On which router B bit is added in Label?

Ashwin,
I hope you are referring "Bottom of stack" bit?. If yes, please see below,
When LER (Label Edge Router) receives the IP packet and if the egress is LSP based, it pushes one or more labels. The number of label to be pushed depends on the service and the transport path. For example, when the SP is providing L2/L3 VPN service, the LER will push 2 labels. The bottom label to identify the service and the top label to identify the remote edge router. If there is TE tunnel established along the path and if the TE is not end-to-end, you may see 3 labels pushed.
When LER pushes the labels, it set the S bit as 1 in the bottom label. This is required so the ASIC can understand if the ethertype is to be set to 0800 (IP packet) or 8847 (MPLS packet).
-Nagendra

Similar Messages

Which route to go for OCP

Hi,
I have completed BCA+MCA from IGNOU. I am 30+, working in a mixed technology for above 2.5 yrs, which includes ( MYSQL, MS-SQL, VB.NET, little bit ASP.NET, S/W SUPPORT). So, for better career opportunity, I thought of doing OCP course. But, found that there are 2 routes for the same.
1) OCP - Developer route
2) OCP - DBA route
Now, which route should I prefer.

854447 wrote:
Hi,
I have completed BCA+MCA from IGNOU. I am 30+, working in a mixed technology for above 2.5 yrs, which includes ( MYSQL, MS-SQL, VB.NET, little bit ASP.NET, S/W SUPPORT). So, for better career opportunity, I thought of doing OCP course. But, found that there are 2 routes for the same.
1) OCP - Developer route
2) OCP - DBA route
Now, which route should I prefer.There are many different OCP certifications, and often clever bigdelboy can work out the desires of the poster by context.
Buy in your case there are 4 possibilities .....
(1) MySQL DBA OCP
(2) MySQL DEV OCP
(3) (classic Oracle RDBMS) DEV OCP (forms &/or Pl/SQL)
(4) (classic Oracle RDBMS) DBA OCP
Now as far as i can tell (2) matches the area the area you work in best and my opinion (and this is a personal opinion only) is one should normally (and there are exceptions) get certified in the area you are currently working in first - I believe this looks credible! IMHO The alterative is to use the certification to train yourself into an area that expands your current area of knowledge.
Checkout htp://certification.oracle.com and feel free to come back to me.

Which routing protocols are supported on ASA 5585

Hi,
I am curious to know which routing protocol is well supported on Cisco ASA 5585. do someone on the forum has implemented routing on ASA?
I have ASA 5585 on context mode, as of now 4 contexts have been created. upstream device is Nexus.
I have ASA with Software Version 8.4(4)1 and Device Manager Version 6.4(9).
if someone can point me to good implemented example of routing protocol to their environment (like OSPF, BGP) that would be great.
Thanks

You're welcome.
Multiple contexts adds another twist - in ASA 8.4 dynamic routing protocols are not supported at all for multiple contexts. Reference.
ASA 9.0 added support for dynamic routing protocols in multiple context modes, including OSPF v2 (but not v3 for IPv6). Reference.
FYI ASA 9.1(2) is current as of this writing and is the recommended release in the 9.x train. (Mentioned near the end of the latest TAC Security podcast - episode #37 here.)

Will MS Office Standard 2011 for MAC 32-bit work on my MacBook Pro which is 64-bit?

Will MS Office Standard 2011 for MAC 32-bit work on my MacBook Pro which is 64-bit?

MacOffice 2011 will run on your computer. 32 bit software runs on a 64 bit computer.

I got a new lenovo desktop windows 8.1,installed itunes and synced my ihone 4 no problems. then i imported a cd of songs which showed up in recently added but not in main library ,therefore it did not sync to the iphone. how can i get new songs to ap

i got a new lenovo desktop windows 8.1,installed itunes and synced my iphone 4 no problems. then i imported a cd of songs which showed up in recently added but not in main library ,therefore it did not sync to the iphone. how can i get new songs to appear in the main library and sync properly
thanks
john

Check the songs are really not in the Music section of the library by clicking the magnifying glass in the search box and unticking Search Entire Library if it is ticked, then typing in the name of the album. If the tracks still don't show try closing iTunes and deleting a hidden file called sentinel from inside your iTunes folder. This should make iTunes run an integrity check on the database when you start it again. Make sure the tracks are checked before you try syncing again.
tt2

I downloaded the 64 bit version of itunes and plugged in my ipod touch but a sign pops up and says i need the right software for the ipod to connect which is 64 bit. Does anyone know how to fix this problem?

I downloaded the 64 bit version of itunes and plugged in my ipod touch but a sign pops up and says i need the right software for the ipod to connect which is 64 bit. Does anyone know how to fix this problem?

Hi alexanderfrommilton,
First try reinstalling itunes.

Windows 7 decide which route to take if THE PC Has 4 connection (4 X 1 Gig) available to internet

Hi Network experts
realy i need you to figure out the below
1)how windows 7 decide which route to take if THE PC Has 4 connection (add on 4 X 1 Gig) available to internet , the route print on windows machine shows the 4
connection with same metric (metric 10) , the adapter order is as follows
G1,G2,G3.G4
2)what about the less subnet id if each interface has less subnet id than other
3)the built in interface (gig 0) why have metric of 286 not 10 like others
thank you all

Hello.
As far as I remember, Windows uses ANY of the routes with equal metric.
I'm not sure if there is publicly available algorithm, but I believe it may switch from one interface to another if experience packet loss on the current.
So, the conclusion is: the outgoing interface is not predictable.
If you want any kind of reliability you would better to create port-channel and use FHRP on your routers.

Which function is used for adding days to given month

which function is used for adding days to given month

Hi Jagrut,
Good ... Check out the following examples
Get a date
DATE_GET_WEEK Returns week for a date
WEEK_GET_FIRST_DAY Returns first day for a week
RP_LAST_DAY_OF_MONTHS Returns last day of month
FIRST_DAY_IN_PERIOD_GET Get first day of a period
LAST_DAY_IN_PERIOD_GET Get last day of a period
RP_LAST_DAY_OF_MONTHS Determine last day of month
Date calculations
DATE_COMPUTE_DAY Returns a number indicating what day of the week the date falls on. Monday is returned as a 1, Tuesday as 2, etc.
DATE_IN_FUTURE Calculate a date N days in the future.
RP_CALC_DATE_IN_INTERVAL Add days/months to a date
RP_CALC_DATE_IN_INTERVAL Add/subtract years/months/days from a date
SD_DATETIME_DIFFERENCE Give the difference in Days and Time for 2 dates
MONTH_PLUS_DETERMINE Add or subtract months from a date. To subtract a month, enter a negative value for the 'months' parameter.
DATE_CREATE Calculates a date from the input parameters:
Example: DATE_CREATE
CALL FUNCTION 'DATE_CREATE'
EXPORTING
 anzahl_jahre = 1
 anzahl_monate = 2
 anzahl_tage = 3
 datum_ein = '20010101'
IMPORTING
 datum_aus = l_new_date.
 Result:
 l_new_date = 20020304
Example: MONTH_PLUS_DETERMINE
data: new_date type d.
CALL FUNCTION 'MONTH_PLUS_DETERMINE'
EXPORTING
months = -5 " Negative to subtract from old date, positive to add
olddate = sy-datum
IMPORTING
NEWDATE = new_date.
write: / new_date.
Hollidays
HOLIDAY_GET Provides a table of all the holidays based upon a Factory Calendar &/ Holiday Calendar.
HOLIDAY_CHECK_AND_GET_INFO Useful for determining whether or not a date is a holiday. Give the function a date, and a holiday calendar, and you can determine if the
date is a holiday by checking the parameter HOLIDAY_FOUND.
Example: HOLIDAY_CHECK_AND_GET_INFO
data: ld_date like scal-datum default sy-datum,
 lc_holiday_cal_id like scal-hcalid default 'CA',
 ltab_holiday_attributes like thol occurs 0 with header line,
 lc_holiday_found like scal-indicator.
CALL FUNCTION 'HOLIDAY_CHECK_AND_GET_INFO'
EXPORTING
 date = ld_date
 holiday_calendar_id = lc_holiday_cal_id
 WITH_HOLIDAY_ATTRIBUTES = 'X'
IMPORTING
 HOLIDAY_FOUND = lc_holiday_found
tables
 holiday_attributes = ltab_holiday_attributes
EXCEPTIONS
 CALENDAR_BUFFER_NOT_LOADABLE = 1
 DATE_AFTER_RANGE = 2
 DATE_BEFORE_RANGE = 3
 DATE_INVALID = 4
 HOLIDAY_CALENDAR_ID_MISSING = 5
 HOLIDAY_CALENDAR_NOT_FOUND = 6
 OTHERS = 7.
if sy-subrc = 0 and
 lc_holiday_found = 'X'.
write: / ld_date, 'is a holiday'.
else.
write: / ld_date, 'is not a holiday, or there was an error calling the function'.
endif.
Checking dates
DATE_CHECK_PLAUSIBILITY Check to see if a date is in a valid format for SAP. Works well when validating dates being passed in from other systems.
Converting dates
DATE_CONV_EXT_TO_INT Conversion of dates to SAP internal format e.g. '28.03.2000' -> 20000328 Can also be used to check if a date is valid ( sy-subrc <> 0 )
Function to return literal for month
he table you want to use is T247. You can also use the function MONTH_NAMES_GET.
You can also try table T015M. It has the month number in it's key.
Formatting
DATUMSAUFBEREITUNG Format date as the user settings
Other
MONTH_NAMES_GET It returns all the month and names in repective language.
Good Luck and thanks
AK

Which router do you use for AppleTV?

So I got to thinking the other day that maybe there are just certain routers that no matter what will not work with AppleTV.
The only one that I have gotten to work EVERY time and consistently is the Airport Extreme Base Station.
My gf had a belkin (I don't remember the model #) that no matter what, I could not get it to remain consistent i.e. had to restart almost every day, randomly showed port 3689 error, etc
I tried the normal stuff, enabling uPNP, port forwarding, etc..nothing helped.
With the AEBS (which I already had and made her get) everything was fine and dandy.
So my questions to you are:
1) If not the AEBS, which router do you use?
2) If not the AEBS, which settings did you have to set?
3) If not the AEBS, what is the model / firmware version of your router?
I noticed many people have problems that are the same things on this board over and over. And I've also noticed that it's usually the router and/or the settings that are causing the issues/inconsistencies.
This should be an interesting thread and should help steer people in the right direction.

capaho wrote:
Airport Extreme doesnt have enuf port forwards for most online games & so I avoided that one.
There is no limit (short of maxing out system capacity). It may not have the presets you want, but you can configure port forwarding manually.
indeed, i can confirm this.
i have many ports forwarded on my AEBS and it is very easy to configure to do so.

Can I upgrade to Lion with an Intel iMac with 1 GB RAM. I am getting conflicting info (from Apple advisors) whether I need 2GB -which I can do by adding 1, or 3 -which apparently I can't do. Anybody successful in upgrading to Lion with 1 or 2 GB Ram?

I am getting conflicting info (from Apple folks) whether I can upgrade to Lion with 1 GB Ram. Some are saying I need 2 (which I can do by adding memory) - or 3 (which I'm not sure I can do). Anyone running Lion with 1 GB? 2? I am at Leopard 10.5.8 to run some recording mixer which the company (Alesis) told me they weren't going to support drivers to Lion, but I guess they changed their minds. Am I clear on this? thanks.

The hardware requirements for Lion are an intel Core 2 Duo processor and 2GB RAM.
I wouldn't even both trying with 1GB, and even with 2GB Lion may struggle. If you intend to upgrade to Lion, can I suggest you max out your RAM. RAM is cheap at the moment.
Which model mac mini do you have?

Which router will I get?

I am scheduled for a Sept. 6th install in Marblehead MA (North of Boston). Does anyone know which router I am likely to get for my freebie? I want 802.11N with gigabit wired ports. Any chance of that, or should I just buy my own and convert theirs to a planter?
Solved!
Go to Solution.

Thanks, that was very thorough. We are only getting internet service so that simplifies things.
One last thing, will the ActionTec make a good planter?
Just kidding, I will keep it around because the Verizon techs get horribly confused when you use equipment they didn't give you. I could tell you stories about getting DSL service with my netgear DSL modem (not for the modem, it worked great, but with it in the loop the V techies were greatly confused) that would make your head spin around.

Any way I can find out which router I will receive?

I just signed up for FIOS and I don't recall seeing anywhere in the process which router I would be receiving. I found a page on Verizon's site that said depending on when I got the router, it would either be a D-link, the actiontec (or a verizon-branded version of 1), or the 9100em, but it doesn't give a clue as to which one to expect if I just placed an order.
Any idea how I can find out?

My understanding is Vz is using the the Westell router for West customers and Actiontec for east customers.

100 Mbps bandwidth between 2 location over Ethernet which router model is suitable?

Hi,
We want use 100 Mbps bandwidth between 2 location over Ethernet which router model is suitable?
Sanjay Nalawade.

Hello Sanjay,
I'm afraid the question is too generic to be addressed in a forum post, since the answer may depend on several variables.
My suggestion is to contact your Cisco Account Manager and ask for the assistance of a System Engineer who can make a project for your needs.
Regards,
Antonio

Cisco which router are support 10g sfp module

HI
I would like to know in cisco 3900,2900 etc which router are supports 10g sfp modules.
Thanks
Veeramani.G

I would like to know in cisco 3900,2900 etc which router are supports 10g sfp modules.
No it won't. Both routers won't even push 1 Gbps.

I have an Intel Core I7 iMac with an SSD. Does TRIM run on SSDs on iMacs? I was recently told it did not run on OSX, which is a bit alarming.

I have an Intel Core I7 iMac with an SSD. Does TRIM run on SSDs on iMacs? I was recently told it did not run under OSX, which is a bit alarming.

TRIM is supported on Apple-branded SSDs, but not third-party aftermarked SSDs.
Go to "About this Mac" > More Info > System Report > Serial-ATA > Trim Support

On which router B bit is added in Label?

Similar Messages

Maybe you are looking for