On the connector block CB-68LP, there are few screw terminals. I am trying to find the maker and the part number of this screw terminal. Any help is much appreciate​d.
I am designing a new product to use in our environment and I am trying to go from the I/O card to the PCB eliminating the connector block. For this purpose, I need to find out the screw terminal part number as well as the makers name. Please help.
The screw terminals are made by Phoenix:
The 14 screw terminal row is P/N 18-69-33-4
The 12 screw terminal row is P/N 18-69-31-8
Similar Messages
-
Due to IOS it Said it could not restere backup to new iPad, so i set up as new iPad thinking i could restore from backup afterwards, Then I updated iOS but Joe it says there are no backups...White Can I find my backups and restore Then?
Pls ignore auto correct mistakes!I found a way to get to my data. So do not need remedy at this time.
fwiw, I changed my ios7.04 setup answer of restore from itunes to new iphone. Eventually that allowed me to set up icloud, then turn off find iphone, restore. Very strange ios update. -
I have an iPad2 and I can't delete some apps I was downloading but froze. I can get the apps to wiggle, but there is no X in the upper left corner for deletion. I have tried re-setting and didn't work. Help will be appreciated.
See if anything here helps.
If the downloads are stalled or "waiting" - try these suggestions.
Tap the "waiting" icon and see if you can pause it. If it does pause, then tap it again and see if it will resume. If that works, repeat the same steps for each "waiting" icon.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered.
If all else fails, download the updates or the apps in iTunes on your computer and then sync the content to your iPad. -
I need to know what the part number is for a replacment hard drive chasis - 8460p
I need to order a replacment chassis that the hard drive screws into for the 8460p, does anybody know the part number for this piece?
Hi:
You are going to have to contact HP for that--1-800-334-5144.
The only parts listed in the service manual are for the actual hard drives.
Paul -
I'm trying to make a time sheet and include a grid, but I'm having a hard time figuring out how to print a full grid on my spreadsheet. There are options for shaded grids but I want a defined grid, and I have spent the last 2 hours looking for the answer. Any ideas?
Hi Cynthia,
Are you planning to have this table do any of the calculation, or is is to be used as the electronic equivalent of a sheet of paper with a grid printed on it—a place to record the data.
For your seven column table:
Are you using one or more rows at the top of the table to label the data below? If so, you might want this row (or these rows) to be set as Header Rows.
Are you using the leftmost column to label the rows? If so, you may want this column to be a Header column.
The default table supplied on the "Blank" templates contains one header row and one header column. If you need more (or fewer) Header rows or columns, select the table, then go Table (menu) > Header Rows > (choose the number you need). Repeat to set the number of Header Columns.
To make a seven column table from the table supplied by default, click on any cell in column H (The eighth column), and drag right to add more cells to the selection, until you get to the last column of the table. With these cells selected, Go Table > Delete Columns.
To make the remaining seven columns fit across a single page:
Go View > Show Print View to show the table as it would appear when printed to paper.
Select the table by clicking its icon in the Sheets List to the left (easy method), OR by carefully clicking on the outside boundary of the table itself (fiddley method).
With the table selected, you will see square white handles at each corner and at the middle of each side (including the top and bottom).
With the mouse, grab the handle in the middle of the right side of the table and drag right (or left) until the table just fits onto the width of the defined page.
With the table still selected, set the thickness and colour of the cell boundaries using the Gaphics Inspector (as described by Jerry), or using the Stroke, Thickness and Color Well controls in the Format bar above the working portion of the Window.
Regards,
Barry -
I have a A4 document (569 pages) and within that A4 there are few A3's. Is there a way to isolate the A3's or find out what page numbers are A3's instead of scrolling through all the 569 pages???
thank you for the info... however I'm done buying pdf readers.... I've got three now, that should suffice.
I don't think there's a problem such as you mentioned because the pages are all similar : text and drawings. Some of the pages with drawings work, other similar pages don't.
I converted with Calibre to epub format and this seems to work !!!
So good so far...
Now I need to find a conversion to pdf to allow me to use goodreader or iannotate.
Basically... the text is ok, because a conversion allows reading. So a shortcoming by Apple in my opinion. Again, all pdf's should be readable on such an expensive tool !!! -
Hi there. My iPod Nano was stolen from my car today. I do know the serial number of this stolen device. Is there any way that Apple can block another user from connecting this stolen device to iTunes? Also, if another user was to attempt to connect this stolen device to iTunes, would Apple be able to inform of the username of this person in order that I could then pass this information to the police?
Is there any way that Apple can block another user from connecting this stolen device to iTunes?
No.
Also, if another user was to attempt to connect this stolen device to iTunes, would Apple be able to inform of the username of this person in order that I could then pass this information to the police?
No. Apple can do nothing to help. Sorry.
Reporting a lost or stolen Apple product
B-rock -
I downloaded Vtok to my new iPod touch but half the contacts came up as random letters and numbers and there are no profile pictures. I tried reinstalling the app but the same thing happened. Any suggestions?
Go to the developer's support site.
iOS: Troubleshooting applications purchased from the App Store -
My Iphone won't appear in my devices in Itune.... And the WiFi does not work on my phone.... I seems like there is no solution to update my phone to the new ios on my computer or WiFi without using the 3g because of this!!! help me out
Hello there, TempestBelcher.
It seems you've covered all the bases, but feel free to review the iPhone Troubleshooting Assistant for connectivity here:
Apple - Support - iPhone - Calls Troubleshooting Assistant
http://www.apple.com/support/iphone/assistant/calls/#section_0
If you've followed all the instructions then there are a few good recommendations for what to do next in the last step.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D. -
Just gave my old ipad to Mother N Law. How do I get her up to speed? I heard there are some classes she can take. How do I make a reservation?
They have Discover your iPad workshops at the Apple Store. Is there one near her?
-
having issues with contacts... groups specifically... when I add contacts to a group and check back there are fewer in group than when i started.. they disappear??
Hi
in this scenarion control is not going inside the condition
if (vo.getRowCount() == 0) and therefore VO is not getting initialized
why u are counting the row of VO to initialize the VO ,if possible pls remove this condition check ,problem will be solved .pls let me know in case of any issues.
thanx
Pratap -
I have a macbook and when I power it on and then select myself as a user...It won't power up. It stays in the white screen with the apple logo. I am online currently under 'guest user'. Is there anything I can do from the keyboard to fix this??? Help!!!
Could you specify the model of MacBook and the OS X it's running, please? Some of the advice or references vary along with the system, so this could be helpful to formulate a reply. I've never used a Guest User selection, but do have more than one User.
If the computer does not have an optical drive, you may be able to boot it into a recovery disk mode or something; in an attempt to see what is wrong and maybe fix it.
Good luck & happy computing! -
So this morning, the sound on my MacBookPro was working perfectly, but then all of the sudden, the sound didn't work. When i turned the volume up, it showed it turning up, but there was no noise. I also tried plugging in my earphones, and it still didn't work. I don't know what to do!!
Go step by step and test.
1. System Preference > Sound > Output > Internal Speakers
Highlight Internal Speakers / Headphones
Make sure that Mute is not enabled.
2.Plug in and remove the headphone.
If you see red light in the headphone port, plug the headphone
in and out of the port 5 or 6 times to flip the microswitch inside.
Sound output may be stuck in the digital mode.
3. Reset PRAM. http://support.apple.com/kb/PH4405
4. Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
5. Applications > Utilities > Audio MIDI Setup
Audio Devices window
Side Bar
Click the Built-in Output.
Under Mute any of the boxes checked? If so, uncheck it. -
Lightroom 5.6 When I try to publish the photos from Lightroom to SmugMug I get an error Canceling task at the top left side and the photos are not published. I have published photos before just last week so not sure whats going on. Any help would be great.
See my first post in this topic:
https://discussions.apple.com/message/21371126#21371126
Trashing the preference file may help, as I've outlined in the topic I've linked to. Otherwise, follow the steps regarding removing 3rd party QuickTime components. Also, see the final post by the OP (EEye87) regarding how his problem was resolved (a combination of trashing the preference file and the 3ivx component).
John -
Should I download and install the latest version of Adobe Flash to use with Lion? My need for Flash is very basic: Google Maps, YouTube, and content on certain websites. Thanks for any help you are able to provide.
Thanks for the speedy reply. I have read so many comments about Flash being incompatible with Lion I was wondering whether to download it or not. So many sites on the Web still require flash, however, you almost don't have a choice but to download it even if it is incompatible. I gather a better version of Flash will be available for Lion soon. Again, thanks for the help. I will download the latest version of Flash.
Maybe you are looking for
-
It's explained pretty well in my initial question. Not sure what else you would need in the way of details. I will say it's been going on for a month or so, and it happens every time I start Firefox, and every time I open a new window.
-
I've been reading about Extended Classic Scenario (ECS) and how to get customer fields (CUF) to R3 using a BADI. Is something possible for the classic scenario also? I've defined CUF in INCL_EEW_PD_ITEM_CSF* and they show up, but I want to map the CU
-
New episode not showing up in iTunes
hi there, I've searched around but don't see an answer to this specific problem. I've just uploaded our second podcast updated the xml and pinged itunes i know the itunes ping worked as the first episode was updated however i dont see episode 2 on th
-
Hi, I created new user through shared service in Essbase 11.1.1.3. But when i want to login through the same credential it fails to login. What could be the reason. Thanks
-
BI extractor and/or content for BPM available?
Hallo I have a question concerning BPM. Does anybody know if there is standard content and/or an extractor to retrieve BPM Process Data from the CE 7.1? I am looking for something similar as the SAP Workflow extractor and/or data model. Does someone