On the side of my macbook pro, there is a round button with dots beside it. What is this?
What is the button on the side of macbook pro. There is a bunch of dots beside it that look like possible lights? What does this button do? and Should i touch it or not?
It's a battery meter.
You can press the button whenever you want to see the current status of the battery charge.
Similar Messages
-
I have a MacBook Pro (2011 Model & 13") and I was wondering . . . What is this black dot on the side of my MacBook Pro? What is it for and how do I get to it?
P.S. I feel stupid asking this question . . .. . because I know those who answer will know exactly about it and what to do with it . .To be honest when I first got it, I thought I broke that hole . . . see I assumed it was a button to eject the CD slot, and I managed to either push it in deep enough, or smash it off. . .. . I once got a tooth pick and fiddled around in there in atempt to find something. . ..
-
Recent convert to Apple. Previously, I backed up my family pictures from PC to an external hard drive, a WD MyBook 3T. I can view the pics on my Macbook Pro, but I can't add new pictures. I'm sure this is a format issue, any easy way to correct it?
Install NTFS 3G
http://macntfs-3g.blogspot.com/
If you were going to be reading and writing to a NTFS System Partition, you might have to worry about the instability messing up the operating system. However, you are reading/writing from a non system, backup device so you don't have to worry about screwing up an operating system.
I would still temporarily move my data to another device and reformat the drive for Mac OS X Extended. -
The photos on my iMac have been modified to be read by iLife 11 (which is installed on my MacBook Pro). Now I am unable to view my photos on the iMac as I have an older version of iPhoto installed. Can this modification be reversed perhaps using time-machine?
No, Library conversion to iPhoto 11 is one way only. You will need to upgrade you iMac to iPhoto 11.
-
I'm usually good at backing up my photos and documents, but the last 2 months of pictures and videos are on there and not backed up anywhere. I'm heartbroken.
"What are the odds that my hard drive will be salvageable?"
Very very good, it's all sealed and only a large electrical surge or dropping it while running could do some damage.
Take it and use a SATA to USB adapter you can get online for $12-$40 and hook it right up to the new Mac and use Setup Assistant or Migration Assistant to transfer files.
OR you can access the drive directly and on a PC with MacDrive installed.
However the Mac itself is likley a goner. -
If anyone knows how to undo this, I would greatly appreciate it. Clearly I am outsmarted by a 2 year old!
Maybe your child likes "negative-image" ... who are you to judge?
-
Anyone know how to fix this?
This may be the TTY symbol. Go to Settings > Phone and disable TTY.
-
How do I get the keyboard on my macbook pro to light up?
how do i get the keyboard on my macbook pro to light up?
Welcome to Apple Support Communities
What MacBook Pro have you got? Only Unibody MacBooks Pro (Late 2008 and newer) have a backlit keyboard. If you have one of these MacBooks Pro, you can set up its illumination in System Preferences > Keyboard. See > http://support.apple.com/kb/ht4882 -
The Superdrive on my MacBook Pro ejects audio CDs just a few seconds after inserting them. This happens both with original audio CDs I have bought in music stores AND with audio CDs I have recorded myself, on the very same computer, via iTunes. The same does NOT happen with data CDs (e.g., stuff in mp3 format), which are read just fine. This behaviour started a couple of weeks ago, until then everything had worked just fine for years. I am running iTunes 11.1 under Snow Leopard 10.6.8. Any idea?
FabrizioYou could also try a SMC reset:
Resetting the SMC (System Management Controller) on Intel-based Macs:
http://support.apple.com/kb/ht3964 and
http://support.apple.com/kb/HT1237?viewlocale=en_US -
How do I install sound drivers on the PC side of my MacBook pro
My son used bootcamp to create a PC side of our MacBook Pro. However, now there is no sound. I asked about it on a previous post, and was told to install the drivers from the installation discs. However, neither of us knows how to access the discs from the PC side. I could use some step-by-step instructions.
AND, another issue: I tried to download a massive (3.2GB) program (for a school course) and was unable to do so on the PC side because of corruption (SLLLOOOOWWW download speed). So I downloaded it on my eMac and transferred it to the PC side of the PowerBook via flash drive. I was able to install it, no problem (or so I believe), but then I couldn't open the program. The only desktop icon was the Install package (.dmg). I went in to the 'programs' section (of the PC) and tried to select it there, but again there was no icon to open it. Any suggestions?
Thanks.
Fred J.Hi again Bob,
When I went to that link about Bootcamp, it didn't tell me how to do the thing I really need to do. I can boot up into windows (hold down alt. key while restarting, right). But how do I ask Windows to find the right drivers? As you can see, I'm clueless on this. I need a step-by-step set of directions. Do you know of any post that has them? And if I have to "manually go to the device site", I assume that that means that the drivers don't exist on the Mac install disks. What device site would I go to?
About the PC program, I may not have been clear enough. The program I downloaded was not in Mac format. I didn't try to open it or run it on the Mac. I just spoke to the people who make the program and they say that, yes, it is possible to do what I did; the problem has to do with serial #'s of some sort. I'll let you know how it turns out.
TIA
Fred J. -
when printing from aperture my margins are unequal, even if i set my margins they come out bigger one side and not the other. i am using a macbook pro running osx lion and printing with a canon pro 9000.
please can anbody help or advise?You didn't mention any color calibration being done on your monitor. This is an essential part of any color-correct workflow. What are you using to calibrate your monitor (and your printer)?
Print profiles (for soft-proofing as well as printing) are for specific combinations of paper & printer. The nine you have are each, most likely, for a common paper (perhaps mfr'd by Canon) to be used with your printer.
I don't know what you mean when you say "I choose a high standard print option".
Have you read the User Manual chapter on printing?
Printing Your Images
There is also a good appendix on calibration:
Calibrating Your Aperture System -
HT204347 is there any other place that the serial # for a MacBook Pro can be found?
Is there any other place that the serial # for a MacBook Pro can be found. I purchased this on Ebay and it functioned fine for 6 months and then it comes on with a blank screen.
On mine at least, it's etched into the bottom cover. It's very tiny and on the screen hinge side of the casing.
-
I have plugged a portable battery to the USB and my macbook pro stopped working after that, right before it shut down there was a message on the screen that said something like " USB device is withdrawing so much power, please disconnect and connect again?
if the device I connected have caused this, shouldn't the macbook itself have some type of protection that should prevent this from happening.
because when I took it to an apple certified maintenance shop, the guy said that now it could only run while connected to the power. it won't run on batteries. and that I have to change the motherboard.
can I just replace the damaged part only, would apple consider this as a design issue and they could pay for it, or should I just buy a new motherboard for 800$.
Help.BB1B2,
The problem is in finding a tech shop that will/can do board level repairs on Macs. They are few. And I certainly wouldn't spend $800 on a new logic board - I would replace the computer if I had to pay that much!
You could call around to a few repair shops and see if they feel competent to isolate the problem and do a board level repair - but I'm afraid, in the end, that your search will be futile.
Sorry,
Clinton -
Is there a way to remove, clean, and safely re-affix the keys on a macbook pro without causing damage.... or is it best to let the Pro's do it?
i would let the pros do it. ive dismantled my mbp before and its a pain with all the little parts. you basically have to remove everything from the bottom up (logic board, ram, all cables, cd drive) to get to the keyboard.
how much junk you got under those keys? the space between the metal and keys are small, unlike a pc laptop (though most pc laptops have easier keyboards to remove) . -
How do I transfer document files from my hp laptop to the windows partition side on my macbook pro?
Windows LAN file sharing, usb thumb drive, external hard drive, online cloud file sharing service, email attachments, ...
Maybe you are looking for
-
An " " symbol at the top of each JavaHelp page?
Hello all, I have generated JavaHelp off an imported Word 2007 document on a Windows 7 box. Interestingly, an unsightly ">" (the greater than sign) is appearing at beginning of each help page when ported to my Fedora 13/Linux box. The preview of th
-
SYBASE 11.5 to Oracle 8i woes
Just installed workbench 1.2.5 and am trying to migrate a small SYBASE 11.5 database to Oracle 8i. Capture wizard starts to load up the MASTER database table SYSLOGIN and I get an ORA-12571 error and Workbench goes poof! I've upgrade the ODBC drivers
-
Report for previous week Sunday to Sunday
Hello experts, If I run a report on monday and my reporting period is from sunday to sunday then will the following logic suffice WHERE DATE_CREATED >= TRUNC (next_day (sysdate, 'SUN')) - 14 AND DATE_CREATED < TRUNC (next_day (sysdate, 'SUN')) - 6 i.
-
When I create a reminder the date/time will not stay attached to the reminder. It initially sets then drops off. Any ideas?
-
Printing using other applications
My boss wants to print his iPhoto images using Canon's Easy PhotoPrint. Is there a way to make a contextual menu item in iPhoto that sends a reference to the image to Easy PhotoPrint for printing? Or are we stuck with using the AppleScript-menu to se