get a Blue screen then it rebooted!!!  It rebooted fine at that point.  I try another game UT2004, play for about 30 mins, shut off the game, BAM!!!! Blue screen again!!! I figure, "ok i need to reinstall xp".
    So i reinstall xp, I load the K8N Neo mobo drivers, reboot, works fine.  Install Audio Drivers, I get a blue screen "MACHINE_CHECK_EXCEPTION" on boot, I uninstall it, works fine.  I install SP1, blue screen"MACHINE_CHECK_EXCEPTION" on reboot, I uninstall and install SP2, works fine. Odd?  Yes, I think so.... Now I've tried all kinds of combos here between the BIOS and whats installed.  Most commonly ON board sound enabled, and the sound drivers NOT installed, i will not get a Blue screen...Most commonly.  Out of about 50 reboots to test this theory, when every i install the sound device's drivers i get the error.  So i'm thinking it has something to do with the drivers are conflicting with the hardware.  But, this same computer has been working fine for 3 months prior to 2 days ago.  I dont get it!!! Did my mobo go bad?  Is there anything out there that can fix this, something i need to look at.  I shouldn't have to use a sound card because the mobo's onboard sound is suppose to be fine.  Any help please!  
    Thanks
    My DxDiag Report
    Time of this report: 12/3/2004, 23:52:51
    Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 2)
    System Manufacturer: NVIDIA
    System Model: AWRDACPI
    BIOS: Phoenix - AwardBIOS v6.00PG
    Processor: AMD Athlon(tm) 64 Processor 3200+,  MMX,  3DNow, ~2.2GHz
    Memory: 1024MB RAM
    DirectX Version: DirectX 9.0c (4.09.0000.0904)
    MotherBoard:  K8N Neo Platinum
    PS I think its hardware failure but I could be wrong.

    Thanks I'll give it a try... also I got this answer for other forums maybe some one can help with this
    interesting... machine_check_exception is a hardware related issue. typically caused with hardware and pentium processors, buti guess in your case its a little different. straighe from microsoft: "A machine check exception occurs when Windows XP and your hardware platform cannot recover from a hardware error so that the system can continue to run successfully and reliably. More specific diagnosis of machine check exceptions is difficult, and there is no general solution." You've got a beast of a computer there, so i really don't see why you'd be having much problem... i've heard overclocking is a common cause of this error, so if you are... change that. If that doesn't do it it could be your power supply, over heating, or bad memory. "
    I'm not overclocking, and he did menition "bad Memory"  So in moving that around I guess I'll have to try one stick at a time or both?

  • Ipad 2 is getting a blue screen of death

    Just a couple of days ago, my Ipad has started getting a blue screen of death. It gets a blue screen, and then shuts itself off. When it restarts, it's unresponsive for about 4-5 minutes before letting me using it again. When it lets me use it again, I have about 10 minutes before it starts all over. I'm hoping this is something that can be fixed whether hardware or software is the problem. I definitely don't want to have to spend $700 for the new iPad as good as it may be. I'm also serving in Manama, Bahrain for the next couple of years, and this island is no where near an Apple store.

    I would try to reset the iPad via iTunes, I don't think the problem is software based thou. I once had a mac mini which behaved simularly, the problem disapered when I changed the RAM, this isn't possible on the iPad thou.
    In the end, you probably have to do what Johnathan states.
    edit: I dont know if it's still this way, but ealier Apple have been giving world wide warrenty on thier mobile devices.
    link to warrenties:
    http://www.apple.com/legal/warranty/

  • Mini DVI to Video: blue screen after disconnect

    Hi,
    can't find a solution: after disconnecting the mini dvi to video-adapter I always get a blue screen and I need to restart my brandnew 20" iMac.
    I use it to connect my (old) television via s-video. It is clear that I bought the right Mini-DVI-Adapter.
    Can anyone help or has the same problem?
    iMac 20"   Mac OS X (10.4.8)  

    Thanks for the help. I'd figured out that shutting it off would keep it from happening and was probably a "best practice," but since 90% of my television watching is from my eyeTV, I'd be turning it on and off a lot.
    The only problem with leaving the setup plugged in, is that as soon as the mini DVI cable is plugged in, the resolution on the iMac resets itself to super-large fit for television mode and becomes virtually unusable as a computer, thus when I want to use my computer, the cable has to be unplugged....unless of course you know something I don't
    Thanks,
    Shaun

  • On startup Mac Pro I get a blue screen and a cursor on the upper left. The mouse cursor shows up independently. Is it likely a video card failure?

    On startup Mac Pro I get a blue screen and a cursor on the upper left. The mouse cursor shows up independently. Is it likely a video card failure?

    I managed to boot the computer and get the desktop to show. I now have a "repaired" computer. There are several problems that have cropped up. One is that I can only start up now in Safe Boot mode. Is there a way to turn it off? Also, I do not have a sound list, so I can't access anything requiring audio. Google Chrome only shows up as a white screen. Pictures that loaded before don't load in browsers, etc. Any suggestions? I figure I should reinstall Mac OS Lion for starts, maybe even do a mirror backup and reformat the drive. I think this drive has turned into scrambled eggs...what a headache!

  • I HAVE A SONY VAIO WITH WINDOWS VISTA- SUDDENLY I'M GETTING A BLUE SCREEN (crash dump)THAT SHUTS DOWN MY COMPUTER. HOW DO I STOP THIS. ALREADY TRIED TO UNINSTALL AND RE INSTALL. MAY NOT HAVE DONE IT CORRECTLY ?

    LAST WEEK STARTED GETTING A BLUE SCREEN (CRASH DUMP) AFTER CLOSING I TUNES, THAT CAUSES MY COMPUTER TO SHUTDOWN. IVE BEEN TOLD BY A PC REPAIR SHOP THAT I DONT HAVE A VIRUS. I DO HAVE ANTIVIRUS PROTECTION ON MY PC. ATTEMPED TO REINSTALL I TUNES BUT MAY NOT HAVE DONE IT CORRECTLY. I STILL HAVE THE PROBLEM. THE BLUE SCREEN ONLY HAPPENS WITH I TUNES. I HAVENT MADE ANY RECENT CHANGES TO MY MUSIC- NO DOWNLOADS /UPLOADS. ANY KNOWLEDGE OF THIS SITUATION? THANKS!!

    Hey Ishland,
    You are not alone. I'm getting the same thing I'm running Vista. I'm reading that Windows 8, 8.1 preview, Vista and XP.
    I'm thinking this has to be a Apple update to iTunes 11.0.4.4 fix.
    Cheers,
    Steve
    P.S. you might want to make your post easier to read by turning the cap lock off.

  • I get a blue screen on Windows 7 startup via bootcamp (Lion OS)

    My Windows 7 works fine via VMWare Fusion, however since having upgrading to Lion:
    1. Get a blue screen hardware issue starting up directly in Windows which appears just after the Windows startup animation. Using the windows repair doesn't seem to do anything.
    2. Bootcamp now missing from the Mac OS 'Start up' target disk.
    Has anyone solved these problems?
    Infuriating that Apple have released Lion and it buggers up Bootcamp. I do not wish to go throught the process of partitioning and reinstalling Windows again as it takes days because I have to install Vista and wait a while for Windows to eventually install both service packs before I can then install the Windows 7 upgrade disk. It took approxiamtely 2 days of time to do this!!!
    Thank you.

    I can easily get into Windows. It is just that the drivers don't seem to work correct, and makes the screen dark.

Maybe you are looking for

  • Creating UNIX file for RFBIBL00

    Hi All, I am creating the file for the RFBIBL00 program to use. I am filling in structures BGR00 - SESSION BBKPF - HEADER BBSEG - DOCUMENT so in my I am planning for my file to contain 1 session rec 1 header rec multiple document recs is there any sp

  • HT1600 I'm on 4.4.4 and when i check on setting i get '' your software is up to date ?

    My Apple tv 2 is running on 4.4.4 if i go to setting i get Your apple tv is up to date ? would like to get 5.1

  • Performance question on looping thrue blocks and items (forms 10.1.2.3)

    Hi all, I'm back again in Forms forum : ) !!! and I'm working on a new and very interesting project version used : Forms [32 bits] Version 10.1.2.3.0 (Production) A little question for gurus : On former projects I used to call loops on blocks and ite

  • Inconsistent Data Record

    One of my team members hit an error i.e Inconsistent data record We have already developed our model, and deployed in a Feb dataset, now when we come to an updated refreshed dataset i.e March, we hit an error where the data records are not consistent

  • Error importing old project into Premiere Elements 11

    Trying to import old project backup - that I made a couple of years ago.  When importing the Project file, I get the error "The selected file cannot be linked because it's type (video) does not match the original files type (audio and video)." I try