On verbose mode i get the next leyend, CSRUSHBBluetoothHCIcontroller: setupHardware super returned 0, invalid node structure (4,14279), my bluetooth is doomed and so my macbook or just change it?

end yes i got the macbook summer 2006 still working and sharp, got this problem,
CSRUSHBBluetoothHCIcontroller: setupHardware super returned 0, invalid node structure (4,14279),
and it shut down
im thinking of open it up and check the bluetooth chip, or antenna, if something is not in place, or someone knows another way ?

there is nothing out of place, i reinstall mac os 10.6 and i run disk first aid, and it says my disk is ok, still it turns off random

Similar Messages

My iphone 3gs is not working properly, when switched on it says 'Update Completed' as though it has just been updated. On the next screen it says to 'Connect to iTunes'. It doesn't, however, connect to iTunes and more often than not just resets itself.

My iPhone 3gs is not working properly and hasn't been since about September of last year. When switched on (Quite often it won't even turn on) it says 'Update Completed' as though it has just been updated. On the next screen it says to 'Connect to iTunes'. It doesn't, however, connect to iTunes and just resets itself over and over until power is gone. Occasionally after switching on and off a few times it functions normally for a few hours and some times even a couple of days but eventually always turns itself off and goes back to the 'Update Completed' screen. Does anyone know what might be causing this and/or a way of fixing it?

Morning JordenR,
Thanks for using Apple Support Communities.
You can resolve many restore issues using the troubleshooting steps documented here.
For more information on this, take a look at this article:
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/ts1275
Best of luck,
Mario

I got the dreaded "Invalid Node Structure" Error

Hi All,
I entered the Mac world recently with a spanking new Macbook Pro 15". Updated it online to the latest OS 10.6.4 Snow Leopard.
Today I was trying to install some more free application from the Official Mac Software Site. After installing a couple of softwares, I popped in the included recovery Disk and tryed installing xcode from the 'additional software' folder on the disk. But this failed
After this I thought of restarting the mac and try again. However, the **** thing now wouldn't boot anymore. Just stays on the Gray apple screen with the small ring rotating below it for ever.
Then I tried repairing it using the Disk Utility booting form the DVD. On verify Disk, it shows 'Invalid Node Structure'. So I clicked 'Repair Disk', And it just stayed there for ever without any progress. So I stopped it. And after trying the above 3-4 times, I Hard rebooted the system, and this time entered the console mode (Command + s).
Entered the command fsck_hfs -rf /dev/disk0s2 (disk0s2 is what Disk Utility showed me).
The output of this command shows:
** /dev/rdisk0s2
Executing fsck_hfs (version diskdev_cmds-491.0.2~7).
** Checking Journaled HFS Plus Volume
** Checking extents overflow file
** Checking catalog file
** Rebuilding catalog B-tree
disk0s2: I/O error.
disk0s2: I/O error.
disk0s2: I/O error.
disk0s2: I/O error.
disk0s2: I/O error.
disk0s2: I/O error.
disk0s2: I/O error.
disk0s2: I/O error.
disk0s2: I/O error.
disk0s2: I/O error.
And this goes on and on and on.... :((
Now what to do???

Hmmm, yeah that could be the last option, but I can't format the disk right now, 'cause I've some extremely important (not-yet-backed-up) files in it
So I'd like to try out all possible ways to recover the system before even thinking of a format!
BTW, the above fsck_hfs command I ran was by booting from the DVD itself.

The term "invalid node structure"

can anyone out there explain (in real simple terms please) what "invalid node structure" means. this appeared when i ran disk utility and attempted to verify my start up disk. one day the disk was perfect, the next day it had invalid node structure and "needs to be repaired". so i started up from the install dvd and then ran disk utilities on the offending disk. the start up disk then indicated all was perfect. i restarted from the normal drive and again ran the utilities test. all is fine. so what is a node and how does it become invalid structurally and why did it get well by itself????

Google "invalid node structure" and you'll find many mentions of this problem. It basically means a directory entry on your disk has become corrupted. Running Disk Utility's Repair Disk option can sometimes repair the problem. If not, Disk Warrior from http://alsoft.com/ is my disk repair tool of choice.

How do I get the Next Button to appear on a form?

I have a form built off of a view. I pass a parameter from a report through a link to launch the form with the appropriate values. I would like user to then be able to navigate to the next set of information from the report without having to navigate all the way back to the report. I tried to activate the Next button with the onClick event and doNext function but the button never appears to the user. Thank you for any assistance!

Samuel,
The reason that you don't get the "Next" button is that the query that the form is running on returns only one row. Take a look at EXAMPLE_APP.EXAMPLE_SQL_REPORT and EXAMPLE_APP.EXAMPLE_FORM. You'll find that this form also does not show the "NEXT" button when called from the report. However if you edit the report and change the link parameter from empno to deptno, you'll find that the button comes up in the form.
I guess the best option you have is to create a custom button that simulates the functionality of the NEXT button i.e. have some logic to find out which empno must be the next one and then call the form like this :
l_empno := <whatever logic you have come up with>
l_url:=<portal_schema>.wwa_app_module.link?p_arg_names=_moduleid&p_arg_values=<module_id of the form>&p_arg_names=empno&p_arg_values='||l_empno||'&p_arg_names=_empno_cond&p_arg_values='||<portal_schema>wwv_standard_util.url_encode('=');
<portal_schema>.wwa_app_module.set_target(l_url, 'CALL');
Hope that helps,
Hsiu

When i run a sequence with ivi step types in simulation mode i get the error code number BFFA0015 - Types do not match.

When i run the sequence with ivi step types in simulation mode i get the error Types do not mathc. The step that generates this error is an IviScope step type and is configured as a measurement. Th weird thing is that in real mode is working perfectly. I have three measure steps and i get the error in all of them. The exact error message is:
UUT Result: Error, Error executing substep 'Post'. An exception occurred calling 'RunStep' in 'ISubstep' of 'TestStand Ivi Step Types 1.0 Type Library' An error occurred while executing the step. Component Works IVI Control Error: The IVI Read operation failed on channel '1' for logical name 'SampleScope'. Details: (1
) Types do not match. [IVI Error Code: BFFA0015] Source: TSIviStepTypes [Error Code: -30721, User-defined error code.]
Can someone tell me how to fix this problem?. It seems to me that the simulation generates a diferent type of measurement of that generated in real mode.

Update:
The simulation driver appears to be raising the error. By switching to specific driver simulation the error does not occur. This may be a problem in either the class simulation driver or the specific driver.
Scott Richardson
National Instruments

How to get the next FACTORYDATE

Hello all,
Can somebody show me how to get the next (FACTORYDATE) from SAP in the objective to check and validate the shipto date in the ISA b2b application.
Thanks in advance.

Hi Manuel,
my email: [email protected]
thank you in advance,
Djamel.

Is there some way of getting the next character

asdf sa fsadf >
asdfsadfasdfasf> d
adfsasdfasdfsdf
Say you want to get a string after the ">". So you call
s.substring(s.indexOf('>'+1))
but there could be two cases. There is another character after the ">" in which case it works but it could be the end of the line and so if you have the '>' + 1 you get a string out of bounds exception. How do I deal with this problem?

get the index of the '>' character using indexOf()
Check if the (index+1) == the string's length.
if yes, then it was the last character, else you can
get the next character at index+1.

I get the next mistake (fout is the dutch word for Mistake): "Fout: uncaught exception: [Exception... "Component returned failure code: 0x80520015 (NS_ERROR_FILE_ACCESS_DENIED) [nsIDownloadManager.userDownloadsDirectory]" nsresult: "0x80520015 (NS_ERROR_

OS: win XP pro SP 2
I tried to download a pictures at a number of sites, but I never succeed.
I installed some suggested add-ons to help the download proces: 'downthemall' and 'downloadhelper' but they didn't help. I went to help and did the suggested action by means of 'about:config' to fix the problem but still I get the next failure. I would be pleased if anyone can explain what it means. I would be even more pleased if anyone could solve this.
== This happened ==
Every time Firefox opened
== from the moment I installed firefox

Additional info: the following message is repeatedly logging in my error console:
Security Error: Content at http://googleads.g.doubleclick.net/ may not load data from http:...
The info following the second http:// depends on the website. I am getting this message at google.com, userscripts.org, digitalopint.com, and others.

I have os x 10.5.8, how do I get the next software upgrade?

I have os x 10.5.8, how do I get the next software upgrade? I'm willing to pay if I have too. Please help, i'm clueless

Go to Apple menu -> About This Mac. If it says iMac G5, you are at the max you can go. If it says iMac Intel CoreDuo and has at least 1 GB of RAM, you can go up to 10.6.8 with stedman's link, but the static version of that link is:
http://store.apple.com/us/product/MC573Z/A If it says iMac Intel Core2Duo and has at least 2 GB of RAM you can go up to 10.7, but need to get the above DVD, and upgrade to 10.6.6 or later to get the App Store, and then finally download 10.7. A USB flash drive version of 10.7 should be out later this month, and it is unknown if it will allow you to skip 10.6 or not. See my upgrade FAQ* for pitfalls you may run into each:
http://www.macmaps.com/upgradefaq.html

Function module to get the next new 12 months of a year

Hi All,
I have a requirement to get the next new 12 months of a year from the current month , i.e. if my current month is June 2009 , I need to get June 2009, July 2009,...................., May 2010 .
Does anybody know if there is any function module for this or is there any logic to implement this .
Please could someone help me out with this.
Regards,
Sushanth H.S.

Dear Srinivas,
Have a look at the below code. It works fine. Change according to your req.
REPORT ztest_notepad.
DATA:
      month_index TYPE i,
      wa_t015m    TYPE t015m,
      it_t015m    TYPE t015m OCCURS 0 WITH HEADER LINE.
DATA:
      BEGIN OF it_next12 OCCURS 0,
        months_12 TYPE string,
      END OF it_next12.
PARAMETERS:
      p_month TYPE num2,
      p_year TYPE num4.
START-OF-SELECTION.
SELECT * FROM t015m INTO TABLE it_t015m WHERE spras = sy-langu.
READ TABLE it_t015m INTO wa_t015m WITH KEY monum = p_month.
IF sy-subrc = 0.
    month_index = sy-tabix.
    LOOP AT it_t015m INTO wa_t015m FROM month_index TO 12.
      CONCATENATE wa_t015m-monam p_year INTO it_next12-months_12 SEPARATED BY '-'.
      APPEND it_next12.
      CLEAR it_next12.
    ENDLOOP.
    p_year = p_year + 1.
    LOOP AT it_t015m INTO wa_t015m FROM 1 TO month_index.
      CONCATENATE wa_t015m-monam p_year INTO it_next12-months_12 SEPARATED BY '-'.
      APPEND it_next12.
      CLEAR it_next12.
    ENDLOOP.
ENDIF.
LOOP AT it_next12.
    WRITE:/ it_next12-months_12.
ENDLOOP.
Thanks
Venkat

Getting the next record in a jlabel??

Hi all,
I created a form to get some data from the database and when I press the down key it show get the next record in a jlabel.
I tryed to write this code but it gets only the first record and never get the second one always the first record.
    private void getStd() {
        rSetStd = dbConn.getRset(stdQry);
        try {
            if (rSetStd.next()) {
                if (keyString.equals("Down")) {
                    lblStdId.setText(rSetStd.getString(1));
                    rSetStd.next();
        } catch (SQLException e) {
    private void txtStdName_keyPressed(KeyEvent e) {
        int i = e.getID();
        if (i == KeyEvent.KEY_TYPED) {
            char c = e.getKeyChar();
            keyString = "key character = '" + c + "'";
        } else {
            int keyCode = e.getKeyCode();
            keyString = KeyEvent.getKeyText(keyCode);
        getStd();Regards,

Use [key bindings|http://java.sun.com/docs/books/tutorial/uiswing/misc/keybinding.html] instead.
See [this post|http://forums.sun.com/thread.jspa?messageID=10932017#10932017] for forum user Kleopatra's sound decision tree between the various approaches to implement key-based interactions.

I just watched my first movie using Apple TV and Netflix. Apple TV works great except for then I try to switch back over to tv mode I get the cable channel info on the bottom of the screen but no sound or picture. What did I I do wrong?

I just watched my first movie using Apple TV and Netflix. Apple TV works great except for then I try to switch back over to tv mode I get the cable channel info on the bottom of the screen but no sound or picture. What did I I do wrong?

It was easy to set up, easy to use, got done watching the movie. Transferred from HDMI to TV and as my question above notes. I am on TV, my cable information (show/channel/etc) show OM the banner on the bottom of the screen, I can view the channell guide, but, my screen is white, no picture no sound? Other than that I got nothin

Get the next new item number of service contract va43

Hi Experts,
I have to get the next new item number of the service contract (va43)
For example: I have the service contract number like 50100929
For this existed line items like 10,20,30
in this case The next new item number is 40.
How we can get this number .
Could any one suggest me.
Thnx,
Jaya.

Hi Nitish,
Thnx for Reply,
Acually I have to create the new item to the existed service contract , for that I am using the FM 'BAPI_CUSTOMERCONTRACT_CHANGE' .
1 . Except the Item numebrt, if I pass the remaing data like (material,plant) I will create the new Item in the service contract.
2 .But for the same new Item if I pass the condition data with out the Item number it is going to short Dump ( In the short dump it showing Item number is missed )
I should do the above steps ( 1 & 2) at a time using the FM 'BAPI_CUSTOMERCONTRACT_CHANGE' other wise performancely its taking the time.
Thnx,
Jaya.

How to get the Next free Number for External Number Range

Hi ,
To get next free number for External Number Range, I have used NUMBER_GET_NEXT Function module.
It is throws the exception like NUMBER_RANGE_NOT_INTERN.
How can i get the next free number for external number range object. And How to update the Current Number for External Number Range Object
Scenario.
Call Function module              NUMBER_GET_NEXT
Import Parameter.
NR_RANGE_NR : 02
OBJECT            : RV_BELEG
QUANTITY         : 00000000000000000001
I am getting Exception : NUMBER_RANGE_NOT_INTERN
Thanks in advance.
Regards
Ram

Hi Anand,
The SAP system issues the numbers for internal number range intervals automatically. This number is between the from-number and the to-number. The last number issued is logged in the current number level.
You need to enter a number for external number issue. The number you enter needs to be between the from-number and the to-number. For external number ranges, the number number used is not logged. So the next available number is not possible in a straight forward way.
Only for Internal number ranges, the FM NUMBER_GET_NEXT can get the next available number.
Hope this helps.
Thanks,
Balaji

On verbose mode i get the next leyend, CSRUSHBBluetoothHCIcontroller: setupHardware super returned 0, invalid node structure (4,14279), my bluetooth is doomed and so my macbook or just change it?

Similar Messages

Maybe you are looking for