On the main window, what is the column to the left of client status icon?

on the main window (ARD version 3), what is the narrow column immediately to the left of the column with client status icon? (The columns to the right of the client status icon are Name, IP address, DNS name, ARD version, and so on)? I can't find this mentioned anywhere in the Remote Desktop manual.
That column is blank next to all the computers except one, which has a blue (aqua) circle.
PowerMacG5dual1.8GHz Mac OS X (10.4.8)

I have now managed to reproduce the blue (aqua-looking) ball. Just as I had at work, I installed ARD v. 3. on a machine on my home LAN, once again setting it up as the administrator machine. To install the client on another machine in the LAN, I then chose the "Upgrade Client Software" option. I entered the username and password of an admin user on that machine, hit "Upgrade" and the installation appeared to go successfully. Upon returning to the Scanner (main) window on my administrator machine, I noticed the blue ball in that first column next to the name of the machine with the newly updated client software.
Was there anything in common between the one machine at work with a blue ball in that column and the one machine at home with the blue ball? The only thing I can think of is that on neither of those 2 machines had I ever manually installed ARD 2.2 client previously. Does that make any sense?

Similar Messages

My safari stopped letting me open a new tab in the same window. what happened and how can I get it back to normal?

When I try and open a new tab in the same window, it wont open a new tab. It leaves the page I am on and goes to the "top sites page."

Hi,
If you have got to Mountain Lion OS X 10.8.2 and therefore Messages version 7.0.1 then double click the individual chats.
Once they are in separate windows you can chat like that (That's the way I used to chat - I didn't even use the tabbed chat)
It is impossible to create a separate Chat window each new chat (you have to separate them off from the main window which also keeps a "copy")
New chats are added to the main window even if you have used the red button to hide it. (CMD + 0 from the Window menu brings it back)
10:49 PM Tuesday; November 20, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Problem with Body of the main window

Hi friends,
While Printing the smart form the main window body is not reaching to the end of the main window dimensions.(There is no footer for the main window).
Its Printing all the records and at the end its giving one line gap.
My problem is the vertical lines will come, up to the line items it's having. and d last gap am not getting any lines.as the body is not reching to the end of main window.
Plz help me why its taking one line Gap in d main window Body.

Hi Farook,
Select the line types and assign the patterns to display the lines properly.
Regards,
Sravanthi

Dispalying total below the main window.

Dear All,
I have one main window in script and there I am disploaying few line items.
Just below the main window I have created another window for displaying total of the line item.
How I will adjust the window that TOTAL should comes exactly below the line items.
Please guide.
Thanks & Regards,
Abhay.

Hi ,
If it is a Script ,
Please dont create another window:
keep the totals in the main window only
this gets displayed after the total
Reward if Use full
Karthick

Print material po text in the main window of pur. order

Hi experts,
Here is my issue regarding MATERIAL PO TEXT in smartform of purchase order:
                      I want to get the material po text in the material description field itself or beside to this column in the mainwindow only in the print of purchase order
so please let me know how to read the material po text to a internal tab field.
very glad for ur replys
TNQs n REGARDS
mahathma

Hi    TNQs for ur responce.
i want to get the item text in the main window beside to material description column .
i think u got my point actually we'll have item texts for each item , i want to get the text of each item in that row only
i used include text and i gave following attributes
Text Object :      EKPO
Text ID         : A03
Language     :     EN
just tell me ,should i need to give any code for this.
thanks and regards,

Printing from the main window -- song order is not the same as playlist ??

iTunes 10.0.1 (22)
OS 10.6.4
Let's say you have a album with 18 songs. The songs are in the exact order of the album, from 1 of 18 all the way to 18 of 18. (track numbers are also correct, in order). You view by album (constrain the results window by searching for album title)
Now, print. Select any option, (I tried both cd jewel as well as song listing -- doesn't matter which you select).
The ORDER of the printed song list (or jewel case insert) DOES NOT MATCH the order of the songs in the album.
What good is that?
I can recreate this with various albums.
This NEVER happened before version 10.
Anyone have any info on this?
PS -- if you create a PLAYLIST and then copy the album into the playlist, it prints just fine. The issue is printing from the main window when in album view mode.
Thanks,
J
Message was edited by: Jeremy Roberts

Try changing X postion to not equal to zero something else for example.
/:           POSITION WINDOW
/:           POSITION XORIGIN '-0.1' CH YORIGIN '+0.4' LN
/:           SIZE WIDTH +0.7 CH HEIGHT +5.0 LN
/:           BOX FRAME 7 TW
/:           BOX HEIGHT '1.1' LN INTENSITY 15
Nabheet

REG: Want to have a dynamic length in the main window of the smartform

Hi,
Based on the table contents and the line items, the length and size of the table should either increase and decrease,
It shall be very helpful in meeting a requirement..
Regards
Srikanth.P

Hi,
What exactly is it that you want to do?
The lenght of the table will automatically be dynamic as the table will be build dynamically.
If you want to place something after the table and for that reason need a dynamic main window you can put it in the footer of the table and it will place it after the table.

Tab setting in the main window sapscript table

Hi ,
i have one problem ,i am doveloping new script.in the main window having 5 column table .the table col size is grater than the populated field size.main problem is these values are not populated in the middle of the every column of the table.
to achive this how to set the tabsettings?
please sent the solution for this asap.
Thanking u.

Hi SS,
U can do that by giving the alignment (Right,Left,Center Alignment) in the Pragraph format and also in Character format.......
any of the format you can choose....
as for as tab is concern you must have the size of the value which you want to populate...
accordingly you have to give the tab size in paragraph format...
thnx
Rohit

The main develop module controls have disappeared from the develop window. How do I recover them?

The main develop module controls have disappeared from the develop window. How do I recover them? I'm working with Lightroom 5.3. The missing controls are the sliders for exposure, contrast, clarity, etc. I must have inadvertantly clicked something that made them disappear but nothing I've tried brings them back. I've never had this experience in the years I've been using Lightroom (since version 1.1).

Right-click on any other item Tone Curve for ex., and check on "Basic" if that's what you are missing.
If you miss the complete Develop module right-click any other item Library for ex and put a check on Develop

2 different tables in the main window with same internal table data

Hi All,
can we have 2 diffterent tables with same internal table data into its work area in the main window.Is it possible or we will get any run time error.?
is it like having 2 nested loop with same internal table ?
ex : loop at itab1 into wa_itab.
loop at itab1 into wa_itab.
endloop.
endloop.
can we use like this?

Hi,
there will not be any error ...but what is the use of it...
do you need to have a controlled way of display ...of the data...
If so then you create another workarea in the global definitions of the same type and then use it...
Regards,
Ram

SAPScript: Positioning a Window (Graphic) behind the main window

Hello,
I want to print a graphic behind the main window. But I am not able positioning a window or graphic-window behind the main window. The result is that my graphic always shows up in front of the printed text of the main window and not behind the text of the main window, as I wish. I thought that the order of the windows determines which windows is on top? But I am not able of putting a window before the 'MAIN' design window.
Regards, Lars.

Hi Lars
Please check the following thread:
ABAP Development
/: BITMAP MYLOGO OBJECT GRAPHICS ID BMAP TYPE BMON
I think, trick must be in 'TYPE'.
Try to explore what options you can have (here it is BMON). I will also try.
Regards
Ashish Jain

I have apps loaded on my iPad. they show in the main screen are not available to load documents to in the window list which should appear below the main window. the same apps do appear in the sub window on my other iPad. any ideas?

i have apps loaded on my iPad. they show in the main screen are not available to load documents to in the window list which should appear below the main window. the same apps do appear in the sub window on my other iPad. any ideas?

From what I can see, unless you're doing things with old versions of Xcode on a Mac (in which case, the solution seems to be to upgrade to the latest version), this seems to e an iTunes issue.
Accepting that it works fine with another iPad, I suggest trying the following:
1. Restart the non-working iPad
2. If that doesn't work, reinstall iTunes. If you're on a Windows PC, I suggest using Control Panel to uninstall all the Apple apps, restarting the PC, and doing a fresh install. If you're using a Mac, a repair permissions might help too.
iTunes 10.3 is now available, and that may make a difference.

When I select a bookmark, the page opens on the left instead of in the main window?

Most bookmarked pages replace the page being displayed. But one of them keeps popping up on the left in a window which can only be expanded to about a third of the width. I need it to open in the main window rather than in the left hand column. Perhaps I should delete the bookmark for this page and try setting it up again so it will behave "normally"?
Thanks for your help!
Bill

Opening in the Sidebar is the default action for bookmarks that are created via a "Bookmark this Page" link or button on a website. Make sure you use the many "Bookmark this Page" methods that are in Firefox instead.
Right-click that bookmark and select '''Properties''', then un-check the preference for '''Load this bookmark in the sidebar''', and then click Save.

Customizing the main window border

Is it possible in JavaFX 2.0 to customize the main window border?
In particular I'm interested in reproducing what Mozilla have done with Firefox 5/6 on Windows 7 where there is a custom button on the title bar and the glass style border protrudes into the client area to the right of the tabs.

I'm guessing not...

How to create a dialog window with no button that opens along with the main window?

When the main window is open, the dialog window opens up immediately and can be closed by key press. At other times, when the next step, ie: decision, comes to, the another dialog window pops up again and is again closed by key press. Does anyone know how to do? Use the sub-Vi? notification method? occurrence method?
And another thing: how to create a reusable dialog window with no button so that different messages can be sent to it and it can closed by key press. And how to pass the string to the title of the dialog window programmatically?

For your functionality (If I understand it right), nothing needs to be in the event structure. Pressing any key just triggers the event, thus finishing the VI (there is no while loop).
Could you tell me what you mean my "it won't run properly"? Make sure that the front panel of the subVI is closed before starting the main VI. Remember that the subVI is set to "open when called" and "close afterwards if originally closed". So, if you had the panel open already, it won't of course close when finished!
(Actually, the problems is worse when you have the subVI panel open when starting the main VI. you get a catch22 and labVIEW locks up because (1) the subVI is set to dialog and grabs all attention but (2) it has not been
called, thus the event cannot be triggered. So don't do that!!!! As a quick workaround, add the modification shown in the attached image to ensure the panel of the subVI is closed.)
LabVIEW Champion . Do more with less code and in less time .
Attachments:
CloseNoButtonDialog.gif ‏3 KB

On the main window, what is the column to the left of client status icon?

Similar Messages

Maybe you are looking for