On startup getting debugger panic message..what does it mean

It has happened two days in a row now.  When starting up from shut down state, a page full of message shows up..I could only understand debugger call panic.  What does this mean, is my computer infected?
Thanks

http://www.macworld.com/article/2027201/how-to-troubleshoot-a-kernel-panic.html

Similar Messages

  • When trying to re-install itunes i get error HRRESULT:0x8007054F what does this mean?

    I am useless with technology and desperately need help!  When trying to re-install itunes i get error HRRESULT:0x8007054F what does this mean? I have followed step by step guide to de-install then re-install itunes as instructed when i couldnt connect my new ipad to my computer to synchronise it with my exisiting itunes account initially set up with my ipod. I successfully re-nstalled itunes but it wouldnt open and told me to de-install and re-install again.  This has repeated several times and now i get this error message. I dont know what to do next? 

    HRRESULT: 0x8007054F
    These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
    Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
    If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 8007054F, or some other number? (If they're another number, what number are you getting?)

  • After entering the network password (WAP2 Personal), I get (-3906) error. What does that mean? I can I solve the problem?

    After entering the network password (WAP2 Personal), I get (-3906) error. What does that mean? I can I solve the problem?

    I had to call my bank. They were aware of the problem with online banking and Firefox 4 and they were able to make adjustments at their end. I now have online access again.

  • HT1414 i get an error 9 what does that mean?

    i get an error 9 what does that mean?

    This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
    http://support.apple.com/kb/TS3694

  • A cannont get mail message, what does it mean?

    i got a message that my email wasn't connected. the message reads: cannot get mail the user name or password for "imap.apple.mail.yahoo.com" is incorrect." what does this mean? it was working fine 10 minutes ago! i've tried deleting my email address, and reseting it, but i keep getting that message. can anyone help?
    Lila

    I found out that happens to me when my IPhone is trying to retrieve mail at the same time as other apps. Either my Yahoo! mail page is up at work or I left my Mail.app open at home. If I try a few minutes later it's usually cleared up.

  • When I try to download itunes, quicktime and icloud i get an invalid siganture message. what does this mean

    when i try to download itunes, quicktime and icloud i get an invalid signature message. what does this mean

    Moved to Adobe Digital Editions forum.
    Neil

  • TS2972 apple tv can't sign in to iTunes Store until the network time has been set. this is an Apple generated message. what does it mean? how can i fix it? very very very simple questions but there is no reasonable answer from Apple anywhere on the intern

    this is an apple generated message. simple!
    what does it mean? so far no one at apple has a clue.
    how do i fix it? nothing even begins to address this issue so far. generalities about system setup show a lack of respect for customers. yes my system is plugged in and i have reset and rebooted and rechecked everything. i need help because this a real problem that needs a real solution, not more platitudes.
    help please, not more wasting of my time. i have spent an entire afternoon on this already.

    this is exactly the kind of response i expected, almost begged support to please not do this to me and yet there it is another meaningless, non helpful, standard template response to restart my apple tv.
    this does NOT work which is why i am contacting you. i have tried all suggestions about unplugging and restarting and nothing works.
    i live in an apartment and logon to the provided wifi wireless. so i do not have access to a router. however, management says they have talked with their provider and have been assured that the required ports are available.
    remember all the jokes about how bad windows was because the solution was always to re boot. funny huh? how is apple any different.
    i have been to the local apple care store and they are clueless, too.
    should we just end it here and you admit that i will not be getting any support from apple on this one? i got the ipad because my kids were such big fans. it is difficult for me to share their enthusiasm.
    at this point i am just curious about how you say you cannot support your own product so i can complete my file on this contact.
    thanks...sorry it was you who got this problem..

  • Panic!  What does this mean???? help

    Hi,
    My macbookpro is just 3 weeks old and I already had 3 panics.....
    Here is the log file for one of the event:
    Mon May 28 18:34:45 2007
    panic(cpu 1 caller 0x0035DF18): mbuf address out of range 0x1183000
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x14203b68 : 0x128d08 (0x3cb134 0x14203b8c 0x131de5 0x0)
    0x14203ba8 : 0x35df18 (0x3eb8f4 0x1183000 0x144eb78 0x206)
    0x14203be8 : 0x23ab46 (0x25b70100 0x0 0x1e2 0x1)
    0x14203cf8 : 0x23ed3a (0x2b8e394 0x25b70100 0x1 0x1e2)
    0x14203d38 : 0x361033 (0x2b8e16c 0x0 0x25b70100 0x0)
    0x14203dd8 : 0x35342d (0x2b8e16c 0x0 0x14203e9c 0x25b70100)
    0x14203e08 : 0x34f370 (0x3478dd0 0x14203e9c 0x2d89004 0x0)
    0x14203ef8 : 0x34f604 (0x3663dac 0x3478dd0 0x33 0x13a11930)
    0x14203f58 : 0x379e23 (0x3663dac 0x2ff3cb8 0x2ff3cfc 0x0)
    0x14203fc8 : 0x19b17e (0x2eb2900 0x0 0x19e0b5 0x2eb2ac0) No mapping exists for frame pointer
    Backtrace terminated-invalid frame pointer 0xb019f558
    Kernel version:
    Darwin Kernel Version 8.9.1: Thu Feb 22 20:55:00 PST 2007; root:xnu-792.18.15~1/RELEASE_I386
    What does this mean?
    Is there a fix?
    Thank you.
    Fred

    fredericlang,
    Your plan sounds good to me, and yes, there could be some "intermittent" hardware failure causing the panics.
    Before we go on, I want to establish that you should NEVER have a panic, provided you have three things:
    1) Flawless hardware
    2) A flawless installation (which is why we are "zeroing" and reinstalling)
    3) No bad or conflicting kernel extension
    To back this up, I will tell you that I have only had one KP on this machine, it was long ago, and it was due to a disk error (and thus a bad installation). Currently, my "uptime" is at 44 days, 13 1/2 hours, and I put this thing through its paces every day.
    OK, well a 4th thing: Problematic peripherals.
    Let's rule these out, one by one. Are you connecting anything that could cause panics, or is anything connected when they occur? No? Let's move on.
    We are pretty sure we have ruled out a bad installation, and you are going to make double sure. Good.
    Are you installing any third-party "haxies," or anything else that might place kernel extensions in the Extensions folder? Are you running the Migration Assistant to transfer stuff from a PPC machine? If you can rule this last one out, we are left with only one possibility...
    HARDWARE! As I say, you should never have a single kernel panic. If you have narrowed it down to hardware, and they still occur, be firm! Insist, regardless of the results of any diagnostics, that you have a new machine, or a logic board/memory replacement. If necessary, escalate your case. Get this fixed, and get it fixed expeditiously.
    Scott

  • 503105002 error message what does it mean

    503105002 error message what does it mean

    Hi
    The error 503 appears when the site is currently unable to handle the HTTP request due to maintenance of the Business catalyst server.
    Could you please try publishing the site now and check if  that is working fine now ?

  • "Visual voicemail is currenty unavailable" message what does this mean

    ON my phone i says visual voicemail is currently unavailable" you may hve additional messages on the server"
    what does that mean?
    help 911
    thank you
    I have plenty of data space and my bill is up to date

    So I have this problem with the Visual Voicemail to but it started when I switched my Data Plan at AT&T from the Unlimited to the DataPro with Tethering.
    I did it to prepare for iOS4 any suggestions, No I do not have a 3rd Party Profile on my phone.
    Thanks

  • TS1424 When trying to download prior purchases on ITunes, I keep getting error 3131. What does this mean? I can't find what this error means.

    When trying to download purchase music from ITunes, I keep getting that it can't because of error 3131. What does this mean?

    Must be a temporary glitch...seems to be up and running again.

  • TS1424 error message, what does this mean? MZCommerce.CreditBalanceMismatch.Mobile_message

    MZCommerce.CreditBalanceMismatch.Mobile_message
    What does this mean?  Will not let me purchase music.

    anche io devo aggiornare il mio tom tom su I Phone ma mi dà il messaggio MZCommerce.purchasablesAssetTooBigForDownload_message
    Non so proprio come aggiornare allora le mie mappe....
    Bella storia questa!!!!
    Se qualcuno mi sa rispondere gliene sarei grata visto che con Apple Store non riesco
    Grazie

  • Error message what does it mean?

    I have attempted to open Safari on my windows vista based system. However, whe I open it now I get two error messages the first says...
    "The procedure entry point CFPropertyListCreateWithData could not be located in the dynamic link library CoreFoundation.dll."
    When I click out of this I get the message;
    "Your copy of Safari is missing important software resources. Please reinstall Safari."
    I have repeatedly reinstalled Safari but still get the same error messages.
    Can anyone help me resolve this issue.
    Thanks in advanced.

    Dear b noir, thanks for your response. After constantly uninstalling and reinstalling I was driving myself crazy with trying to resolve this issue. I followed one pice of advice and then another but to no avail. I had to uninstall all aspects of iTunes and Quicktime and all asoociated programmes and files.
    What finally resolved this matter was following the guidelines given in this link and I'm pleased to say success. I share this with people who may encounter a similar problem. I am in no way computer lietrate but not a novice and I found these instructions time consuming but oh so worthwhile.
    http://support.apple.com/kb/ht1923

  • Private_strands 12 message: what does it mean?

    Hello,
    At every log switch we notice the message
    "Private_strands 12 at log switch"
    What does this message mean? Everything runs OK, so it only seams to be an informative message...
    Thanks & regards,
    Jan.

    System.out.printin("Hello from Brent"):should be
    System.out.printin("Hello from Brent");Java source code line terminators are semi-colons

  • Never gotten this error message, what does it mean?

    When trying to access this link:
    http://einestages.spiegel.de/hund-images/original/2008/02/24/3/49cb6707b145cf399 ce7b386793af06e_orig.jpg
    I got this error:
    ERROR
    The requested URL could not be retrieved
    While trying to retrieve the URL: http://einestages.spiegel.de/hund-images/original/2008/02/24/3/49cb6707b145cf399 ce7b386793af06e_orig.jpg
    The following error was encountered:
    Access Denied.
    Access control configuration prevents your request from being allowed at this time. Please contact your service provider if you feel this is incorrect.
    Your cache administrator is [email protected]
    Generated Fri, 07 Nov 2008 01:59:05 GMT by hprx04.spiegel.easynet.de (squid/2.6.STABLE18)
    I've never seen this error before. I have a user account and was logged into the site. Any ideas?
    Thanks!

    Hi Jason
    It seems you happened across a blocked or restricted area of the site. Although not a user I get the same message. Contacting the site administrator may offer a more comprehensive answer.

Maybe you are looking for

  • IPod touch not recognized after upgrading to Mac OS X 10.5

    Hello I recently upgraded my macbook pro to os x and now my ipod touch is not connecting to itunes. I'v reset my ipod touch and now when i plug it in nothing happens still. This is quite distressing as Im addicted to my ipod. Any help would be greatl

  • Interconnect - Workflow integration

    Hello, We are working on an integration project using interconnect 4.1 and workflow. In interconnect we use content based routing, for workflow we defined routing rules. When using the workflow integration we succeeded in receiving an event FROM inte

  • Dashboards: Wait for a dashprompt selection before executing Answers report

    We have some dashboards consisting of a dashboard prompt and two Answers reports. Because the answers reports take a long time to execute without narrowing the selection, we would like BI to only start executing the Answers reports after a selection

  • How do I intergrate my AE w/ my Belkin wireless router?

    My problem is I want to use my AE to make my printer wireless, but I don't want to have 2 network names. I have a Belking wireless router that gives me a stronger signal in my house, so i'd like to just stay on that network and use the AE to make my

  • Iphoto 2, 4 and 6

    I have iPhoto 2.0.1 currently on my computer. I have a disk of pictures from my husband's G4 computer with iPhoto 4.? that my computer won't open. The message says 'you can't open your current photo library using this version of iPhoto...'. My dilemm