Onboard Sound Cuts out after a while - anyone know why?

Hiya peeps,
  Ever since I bought my MSI motherboard, the onboard sound has been a bit dodgy.  Whenever I play games like UT2004 or halflife, the sound cuts out after several minutes of play.  It only comes back again if I restart the game, but then after a few minutes it will cut out again.  Anyone else experienced this?
I have tried altering all the game settings from safe mode sound drivers to full EAX H/W accelerated but this has made no difference to the stability of the audio.  I have been updating all the drivers to my system as and when MSI live update picks them up, os I am up to date on that front.  I have a lot of decent kit (PSU etc) in my machine and its not overclocked in any way at all.  Also I have the most up to date direct x too.
My system spec is below,  please help chaps.  
PS im trying here as MSI have not responded to any of my email queries about this problem.
Regards,
  MrG.
CPU: P4 2.8E Prescott 800FSB (200MHz * 14.0) HT Enabled
MEM: 1GB Corsair XMS3200C2PT Platinum CAS2
MTB: MSI 865PE Neo2-PFISR (MS-6728) Bios V3.7
GFX: GexCube Radeon 9800 Pro
HDD: Hitachi Deskstar 7K250 120GB ATA-100 8MB
PSU: Enermax EG465AX-VE(G)(FMA) 460W
OS : WinXP SP1, all drivers up-to-date and Liveupdate up-to-date
Nothing is overclocked and all BIOS setitngs are set to the defaults.

I had the same problem, this is how i fixed it:
Uninstall everything relating to the drivers for your sound from both the control panel AND the device manager, do not let windows PnP install ANY drivers. Then manually install the latest drivers, not from live update, but from MSI's website, then run the installer package. Make sure you reboot at every step, since that's what I did, and no more sound cut-out.
See, we have many of the same specs in our computers, this is probably the same issue I had.

Similar Messages

  • My ipod video sound cuts out after 30 sec

    I play my movie and the sound cuts out after a while and then it only plays the video with no sound. It's not the video because it works fine on my computer and all the other videos are doing the same thing. I found if I rewind or fast foreward the sound comes back but only for a little while and the sound cuts out again.

    This happens with the current firmware 1.1 upgrade on the iPod. You can downgrade the firmware to 1.0 and this will solve that problem. Doing it this way you won't have to restore the iPod which will erase it. If you can't do this then you can restore the iPod using the previous updater.
    How To: Downgrade iPod Firmware
    http://forums.ipodhacks.com/showthread.php?threadid=813
    The other option is to use QT Pro which will work to correct the problem:
    http://forums.ilounge.com/showthread.php?s=&threadid=146142
    1) Open up the Video file in Quicktime Pro
    2) Select File->Export
    3) Select "Movie to MPEG-4" beside "Export:", then click the OPtions button
    4) Select "Video" & make sure the "Video Format" is set to "Pass through"
    5) Do the same for "Audio", then hit OK
    6) Save the file

  • Sound cuts out after any given amount of time, only way to turn back on is to reboot.

    For reference, I am using a fully up-to-date mid-2012 model rMBP. Attached to my MacBook via USB I also have an M-Audio KeyStation 49i, which is where I have my headphones plugged in (probably not related in any way, but just noting this).
    I first encountered this issue while using Chrome and listening to music on SoundCloud with Garageband open after the last Mavericks update yesterday. I initially thought it was a Chrome bug, and in doing some research, I found that other Chrome users were having the same issue as me, but it was related to PepperFlash (a version of the standard Flash player), and disabling it in Chrome Canary fixed the issue for them.
    Unfortunately, it did not fix the issue for me, but I have refrained from using Chrome since then and stuck to Safari to ensure that it's not two issues with the same outcome.
    Then I stumbled across all of the Mavericks users that are having sound problems; anything from crackling/popping to not working at all. It seemed, though, that everyone that was having the sound cut out for them entirely were not only having this happen after their laptops came back from sleep mode (which is not the case for me), but were able to fix it by restarting Coreaudio[d] or -- if they had been using the headphone jack on their Macs -- they just had to plug it in again and take it back out. Neither of these worked or were applicable to my situation. Some were able to get it working again by resetting the PRAM/NVRAM, and a few others seemed to be able to bypass the issue by using Soundflower, but neither of these solutions worked for me either. The only way I can get sound to work again is to restart my computer entirely.
    After doing so, I am only able to listen to audio for a certain amount of time. It seems to vary depending on how much memory the task is taking up. Like I'll be able to listen to a track or two on SoundCloud, or attempt to record into Garageband for five minutes or so. If I'm in a Garageband project that already has a lot of tracks, I'll be lucky if I can even get through a few seconds before it cuts out entirely. There are very quiet crackling/pop sounds every once and awhile, but it is hard for me to distinguish if that is just the natural state of the hardware I am using or if it is related to background system sounds.
    I'm at wit's end trying to figure out what the problem is, mostly because there are so many others with similar issues and varying hardware/software setups that it's hard to track down exactly what my own situation is.
    I'd like to know where I should be exporting any error logs from so that someone can take a look at this issue.
    Thank you.

    After doing some additional testing, I was able to get the sound working again without rebooting by:
    1. Unplugging the MIDI device.
    2. Resetting the audio input and output to "built-in".
    3. Plugging back in the MIDI device.
    4. Changing the audio input and output back to the MIDI device.
    Still, though, the sound only lasts for a little while, and there doesn't seem to be anything indicating how or why it stops.

  • Sound cutting out after 2.1 update

    Hi!
    I installed the newest firmware upgrage, 2.1, the one with the "genius" playlist.
    After this install however, i've had problems with songs cutting out after a few seconds. The song continues to play, but with no sound. Also, this often occurs if i turn the screen off, within a few seconds of selecting a new song to play.
    Has anyone else encountered this problem?

    Has nothing to do with that. Like the previous remark says, it's totally random. One song doesn't work so if you select another song it may play, or not, or just for a few moments. Go back to the song you originally chose and it may play, or not. Same with videos. I just bought a new dock and thought there was something wrong with that but, nope, it's the iPod. It chokes me that something that costs so much is so easily broken. I've only had it for 6 weeks and who knows how long it will take them to fix this issue.
    If you are having the same problem, PLEASE report it so that we can get this fixed asap!
    Thanks!!

  • Sound cuts out after 1 sec on .avi files in QuickTime

    First, let me preface this post by saying that I have spent about a week searching through different posts in these and other forums regarding similar issues, and have yet to find a solution that works for me.
    So I have been trying to play certain .avi files with QuickTime that I BELIEVE have been encoded with the XviD codec. At first, no sound played at all. After installing a bunch of different codec files, including packages such as Perian and codecs such as DivX, XviD, and AC3. I finally managed to get QuickTime to play these videos with sound for about a second, after which the sound cuts out. Also, if I rewind or skip to another point in the video, the sound will restart again for about one second and then cut out once more.
    I should mention that these videos work perfectly when I play them with the DivX player. Does anyone have any suggestions or anyone with similar issues? I am currently running OS X 10.7 (Lion) on a new MacBook Pro 15"

    After installing a bunch of different codec files, including packages such as Perian and codecs such as DivX, XviD, and AC3. I finally managed to get QuickTime to play these videos with sound for about a second, after which the sound cuts out. Also, if I rewind or skip to another point in the video, the sound will restart again for about one second and then cut out once more...Does anyone have any suggestions or anyone with similar issues?
    As stated on the Perian "Support" web page, "Please consider removing obsolete QuickTime Components: FFusion, Xvid Delegate, 3ivX, DivX, DivX Decoder, XviD, msmpeg4v1, msmpeg4v2, AviImporter, EX_M4S2, Casio AVI Importer, AC3 Codec, and MatroskaQT." Having multiple codecs for the same compression formats can create component conflicts. Since Perian component package supports all of the named codecs, it is not necessary to have both Perian and the named codecs simultaneously installed.
    In addition, Lion seems to also be prone to conflicts with third-party software apps and hardware peripheral casrds/devices. If possible, it is usually best to disconnect/close anything you can during the tests. Also, it might be a good idea to test the same files on alternative systems. (I.e., if possible, you might like to post a sample problem file to see if others can play them without problem on other platforms operating under Lion OS as a further conflict test.)

  • Video problem - sound cuts out after 29 minutes.

    I have put some TV shows from my computer onto my iPod but after 29 minutes, the sound cuts out and I am left with just the video. If I skip past 29 minutes, the screen goes black for a second, then returns to the previous menu.
    My iPod is a 30GB 5G with iPod Software version 1.2.
    I used iTunes 7 and tried 7.0.1 to copy the videos to my iPod. They play fine on the computer.
    I have put films (1hr+) on before and they have worked fine, however that was with iPod software 1.1 and an older version of iTunes.
    Any ideas?

    Well sounds like the TV shows had transferred errors. Have you tried reloading them?
    Also make sure the Frame rate, and Audio rate are working ok. You will know if they are not, if voice and video are off even slightly. Also how long are the TV shows? 30 Min? If they are, then it may just be a corruption or skipped of the last min or few seconds, because the video is ending. That would explain the black screen. It does that after the video finished and it goes back to the last screen. So it just may have not copied the last few sec of the video, that happens sometimes. Try reloading it again!
    Also if that does not work, try resetting the Ipod. I would hate for you to “Restore” your Ipod for just 30-60 sec of lost sound of a TV show. Especially if everything else if working well.
    Best of luck. Don’t forget, if this post helped you, click Solved or Helped at the top of the post. It makes our rank better!
    Have a great day, and hope you fix your problem.
    P.s. it could just be that your Tv shows End at 29 min-ish as well IDK?
    God life

  • So I know now that upgrading to 5.0 took away the page icon at top of iPad. But strangely enough it still shows up on iPhone 4 after upgrading. Anyone know why

    So I know now that upgrading to 5.0 took away the page icon at top of iPad. But strangely enough it still shows up on iPhone 4 after upgrading. Anyone know why

    So how can I get it back to where there is a seperate visual thumbnail page of tabs. This new tabs on the top is a big mistake in my opinion. Many times while on a website I have accidentally hit one of the other tabs at the top of the screen and all the sudden I am on a page that was previously open. This new tabs at the top also made the menu bar deeper to accomodate everything that should be on a seperate page like it used to be. It was really great, and not something that had to be improved upon. So is there a way to get the tabs back to where they should be?

  • HT4906 Wanted to choose Photo Stream in iCloud but it is greyed out and not available - anyone know why?

    Hi there - wanted to choose photo stream in iCloud but it is greyed out - anyone know why?

    Wrong version of software?
    You really need to give more information  since we only know waht you tell us
    see http://www.apple.com/support/icloud/ for more informaiton
    LN

  • Trying to listen to songs and it cuts out after 12 to 15 seconds why?

    I've always been able  to listen to songs for a 1/12 mins. All of a sudden it gets to 12 to 15 seconds and cuts out. Anyone having similar problem in Istore?

    Try update your iTunes to the latest version 10.6.3 just released yesterday and see if it rectifies the issue.

  • I have a iPhone 4S and when watching videos on the internet sound cuts out as the video is playing. The rest of the video plays with no sound. Sometimes when I pause It and play again sound comes back but not all the time. can anyone help?

    I have a iPhone 4S and when watching videos on the internet sound cuts out as the video is playing. The rest of the video plays with no sound. Sometimes when I pause It and play again sound comes back but not all the time. can anyone help?

    The "restore disk" is built into the Mac. See About Recovery.
    Need more specifics about what error messages you got while installing Adobe Flash.
    However, you can almost avoid Flash altogether by setting YouTube to play the HTML5 version instead.
    Click the Try something new! link at the bottom of the YouTube page.
    I don't know about the sound issue. Might be hardware as you think. Try other headphones to check.

  • TS1717 When in the iTunes Store and listening, tunes cut out after 15 seconds of play. Anyone know what is wrong? Windows 7 system and I've got latest iTues software.

    When in iTunes Store sample tunes cut out after 15 seconds - would be nice if I could listen to the entire sample play. I'm using Windows 7 and have latest iTunes software. Anyone have a solution?

    I had the same problem,  finally found a similar question on here and what resolved it! Hope this works for you..
    1st:click START
    2nd: ACCESSORIES
    3rd: RIGHT CLICK on COMMAND PROMPT  *a window will pop up..which will say "Run as Admin."  ..you must put in Admin. password*
    4th: CLICK CONTINUE
    5th: *a black screen then comes up..and from where the words end (it's blinking)...continue from there... simply type
    ipconfig/flushdns    ...then it the ENTER KEY
    Let me know if this works for you. Good luck.
    MistyBlues

  • Can anyone tell me if there is a solution to this.....since downloading the new 07 software on my iPad, Skype talks are always cutting out after a minute or so.

    Since downloading the new software 07 onto my iPad, I have endless trouble with my Skype talks always cutting out after every few minutes or seconds of talking. Can anyone tell me if there is a solution to this?  Many thanks

    You are adventurous. Nothing wrong with your Mac. If I were you I would leave terminal and Console alone until you get familiar with your Mac. Even then unless you absolutely know what you are doing in Terminal you could end up with an expensive door stop. Play around with iPhoto, Safari Address Book, iCal. Read some Mac books from your local bookstore. Hang out at the forums. in short just have fun.

  • HT204406 some of the songs i have downloaded from iclouds cut out after about 50 seconds? Has anyone else had this problem?

    Some of the songs I have downloaded from iclouds cut out after about 50 seconds when i play them? Has anyone else had this problem and if so did you manage to fix it.
    Thanks

    I've had this happen several times... I suspect the download was interrupted for some unreported reason so it only has a partial file or has a corrupt byte in the file it failed to catch.
    Just delete the local copy and re-download from the cloud and they play fine.

  • Just downloaded iOS6 onto my iphone4 and now my playback repeatedly cuts out after a few seconds--a particular problem with podcast playback. Anyone else out there have this problem??

    Just downloaded iOS6 onto my iphone4 and now my playback repeatedly cuts out after a few seconds--a particular problem with podcast playback. Anyone else out there have this problem??

    bump

  • HT204380 FaceTime freezes and sound cuts out since updating I Pad2 with IOS7.0.2. Is anyone else having this?

    FaceTime freezes and sound cuts out since updating I Pad2 with IOS7.0.2. Is anyone else having this?

    reset all settings
    settings- general- reset - reset all settings
    now reconnect to wifi
    settings - wifi- click network name - enter password - join
    if issue persists backup info and restore via itunes
    Peace, Clyde

Maybe you are looking for

  • End-user notification is not working for one of the untagorized HTTPS webistes on IronPort WSA

    When users try to access the URL https://cloud.skytap.com/tools/connectivity they are getting 'Internet Explorer cannot display the webpage' instead of regular IronPort WSA end-user-notification. This URL is currently uncategorized. Please advice.

  • 8i Installation

    Can I install 8i EE on a workstation installed edition of Redhat 6.1, or does 8i EE have to be installed on the Server installed edition of Redhat. I want to be sure I have the ability to create Databases.

  • Cannot open kernel menu configuration

    In both architectures, when I go to /usr/src/linux and enter a: make menuconfig This is what I get: scripts/kconfig/mconf arch/i386/Kconfig drivers/crypto/Kconfig:44: can't open file "arch/s390/crypto/Kconfig" make[1]: *** [menuconfig] Error 1 make:

  • How do I get duplex printing with MS Office on HP 1320n

    Hi I have an iMac running Snow Leopard. I have Office for Mac 2010 installed. I use an HP1320n Laser printer If I print an email, or a pdf, the print dialog options show a tick box for me to choose two sided printing - and this works fine But if I pr

  • Maintaing Sales Area Data via MASS

    Hello Experts We'd like to maintain sales area data of customers via transaction MASS. However we get an such a message "Field PARTNER_GUID does not have a foreign key; as a result no intervals are allowed" and are not able to create BP sales data. D