ONC RPC help for student

Hi
I really need the help of someone with knowledge of ONC RPC. I have to do a project giving a practical demonstration of RPC but I do not know where to start. I have never programmed in C before but I believe that this may be the way I need to go. What I am aiming for is amending a program that calls a remote procedure that adds 2 numbers together. I am ok with the theoretical stuff about how RPC works but do not even know what sw I need to do a practical demo of it.
Please, please if anyone can tell me where to start, I have found lots of material but it is a bit complicated with my limited knowledge, I would be grateful of any help
Thanks
C

http://docs.sun.com/db/doc/805-7224

Similar Messages

TS1702 i've an iphone 3.1.3. sometimes, i have problems opening all the apps i downloaded in the past 4 months. other apps would open but the recent ones will begin to boot and then close itself. once, it persisted for over a week. pls help as am frustrat

i've an iphone 3.1.3. sometimes, i have problems opening all the apps i downloaded in the past 4 months. other apps would open but the recent ones will begin to boot and then close itself. once, it persisted for over a week. it staarted again this evening, pls help as am frustrated. NB- i checked for apps update but all my apps are up-to-date. CT

Try the usual steps: restart, reset, restore.
http://support.apple.com/kb/HT1430
http://support.apple.com/kb/HT1414
If restoring using a backup doesn't help, try restoring the iPhone to factory settings and try for a while with just the Apple-included apps, to make sure it's not an issue with a third-party app. If it still has problems, it may have a hardware problem and will need to be sent to Apple.
Regards.

Even I cant believe this is happening again! i'm once again asking for help with my account. Since im very sick I ask that u look into my account and read the hell verizon has put me through and assist ending the hell once and for all even if that means

Even I cant believe this is happening again! i'm once again asking for help with my account. Since im very sick I ask that u look into my account and read the hell verizon has put me through and assist ending the hell once and for all even if that means ending my contract, i just want the hell over. I went into my bill tonight and the mess was still there I paid $110. that's what I owe

I guess I spoke too soon! I really can't believe this nightmare is not over yet! My account is still wrong. The credit that I was due totaled $63.00 I am looking at a message on my phone saying that $21.01 was credited which makes my balance $219.72. I received a text the following day that says, I processed your credit of $30.00 and your new balance $216.73 how is that possible? None of the late fees were credited and the amount due for my monthly charges are wrong. Before any changes were made to my data plan back in Nov. My monthly charges were $140.00, I needed my hot spot back and i was told that the hot spot will increase my bill $10 for each phone that totals $20. The customer rep that change my data plan at that time also gave me a credit of $20 to compensate for the increase until I had time to talk with customer service about the mix-up with my Hot spot. I originally had the hot spot, but the rep that change my plan almost a year prior told me nothing was changing except I was getting more for less money. I explained to that rep that I need my hot spot 4 times a year...and I don't want my plan to have any changes. To verify what I'm telling u check my account and see that I called from Albany New York wanting to know where my hot spot was and I was told I didn't have the hot spot on my account since the last data change! I lost money once again due to the verizon rep's. so my current data plan the rep promised would increase $20 which makes my monthly charges that were $140 prior to the change $160 after the hot spot was returned to my account. Then I was given a $12 credit per month for 12 months because of so many mistakes made to my account so with that $12 credit my monthly charges should $148 + surcharges + taxes and that's not what I see. I do know this much right now my account is in such a shambles I can hardly see the light at the end if there is an end! I need real help!
>> Personal information removed by Verizon Moderator to comply with the Verizon Wireless Terms of Service <<

I have created a form which needs to be completed once a week for 6 weeks. On completing week 1, weeks 2 - 6 are completed at the same time with week 1 information. please help?

I have created a form which needs to be completed once a week for 6 weeks. On completing week 1, weeks 2 - 6 are completed at the same time with week 1 information. please help?

Hello, thanks for replying.
Yes they just copy to the next page, the fields are the same. The document is an observation to school lessons so it needs to be consistent but with different data on.

To purchase lightroom 5 for student and teacher edition, upon check out "Error in Your Order. Account registered for a different country. Please help. Thanks.

to purchase lightroom 5 for student and teacher edition, upon check out "Error in Your Order. Account registered for a different country." Please help, thanks.

Hi boags2014,
Please refer this link and know the work-arounds for the same:
How do I complete a purchase when I get an incorrect "country" error?
Regards,
Anubha

Need Photoshop and Bridge: does Creative Cloud for students/teachers include both?[was: I'm confused, need help]

I'm a photography student about to start University. And I need Adobe Bridge and Photoshop for me to edit my photographs. The cheapest Creative Cloud for students/teachers is £8.78 a month, does this include both Bridge and Photoshop? If not does that mean i'll have to buy the Complete Creative Cloud for £15.88 a month?

Bridge is included with Photoshop. The package you are asking about also includes Lightroom, I believe.

Resignation from studies with Adobe CC for students

I have a question.
When I buy Adobe CC for students (subscription for 1 year) and for some reasons I had to make resignation from these studies - will the subscription still work or will it be illegal copy in this case?
Regards,
Kacper

Hi kacper,
I would like to inform you that once you purchased Adobe CC for students (subscription for 1 year). It will be valid or active for complete 12 months. You would be able to use all the CC applications. After that, we'll renew your contract automatically unless you cancel. The price is subject to change, but we will always notify you beforehand.
About Cancellation
If you cancel within the first 30 days, we'll give you a full refund. Otherwise, you'll be billed 50% of your remaining contract obligation. If you ever need to cancel, just call Customer Support http://www.adobe.com/support/download-install/supportinfo/
Let me know if you need more help.
Thanks!
Eshant

Creative Cloud for Students number of machines

So I plan on buying The Creative Cloud for students, however, I need to knowhow many machines the license covers. I currently own 3 workstations, (computers that I plan on using CC on) 2 of which are lap tops.
If I am to buy it (once again, this will be the student version for 99$ a year) I would like to know how many machines I am allowed to install the software on. If I am able to JUST install it on one, I would have to install it on my desktop and then never be able to work on the go.

Thanks Jeff. I was just unable to find the information on the STUDENT addition. I knew the regular CC was avaliable on 2 machines, but wasn't sure about the student's software. When attempting to purchase, there was no link to the policy page, which I think is odd.
Sorry I posted this in the wrong area, just wasn't sure if it should have been under policy or the install. Turns out both were wrong.
Thanks again. I hope someone is able to read this and get help later down the road.

I have been charged 3 times for student premium and am still on free.

I have been charged 3 times for student premium when it says I can't be verified that I am a student even though I manually sent it in 2 hours ago and still haven't gotten anything back from spotify. I've checked email and spam and have emailed them again and hour ago and still nothing but I still lot chanrged...why?

Hey there , welcome to the community!
If you contact Spotify through online contact form, they will be able to sort out these multiple charges and see what's going on with the student verification. Once you send in the form, you should receive a reply from them within 24-48 hours. If you need any further help, let me know! :)

How do you allow Unix based ONC RPC within the security constraints of SGD

On our new boxes running SGD 4.2.91and up we notice that our applications that uses rpc to communicate no longer work. One of the programs, the arbitrator, (i.e. runs in its on process space, not a linked in library). Therefore, two user will share the same arbitrator (or conversely, only one arbitrator runs per machine). The arbitrator runs without a display (i.e. has no stdout, etc, similar to a daemon). The arbitration process also uses the UNIX kernel resource of shared memory. Here is what I have observed with my testing. The arbitrator routine is successfully registered in the port map ( svc_register). This means it does run. But later when svc_run is called, the process is not found ( actually the select fails), and ps �ef | grep arbitrator indicates that the arbitrator is not running

Does SGD put any restrictions/constraints on ONC RPC, ie does it attempt to block or authenicate?
What object list_attributes does the application that luanches arbitrator need?
Does abribrator need to be in the list of allow applications for the current user? Can it be put in this list and not have an icon on the desktop ( since the user does not manually launch it, and usually is not even aware of it)?
Or, more generally, how does the enumerated allowed list of executables handle a process that exec/forks a new process? ie does SGD have to know the forked process name, etc?

F4 help for one field in modulepool program..(Possible values)

Hello Experts,
I have 3 fields in my module pool screen.
PLANT, MATERIALNO AND STORAGELOCATION.
BASED ON PLANT AND MATERIAL I NEED TO PROVIDE F4 HELP FOR STORAGE LOCATION(LGORT).
How can i write the code in PROCESS ON VALUE REQUEST ..
AND WHICH FUNCTION MODULE SHOULD BE USED.
Please can anybody send me the code asap.
I will give u full points if ur code matches my requirement.

Hi Raja,
 i will send a sample code for ur problem check in once..In that code i explicitly hardcoded the values for serchhelp.Instead of that we have to use select statement based on ur condition and place them in internal table ok.
FUNCTION MODULE:
F4IF_INT_TABLE_VALUE_REQUEST.
CODE:
*& Report YSEARCHHELP *
*& DEVELOPER : KIRAN KUMAR.G.A *
*& PURPOSE : DEMO ON SEARCH HELP *
*& CREATION DT : 27/12/2007 *
*& REQUEST : ERPK900035 *
REPORT YSEARCHHELP.
INTERNAL TABLE FOR STORING NAMES IN SELECTION LIST
data: begin of t_itab occurs 0,
 name(10) type c,
 end of t_itab.
*FIELDNAME AND TAB NAME FOR THE SELECTION
DATA :field_tab LIKE dfies OCCURS 0 WITH HEADER LINE.
*THE TABLE FOR RETURNING THE NAME OF THE SELECTED ITEM
DATA : return_tab LIKE ddshretval OCCURS 0 WITH HEADER LINE.
*START THE SELECTION SCREEN BLOCK
selection-screen begin of block ss1 with frame.
parameters: p_name1(10) type c.
selection-screen end of block ss1.
*& F4 Help for p_name1 *
at selection-screen on value-request for p_name1.
*CLEAR ALL EXISTING DATA
*TO BE DONE EVERYTIME F4 HELP IS REQUESTED
REFRESH t_itab.
REFRESH field_tab.
field_tab-fieldname = 'ERNAM'.
field_tab-tabname = 'VBAK'.
APPEND field_tab.
t_itab-name = 'Andrews'.
append t_itab.
t_itab-name = 'Jennie'.
append t_itab.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE = ' '
 retfield = field_tab-fieldname
PVALKEY = ' '
DYNPPROG = ' '
DYNPNR = ' '
DYNPROFIELD = ' '
STEPL = 0
 WINDOW_TITLE = 'Select name'
VALUE = ' '
VALUE_ORG = 'C'
MULTIPLE_CHOICE = ' '
DISPLAY = ' '
CALLBACK_PROGRAM = ' '
CALLBACK_FORM = ' '
MARK_TAB =
IMPORTING
USER_RESET =
tables
 value_tab = t_itab
 FIELD_TAB = field_tab
 RETURN_TAB = return_tab
DYNPFLD_MAPPING =
EXCEPTIONS
 PARAMETER_ERROR = 1
 NO_VALUES_FOUND = 2
 OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
else.
p_name1 = return_tab-fieldval.
ENDIF.
Award points if helpful.
Kiran Kumar.G
 Have a Nice Day..

Can i get a new serial number for Adobe CS6 Design Standard for Students and Teachers?

I have had to re-install my Adobe CS6 Design Standard for students and teachers after having problems with my computer (MacBook Pro)
I am wondering if there is a way to access my old serial number from when I originally installed CS6, or do I have to start over again and get a new serial number?
Help is greatly appreciated!!

You normally use the same serial number that you are first issued. If you registered your product when you first installed it then you should be able to find your setial number available thru your Adobe account online.

Search help for Custom Item level field

Hi All,
I have two custom fields at Item level. Both of them has fixed values defined at domain. The fixed values have a short text also given with them.
The problem I am facing is when SRM provides default search help for these custom fields, for first field the 'Value' and 'Description' comes in the search result screen, but for second, only 'Value' comes in the search result.
When I try to debug, it shows the SHLPTYPE as 'SH' for first one and for the second as 'FV'.
What does this indicate?
My requirement is to display both value and description in the search result screen.
Please suggest.
Thanks
Nandalal

Hi
Sorry for the delay. My User got locked for some time.
I have seen the document you sent me on my email id.
 I noticed in the case where the Search help is working fine, there is no space in between the contents of the Fixed values and their short text under the value range tab of the Domain element.
But in the case, where there is a problem with the search help. There both the Fixed values and their short description is having a space in between the words.
Try maintaining COND_A instead of "COND A". Also with the short description use "COND_A" instead of "COND A".
I hope this will resolve the issue.
Update me once you have any issues.
Please reward suitable points, incase it suits your requirements.
Regards
- Atul

Is there a discount available for students who wish to subscribe to Creative Cloud?

Hi, My name is Irene, and I am the president of the Yearbook club. My job there is to help out with making and designing each year's yearbook. Because of this, I decided it was best to get a creative Cloud Licence and download PS and Illustrator to my computer, but I don't want the whole pack for 50$, I am just interested in getting two licences for PS and Illustrator. Is there a special discount for students to get this programs?

Hi Irene,
Yes there is a special pricing, please refer to the following link for more information :
https://creative.adobe.com/plans
Regards,
Akshay

Can we provide new f4 help for a field in a list using grid display

Hi Gurus,
Can I provide F4 help for field in edit mode for (which is not using any std. data type, uses only custom char field ) in the list displayed using CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'.
I know this can be done using OOPS concepts but, I need to know whether it is possible in this manner.
And please dont suggest me to use CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE' to get automatic f4 help.
I need to provide F4 help with my own logic once I press F4 in the edited field in GRID_DISPLAY
Regards
Mac.

Hi Macmohan,
You have to use F4AVAILABL attribute of fieldcatalog to achieve this.
lv_fldcat-f4availabl = 'X'.
lv_fldcat-ref_table = 'T582A'.
lv_fldcat-ref_field = 'ZEITB'.
This works with ALV GRID CONTROL
Regards
Abhii
Edited by: Abhii on Dec 16, 2009 3:37 PM

ONC RPC help for student

Similar Messages

Maybe you are looking for