On Vista Firefox 6 incorrectly deals with security certificate problems

After I installed Firefox 6, I tried to go to one of my web sites. I know that there is an https security certificate problem with this site when I go to https://staging.photoquestadventures.com rather than https://www.photoquestadventures.com. On XP, FF6 opens the site. on Win7, FF6 warns about a security certificate problem then allows me to create an exception and open the site. On Vista, it says that it can't find the server at www.staging.photoquestadventures.com and I cannot get past this point - only on VISTA!

I downgraded to Firefox V4 (I didn't have a copy of V5 stored and couldn't find it on the net) and it asked the correct question: to allow connection even though there was a security certificate problem. Then I upgraded to V6, and it continued to connect just fine. So something in the V5 to V6 upgrade created the problem for me.
I wonder if there is insufficient testing of Firefox on Vista, as I have had several problems with new versions while I have not had the problems on XP or Win7.

Similar Messages

How do i deal with 'security certificate' issues on my iPad2? I'm unable to answer the security questions that pop up when Im trying to download an app because the pop up does not load properly...

Basically my Ipad2 stopped allowing me to go to sites such as Tumblr a little while ago. It wouldn't display the page properly because of 'security certificate' issues. This in itself would not have been such a problem, but when I went to the App store to try and download the Tumblr App, a pop up appeared asking me to answer some security questions before I could successfully install the App. However, the pop up would not display correctly because of 'security certificate' issues and as a result I can't download any apps from the App Store. Can anyone help with this??

Well, I maged to delete some stuff, download the update...
My Mac mail is still not ok. Still only displays today, yesterday and everything is the 16th of the month previous to this?
All a bit strange to say the least any suggestons on how to resolve this.
I now have a second issue in all my emails at the very top of each it describes in detail the full information of
          Delivered-To:
          Received:
          Received:
          Received:
          Received:
          X-Received:
          Return-Path:
          Received-Spf:
          Authentication-Results:
          Content-Type:
          Mime-Version:
          X-Mailer:
          X-Cloudmark-Analysis:
Surely this should not be displayed rather insecure I would think. Any suggestions on how to amend

How I deal with security certificate issues on sites I use all of the time?

I am being blocked from services like Drop Box and Yousendit.com because of security certicate issues. How do I resolve these?
== URL of affected sites ==
http://www.yousendit.com

Check the date and time in the clock on your computer: (double) click the clock icon on the Windows Taskbar.
See [[Secure Connection Failed]]

Websites Displaying Content with Security Certificate Errors

Can anyone explain what those yellow banners on the top of the screen that say "Internet Explorer blocks websites displaying content with security certificate errors, etc." mean and why they keep you our of certain websites and how you can get rid of them? (Sorry for the run-on sentence/question.)
Thank you!

LadyMac wrote:
Can anyone explain what those yellow banners on the top of the screen that say "Internet Explorer blocks websites displaying content with security certificate errors, etc." mean and why they keep you our of certain websites and how you can get rid of them? (Sorry for the run-on sentence/question.)
Thank you!
It means there is a problem with the sites security certificate.
There should be a "Continue to this website (not recommended)" message. I would not recommend doing that unless it is a site you know and trust.
In IE10 you can not disable that feature.
The following link will provide more information.
http://windows.microsoft.com/en-us/windows-vista/about-certificate-errors

There is a problem with this connection's security certificate The remote computer cannot be authenticated due to problems with its security certificate. Security certificate problems might indicate an attempt to fool you or intercept any data you send

Hi,
I have this Windows 2008 R2 on which I installed remoteapp some years ago.
Now the certificate expired and I get the message
"There is a problem with this connection's security certificate
The remote computer cannot be authenticated due to problems with its security certificate.
Security certificate problems might indicate an attempt to fool you or intercept any data you send to the remote computer."
How should I renew the certificate? I already went to certification store and tried to renew certificate with same key but then it says "the request contains nor certificate template information".
Please advise.
J.
J.
Jan Hoedt

Does the computer account have Enroll permission to the certificate template?
From the Server running your CA, run mmc, click File then Add/Remove Snap-in...
Add Certificate Templates and click OK.
Find the certificate template, then right click and select properties. On my CA its call ed RemoteDesktopComputers but might be called something different depending on what what template your certificate is based on.
On the security tab, click Oblect types, check Computers then OK. Enter the Computername and click OK. Then give your computer account Enroll permisssion.
HTH,
JB

Having some problems with security certificates

Hello,
In some pages, e.g. Twitter, and pages that load FB comments sections, I'm having problems with the certificates and the pages won't load. I don't get an option to add an exception either, therefore I cannot access pages.
I have pasted the error details below. Here is some important info for you:
Version: 9.0.1 <-- Upgrading is NOT an option, this is a corporate machine
Connect via proxy: yes
I doubt very much that this is an issue with the connection, as IE and Chrome are NOT having this issue on the same connection.
Error I get:
This Connection is Untrusted
You have asked Firefox to connect securely to twitter.com, but we can't confirm that your connection is secure.
Normally, when you try to connect securely, sites will present trusted identification to prove that you are going to the right place. However, this site's identity can't be verified.
What Should I Do?
If you usually connect to this site without problems, this error could mean that someone is
trying to impersonate the site, and you shouldn't continue.
Technical Details
twitter.com uses an invalid security certificate.
The certificate is not trusted because the issuer certificate is not trusted.
(Error code: sec_error_untrusted_issuer)
Can anyone shed some light? The usual troubleshooting I've come across hasn't helped me much.

Off the cuff it smells of a man-in-the-middle situation to me. As far as I know, Twitter does have a valid certificate, signed by Verisign. That IE and Chrome have no problem with it, could just mean they do not check resp. do let you know.
I'll have to pass here, because I would not know, how to turn this checking off in FX 9.0 - in any case I would think twice before doing it. The place to look would be Options > advanced > Encryption.
Hope somebody else joins us:)
PS: keeping you nailed down to Fx 9.0 version is unsafe - not just for you, but for your company as well.

How to deal with security when migrating application from weblogic 5.1 to weblogic 6.1?

Dear All,
I have one statement int weblogic 5.1 weblogic.propertis as follow,
weblogic.security.realmClass=com.tbcn.security.realm.TestRealm
but after converting to weblogic 6.1 there are no corresponding statement in
the file config.xml. And when i start the new application, error occured.
what should I do?
The error message is:
<2001/8/27 am 11:33:42> <Notice> <Management> <Loading configuration file
.\config\tbcn\config.xml
<2001/8/27 am 11:33:49> <Emergency> <Server> <Unable to initialize the
server: 'Fatal initializatio
Throwable: java.lang.NullPointerException
java.lang.NullPointerException
at
weblogic.security.SecurityService.initializeRealm(SecurityService.java:261)
at
weblogic.security.SecurityService.initialize(SecurityService.java:115)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:385)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:197)
at weblogic.Server.main(Server.java:35)
'>
The WebLogic Server did not start up properly.
Exception raised: java.lang.NullPointerException
java.lang.NullPointerException
at
weblogic.security.SecurityService.initializeRealm(SecurityService.java:261)
at
weblogic.security.SecurityService.initialize(SecurityService.java:115)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:385)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:197)
at weblogic.Server.main(Server.java:35)
Reason: Fatal initialization exception

Dear Satya,
My weblogic propertis file as follow,
# CORE PROPERTIES
# You should set these before you start the WebLogic Server the first time.
# If you need more instructions on individual properties in this
# section, check the same section in the Optional Properties, where
# we've left the long explanations. Or, better yet, go to our
# website and read all about properties, at:
# http://www.weblogic.com/docs51/admindocs/properties.html
# CORE SYSTEM PROPERTIES
# TCP/IP port number at which the WebLogic Server listens for connections
weblogic.system.listenPort=7001
# CORE SECURITY-RELATED PROPERTIES
# Read important information about security at:
# http://www.weblogic.com/docs51/admindocs/properties.html
# REQUIRED: The system password MUST be set in order to start the
# WebLogic Server. This password is case-sensitive, at least 8 characters.
# The username for the privileged user is ALWAYS "system".
# This username and password also includes httpd access (see
# HTTPD properties below).
weblogic.password.system=12345678
# RECOMMEND Set to 'everyone' if HTTPD is enabled
weblogic.allow.execute.weblogic.servlet=everyone
# Set individual ACLs to restrict access to HTTP-related resources,
# such as the Administration servlets.
# To make your own servlets generally available, follow this
# pattern (provide a weblogic.allow.execute) for your packages and
# set ACLs as appropriate.
# CORE SECURITY-RELATED PROPERTIES FOR SSL
# Read important information about SSL at:
# http://www.weblogic.com/docs51/classdocs/API_secure.html
# Enable SSL
# (default if property not defined is false)
weblogic.security.ssl.enable=true
# SSL listen port
weblogic.system.SSLListenPort=7002
# Servlets for SSL
# Authentication servlet for creating tokens for applets
weblogic.httpd.register.authenticated=weblogic.t3.srvr.ClientAuthenticationS
ervlet
# Limits number of unclaimed stored tokens
weblogic.security.certificateCacheSize=3
# Capture CA root of client servlet
weblogic.httpd.register.AdminCaptureRootCA=admin.AdminCaptureRootCA
# Certificates for SSL
# Name of acceptable CA roots
# For client authentication change value to a valid .pem file
#weblogic.security.clientRootCA=SecureServerCA.pem
# Server certificates for SSL
weblogic.security.certificate.server=democert.pem
weblogic.security.key.server=demokey.pem
weblogic.security.certificate.authority=ca.pem
# registration for certificate generator servlet
weblogic.httpd.register.Certificate=utils.certificate
weblogic.allow.execute.weblogic.servlet.Certificate=system
# CORE HTTPD ADMINISTRATIVE PROPERTIES
# True permits the HTTPD to run (default)
# Uncomment this property to disable HTTPD
#weblogic.httpd.enable=false
# If authentication is required, add username/password for each user
# who will be included in an ACL, as in this commented-out example:
#weblogic.password.peter=#8gjsL4*
# SYSTEM PROPERTIES
# System properties in this section are set to system defaults
# Performance pack. The shared library must be accessible from your
# PATH (NT) or from your shared library path (UNIX; the name of the
# variable varies: LD_LIBRARY_PATH, SHLIB_PATH, etc.)
weblogic.system.nativeIO.enable=true
# Outputs logging information to the console as well as to the log file
weblogic.system.enableConsole=true
# Sets the directory or URL for the WebLogic Admin help pages
# The help pages are shipped in the "docs/adminhelp" directory, in the
# default document root in public_html
weblogic.system.helpPageURL=/weblogic/myserver/public_html/docs51/adminhelp/
# If you prefer to access the most recent help pages, you can do so online
# by commenting out the previous property and uncommenting this one:
#weblogic.system.helpPageURL=http://www.weblogic.com/docs51/adminhelp/
# Properties for tuning the server's performance
# Number of WebLogic Server execute threads.
weblogic.system.executeThreadCount=15
# Other optional system properties
# Limits size of weblogic.log (in K) and versions old log
weblogic.system.maxLogFileSize=1024
# Adjust minimum length of password
weblogic.system.minPasswordLen=8
# UNIX only: If running on port 80 on UNIX, enable the setUID program
#weblogic.system.enableSetUID=false
# UNIX only: Unprivileged user to setUID to after starting up
# WebLogic Server on port 80
#weblogic.system.nonPrivUser=nobody
# CLUSTER-SPECIFIC PROPERTIES
# Cluster-specific properties in this section are set to system defaults.
# CLUSTER USERS: Note that ALL Cluster-specific properties should be set
# in the per-cluster properties file ONLY.
# Time-to-live (number of hops) for the cluster's multicast messages
# (default 1, range 1-255).
#weblogic.cluster.multicastTTL=1
# Sets the load-balancing algorithm to be used between
# replicated services if none is specified. If not specified,
# round-robin is used.
#weblogic.cluster.defaultLoadAlgorithm=round-robin
# SERVER-SPECIFIC CLUSTER PROPERTIES
# Cluster-related properties in this section are set to system defaults.
# CLUSTER USERS: Note that these server-specific cluster-related properties
# should be set in the per-server properties file ONLY.
# Sets the weight of the individual server for the weight-based
load-balancing.
# Range is 0 - 100.
# Larger numbers increase the amount of traffic routed to this server.
#weblogic.system.weight=100
# SYSTEM STARTUP FILES - Examples
# CLUSTER USERS: Note that ONLY startup registrations for pinned RMI
# objects should be registered in the per-server properties file.
# All other startup classes should be registered in the per-cluster
# properties file.
# For more info on writing and using startup file, see the
# Developers Guide "Writing a WebLogic Client application," at
# http://www.weblogic.com/docs51/classdocs/API_t3.html
# Register a startup class by giving it a virtual name and
# supplying its full pathname.
#weblogic.system.startupClass.[virtual_name]=[full_pathname]
# Add arguments for the startup class
#weblogic.system.startupArgs.[virtual_name]={argname]=[argvalue]
# This example shows the entry for examples/t3client/StartupQuery.java
#weblogic.system.startupClass.doquery=examples.t3client.StartupQuery
#weblogic.system.startupArgs.doquery=\
# query=select * from emp,\
# db=jdbc:weblogic:pool:demoPool
# SYSTEM SHUTDOWN FILES - Examples
# For more info on writing and using shutdown file, see the
# Developers Guide "Writing a WebLogic Client application," at
# http://www.weblogic.com/docs51/classdocs/API_t3.html
# Register a shutdown class by giving it a virtual name and
# supplying its full pathname.
#weblogic.system.shutdownClass.[virtual_name]=[full_pathname]
# Add arguments for the shutdown class
#weblogic.system.shutdownArgs.[virtualName]={argname]=[argvalue]
# This example shows the entry for examples/t3client/ShutdownTest.java
#weblogic.system.shutdownClass.ShutdownTest=examples.t3client.ShutdownTest
#weblogic.system.shutdownArgs.ShutdownTest=\
# outfile=c:/temp/shutdown.log
# SECURITY-RELATED PROPERTIES FOR WORKSPACES
# For backward compatibility, the following entries disable Access
# Control on Workspaces
weblogic.allow.read.weblogic.workspace=everyone
weblogic.allow.write.weblogic.workspace=everyone
# JOLT FOR WEBLOGIC PROPERTIES
# These properties configure a BEA Jolt connection pool for use with
# the simpapp and bankapp examples, and register a servlet for use with
# with the simpapp example. The default server address provided here
# points to a public TUXEDO server that is hosted by BEA for use with
# this example.
# Servlet registration for simpapp example:
#weblogic.httpd.register.simpapp=examples.jolt.servlet.simpapp.SimpAppServle
t
# Pool creation and cleanup
# note this example is set up to work with the public
# demo TUXEDO server available from BEA's website:
#weblogic.system.startupClass.demojoltpoolStart=\
# bea.jolt.pool.servlet.weblogic.PoolManagerStartUp
#weblogic.system.startupArgs.demojoltpoolStart=\
# poolname=demojoltpool,\
# appaddrlist=//beademo1.beasys.com:8000,\
# failoverlist=//beademo1.beasys.com:8000,\
# minpoolsize=1,\
# maxpoolsize=3
#weblogic.system.shutdownClass.demojoltpoolStop=\
# bea.jolt.pool.servlet.weblogic.PoolManagerShutDown
#weblogic.system.shutdownArgs.demojoltpoolStop=\
# poolname=demojoltpool
# WEBLOGIC ENTERPRISE CONNECTIVITY PROPERTIES
# The registrations enable a BEA IIOP connection pool and
# register servlets for use with the simpapp and university examples.
# Configure for your environment and uncomment to use.
# Uncommenting these properties requires WebLogic Enterprise Connectivity
# and an operating WebLogic Enterprise Server.
# Servlet registration for simpapp servlet example
#weblogic.httpd.register.SimpappServlet=\
# examples.wlec.servlets.simpapp.SimpappServlet
#weblogic.allow.execute.weblogic.servlet.SimpappServlet=everyone
# Servlet registration for simpapp EJB example
# (You'll need to add the wlec_ejb_simpapp.jar to the
# weblogic.ejb.deploy property in this file.)
#weblogic.httpd.register.ejbSimpappServlet=\
# examples.wlec.ejb.simpapp.ejbSimpappServlet
#weblogic.allow.execute.weblogic.servlet.ejbSimpappServlet=everyone
# Pool creation and cleanup for the simpapp example
#weblogic.CORBA.connectionPool.simplepool=\
# appaddrlist=//wlehost:2468,\
# failoverlist=//wlehost:2468,\
# minpoolsize=2,\
# maxpoolsize=3,\
# username=wleuser,\
# userrole=developer,\
# domainname=simpapp
# Servlet registration for university Servlet example:
#weblogic.httpd.register.UniversityServlet=\
# examples.wlec.servlets.university.UniversityServlet
#weblogic.allow.execute.weblogic.servlet.UniversityServlet=everyone
# Pool creation and cleanup for the University example:
#weblogic.CORBA.connectionPool.Univpool=\
# appaddrlist=//wlehost:2498,\
# failoverlist=//wlehost:2498,\
# minpoolsize=2,\
# maxpoolsize=3,\
# username=wleuser,\
# userrole=developer,\
# apppassword=wlepassword,\
# domainname=university
# WEBLOGIC FILE PROPERTIES
# Maps a volume name to a path, for client file read/write
#weblogic.io.fileSystem.[volumeName]=[fullPathName]
# WEBLOGIC JMS DEMO PROPERTIES
# CLUSTER USERS: Note that ALL JMS deployment should be done in the
# per-cluster properties file ONLY.
# You set up a JDBC connection pool if you want persistent messages
# (including durable subscriptions). To use JMS and EJBs in the same
# transaction, both must use the same JDBC connection pool. Uncomment
# the following property to use the default JDBC connection pool
# 'demo', which is defined in the Demo connection pool section of this file.
#weblogic.jms.connectionPool=demoPool
# The JMS Webshare example demonstrates how the ClientID for a
# durable subscriber is configured in the connection factory:
#weblogic.jms.topic.webshareTopic=jms.topic.webshareTopic
#weblogic.jms.connectionFactoryName.webshare=jms.connection.webshareFactory
#weblogic.jms.connectionFactoryArgs.webshare=ClientID=webshareUser
#weblogic.httpd.register.webshare=examples.jms.webshare.WebshareServlet
# The JMS trader example shows how to use JMS with an EJB. In addition
# to uncommenting the following properties, you must also set up and
# deploy the EJB example examples.ejb.basic.statelessSession.Trader in
# ejb_basic_statelessSession.jar to try out this JMS example:
#weblogic.jms.topic.exampleTopic=javax.jms.exampleTopic
#weblogic.jms.connectionFactoryName.trader=jms.connection.traderFactory
#weblogic.jms.connectionFactoryArgs.trader=ClientID=traderReceive
#weblogic.httpd.register.jmstrader=examples.jms.trader.TraderServlet
# Registers the underlying servlet
#weblogic.httpd.register.jmssender=examples.jms.sender.SenderServlet
# These properties are used with the ServerReceive JMS example,
# which demonstrates how to establish a JMS message consumer
# in a startup class:
#weblogic.system.startupClass.serverReceive=\
# examples.jms.startup.ServerReceive
#weblogic.system.startupArgs.serverReceive=\
# connectionFactory=javax.jms.TopicConnectionFactory,\
# topic=javax.jms.exampleTopic
# These properties are used with the PoolReceive JMS example,
# which demonstrates how to establish a pool of JMS message consumers
# in a startup class:
#weblogic.system.startupClass.poolReceive=\
# examples.jms.startup.PoolReceive
#weblogic.system.startupArgs.poolReceive=\
# connectionFactory=javax.jms.TopicConnectionFactory,\
# topic=javax.jms.exampleTopic
#weblogic.allow.create.weblogic.jms.ServerSessionPool=everyone
# WEBLOGIC RMI DEMO PROPERTIES
# CLUSTER USERS: Note that pinned RMI objects should be registered
# in the per-server properties file ONLY. All other RMI startup
# classes should be registered in the per-cluster properties file.
# Remote classes registered at startup after the pattern:
#weblogic.system.startupClass.[virtualName]=[fullPackageName]
# These examples can be compiled to see RMI in action. Uncomment to use:
#weblogic.system.startupClass.hello=examples.rmi.hello.HelloImpl
#weblogic.system.startupClass.multihello=examples.rmi.multihello.HelloImpl
#weblogic.system.startupClass.stock=examples.rmi.stock.StockServer
# WEBLOGIC EJB DEMO PROPERTIES
# CLUSTER USERS: Note that ALL EJB deployment should be done in the
# per-cluster properties file ONLY.
# See WebLogic Demo Connection Pool below for a connection pool
# to use with these examples.
# Deploys EJBeans. Uncomment the appropriate lines below and
# modify DBMS-related info and paths to match your particular installation:
# TBCN EJB PROPERTIES
weblogic.ejb.deploy=\
C:/weblogic/myserver/AccountSB.jar, \
C:/weblogic/myserver/AddressEntryDet.jar, \
C:/weblogic/myserver/AddressEntry.jar, \
C:/weblogic/myserver/Affiliate.jar, \
C:/weblogic/myserver/ContactPerson.jar, \
C:/weblogic/myserver/ContactSB.jar, \
C:/weblogic/myserver/Factory.jar, \
C:/weblogic/myserver/FactorySups.jar, \
c:/weblogic/myserver/LoginUsers.jar, \
c:/weblogic/myserver/Member.jar, \
c:/weblogic/myserver/MemberQuotaUsage.jar,\
c:/weblogic/myserver/MemberToCategory.jar,\
c:/weblogic/myserver/Organization.jar, \
c:/weblogic/myserver/Person.jar, \
c:/weblogic/myserver/QuotaType.jar,\
c:/weblogic/myserver/Registration.jar, \
c:/weblogic/myserver/TempAccounts.jar, \
c:/weblogic/myserver/TempDomain.jar, \
c:/weblogic/myserver/UserAccount.jar, \
c:/weblogic/myserver/UserRole.jar, \
c:/weblogic/myserver/BuyerProducts.jar, \
c:/weblogic/myserver/Catalog.jar, \
c:/weblogic/myserver/Categories.jar, \
c:/weblogic/myserver/CategoryToCategory.jar, \
c:/weblogic/myserver/CountryToCategory.jar, \
c:/weblogic/myserver/InvitedMember.jar, \
c:/weblogic/myserver/ProductOrigin.jar, \
c:/weblogic/myserver/ProductOtherFee.jar,\
c:/weblogic/myserver/ProductSups.jar, \
c:/weblogic/myserver/Products.jar,\
c:/weblogic/myserver/ProductToCategory.jar, \
c:/weblogic/myserver/SecondaryQcEntry.jar, \
c:/weblogic/myserver/CodeClass.jar,\
c:/weblogic/myserver/ConfirmationSB.jar, \
c:/weblogic/myserver/PurchasedPackage.jar,\
c:/weblogic/myserver/RejectReasonCode.jar, \
c:/weblogic/myserver/ServiceOrder.jar,\
c:/weblogic/myserver/ServiceOrderLog.jar,\
c:/weblogic/myserver/ServiceOrderState.jar,\
c:/weblogic/myserver/ServiceOrderType.jar,\
c:/weblogic/myserver/ServicePackageDetails.jar, \
c:/weblogic/myserver/ServicePackage.jar, \
c:/weblogic/myserver/ServicePayment.jar, \
c:/weblogic/myserver/ServiceReqSB.jar, \
c:/weblogic/myserver/TAM.jar, \
c:/weblogic/myserver/SubscriptionEB.jar, \
c:/weblogic/myserver/PostingCategoryEB.jar, \
c:/weblogic/myserver/PostingBrowsedEB.jar, \
c:/weblogic/myserver/PostingInfoEB.jar, \
c:/weblogic/myserver/TransactionLogEB.jar, \
c:/weblogic/myserver/PostingSB.jar
#weblogic.ejb.deploy=\
# d:/weblogic/myserver/ejb_basic_beanManaged.jar, \
# d:/weblogic/myserver/ejb_basic_containerManaged.jar, \
# d:/weblogic/myserver/ejb_basic_statefulSession.jar, \
# d:/weblogic/myserver/ejb_basic_statelessSession.jar, \
# d:/weblogic/myserver/ejb_extensions_finderEnumeration.jar, \
# d:/weblogic/myserver/ejb_extensions_readMostly.jar, \
# d:/weblogic/myserver/ejb_subclass.jar, \
# d:/weblogic/myserver/jolt_ejb_bankapp.jar
# Servlet used by the EJB basic beanManaged example
# Uncomment to use:
weblogic.httpd.register.beanManaged=\
examples.ejb.basic.beanManaged.Servlet
# Add a list of users (set the password with
weblogic.password.[username]=XXX)
# to set an ACL for this servlet:
#weblogic.allow.execute.weblogic.servlet.beanManaged=user1,user2,etc
#weblogic.password.user1=user1Password
#weblogic.password.user2=user2Password
# WEBLOGIC XML DEMO PROPERTIES
# These properties are required to run the XML examples.
# Uncomment to use.
# CLUSTER USERS: Note that ALL servlets should be set up
# in the per-cluster properties file ONLY.
#weblogic.httpd.register.StockServlet=examples.xml.http.StockServlet
# BizTalk example properties
#weblogic.jms.queue.tradeIncoming=biztalk.jms.tradeIncoming
#weblogic.jms.queue.tradeError=biztalk.jms.tradeError
#weblogic.httpd.register.BizTalkServer=examples.xml.biztalk.BizHttpProtocolA
dapter
#weblogic.httpd.initArgs.BizTalkServer=bizQueue=biztalk.jms.tradeIncoming
# WEBLOGIC ZAC DEMO PROPERTIES
# These registrations enable the ZAC Publish Wizard.
weblogic.zac.enable=true
# Set the publish root for a WebLogic Server. Edit and
# uncomment to use.
#weblogic.zac.publishRoot=d:/weblogic/zac
# Set an ACL for each package you publish. The [name] is
# the "Package name" you assign in the ZAC Publish Wizard.
# Publish a package, edit this property, and uncomment to use.
#weblogic.allow.read.weblogic.zac.[name]=[user list]
#weblogic.allow.write.weblogic.zac.[name]=system
# HTTPD ADMINISTRATIVE PROPERTIES
# Enables logging of HTTPD info in common log format and
# sets the log file name (default is "access.log" in "myserver")
weblogic.httpd.enableLogFile=true
weblogic.httpd.logFileName=access.log
# Tracks HTTPD requests with events delivered to WEBLOGIC.LOG.HTTPD
weblogic.httpd.enableEvents=false
# Enables HTTP sessions
weblogic.httpd.session.enable=true
# Sets an optional cookie name. The default name is "WebLogicSession".
# Prior to version 4.0, the default was "TengahSession". To make
# this backward compatible with cookies generated from previous
# installations, you should set this property to "TengahSession".
# Uncomment this line and set this to any string of your choice,
# or comment out this property to use the default.
#weblogic.httpd.session.cookie.name=WebLogicSession
# MIME types
weblogic.httpd.mimeType.text/html=html,htm
weblogic.httpd.mimeType.image/gif=gif
weblogic.httpd.mimeType.image/jpeg=jpeg,jpg
weblogic.httpd.mimeType.application/pdf=pdf
weblogic.httpd.mimeType.application/zip=zip
weblogic.httpd.mimeType.application/x-java-vm=class
weblogic.httpd.mimeType.application/x-java-archive=jar
weblogic.httpd.mimeType.application/x-java-serialized-object=ser
weblogic.httpd.mimeType.application/octet-stream=exe
weblogic.httpd.mimeType.text/vnd.wap.wml=wml
weblogic.httpd.mimeType.text/vnd.wap.wmlscript=wmls
weblogic.httpd.mimeType.application/vnd.wap.wmlc=wmlc
weblogic.httpd.mimeType.application/vnd.wap.wmlscriptc=wmlsc
weblogic.httpd.mimeType.image/vnd.wap.wbmp=wbmp
# In seconds, the keep-alive for HTTP and HTTPS requests
weblogic.httpd.http.keepAliveSecs=60
weblogic.httpd.https.keepAliveSecs=120
# WEBLOGIC JDBC DRIVER PROPERTIES
# Enables JDBC driver logging and sets the file name for the log
# The weblogic.jdbc.logFile is placed in the per-server
# directory (default is "myserver")
weblogic.jdbc.enableLogFile=false
weblogic.jdbc.logFileName=jdbc.log
# WEBLOGIC JDBC CONNECTION POOL MANAGEMENT
# CLUSTER USERS: Note that ALL JDBC connection pools should be set up
# in the per-cluster properties file ONLY.
# For creating JDBC connection pools. This example shows a connection
# pool called "oraclePool" that allows 3 T3Users "guest," "joe," and "jill"
# to use 4 JDBC connections (with a potential for up to 10 connections,
# incremented by two at a time, with a delay of 1 second between each
# attempt to connect to the database), to an Oracle database server called
# "DEMO." If more than 4 connections are opened, after 15 minutes, unused
# connections are dropped from the pool until only 4 connections remain
open.
# Every 10 minutes, any unused connections in the pool are tested and
# refreshed if they are not viable.
#weblogic.jdbc.connectionPool.oraclePool=\
# url=jdbc:weblogic:oracle,\
# driver=weblogic.jdbc.oci.Driver,\
# loginDelaySecs=1,\
# initialCapacity=4,\
# maxCapacity=10,\
# capacityIncrement=2,\
# allowShrinking=true,\
# shrinkPeriodMins=15,\
# refreshMinutes=10,\
# testTable=dual,\
# props=user=SCOTT;password=tiger;server=DEMO
# Get more details on each argument for this property in the
# Administrators Guide on setting properties at:
# http://www.weblogic.com/docs51/admindocs/properties.html
# Set up ACLs for this connection pool with the following:
weblogic.allow.reserve.weblogic.jdbc.connectionPool.oraclePool=everyone
# guest,joe,jill
#weblogic.allow.reset.weblogic.jdbc.connectionPool.oraclePool=\
# joe,jill
#weblogic.allow.shrink.weblogic.jdbc.connectionPool.oraclePool=\
# joe,jill
# This property is an ACL that specifies the users who can
# create dynamic connection pools:
#weblogic.jdbc.connectionPoolcreate.admin=joe,jill
# Read more about setting up and using connection pools in the
# developers guide for WebLogic JDBC at:
# http://www.weblogic.com/docs51/classdocs/API_jdbct3.html#T5a
# TBCN JDBC CONNECTION POOL MANAGEMENT
weblogic.jdbc.connectionPool.oraclePool=\
url=jdbc:oracle:thin:@202.109.102.151:1521:tbcn,\
driver=oracle.jdbc.driver.OracleDriver,\
loginDelaySecs=1,\
initialCapacity=2,\
maxCapacity=10,\
capacityIncrement=2,\
allowShrinking=true,\
shrinkPeriodMins=15,\
refreshMinutes=10,\
testTable=dual,\
props=user=tbcn;password=ca91768
weblogic.allow.reserve.weblogic.jdbc.connectionPool.oraclePool=everyone
weblogic.jdbc.TXDataSource.oracleDataSource=oraclePool
weblogic.jdbc.DataSource.oracleReadOnlyDataSource=oraclePool
# WEBLOGIC DEMO CONNECTION POOL PROPERTIES
# CLUSTER USERS: Note that ALL JDBC connection pools should be set up
# in the per-cluster properties file ONLY.
# This connection pool uses the sample Cloudscape database shipped
# with WebLogic. Used by the EJBean, JHTML, JSP and JMS examples.
# Uncomment to use:
#weblogic.jdbc.connectionPool.demoPool=\
# url=jdbc:cloudscape:demo,\
# driver=COM.cloudscape.core.JDBCDriver,\
# initialCapacity=1,\
# maxCapacity=2,\
# capacityIncrement=1,\
# props=user=none;password=none;server=none
# Add a TXDataSource for the connection pool:
#weblogic.jdbc.TXDataSource.weblogic.jdbc.jts.demoPool=demoPool
# Add an ACL for the connection pool:
#weblogic.allow.reserve.weblogic.jdbc.connectionPool.demoPool=everyone
# WEBLOGIC HTTP SERVLET PROPERTIES
# CLUSTER USERS: Note that ALL servlets should be set up
# in the per-cluster properties file ONLY.
# WebLogic offers different types of servlets for various uses.
# Classpath servlet registration
# The ClasspathServlet is used to serve classes from
# the system CLASSPATH. It is used by applets to load
# classes they depend upon, and is registered against
# the virtual name 'classes' here by default. This means
# you should set your applet codebase to "/classes".
# You can register multiple virtual names for this servlet.
# Note that it can also be used to serve other
# resources/files from the system CLASSPATH.
# Don't confuse the ClasspathServlet with the ServletServlet. The
# ClasspathServlet is used for serving classes for client-side Java only.
# The ServletServlet is used to invoke unregistered servlets.
# See the Administrators Guide "Setting up WebLogic as an HTTP server"
# http://www.weblogic.com/docs51/admindocs/http.html#classfile for more
info.
weblogic.httpd.register.classes=weblogic.servlet.ClasspathServlet
# We also set an open ACL for everyone to call the ClasspathServlet
# so that applets work without requiring further changes.
weblogic.allow.execute.weblogic.servlet.classes=everyone
# File servlet registration
# FileServlet searches below the documentRoot for the requested file
# and serves it if found. If the requested file is a directory,
# FileServlet will append the defaultFilename to the requested path
# and serve that file if found.
weblogic.httpd.register.file=weblogic.servlet.FileServlet
weblogic.httpd.initArgs.file=defaultFilename=index.html
weblogic.httpd.indexFiles=zh_TW/index.htm
# ServerSideInclude servlet registration
# SSIServlet searches below the documentRoot for the
# requested .shtml file and serves it if found.
weblogic.httpd.register.*.shtml=weblogic.servlet.ServerSideIncludeServlet
# Example URL: http://localhost:7001/portside/welcome.shtml
# for the file /weblogic/myserver/public_html/portside/welcome.shtml
# PageCompileServlet (used by JHTML)
# See the information below under WebLogic JHTML
# JSPServlet (used by JSP)
# See the information below under WebLogic JSP
# ServletServlet registration
# Allows unregistered servlets in the servlet classpath (see Servlet
# reload properties below) to be r

Having problems with security certificates-can't access sites

I just installed Firefox & am not having problems which result in security certificate error messages. I cannot access Facebook; Pandora, etc.

Which SSL error message do you get?
Check the date and time in the clock on your computer: (double) click the clock icon on the Windows Taskbar.
*https://support.mozilla.com/kb/Secure+Connection+Failed

Firefox won't allow security certificate, even adding new will add a expired one. Clock is correct.

So i was trying to get into a admin panel for my mumble server.
www.mmo-mumble.com
But for some reason firefox decided this website is unsecured.
So i checked my security certificate and it was showing it expired yesterday.
I can get into that one, but when i removed it.
It did not even ask me to add a new one after visiting the site again.
I cannot even ignore the warning and continue to the site.
Adding the certificate manually worked, but it added one which was already expired.

I have experienced this problem exactly as the OP has described. I have to open task manager to temporarily restore Firefox functionality.
Also, my sister bought a new HP PC about a month ago. I intalled Firefox on it, and she also sees this problem.
I've been forced to go back to IE (which does not have this problem) until Firefox can sort this out, which hopefully will be soon.

HT4061 When I try to sync my Iphone to my computer , when I click on Icloud I get a message that acess is blocked from displaying content with security certificate errors.

When I bring up Explorer and click on Icloud i get a message that access is blocked from displaying content with security errors

The new iTunes has a somewhat different look from the previous version. You can get the old look back if you prefer it by doing View > Show Sidebar in iTunes. Or you can adapt to the new look.

Best way to deal with Storm 9530 problems?

Hi there,
i'm having numerous problems with my Storm from freezeups to random reboots to an inability to connect via USB (Windows reports a problem with the connection). Before I replace the phone I thought I would restore the phone to factory defaults to see if that solves any problems.
Is that the best way to deal with these problems? Can someone please point out the best way to backup my data (given that I can't connect via USB anymore) and restore the phone?
Thanks in advance.
[L]

Anyone?
[L]

Gmail Security Certificate problem

I have Mail setup to access three Gmail via IMAP (I was using POP until a week ago). Whe ntrying to check messages (sinc, I guess), I get the following problem message (for the three accounts) in regards to a "security certificate" being POP when I trying to use IMAP. Not sure what is going here... I checked my Gmail settings 3 times and all is set for IMAP from that end. Obviously I haven't been able to access messages from Mail since then. Suggestions?

Not certain, but this can fix myriad Mail problems...
Safe Boot from the HD, (holding Shift key down at bootup), it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move this folder & file to the Desktop.
Move this Folder to the Desktop...
/Users/YourUserName/Library/Caches/Mail/
Move this file to the Desktop...
/Users/YourUserName/Library/Mail/Envelope Index
Reboot.
If that doesn't do it and you can afford to redo all your Rules, try these & reboot...
/Users/YourUserName/Library/Mail/MessageRules.plist
/Users/YourUserName/Library/Mail/MessageRules.plist.backup
Note, in 10.5 & up /Users/YourUserName/Library/Caches/Mail/ may or may not exist.

I have Mac OS 10.4.11: A number of times you aks me to uppgrade, but always my version is too old för your uppgrade version. This time, you never warned, so I thought that this version of Firefox can deal with my old Mac OS version.

So I downloaded the newest version and replaced the older one. And consequently I cant open Firefox in this version. Please tell me what version I shall download! And give me a site to find it on!

You are unfortunately out of luck with an Intel Mac and OS X 10.4.11<br />
Best would be to update to OS X 10.5 or later if you want to use Firefox 4 and later versions (current is 8.0).<br />
There is a Firefox 8 compatible third-party version TenFourFox from www.floodgap.com for a PowerPC Mac, but no alternative for an Intel Mac with Mac OS X 10.4.
Firefox 4 and later require at least OS X 10.5 and an Intel Mac.
* http://www.mozilla.com/firefox/8.0/system-requirements/
Firefox 3.6.x (Mac OS X 10.4 and later) can be found here:
* http://www.mozilla.com/en-US/firefox/all-older.html

How do I resize pinned tabs/deal with tab group problems in Firefox 22?

With the automatic update to Firefox 22, my pinned tabs have ballooned in size; not only does this look horrible, but it reduces the real estate available for other tabs. While NoSquint has sorted the issue with websites randomly resizing themselves, everything else (add-on menu, toolbar icons) has also increased in size, which affects what can be displayed.
Another problem with 22 is that my tab groups are no longer behaving normally: I click on one group and another group moves around the screen, typically jumping behind the original group I clicked on. Any suggestions for how to improve these problems are much appreciated.

hello, firefox 22 is now respecting the pixel density you've set on a system level in the windows control panel > appearance > display. more information about that is availbale at http://windows.microsoft.com/en-us/windows7/make-the-text-on-your-screen-larger-or-smaller
if you want to set the text size/pixel density in firefox different from that of your system's settings like it was handled in prior versions, enter '''about:config''' into the firefox address bar (confirm the info message in case it shows up) & search for the preference named '''layout.css.devPixelsPerPx'''. double-click it and change its value to '''1.0''' (or any other zoom factor that fits your purpose; 0.8 equals 80%, 1.15 is 115% and so on..., -1.0 is the default value and will adhere to the system settings).

Setting up a Time Capsule and dealing with security

Here's an interesting problem/question.
I had very little trouble setting up my TC on my MPB wirelessly. However, my old PB G4 800Mhz with the original airport card couldn't connect. It would keep timing out. Finally, I called Tech Support and think it managed to stump even the tech support. There was a point the TC wouldn't even work with the MBP. Finally, I unplugged the TC, did a hardware reset then a software reset. In factory default mode, with no security, this PB can connect. However, if I turn on any form of security (WEP,WPA, anything), the PB can't connect.
Has anyone come across an issue like this? And how did you solve it? Is this clear enough?

2) What's the difference between joining a network and extending it? Wouldn't joining a network extend its range?
When joining an existing wireless network, an AirPort Express Base Station (AX) is acting just like any other wireless client (laptop, desktop, printer, etc.); its basic router functions are disabled. When extending an existing wireless network it will "extend" the network connectivity (including Internet access if available) from the base station. The latter is called a Wireless Distribution System (WDS). With the introduction of the 802.11n base stations another method of extending a wireless network was also introduced. This new method retains a 802.11n wireless network by only working with another 802.11n AirPort, whereas a WDS will only operate in 802.11g.
4) Is there any difference between WEP (Transitional Security Network) on the Time Capsule and WEP 128 bit on the Airport Express?
Sort of. WEP Transitional is a "hybrid" version of WEP that's supported on 802.11n networks that will have 802.11b/g WEP clients. WEP 128-bit is only available in either the 802.11b/g-compatible, 802.11g only or 802.11b only radio modes.

On Vista Firefox 6 incorrectly deals with security certificate problems

Similar Messages

Maybe you are looking for