On TV Shows, what does "Buy Multi-Pass" mean?

I just bought "$9.99 Buy Multi-Pass" for a TV show. The store then downloaded 1 episode. There are eight available. iTunes store says I have NO downloads available. What did I buy for $9.99? One episode which normally costs $1.99? I can find NO explanation for "Buy Multi-Pass" anywhere on iTunes or Apple's web site.
I just need a simple explanation.
Thanks

I have found a partial answer. By scrolling through "iTunes A to Z" which I found while clicking around on the iTunes tab on the Apple site (NOT by ANY search, NO search I performed resulted in any information whatsoever for "multi-pass".
Here is what it says about "Multi-Pass" which can be found way down several pages under the heading "Purchasing TV Shows:
Season Pass and Multi-Pass
A Season Pass gets you a whole season of a TV show, past or present, at a discount. And Multi-Passes for shows that air every day, like The Daily Show with Jon Stewart, mean you can enjoy a month’s worth of episodes downloaded automatically to your computer.1
It's shortcoming is that it doesn't explain when "a month's worth of episodes" starts ans ends. So, my new question is: Do I get all the shows starting the 18th of October through the 17th of November or do I just get through the end of October?
roaminggnome: Thanks! You helped me in that you encouraged me to dig a little deeper even though searching in the support box didn't yeild any useful results.

Similar Messages

  • What does buying a sim card for iphone do? Price?

    What does buying a sim card for iphone do? Price?

    Sim Card is what makes a phone a phone 1 sim Card Will MAKE it run on at&t network another on tmobile or vodaphone or o2 or orange

  • TS1717 What does mzcommerce.credit balance mean? I can`t buy anything on the app store because I get this message?   Read more: What does mzcommerce.credit balance error mean on itouch? - Getting this message while trying to download apps all of the sudde

    What does mzcommerce.credit balance mean? I can`t buy anything on the app store because I get this message?
    Read more: What does mzcommerce.credit balance error mean on itouch? - Getting this message while trying to download apps all of the sudden :

    i just received the same error.. checked everything in my account and cant find anything wrong.. i have also been getting some weird imap.gmail server not found i looked through all the boards and nothing is working.. i just recently upgraded to ios 5 and thats when the issues started

  • I have many photos that are visible as thumbnails in the Pictures Library, however when I try to open them in a big screen they show a back screen with an exclamation mark in a triangle.  What does this exclamation mark mean ?

    I can see my images in the libarary as thumbnails but when i try to edit/email some of them become Exclamation Marks in a triangle.
    What does the exclamation mark mean and how to i retrieve the photo

    The exclamation make is an indication that iPhoto has broken the file path to the original photo.
    Make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Select the options identified in the screenshot. 
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • What does the apple sign mean when sometimes it shows ?

    What does the apple logo mean when sometimes i turn it on it just pops up and goes back to normal??

    Ayip,
    The Apple logo appearing on your iPod nano is your nano's start-up icon. Normally, when you turn off your iPod nano, you are really putting it into a deep or semi-deep sleep, where it is ready to turn on at the push of a button and resume where you left off in your Now Playing list.
    If, however, you leave your iPod in a sleep mode for some time , it will shut down. To turn it on again, you'll need to hit the center button (deep and semi-deep will wake up with any button press). When turning the iPod on from a shut down state, it will display the Apple logo while loading your music iPod software.
    Hope this helps!
    Sincerely,
    -FD

  • What does this message icon mean on a blackberry​?

    What does this message icon mean on a blackberry? so when i send a text message it normally place a check mark with a small D above it. But i just got one with just a check mark, with no D above it. and i was wondering what it meant? oh and i have the blackberry tour, but it may be the same on all blackberry phones.

    check means sent over network
    D means delivered.
    R means read.
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

  • What does doa cover. i mean i brought  a macbook 6 days back and it uses to restart  when its powerd off nd lid closed it has kinda defective power key also. can it be treated as doa

    what does doa cover. i mean i brought  a macbook 6 days back and it uses to restart  when its powerd off nd lid closed it has kinda defective power key also. can it be treated as doa

    DOA means different things to different manufacturers. For some DOA means it fails to work out of the box and will be replaced but if it worked out of the box and failed the next day it will be repaired. For other companies there is a liberal return policy - for Apple if you buy direct from Apple (online or an Apple store) you have 14 days to return. That means you can return a defective computer and then turn around and buy a new one.
    (I had a store manager try to get me to accept a repair on a computer with a bad keyboard out of the box. I refused and insisted on a full refund if she wasn't willing to replaced it.)

  • What does error code -5016 mean?

    What does error code -5016 mean?  My computer spits out my DVD or CD.

    At random places in my packages, I randomly (not always) get this general netwrok error (I am including the first line just to show the line right above the error line):
    Information: 0x400490F4 at Data Flow Task - my task 1, Lookup - my lookup task 1 [234]: component "Lookup - my lookup task 1" (234) has cached 13312 rows. Error: 0xC0202009 at Data Flow Task - my task 1, Lookup - my lookup task 1 [234]: An OLE DB error has occurred. Error code: 0x80004005 An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server" Hresult: 0x80004005 Description: "[DBNETLIB][ConnectionRead (WrapperRead()).]General network error. Check your network documentation." Error: 0xC020824E at Data Flow Task - my task 1, Lookup - my lookup task 1 [234]: OLE DB error occurred while populating internal cache. Check SQLCommand and SqlCommandParam properties. Error: 0xC004701A at Data Flow Task - my task 1, DTS.Pipeline: component "Lookup - my lookup task 1" (234) failed the pre-execute phase and returned error code 0xC020824E.
    FYI - I am using June CTP.
    thanks,
    Nitesh

  • What does error code 0x80004005 mean?

    What does error code 0x80004005 mean?

    At random places in my packages, I randomly (not always) get this general netwrok error (I am including the first line just to show the line right above the error line):
    Information: 0x400490F4 at Data Flow Task - my task 1, Lookup - my lookup task 1 [234]: component "Lookup - my lookup task 1" (234) has cached 13312 rows. Error: 0xC0202009 at Data Flow Task - my task 1, Lookup - my lookup task 1 [234]: An OLE DB error has occurred. Error code: 0x80004005 An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server" Hresult: 0x80004005 Description: "[DBNETLIB][ConnectionRead (WrapperRead()).]General network error. Check your network documentation." Error: 0xC020824E at Data Flow Task - my task 1, Lookup - my lookup task 1 [234]: OLE DB error occurred while populating internal cache. Check SQLCommand and SqlCommandParam properties. Error: 0xC004701A at Data Flow Task - my task 1, DTS.Pipeline: component "Lookup - my lookup task 1" (234) failed the pre-execute phase and returned error code 0xC020824E.
    FYI - I am using June CTP.
    thanks,
    Nitesh

  • What does this error message mean: "Filename: Mips32.ari TFTP Error: 'File not found' in AP-105"?

    Question: What does this error message mean: "Filename: Mips32.ari TFTP Error: ‘File not found’ in AP-105"?
    Product and Software: This article applies to AP-105.
    The root cause of this error is that the AP cannot perform a code upgrade.
    Scenario 1
    Check the ArubaOS code.
    The minimum requirement to bring up an AP-105 is ArubaOS 3.3.3+ or ArubaOS 3.4.1+.
    If the controller is running pre 3.3.3 code, upgrade the code to fix the issue.
    Scenario 2
    If the AP is not connected to the controller directly, bring up the AP in the controller and then connect it to the desired location. This process loads mips32.ari to the AP so that the AP can upgrade the code.
    Scenario 3
    The AP has no power adapter and you want to use the PoE feature. A few controller series like the 200 and 3000 Series do not support PoE. In this case, the AP cannot be terminated physically in the controller. Instead, connect the AP to the PoE switch, which is connected to the controller. Then assign a static IP configuration for the AP using the following commands:
    apboot> setenv ipaddr <ip address>
    apboot> setenv netmask <netmask>
    apboot> setenv gatewayip <ip address of the gateway>
    apboot> setenv master <ip address of the master>
    apboot> setenv serverip <ip address of the TFTP server>
    apboot> setenv bootcmd tftp
    apboot> save
    apboot> boot
    Locally configure the TFTP server for the AP and load the mips32.ari file from the controller with the help of the TFTP application.

    I want to download this file Mips32.ari for AP-105 device. Please give me this file download link. APBoot 1.2.4.4 (build 26618)
    Built: 2011-01-07 at 13:42:04Model: AP-10x
    CPU: AR7161 revision: A2
    Clock: 680 MHz, DDR clock: 340 MHz, Bus clock: 170 MHz
    DRAM: 128 MB
    POST1: passed
    Copy: done
    Flash: 16 MB
    PCI: scanning bus 0 ...
    dev fn venID devID class rev MBAR0 MBAR1 MBAR2 MBAR3
    00 00 168c 0029 00002 01 10000000 00000000 00000000 00000000
    01 00 168c 0029 00002 01 10010000 00000000 00000000 00000000
    Net: eth0
    Radio: ar922x#0, ar922x#1Hit <Enter> to stop autoboot: 0
    Checking image @ 0xbf100000
    Invalid image format version: 0xffffffff
    Checking image @ 0xbf800000
    Invalid image format version: 0xffffffff
    eth0 up: 1 Gb/s full duplex
    DHCP broadcast 1
    DHCP IP address: 192.168.x.xx
    DHCP subnet mask: 255.255.255.0
    DHCP def gateway: 192.168.x.xx
    DHCP DNS server: 192.168.x.xx
    DHCP DNS domain: xx
    ADP multicast 1
    ADP broadcast 1
    ADP multicast 2
    checksum bad
    ADP broadcast 2
    checksum bad
    ADP multicast 3
    checksum bad
    checksum bad
    checksum badRetry count exceeded
    DNS request 1 for aruba-master to 192.168.x.xx
    checksum bad
    checksum bad
    checksum bad
    T Using eth0 device
    TFTP from server 192.168.x.xx; our IP address is 192.168.x.xx
    Filename 'mips32.ari'.
    Load address: 0x2000000
    Loading: checksum bad
    T T checksum bad
    T checksum bad
    checksum bad
    checksum bad
    T checksum bad
    checksum bad
    T T checksum bad
    T checksum bad
    checksum bad
    T T T
    Retry count exceeded; starting again
    eth0 up: 1 Gb/s full duplex
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum badARP Retry count exceeded; starting again
    eth0 up: 1 Gb/s full duplexchecksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad  ThanKs :)
     

  • I got an iphone from Hong Kong which is locked one. Can anyone explain me what does a locked iphone means. How do I use it in India now, with my own sim card. How do I unlock it???

    I got an iphone from Hong Kong which is locked one. Can anyone explain me what does a locked iphone means. How do I use it in India now, with my own sim card. How do I unlock it???

    If your iPhone is locked to a wireless provider, only that wireless provider
    can unlock it. Contact the wireless provider in Hong Kong to see if they
    offer unlocking and if you qualify.
    If your iPhone is locked to an AppleID that you do not know, return it for
    a refund as it is useless. Only the person whose AppleID was used for
    activation can remove the lock. There is no workaround for Activation Lock.
    If neither of the above is what you are facing, provide more detail so someone
    may offer a solution.

  • I was playing with my ipad settings (it's an older model) and noted in the advanced settings of Safari there was a place to view website databases.  When I clicked on this I saw websites.  How do these get there and what does the space amount mean?

    I was playing with my ipad settings and noted in he advanced settings of Safari there was a place to view "website databases".  When I selected this I saw a multitude of websites.
    Can anyone tell me how these get there?  Can a website be posted even if it was never went to?  What does the space amount mean?  For example, 1.5 kb...is this quite a bit?  Would it indicate someone has gone to a site multiple times?
    I share my ipad with my teenage daughter and I'm trying to find out if she's lying to me.  Obviously she's swearing that she has "no idea" how these got there and I'm trying to keep her safe (she's only 14).
    Thanks everyone.
    Concerned Mom

    Think of your PC and the 'temporary internet folder' where it keeps cached copies of web pages or elements off a web page for 'quicker display the next time you visit'. That's pretty much what that folder is. 1.5K is tiny. Probably just a basic page with some text on it. (you might be confusing 1.5K with 1.5 megabyte....megabyte is large...it's roughly 1000 kilobytes, so the 1.5K is a tiny file)
    As far as I know, the only way info gets into that folder is if the browser has been to that site.
    if you have a concern there are browsers out there, McGruff is one i've seen recommended, that allow some degree of parental control and supervision. That or you could passcode lock the iPad or enable the restrictions to turn off some parts of the device to have some control.

  • What does (error code -600) mean?

    What does (error code -600) mean?
    I received this code in a pop up window while trying to open iTunes from my Apps folder.

      procNotFound             
    = -600, /*no eligible process with specified descriptor*/
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
    Any change?

  • What does "extracted channel PDF" mean and why does it continually duplicate on my desktop?  I think it happens when I move a file in Finder to another file and when I copy some web files.  How do I avoid this on my Mac (Mavericks)?  Thanks for your help!

    What does "extracted channel PDF" mean and why does it continually duplicate on my desktop?  I think it happens when I move a file in Finder to another file and when I copy some web files.  I have to immediately move to trash all the duplications on my desktop.  How do I avoid this on my Mac (Mavericks)?  Thanks for your help!

    What application is set to open PDF files? If you CNTRL click on the file and open with Preview does the problem occur?
    If not change the default application to open PDF files to Preview.
    You can do this by highlighting the file and either use CMD i or Get Info , this will open a window with the info on the file with an option to change the application that opens the file.
    That's all I can think of.

  • I understand that when using Numbers/Pages - an up-arrow on a document means that the file is still to be uploaded to the cloud, what does a down arrow mean? It seems the document can't be accessed until the arrow clears.

    I understand that when using Numbers/Pages - an up-arrow on a document means that the file is still to be uploaded to the cloud, what does a down arrow mean? It seems the document can't be accessed until the arrow clears.

    I believe what it's supposed to mean is that some changes were made to the document on another device, and those changes were saved back to the cloud.  Now you've opened iWork on a different device to access that document - it compares the document you've got locally with the one in the could, sees some recent changes and downloads them.
    What gets me is why this sometimes happens even when I've not made any changes to a document from another device.

Maybe you are looking for

  • I have apple tv, but I can not figure how to connect my macbook to airplay

    I want to learn how to use my macbook pro with apple tv.  I am not sure if there is something else I need to purchase to do this.  I would like to play a Powerpoint presentation on my television but can not do that. 

  • Mac Mini Server 2011, with lion, sleeps every day

    My new Mac Mini Server 2011, with lion, sleeps every day! Server not responding. All services are down, smb, vnc, ssh too. And it not should be happen because this is a server, right? Please, I need help with this problem! How to fix it?

  • Time Machine wiped out my entire hard drive with all of my family photos

    I am a new mac owner and i hooked up my WD external hard drive to my new imac. i was familiarizing myself with the applications and i clicked on time machine. it asked me to select a drive to use for the backup and i of course selected my external ha

  • Dunning for customers.

    Hi All, Can anybody tell me the process of Dunning for customer? ie. how to assign dunning procedure, with frequency, amount,how to send dunning letters to customer etc... regards, Amol

  • Parent window goes back on closeing the model dialog

    Hi, I have application which will show the model dialog in the middle of the operation. In that, once I close the model dialog the main application is going back to other applications opened in my machine. My Sample Code import java.awt.event.ActionE