On starting windows xp I get an error message. applesyncnotifier.exe unable to locate component
On starting windows xp I get an error message. "applesyncnotifier.exe unable to locate component". I have uninstalled and reinstalled ITunes. Are there any recommendations?
Dunno. I just got it too. And after reading all the info, I tried what they did..
I copied the file from one folder to another one, and then I got a DIFFERENT error.
All I know is the last time I ran an upgrade to apple products, I lost my entire library, AND my I pod.
So I have been avoiding updates.. I finally try one and again, the silly thing acts up.
If this is the quality of Apple software then Im going to stop updating at all.
Similar Messages
-
My operating system is Windows XP SP3. I have Adobe 11.0.08 installed. I cannot print a pdf file/document. Error message - AeroRd32.exe - Unable To Locate Component - "Application failed to start because lxdautil.dll not found." Any suggestions?
That DLL is part of your printer driver; reinstall or update the device driver for your printer, and the message should go away.
-
Since recently upgrading to the latest ITunes,on start up I get an error message:
"AppleSyncNotifier.exe Entry point not found .
Procedure entry point xml TextReader Constname could not be located in
the dynamic link library libxml2.dll"
Any body come across this? Any solutions?Doublechecking, Dad:
I have also reloaded all other iTunes software.
Did you use the following document as a guide?
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
(If we're looking at program file damage down in Apple Application Support or Apple Mobile Device Support, the 2. Verify iTunes and related components are completely uninstalled section is very important.) -
Windows XP: removed bonjour by accident in the add/remove program. Now, everytime i log on, i get an error message that reads.
APAgent.exe - Unable To Locate Component
This application has failed to start because dnssd.dll was not found. Re-installing the application may fix this problem.
Tried reloading my Airport Extreme CD, but no luck.
Googled this error & got nowhere. How can i get fix this annoying error message?Which Bonjour were you using, daniel? The Bonjour Print Services type, or the one that comes bundled with iTunes?
-
Error message hphmon06.exe - Unable to Locate Component
I am getting the following message upon startup:
hphmon06.exe - Unable to Locate Component
This application has failed to start because hpzjrd01.dll was not found. Re-installing the application may fix this problem.
On HP's website, it says:
Uninstall all HP products associated with this device.
Then,
Click here to go to the Software & Driver download page of the HP Web site.
Type the product name in the search field, and then press Enter.
What "products associated with this device" do I uninstall? And what "product name" do I search for when I go to look for the new driver?
These instructions could not be any more vague and frustrating.Should you have a HP Photosmart printer, consider uninstalling it and reinstall it. The error message you are receiving I believe is related to this device.
Or
Failing that you may also try using the system configuration utility (msconfig)
Click Start then Run. In the Open box, type msconfig.exeand press enter. Once displayed, click on the "Startup" tab. You will see a list of items and the 2 columns that we're interested in are "Startup Item"
look for hphmon06 and "Command" look for hphmon06.exe.
Note you can expand the width of Command column by holding down the left
mouse button with the cursor on the vertical line between the column headings
and then dragging the mouse to the right.
To stop the process click on the box on its left to remove the check mark.
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations. -
I received an iTunes update today and updates files. Tonight, I couldn't acces my iTunes. I uninstalled and reinstalled and still getting same error message: iTunes exe unable to locate component. This application has failed to start because MSVCR80.DLL was not found. Reinstalling the application may fix this problem. I've done it several times and still get the error. I'm fearful I have lost all my music. What can I do?
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
Error Message "ElementsAutoAnalyzer.exe unable to locate. This application failed to start because ExtendedScript.dll was not found".
This error message is seen every time when first starting Windows Vista, PRIOR to starting Photoshop Elements 12.1
It does not seem to interfere with the normal operation of Photoshop Elements, but it is a constant annoyance.try removing all itunes and all other apple program
follow this link for more info. http://support.apple.com/kb/HT1923
reboot ur window after uninstalling
after that download the latest itunes setup and install. -
At my PC startup, I get an error message "AppleSyncNotifier.exe--Entry Point Not Found" My iPhone now doesn't show up as a Device in either iTunes or My Computer on my PC. I've uninstalled/ reinstalled iTunes & run diagnostics-no luck. Ideas?
I think my problem is fixed now.
For the fun of it, I reinstalled iTunes 9.2.1 today (using the exact same installer as I did yesterday), but this time I didn't uninstall iTunes first. As expected, iTunes recognized my iPhone (as I expected it to, until my next reboot).
A few minutes later, Software Update showed up and among the updates is "iPhone SDK Compatibility Update". The description indicates that installing this should fix an issue where iPhones and iPod touches aren't recognized by iTunes. Isn't that interesting?
I installed that update and most of the others waiting for me (including Java, Safari 5.0.1, and a few others - not 10.6.4 though, due to the issues with nVidia graphics cards). After the reboot, I started iTunes, and it saw my iPhone!
So, if you're having this same problem, I'd recommend tracking down this update and see if that does the trick for you. Hopefully it will. -
After installing Itunes 10.6.3 When ever I start the computer I get a pop up the says "Applesyncnotifier.exe- unable to locate component, this application has failed to start because Corefoundation.dll was not found" How can I get rid of the pop up?
I hope it doesn't effect how I down load my itunes to my ipod and iphone.
No you should be fine. (The MobileMe service is being shut down, anyway, so there should be no impact at all.) -
After downloading and trying to install the newest version of i tunes on my pc, I got an error message telling me: unable to locate component MSVCR80.dll. Now I can't use the version I had and obviously not the newest version. Any ideas about how to fix ?
Solving MSVCR80 issue and Windows iTunes install issues.
Thanks to user turingtest2 for this solution.
Solving MSVCR80 issue and Windows iTunes install issues.
If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
You may be required to boot into safe mode to complete the folder deletion process. -
When ever I log onto my computer I keep getting this error message.
AppleSyncNotifier.exe - Entry Point can not be found. Something to do with an SQLite3.dll file. Does anyone know how to fix this?Hi Molly - I can tell you're frustrated and I will do my best
Can you tell me whether you have a 32bit or 64bit system. You can find out in the following way
Windows Vista or Windows 7
If you have Windows Vista or Windows 7, there are two methods to determine whether you are running a 32-bit or a 64-bit version. If one does not work, try the other.
Method 1: View System window in Control Panel
Click Start, type system in the Start Search box, and then click system in the Programs list.
The operating system is displayed as follows:
For a 64-bit version operating system: 64-bit Operating System appears for the System typeunder System.
For a 32-bit version operating system: 32-bit Operating System appears for the System typeunder System.
Method 2: View System Information window
Click Start, type system in the Start Search box, and then click System Information in thePrograms list.
When System Summary is selected in the navigation pane, the operating system is displayed as follows:
For a 64-bit version operating system: x64-based PC appears for the System type under Item.
For a 32-bit version operating system: x86-based PC appears for the System type under Item.
If you have a different OS (operating system) let me know which one and I'll tell you how to find that out.
Once I know I should be able to give you the fix.
Cheers -
When installing itunes on my windows XP I get an error message "Service Apple Mobile Device"
When installing iTunes on my Windows XP I get an error message "Service Apple Mobile Device (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services". I don't know what this means and I do not know how to resolve it. Can you advise please?
Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.
iTunes 11.1.4 for Windows- Tips for Unable to install or open -
When starting iTunes I continually get an error message " The registry Settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes." I have unistalled and reinstalled iTunes several times and have cleaned up the registry using a 3rd party Windows utility. Any tips on removing this error message for good?
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes -
Can't open iTunes, keeps getting this error "iTunes.exe - Unable to locate component. This application has failed to start because MSVCR80,dll was not found"
Solving MSVCR80 issue and Windows iTunes install issues.
-
I am having a problem updating itunes to the latest version on my windows xp i get the error message 126 and the banner that says this application has failed because MSVCR80.dll was not found. anyone have a fix suggestion? thanks
Click here and follow the instructions.
(98724)
Maybe you are looking for
-
Photoshop CS2: "file not compatible with this version of Photoshop" error
So, I've been working with Photoshop for almost 20 years now, and lately I've been getting this error message on occasion (but not on every file) when I go to open a file I worked on just yesterday: "Could not complete your request because the file i
-
Error Message When Activating InfoSource
Hello - I receive the following error message when I attempt to activate an InfoSource in BW (I'm using the program "RS_TRANSTRU_ACTIVATE_ALL" via SE38): Mass generation: No versioning for PSA table /BIC/B0000729000 for InfoSource 8ZO_CHGRE Message n
-
How do i add a swipe event to stage or element?
I like to add a swipe gestures to my animation. It should work on mobile. How do i add a swipe event? Do i need an invisible button?
-
Hello all. Just trying to find out how to record audio from the iMac 27 inch (Lion). If you know, does the same procedure also apply to a Macbook?
-
Hello, I have a very strange problem. I designed a fillable form using Designer7.0. I reader enabled the form using Adobe Reader Extensions Server 7.0, so that users use their Adobe reader(7.0.5) to fill in the form. The empty PDF form is around 700K