On trying to export from applications all my files come up error

Tried to export a clip and a still from FCP7 and the error box comes up. Also have the same problem exporting from MPEG stream clip

Exactly what error message comes up?  What does it say?

Similar Messages

  • Lightroom stalls on trying to export from the book module

    Lightroom stalls on trying to export from the book module to either PDF or Blurb. Progress bar at the top left just shows "Exporting book...rendering cover.untitled DNG". I have even tried a single page low resolution book but no difference. This happened in Lightroom 4 and still after upgrading to Lightroom 5. I have tried I have tried also unchecking all the background options.

    When you click on <Send Book to Blurb> a dialog should come up that asks for your ID and password for your Blurb account. I don't know if Blurb ships to Norway - you probably can find out at the Blurb website. But I don't think that this is the problem here since you also cannot export a PDF or JPGs.
    I don't know of any specifics why this is not possible for you but it's worth trying to replace the Preference File.
    This file can go "funny" and is then responsible for all kinds of strange behavior of Lr. The remedy is replacing the Preference File. 
    BTW: Re-installing Lr or updating / upgrading Lr does not replace the Preference File since it is designed to "survive" upgrades.
    See here for where to find the Preference file for your OS: http://helpx.adobe.com/lightroom/kb/preference-file-locations-lightroo m-4.html
    See here for how to go about Replacing the Preference File: http://lightroomers.com/replacing-the-lightroom-preference-file/745/

  • When trying to export an iMovie project I get the following error message (-108).

    When trying to export an iMovie project I get the following error message (-108)

    Hi
    Error -108 memFullErr  Ran out of memory [not enough room in heap zone]
    Turn off - TimeMachine usually works - re-try.
    (the Application down in the Dock - not the Device)
    But this can mean many thing's - My first thought is
    • Free Space on Start-Up hard disk. How much ? (other disks do not count)
    Yours Bengt W

  • Unable to export an Application to MSI File

    Hello Experts,
    I am trying to export an application which has WebDirectory in the resources to MSI File. But when I am trying to do that I am getting an error like,
    Error while exporting application "Application1" into MSI package "E:\Export\Application1.msi".
    Serializing resource (-Type="System.BizTalk:WebDirectory" -Luid="/xyz") failed.
    Unable to serialize web directory "http://localhost/xyz". Verify the location exists and is accessible
    I am not sure how can this be exported. Any help is highly appreciated.
    Thanks

    I have seen this error when you don't have  "IIS 6 Management Compatibility" option configured,
    While configuring IIS on this dev machine, have you enabled "IIS 6 Management Compatibility"
    Check the following URL for the step to configure this option
    http://sandroaspbiztalkblog.wordpress.com/2013/05/07/biztalk-2013-installation-and-configuration-enable-internet-information-services-part-2/
    http://msdn.microsoft.com/en-us/library/jj248684.aspx
    If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

  • How to have a live feed from application server log file (realtime viewr )

    how to have a live feed from application server log file (realtime viewr for apps log files)
    hi , thank you for reading my post.
    is there any way to have a live feed of Application server log ?
    for example is there any application that can watch the log file and show the changes as new log items come in ?
    can some one with more experience help ?

    Your question would be more suited to the Developer Forums
    http://devforums.apple.com
    but anyway...
    My goal is to develop a web application that is able to run on iPhone too, to capture the audio and video content from its camera and mic.
    Web Apps running in Safari don't have access to the camera or mic hardware.
    Or I should built a native application distributed through Apple store?
    That is your only option, although such a system already exists:
    http://itunes.apple.com/us/app/ustream-live-broadcaster/id319362690?mt=8

  • I am currently running 10.7.5 on my macbook. I tried downloading Mountain Lion application...but it says 'error'',,,is there another way to upgrade my OS?

    I am currently running 10.7.5 on my macbook. I tried downloading Mountain Lion application...but it says 'error'',,,is there another way to upgrade my OS?

    First we need to know which one of the 9 different models of MacBook you have. To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info (and then System Report if you’re running 10.7 Lion). When System Profiler comes up check the Model Identifier and post it back here.
    The Early 2006 model 1,1 Core Duo can only run a maximum of 10.6 Snow Leopard.
    The models Late 2006 Core 2 Duos 2,1 through Early 2008 4,1 can only run a maximum of 10.7 Lion.
    The Late 2008 model 5,1 Aluminum Unibody through the Mid 2010 White Unibody model 7,1 can run 10.8 Mountain Lion.

  • How do you remove duplicate images from your all images file on your mac desktop

    How do you remove duplicate images from your all images file on your mac desktop?

    Don't under any circumstances.
    All images is not a file. It's not a place. It's a list. Specifically, it's the result of an instruction: List all the images on my machine.
    When you delete something from All Images, then you have no idea what you're removing from where - files that are part of word processing docs, interface elements, corrupting your iPhoto Library. There are many perfectly legitimate reasons why you might have what appears to be duplicates but are not.
    Rule number One: Never delete anything on your machine whose job you don't understand.

  • Why do I get scratchlike glitches when exporting from ai to psd files?

    When I Export from ai to psd files, there are occasional horizontal dashes---one pixel high---of blank pixels. See an example:
    I had no problem with CS 2; the problem only emerged when I upgraded to CS5.

    Your example isn't showing up. Use the camera thingummy on the reply window.

  • All pdf files come up in code no optin to open with

    all pdf files come up in code no way to change to word no option to open with ?

    What is your operating system?  What is your Reader version?  What is your file association for .pdf files?

  • Getting an error message when trying to export from the Lightroom 5.7.1

    hi
    i'm getting an error message when trying to export the images from the Lightroom, all the images are on the external drive
    i'm using windows 7 with 4gb of ram core i5
    "AN INTERNAL ERROR HAS OCCURRED WIN32 API ERROR2 ("THE SYSTEM CANNOT FIND THE FILE SPECIFIED.")WHEN CALLING SHELLEXECUTEXW FROM AGWORKSPACE.SHELLEXECUTE"

    i found the answer my myself
    post processing was blank that was causing it  to happen

  • "Catastrophic Failure" trying to export from Crystal Reports Explorer v10.5

    In using Crystal Reports Explorer v10.5 (add on to Crystal Enterprise v10) I am trying to export just over 211k records to MS Word. 
    The data is coming from a Business View (created in Business View Manager) that uses an OLEDB connection to an Oracle database.
    I get the following error message:
    CrystalReportVIewer
    Error caught in ICrystalReportGridViewerImpl::render
    webReporting.dll '0x80004005'
    Catastrophic failure
    line: 16031
    I have no idea what's causing this or how to resolve it.  Can anyone assist?  Thank you!!
    Edited by: AmberDoreen on Mar 21, 2009 2:03 AM

    No - it doesn't work with any of the viewers and the same error occurs.    I think we've determined that it's due to the amount of data and the % of resource allocation in order to export the results.  The query behind the data is pretty complex, and the Oracle views that are being accessed are also pretty beefy.  It's just a huge hit on resources.  I've advised my client to provide more filters & reduce the amount of returned rows to see if that clears things up.  I'm waiting to hear if they are successful.  Thanks for responding, though!  I'll update once I hear from the client.

  • Exporting from .mpeg to .mov file loses sound

    Okays so I know that there are numerous forum discussions out there on this topic but none helped me figure out my problem so I decided to create my own.
    I'm trying to take a xxx.mpeg file and convert it to a smaller xxx_web.mov file that I can use for posting on the web and sending to friends easily over ichat. To get my mpeg file I:
    1. used mac-the-ripper to get the Video_TS folder from a DVD with now encryption.
    2. then I took that .VOB file from that and drug it into MPEG Streamclip to convert the .VOB file to an xxx.mpeg.
    All is well up till this point and xxx.mpeg plays fine with sound. Next I tried to use quicktime pro to export my xxx.mpeg file to xxx_web.mov. This gave me video with now sound
    Then I read about mpegs being muxed and I needed to demux them. So I used MPEG Streamclip to demux xxx.mpeg with the following option from MPEG Streamclip:
    DEMUX to M2V and AIFF.
    This worked succussfully as well with the M2V file playing normally in quicktime with sound. I then tried to export the M2V file to a .mov file and got the same outcome...video but no sound.
    Can someone walk me through what I'm doing wrong? Also I just started using MPEG Streamclip can it do everything i'm trying to do (meaning can I bypass using quicktime pro)?
    Thank you.

    1. used mac-the-ripper to get the Video_TS folder from a DVD with now encryption.
    If the source DVD is not encrypted, then the VIDEO_TS folder or desired non-zero title VOB series can be copied directly to your hard drive without the use of MTR.
    2. then I took that .VOB file from that and drug it into MPEG Streamclip to convert the .VOB file to an xxx.mpeg... I'm trying to take a xxx.mpeg file and convert it to a smaller xxx_web.mov file that I can use for posting on the web and sending to friends easily over ichat.
    If you goal is to create a small, web compatible file, you should convert to your final target compression format while in MPEG Streamclip. Most Apple applications use the H.264/AAC compression format for posting to web sites since it generally produces the smallest file for a given level of quality. For instance, selecting the "Export to MPEG-4..." option in MPEG Streamclip, pressing the "iTunes" button, and then selecting an appropriate size/aspect combination will automatically load user settings to create your final file. The 640x480 or 640x360 iTunes option will produce a file similar to the iTunes option in QT Pro (or iTunes) but will also retain your audio.
    All is well up till this point and xxx.mpeg plays fine with sound. Next I tried to use quicktime pro to export my xxx.mpeg file to xxx_web.mov. This gave me video with now sound
    QT Pro does not fully support multiplexed MPEG compression formats. An MPEG (MPEG2/MP2) compression format will play in the QT player with the QT MPEG-2 Playback component installed but cannot be edited or converted and retain the audio. To retain the audio, you must use a third-party, MPEG-based conversion application like MPEG Streamclip.
    Then I read about mpegs being muxed and I needed to demux them. So I used MPEG Streamclip to demux xxx.mpeg with the following option from MPEG Streamclip:
    DEMUX to M2V and AIFF.
    This work flow creates two elementary stream files. Both the M2V (with MPEG-2 component installed) and the AIFF file are QT Pro compatible. However, they must always be stored together on your hard drive. Since the M2V video file "resources" the AIFF audio in a separate file, if the files are separated, this reference will be orphaned and, as you have seen, you again end up losing your audio.
    I just started using MPEG Streamclip can it do everything i'm trying to do (meaning can I bypass using quicktime pro)?... Can someone walk me through what I'm doing wrong?
    Already covered. (See above.)
    If I export to any format (QuickTime movie, AVI, Windows Media, MPEG-4), all of the audio options are greyed out. Some say explicitly that there is no audio in the source movie. If I go ahead, I get a file with no audio.
    The "Save" and "Save As..." options do not convert the compression format. They merely take the data (which you already said plays correctly) and places it in an MOV file container where it continues to play correctly. On the other hand, when you attempt to convert the file to other compression formats (i.e., change the data within the container), then you lose the audio. As indicated above, multiplexed formats like MPEG-2 video with MPEG-1 layer 2 audio are playback only compatible with the QT structure. If you wish to convert the data to a different format and retain the audio, use a third-party, MPEG-based application.
    QuickTime is obviously able to decode the .m1a audio since it can play it. Why does it seem to not be aware the audio is there if I try to export it?
    Because QT is based on a multi-track engine that synchronizes audio and video frames with reference to external clocking. On the other hand, multiplexed content divides the audio and video into interspersed blocks of data synchronized spatially within a single data stream. QT could theoretically create two separate streams of data but has no way of synchronizing any single frame of audio with its video frame counterpart. The MPEG Streamclip engine can do this but requires the QT MPEG-2 Playback component to then bridge the gap between spatial and temporal based playback engines. Without this temporal relationship the QT player would probably return the infamous "Not a movie" message.

  • How do I stop Quicktime plugin from opening all WAV files?

    I have iTunes on my Windows 7 Ultimate computer to support my iPhone.  iTunes installs QuickTime, QuickTime installs the QuickTime browser plugin, and the QuickTime browser plugin DOES NOT RESPECT THE WINDOWS FILE EXTENSION ASSOCIATIONS.  This causes problems because I DO NOT want QuickTime to open WAV and MP3 files as I have other applications for those file types.  So my question is...
    How do I tell the QuickTime browser plugin to open file types a, b, and c, but NOT open file types d, e, and f?  I can't find the file type association dialog for the QuickTime plugin.

    Hi turningtest2,
    Actually it is linked content - pages that have links to play sound samples rather than having players built into the page, "How To" videos, etc.
    Firefox and Chrome seem to have workarounds, and in playing around with Firefox tonight it looks like using Firefox (or Chrome) will solve a lot of the issues here at home, but at the office I'm limited to IE 9, 64 bit when using a Windows 7 box.  Odd as it may seem, I have IE 8, Firefox, Chrome, Safari, and Opera on my office XP Pro box.  So, I'm having to "reverse migrate" as I move from a Windows XP Pro box to a Windows 7 box at the office, and switch from using Firefox and Chrome (XP Pro) to using IE 9 (Win 7).  Thus, the problems with the QuickTime plugin in 64 bit IE 9 are a real annoyance.
    Hmmm, so Quicktime is no longer needed for iTunes.  That's interesting.  I have iTunes at both home and office and maybe uninstalling Quicktime at the office will solve some of the problems ... except for playing ".mov" files...
    I'm considering some registry hacks for the office Windows 7 Ultimate box, but I'll have to get the sysadmin to make any registry changes.
    Have you tried any of the registry fixes?
    John

  • Exporting from Quicktime to reduce file size

    I'd like to export from quicktime to a smaller file size. That is, I have a 16.9 meg file I want to optimize for my website. When I try exporting it using the share function, there's no audio on the exported file. I've tried the Export function as well, using Movie to Quicktime movie settings, and the default H.264 compression. Same result...no audio. What settings should I use that will retain audio and shrink the file size so it'll load faster? Thanks.

    QuickTime Pro can't extract audio from MPEG-1 files (muxed) so only the video is converted.
    MPEG Streamclip (free) can export to QuickTime formats and include the audio track.

  • Unknown Error when trying to export movie with certain PNG files in Adobe Premiere

    Hi!
    I've made an animation video in Premiere Pro CC2014 combining apple pro-res live action with png animation. When trying to export, some parts of the video are no problem, and some (seemingly random) png files Adobe Premiere just doesn't like?? I don't understand why it will export some and not others?
    Help??!
    Thanks so much!!

    Error compiling movie can be anything from gap to bad clip, transition, effect, nest, you name it.
    Export from AME with preview open and watch were in the timeline it goes wrong.
    That is the place to fix it.

Maybe you are looking for