On Windows 8, some widgets, such as the menu button near the upper right, stop working after some time, and functionality is restored by rebooting the PC.
I use the latest releases of Firefox as they become available on a Windows 8 PC. Firefox works properly, usually for a few hours, before annoying problems manifest. The problem I'm addressing here is some widgets, including some Firefox widgets and isolated widgets (such as buttons and pull-down selectors) in some websites stop working. In Firefox, the Menu button (the three stacked dashes icon) stops working. And the Download arrow sometimes stops working also. Sometimes, sub-items such as Print stop working. For some pull-downs, the up and down arrow keys might still work even though I might now be able to select with the mouse. Closing and reopening Firefox usually restores some functionality. However, I usually have to reboot the PC to restore all functions which stopped working. Then I am good for usually a few hours again. Another annoyance, which others have addressed, is the eventual appearance of Chinese-looking characters on the tab labels bar across the top. Restarting Firefox gets rid of these for the time being. Thanks for investigating.
hello, maybe that's an issue with hardware acceleration - please try [[Upgrade your graphics drivers to use hardware acceleration and WebGL|updating your graphics driver]], or in case this doesn't solve the issue or there is no new version available at the moment, disable hardware acceleration in the firefox ''menu ≡ > options > advanced > general'' (that setting will take a restart of the browser to take effect).
the oriental characters are a displaying flaw caused by the mcafee site advisor extension - please try to disable or remove that in case you have it present until there is an update by mcafee that can fix the problem.
http://service.mcafee.com/faqdocument.aspx?id=TS100162
https://community.mcafee.com/thread/76071
Similar Messages
-
GPRS services suddenly stop working after some time abt 4 hrs.Airplane on off solves it
I am using a factory unlocked iPhone 4 GSM in India. Iam currently using it on airtel network 2G services i.e GPRS services. Now the problem I have noticed is that the GPRS services suddenly stop working after some time say about 4 hours. Then what i do is to turn airplane mode on and then off or restart the phone and GPRS starts working. Agan after some time I have to repeat this exercise. Please help soon. This is happening since the time i bought this phone i.e from past 20 days. I have tried allpossible network settings and resetting network but nothing helped. everything else is working perfect.
Hi Syed,
I have also started facing the exact same problem since the past few months with my docomo service.
Earlier, EDGE / GPRS used to work just fine from my workplace where the network was good.
But recently, I got my iphone replaced, due to a network problem, from an apple store in indianapolis, and also upgraded to ios 5.....so not sure now whether this intermittent EDGE / GPRS outage is due to the new hardware or the new OS.
Did you upgrade to iOS 5 and did it help?
PS: iOS 5.0.1 also doesn't seem to be helping, I still need to restart the phone to get EDGE / GPRSt to work.....will try out the airplane mode thing....at least that shouldn't take as much time as a full reboot.
Regards,
Hemant -
The top button on my phone recently stopped working. Well sometimes. Majority of the time if I click it hard enough on the left side of the button it will lock the screen... Otherwise it doesnt work at all anymore. Also the camera appears to be placing a blue pixel on pictures I take. Its annoying. What should I do?
It's completely situational. Without being able to directly compare the "scratch" on the original poster's iPhone with your iPhone, what gaamcc had happen could not be extrapolated to guess what Apple may do in your situation. It will depend entirely on what the Apple technician diagnoses after examining your iPhone. He/she may decide that any damage is strictly cosmetic and didn't have any connection with the problem you're taking your iPhone in for, or he/she may diagnose the problem as stemming from user damage. You'll just have to see when you go to the Apple Store.
Regards. -
Multitouch Gestures Stop working after some time in Mountain Lion
I have a problem with Multitouch Gestures on Macbook Pro, using Mountain Lion. After some time 3 thinger swipe to left/right stops working. The only thing that helps to solve this problem is making a restart. Are there any other ways to get rid of this problem?
Me too. My iMac and MBP same here. Having graphics glitches when playing games neither in Mac or Bootcamp with Windows. Sometimes screen even slashed into half and freezed. Wake up from sleep also have graphics issues, like I need to use the crusor to oaint out the grey login screen, if not, it will stay white. Slowly moving the crusor will paint back the grey background.
-
I think it's a Lion problem. I had this problem with an old Dell True Mobile wireless router, and hoped it would go away with a new Airport Express router. Same problem. I checked online and saw a lot of message boards featuring questions from people that suffered the interruption of their wi-fi connection, some with Macbooks others with iMacs like me. The problem happens when I don't use the computer for a few minutes. It goes into the Idle mode, kind of like sleep. The connection is severed and the time clock upper right stops. It's weird. There was supposedly an Apple update that addressed this issue, so at the Genius bar two days ago I updated to 10.7.3, downloaded and installed the update. Didn't work. Is it Lion? Is it a wireless card issue? Very frustrating. I subitted a genius bar work authorization with another Apple Genius Bar support tech the next day. He ran some tests. Cryptically said he knew that Apple knew about this and was working on a solution but couldn't tell me what it was. Submitted my info and said I'd be contacted by an Apple tech within 48 hours and provided with a link to another download of another update that should "fix" the problem. I don't know what to do.
I FINALLY SOLVED THIS ISSUE!!!!
New routers have "mixed" modes for your network; this means that it will automatically choose the best option between wireless-B, wireless-G and wireless-N network modes. I used to experience this issue using the 2.4 GHz. mixed mode wireless network.
Thankfully, my router can create 2 networks: a 2.4 GHz. network and a 5 GHz. network.
When I randomly changed this value to "use only wireless-B and wireless-G" trying to fix an issue with a wi-fi expander, the iMac wi-fi issue dissapeared! I tried it with wireless-N only, but it didn't work.
So, finally, I have a 2.4 GHz network with only wireless-B and wireless-G modes which works PERFECT with the iMac, and a 5 GHz. network with a mixed* wireless mode for everything else mode.
*PD: by "mixed" mode it means that the router will automatically choose between B, G and N network modes as it fits better. -
Hi my name is Amit, after upgrading to OS X Maverick I often have problem of my Hot corners stop working after a short period of time. I have to go to mission control and have to reset them for them to start working again. However this is temparory and they stop working again and this is quite annoying. Can someone suggest a cure to this problem please. I will be grateful. Thanks Amit.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Preferences/com.apple.dock.plist
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Desktop, leaving the window open. Log out or restart the computer and test. If there's no change, put the item you moved back where it was, overwriting the one that may have been created in its place. Log out again. Otherwise, delete the item you moved.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return. -
Web Proxy sessions stop working after some time (ISA 2006)
Hi guys,
we have been using ISA 2006 with Web Publishing Rule to provide access for mobile phone to corporate Exchange via ActiveSync for years. The issue occurred roughly one month ago.
After some period of time (usually it happens once or twice daily) ISA stops to accept connections from the mobile phones. There are no errors on client devices (they don't get new mails). In Sessions tab I see that only SecureNAT sessions from phones remain,
but no Web Proxy sessions any more. There are no errors in Event Viewer and I didn't find anything strange in diagnostic logs.
I've created one more Web Publishing Rule with the same Web listener as for ActiveSync rule for OWA. The intersting thing that ISA still allows access to OWA when issue occurs. Looks like the problem with Web Proxy filter.
After OS restart ISA starts working normally.
I have ISA 2006, sp1, version 5.0.5723.514 installed on VMWare VM with Windows 2003 SE sp2.
Do you have any ideas?Hi,
Does this issue still exist? If so, you could try to collect logs from devices to find more information.
http://support.microsoft.com/kb/2461792
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Expose keys stop working after some time
Hi,
I am experience some failure of my Exposé keys after a certain amount of time without rebooting the system. (~2 hours+). Usually you can show the Desktop by pressing F11, show all application windows with F10 and so on. After the system booted everything works like I would expect it, but then the keys doesn't react anymore.
F11 seems to send the command to the foreground application, instead to the OS which causes fullscreen presentation for the firefox browser.
I can fix the issue temporarily by restarting the dock, however after a hour the problem reappears. That is very annoying and frustrating.
What can I do?Have you looked at the server.log to see if you have any other clues to the point of failure?
-
I have a Safari web browser that I have used since I purchased my Mac in 2008. Within the last week or so, I have been getting an error message, which says something like it cannot find the Apache back server or something like that. As a result, I have not been able to enter the web via Safari. I have Mac OSX, version 10.6.8. In the past, I needed an update to my operating system software to view on-line videos. Is there a similar problem with the operating software this time? Or has Safari gone off the air. I am utilizing Firefox to enter the web currently and I can continue to use it, but I would like to have a back-up web browser. Can someone help?
Jim Glenn<<That may be so, but email is an inclusive part of the broadband package.
If the broadband service activated on a given date, then the included email facility should be working too. Anything else would be an altogether unacceptable situation for me...unless the broadband had been activated in advance of any agreed date.>>
I totally agree with this. Never before have I signed up for a service where email has taken longer to be activated than the broadband connection, in fact, it's been the total opposite, all my past providers activated my email account before the broadband was activated and I was able to start using the address immediately so that by the time bb was enabled, I was ll and truly up and running.
I do not want a hotmail account or any other type of email account, I want to use what I am paying for, btinternet.
So far, am not a happy customer and am beginning to wonder if I should have gone with another provider.
Sorry for the rant but I expect more from such a big company.
Alison.
From Alison, sent from my iPad 2 -
The volume keys on my MacBook Pro stop working after using headphones.
The volume keys on my MacBook Pro recently stopped controling the volume after I've used headphones. I still have sound; I just can't make the volume increase or decrease. The mute, however, still works just fine. Because I have sound from the intenral speakers I know the computer doesn't think the headphones are still in the jack. A reboot fixes the problem, but as soon as I use headphones the problem starts up again. I want to fix this permanently.
I don't know if this helps but all the other keys (brightness, play/pause, etc) still work. I recently had to reset the PRAM because my computer refused to sleep when the lid was shut. I've checked system preferences and everything seems to be in order.
Can someone please help!?I found this advice on another thread after encountering the same problem - I did the reboot and it worked fine and dandy!
I spoke with Applecare to fix my Macbook volume. Apparently there are pins inside the speaker/headphone jack that can get jammed. We fixed mine by doing some sort of reboot:
Turn off laptop.
Hold down the Option, Command, P, and R keys (all four at once, it's tricky!) and while holding down the four keys, turn on the computer. When you hear the second chime, release the four keys.
This re-set the sound toggle to internal speakers. Now I'm afraid to insert headphones again, but I assume this reboot will work over and over. -
Kaspersky stopped working after 10.9.2 update. Anybody else having the same problem?
After updating to 10.9.2 I noticed that the Kaspersky icon had gone grey. When I opened the application it said " Some components cannot be enabled". I tried un-installing Kaspersky and re-installing but then I got an " Installation failed" message. Kaspersky version is 8.06.863.c.d.g.
You do not need this Antivirus software if you are just running OS X.
Completely uninstall Kaspersky per the instructions on the developer's website.
Also, read this link about Macs and Mac malware and viruses and antivirus software.
https://discussions.apple.com/docs/DOC-1982
If you feel compelled to run antivirus on OS X, the ones that have less performance impact on the system are
VirusBarrier Express (found in the Mac App Store).
ClamXAV -
Replication DS6.2 - DS5.2 stops working after some time
Hello!
After weeks of unsuccessfully trying to solve a replication problem, I hope that someone of this forum can give me a hint.
I have 2 masters DS5.2 and two masters DS6.2.
Replication is working fine for some days. E.g. last time the replication was working until 29.11.
But at some point the replication stops working and I get the following errors in the errors log:
[28/Nov/2007:10:51:16 +0100] - WARNING<10288> - Repl. Transport - conn=-1 op=-1 msgId=-1 - Replay of an already seen operation csn 474d3d84000002bd0000, s
equence number 1, ignoring it
[28/Nov/2007:12:48:09 +0100] - WARNING<10288> - Repl. Transport - conn=-1 op=-1 msgId=-1 - Replay of an already seen operation csn 474d58e9000002bd0000, s
equence number 1, ignoring it
[28/Nov/2007:19:06:55 +0100] - INFO: 29398 entries in the directory database.
[28/Nov/2007:19:06:55 +0100] - INFO: add:107, modify:0, modrdn:0, search:3651, delete:0, compare:0, bind:2763 since startup.
[29/Nov/2007:13:18:38 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - csnplCommit: can't find csn 474eb18e00001a360000
[29/Nov/2007:13:18:38 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - ruv_update_ruv: cannot commit csn 474eb18e00001a360000
[29/Nov/2007:13:18:38 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - replica_update_ruv: unable to update RUV for replica dc=hvb,d
c=de, csn = 474eb18e00001a360000
[29/Nov/2007:13:18:38 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [dsmmucqsu05.sys.hypo
vereinsbank.de:636]
[29/Nov/2007:13:18:38 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [dsmmucqsu05.sys.hypo
vereinsbank.de:636]
[29/Nov/2007:13:34:05 +0100] - WARNING<20805> - Backend Database - conn=328186 op=1 msgId=2 - search is not indexed base='ou=people,dc=hvb,dc=de' filter='(
objectClass=*)' scope='sub'
[29/Nov/2007:13:58:10 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [dsmmucqsu05.sys.hypo
vereinsbank.de:636]
[29/Nov/2007:13:58:10 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [dsmmucqsu05.sys.hypo
vereinsbank.de:636]
[29/Nov/2007:15:45:46 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [dsmmucqsu05.sys.hypo
vereinsbank.de:636]
[29/Nov/2007:15:46:03 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - csnplCommit: can't find csn 474ed41b00001a9a0000
[29/Nov/2007:15:46:03 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - ruv_update_ruv: cannot commit csn 474ed41b00001a9a0000
[29/Nov/2007:15:46:03 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - replica_update_ruv: unable to update RUV for replica dc=hvb,d
c=de, csn = 474ed41b00001a9a0000
[29/Nov/2007:15:46:03 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [dsmmucqsu05.sys.hypo
vereinsbank.de:636]
Since the replication was not working I had to initialize the DS6 masters again:
[29/Nov/2007:16:03:59 +0100] - import hvb: Index buffering enabled with bucket size 76
[29/Nov/2007:16:03:59 +0100] - import hvb: Beginning import job...
[29/Nov/2007:16:04:20 +0100] - import hvb: Processed 14166 entries -- average rate 674.3/sec, recent rate 674.2/sec, hit ratio 0%
[29/Nov/2007:16:04:41 +0100] - import hvb: Processed 22598 entries -- average rate 525.5/sec, recent rate 525.5/sec, hit ratio 100%
[29/Nov/2007:16:05:03 +0100] - import hvb: Processed 31591 entries -- average rate 493.6/sec, recent rate 405.4/sec, hit ratio 100%
[29/Nov/2007:16:05:05 +0100] - import hvb: Workers finished; cleaning up...
[29/Nov/2007:16:05:17 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - Replica (dc=hvb,dc=de) has been initialized by total protocol
as full replica
[29/Nov/2007:16:06:56 +0100] - WARNING<20805> - Backend Database - conn=334334 op=1 msgId=2 - search is not indexed base='ou=people,dc=hvb,dc=de' filter='(
objectClass=*)' scope='sub'
[29/Nov/2007:16:07:42 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - csnplCommit: can't find csn 474ed92e00001a360000
[29/Nov/2007:16:07:42 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - ruv_update_ruv: cannot commit csn 474ed92e00001a360000
[29/Nov/2007:16:07:42 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - replica_update_ruv: unable to update RUV for replica dc=hvb,d
c=de, csn = 474ed92e00001a360000
I tried to change a password. But the replication failed again and since than the replication is working again.
[29/Nov/2007:16:07:42 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [dsmmucqsu05.sys.hypo
vereinsbank.de:636]
[29/Nov/2007:16:07:42 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [dsmmucqsu05.sys.hypo
vereinsbank.de:636]
But I'm sure that after some days there will be a problem again.
Sometime there are also the errors:
[29/Nov/2007:16:27:05 +0100] - ERROR<8264> - Replication - conn=-1 op=-1 msgId=-1 - Internal error Failed to position cursor in db at C
SN 474ed8d5000002590000, DB error 5 - I/O error
[29/Nov/2007:16:27:05 +0100] - WARNING<10258> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Changelog error A database error is encou
ntered while servicing replication agreement "dsmmucqsu08.sys.hypovereinsbank.de:10636/dc=hvb,dc=de"
[29/Nov/2007:16:27:05 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [d
smmucqsu08.sys.hypovereinsbank.de:10636]
[29/Nov/2007:16:27:05 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [d
smmucqsu08.sys.hypovereinsbank.de:10636]
[29/Nov/2007:16:27:06 +0100] - ERROR<8264> - Replication - conn=-1 op=-1 msgId=-1 - Internal error Failed to position cursor in db at C
SN 474ed8d5000002590000, DB error 5 - I/O error
[29/Nov/2007:16:27:06 +0100] - WARNING<10258> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Changelog error A database error is encou
ntered while servicing replication agreement "dsmmucqsu08.sys.hypovereinsbank.de:10636/dc=hvb,dc=de"
[29/Nov/2007:16:27:06 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [d
smmucqsu08.sys.hypovereinsbank.de:10636]
I tried to reproduce the problem.
At the moment everything works fine and I can do many changes.
But I know that there is somewhere a problem and the replication will stop working again in the next days.
Can you give any advise?
Regards,
Beate
Edited by: 72716 on Nov 30, 2007 10:05 AMHere is an explanation of the failure:
1. Prioritized replication was introduced with DS6.0;
2. When a suffix at a DS6 instance is initialized from a DS5 instance, and then an operation is performed at the DS6 instance that uses prioritized replication, replication fails;
3. By default, password policy uses prioritized replication to propagate auth-failure-lockout state updates (e.g., adding a pwdFailureTime attribute value on a failed bind attempt);
A work-around:
Disable DS6 supplying auth-failure lockout state using prioritized replication. In any password policy having auth-failure-lockout enabled, set
pwdIsLockoutPrioritized:FALSE
Note that DS6 enables prioritized lockout by default, in particular, it enables this feature when migrating a password policy received from a DS5 instance. Hence, for this workaround to be effective, the prioritized lockout feature must be disabled in any DS6 password policy that has auth-failure lockout enabled, which could include:
1. The default password policy at any DS6 instance (cn=password policy,cn=config);
2. Any password policy originating at a DS5 instance, including those in data imported into a DS6 instance, received via replication total update initialization, or added at the DS5 instance subsequent to the DS6 instance initialization;
3. Any password policy added to a DS6 instance.
Additionally, do not set any prioritized replication rules for other attributes.
It is possible the bug can still be triggered in the case of a DS6-only topology that was initialized from DS5 data.
Contact Sun support for the status of a fix for the bug. The CR is 6645742. -
Why does ServerSocket stop working after some time?
Hi to all.
I have a following problem:
I wrote a multithread application that uses sockets ( TCP ), and use it to transfer some objects between computers in VPN.
It all works just fine, except that sometimes my server socket ( implemented as a separate Thread ) just stops working, and other computers cannot connect to it...?
I didn't specify setSOTimeout(), and did all Exception catch-ing in the thread.
Today, I had some >50000 connections in about 5 hours, and than it just stopped! My server socket stopped accepting any connections...
I restarted my application, and everything worked again properly...
Does anybody know why is this happening?
Please, any suggestion is appreciated....
Thank you.Hi, thank you all for answering me.
@baftos:
I didn't specify any backlog parameter value. 50 connections at a time seems more than enough for this application... ( Are you sure that 50 is the default value )
I never have more than about 40 connections simultaneously opened, and yes - each one is a separate thread.
@dannyyates:
You're rights, I should have provided some code.
Here it is:
public class Server implements Runnable
ServerSocket serversocket = null;
Socket clientSocket = null;
continueWorking boolean = true;
public void run()
startServer();
public void startServer()
try
serversocket = new ServerSocket(3344);
catch (IOException e)
System.out.println(e.getMessage());
while ( continueWorking==true )
try
clientSocket = serversocket.accept();
Worker Worker = new Worker(clientSocket);
new Thread(Worker).start();
catch (IOException e)
System.out.println(e.getMessage());
System.out.println("The server is shutting down...");
class Worker implements Runnable
ObjectInputStream obj;
Socket clientSocket;
public Worker(Socket clientSocket)
this.clientSocket = clientSocket;
try
obj = new ObjectInputStream(clientSocket.getInputStream());
catch (IOException e)
System.out.println(e.getMessage());
public void run()
Object object;
try {
try
object=(Object)obj.readObject();
// do something with object....
catch (ClassNotFoundException e)
System.out.println(e.getMessage());
catch (Exception e)
obj.close();
clientSocket.close();
catch (IOException e)
catch (Exception e)
}What I don't like here is the constructor of the Worker. Could this block the server?
Edited by: Darko on Apr 7, 2009 11:24 PM -
The scroll button on my mouse suddenly stoped working after the recent upgrade in firefox
about 6 weeks ago, the scroll button on my mouse quit working when using firefox. It works fine with explorer
about 6 weeks ago, the scroll button on my mouse quit working when using firefox. It works fine with explorer
-
I have itunes on my computer and haven't used it for a while and went to click on shortcut and got message that it has stopped working so tried to update, followed all promptsd and it said it had been installed but when i clicked on shortcut again came up with same message. I have tried to uninstall and re install still get same message. Don't know why or what to do? Also tried to set up my dads Ipod Nano on his computer and it wont accept the Australian area code? ????Help Please going insane
Does iTunes not see the phone?
If not, make sure you're running the current version of iTunes.
If you are running the current version and it still doesn't recognize it, see this: http://support.apple.com/kb/TS1591?viewlocale=en_US&locale=en_US
As for iPhoto, you will have to purchase a newer version. It's not a free upgrade. Or, you can use Image Capture, which is built into OS X, to import the photos.
Maybe you are looking for
-
Open Purchase order - urgent please
Hi Friends, How to find an open purchase order, in which table i need to check that. Please let me know. Thanks in advance. Regards, Roberts.K
-
I Went to the store to upgrade phones and get a new plan. They didn't have any of the three phones I was gettin, Tried to sell me a plan for 8 gigabyte, even though we don't even use 1 now. Left mad, manager watched and did nothing. Tried to call, I
-
If my imported video files are 720 by 480 will my movie have to be small sized?
I'm editing DV video files that, when I look at the specs on the file, says that the dimensions are 720 x 480. Common sense tells me that I shouldn't necessarily have to end up with a DVD that only covers about 1/3rd of my final viewing screen, but p
-
Can't get rid of ads in Safari. Please advise something.
I have macbook late 2011 model and using Yosemite OS. I have installed 2 to 3 ad blocker extensions but still no matter what website i click or what page i click, it opens up new links and some of them says about virus and some don't. But the thing i
-
Problem Web Dynpro Java applications using JasperReports
Hello all, We have followed the footsteps of these blogs but we can not make it work. Part I --> Part-I: Print Web Dynpro Java applications using JasperReports Part II --> Part-II: Print Web Dynpro Java applications using JasperReports Part III --> P