Once 7610 the pc pairs with it, pc suite couldnt s...

hi there,
i've been searching through out the forum and there's no one having this problem.
pc suite 6.82.22
nokia 7610
windows pro xp service pack 2
ziga (brand) bluetooth, it works previously. so i don think it has a problem with the bluetooth device.
here's my problem,
after i changed my phone's name to a new one(connect > bluetooth). and it started to have problems.
tried reinstall pc suite several times and still doesn't work.
So started with get connected button on the pc suite, it found my phone, and i connect it. so the passkey windows pops out. and i key the same on my phone, once i tap DONE on phone. phones just nothing happens. but pc detects my phone, installed and not in the control panel it found my phone. But in the PC suite there's nothing happens. that passkey window doesn't let me click next. i clicked cancel and do a new search. now it doesnt detects my phone. once i remove the phone from the control panel. PC suites found my phone. but having the same problem. once i keyed my code on my phone, i just couldnt click next on the PC suite passkey window. cancle, and do a new search..phone not found.
previously it works before i change my phone's name. i dont understand why it doesn't work now. previously it was the same Version of PC suite. Any Help? thanks alot, and appriciate it.

Hi,
Try this:
1. Go to Windows' Control Panel and open "Add or Remove Programs" application.
2. Select "PC Connectivity Solution", click "Change" and then "Repair".
3. After Repair, restart PC.
If not, then try this:
1. Unpair you phone via BT stack.
2. Remove you paired PC-information also via phone BT-UI
3. Restart PC.
4. Run GCW and pair your phone -> if it is not go to end (wait e.g. 2 minutes), press cancel and restart PC. After that start e.g. Nokia PC Sync application > Select Phone > Refresh.
Does this help?

Similar Messages

I have two iMac's on the same desk. Once iMac pairs with both keyboards and mice. The other pairs with the mouse, but I cannot get the keyboard to connect. How do I get a keyboard and mouse to connect to each iMac independently?

I have two iMac's on the same desk (about a foot apart). One iMac pairs with both keyboards and mice. The other pairs with the mouse only; I cannot get the keyboard to connect. How do I get a keyboard and mouse to connect to each iMac independently?

Antaeus00 wrote:
I tried sending a request for help,
But did you succeeed in sending a request for help?
Did you receive a response? How long has it been since you sent a request?
but I need someone with more authority to talk to.
There is no one with more authority than iTunes store support. We herem are only users.

I purchased a Holux M-1200E Bluetooth GPS Data Logger. The device paired with my laptop just fine so I know it is working right. The device will not even show up on my iphone or ipad to pair via bluetooth. Is there a way to pair without jailbreaking???

I purchased a Holux M-1200E Bluetooth GPS Data Logger. The device paired with my laptop just fine so I know it is working right. The device will not even show up on my iphone or ipad to pair via bluetooth. Is there a way to pair without jailbreaking??? I haven't had any trouble to date pairing any devic with my iphone or ipad, this is ridiculous!!!! Is there a way to update my bluetooth settings on my iphone 4s to be able to have this device be recognized??? I love my apple devices, but this is very frustrating. I bought this Data Logger for a specific purpuse to help out with my Search and Rescue volunteer activities, and I really need help with this!!! I am hoping apple will help me!!!
Thanks,
Melissa

melissafromlenexa wrote:
That is not the right device, it is the
Holux
M-1200E Bluetooth GPS Logger
I looked at the same sight for that and it does not say that. This is the first time I have posted a question, you don't have to be mean about it. I am trying to get this to work for a good cause.
It may be the best source of assistance is the manufacturer of the device. I suspect you will need a specific app for the iPhone to get it to work, but the site is rather ambiguous about that.

I have iphone 6 with ios 8.1.1. The bluetooth pairs with my sony car radio and everything works fine. However, the iphone won't stop searching for other devices.

I have an iPhone 6 with ios 8.1.1 operating system. The Bluetooth pairs with my Sony car radio and works fine. However, the iPhone will not stop searching for other devices. This does not seem to affect anything, but I can't help but think it is using battery power.

One possibility:
How do you know it is searching for other devices? Because you opened Settings > Bluetooth?
Why is it searching for other devices? Because you opened Settings > Bluetooth?

Brand new Macbook Pro not pairing with Apple Keyboard and mouse!

Hi all, I have a brand new Macbook Pro and an older wireless Apple Keyboard and Mouse (that were being previously used with my imac G5).
Now I want to use these for this macbook. I am finding that they are being recognised but not pairing up?
Do you need to stop the previous pairing with the imac before they will pair with the Macbook?
Or do I need to update specific software? (I would have thought it has all the necessary updates already installed).
I am running Snow leopard.
I have brand new batteries in the keyboard and mouse.
I really appreciate any helpful advice. Sorry if the answer is obvious!
Thanks

Hi there, i had a problem pairing an Apple wireless keyboard with my MacBook pro but managed to solve it.
The default passkey option in Bluetooth setup assistant is 'automatic' which will (if the MacBook can 'see' the keyboard in the first instance) then say something like 'your device may prompt you to enter the following passcode 1234 5678'
Obviously the keyboard doesn't provide any feedback - I went ahead and typed the number and hit the return key a number of times - the MacBook then displayed a 'pairing failed - you may have entered the incorrect passkey' message.
What i was doing wrong was keying only numbers - when i keyed 1234[SPACE]5678 + RETURN pairing worked.
I had thought the 'gap' in the passcode was to make it easier to read, not that it implied a space in the passcode.
Hope that helps.
Simon

Ipod 5th Gen is stuck on the apple logo with the loading bar not moving

So I recently decided to restore my iPod 5th gen to factory settings, because I plan on selling it to a friend. When I chose the option to erase all data and reset settings, the iPod turned off, and then came to the black background with the apple logo in the middle. After watching it turn on and off, and not do anything for at least an hour, I searched for answers on the forum. I found that I should reset my iPod by holding the center button and the top right button at the same time for at least ten seconds, or until the device shuts off and then the apple logo is visible again. After I did this, once again, the black background with the apple logo popped up, this time with a loading bar beneath it. After an hour or two of checking on the progress bar, I noticed that it had not made any progress whatsoever. It had not moved an inch since I first started it. What do I do?

- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

HT204368 Iphone won't pair with any bluetooth devices

Iphone won't pair with any bluetooth speakers, earbuds or car stereo. The devices pair with other phones computers etc. Jawbone Jambox says it's paired with Iphone but Iphone still says not paired! what's wrong? Iphone also doesn't ring or signal text or reminders just vibrates.

did that already twice. no pairings listed until I turn on bluetooth device then it just say not paired and pairing not successful. Jambox says it's paired but Iphone says not paired. Plus the ringer problem. When I choose a ring tone or sound it plays but when the I get an incoming call or text it just vibrates. And sometimes Itunes and youtube has no sound. What's going on?

HT1560 If diagnostics says appletv is working properly, why does the install keep getting stuck on pairing with the computer then back to select resolution over and over.

First gen Appletv suddenly stopped working from one night to the next. This has happened in the past once and the usual restore, reboot, etc, tinkering finally snapped it back into working quite unexpectadly. The symptom is, after restore when it gets to the screen to pair with itunes by entering the numbers in itunes, the number is briefly up on the tv screen and then quickly is gone returning to the select resolution page. This happens over and over with each try while the Appletv never shows up in itunes and the number box never appears either to pair the computer with the Appletv. It does the same thing with my intel macbook so I don't think it's the Imac. I have dumped itunes 10 and reloaded itunes 9 with no change in the problem. My IP scanner picks up that the Appletv is on our network as soon as it turns on. I have used wireless, which it finds and logs into, and ethernet which also has it finding my network. I can't test whether it is actually on the network by trying to play a trailer or something because it will not go past that pairing screen in the initial setup. Are the built in diagnostics reliable when they say your appletv is working correctly. The hard drive isn't making any exceptionally loud noise as it spins up. I am stuck with this unit because I use it with a G4 Imac running Tiger 10.4 for a video/audio jukebox at the bar. New ATV won't work with the Imac unless it's running leopard I believe. The thing runs like molasses already so attempting leopard which I don't have anyway would really make it crawl. I love a good mystery/problem but this thing is driving me crazy. If I just could know for sure what component inside was shot I would replace it. Could a hard drive boot up to a degree and then get stuck at one part of the install, or would it have to be the logic board, or something else. Bad juju in the house or something

Had same problem this finally stopped it for me.
FINDER
APPLICATIONS
UTILITIES
DISK UTILITY.app
select your main hardrive
REPAIR DISK PERMISSIONS
Message said repairing estimated time 1minute, yeah okay we all know how accurate those are process took about 5 minutes with nothing showing then all of a sudden printer permission repaired notations were flying onto screen in actions box. Do restart for heck of it sign on and so far no message has apeared where it did regularly. I hope this is indeed the fix. In meantime it never hurts to fix permissions so give it a try.
George in NY

My iMac 24 can no longer be paired with the keyboard; it doesn't recognise any keyboard at boot up, even the one it is paired with. Can anyone help, please?

My iMac 24 can no longer be paired with the keyboard; it doesn't recognise any keyboard at boot up, even the one it is paired with. Can anyone help, please?
Thank. Simon

Brian - The batteries are fine and there has only every been one keyboard paired with it. We have tried my MacPro keyboard as well, and it will not even recognise that there is a discoverable keyboard nearby.
Thanks, Simon

I've downloaded the Creative Cloud, once completed the creative cloud window pos up with spinning whell in center then the entire window disapears. How do I get it to remain open so that I can download programs needed.

I've downloaded the Creative Cloud, once completed the creative cloud window pos up with spinning whell in center then the entire window disapears. How do I get it to remain open so that I can download programs needed

right click the executable > click 'run as administrator'.

How do I pair a bluetooth headset when my MAC doesn't recognize it? The hedset work properly because they are paired with my iPhone. The headset is not an Apple product. It'd 3rd party.

How do I pair a bluetooth headset when my MAC doesn't recognize it? The hedset work properly because they are paired with my iPhone. The headset is not an Apple product. It'd 3rd party.

Ask the headset manufacturer.
Barry

I just downloaded the newest IOS software and now my iPhone5 won't pair with the Bluetooth in my car (the car system says it's paired when I try to re-pair it but then when n try to make a call it tells me it doesn't recognize the phone.

I just downloaded the IOS upgrade, 7.0.2, and now my iPhone 5 won't pair with my Bluetooth in my car, despite repeated attempts to re-pair the two and despite the fact it's been paired fine previously. The car system tells me it's paired but then when I try to make a call I get another message that says there is no paired phone.

You can't override it no matter what you do. The device has to connect to the server to complete the iOS update. You could try rebooting the iPad and see if that lets you connect to the server after it starts up.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If that will not work, you can try connecting to iTunes on your computer and see if the activation will complete. Sometimes when thes activation issues arise, you end up having to restore the device again, but first things first. Reboot and see what happens.

I have a Macbook and I left it unplugged. It started up slowly when I plugged it in again, but it seemed fine. Once it started charging I shut it down so it would be easier, but now it will not go past the grey screen with the apple. What do I do?

I have a Macbook and I left it unplugged. It started up slowly when I plugged it in again, but it seemed fine. Once it started charging I shut it down so it would be easier, but now it will not go past the grey screen with the apple. What do I do?
I have Snow leopard on my computer, and I tried to do a hard restart as an article suggested, but it did not work. I also tried cleaning out the PRAM.
The only things I did last night:
-cleaned the history of Firefox out, including cookies
-let it unplugged all night
-plugged it back in the morning, it took a long time to figure itself out, but eventually the time was correct and I got on the internet for a bit
-shutdown the computer since I was going out and thought it would help the computer charge
-came back, tried to turn it on, and found that it would not go past the grey screen the apple on it and the spinning wheel even though I left it for 20 minutes or more
-tried turning it off and on to no avail

Before doing a reinstall, which may not be needed at this point,
Try using Disk Utility to do a Disk Repair, as shown in this link, while booted up on your install disk.
You could have some directory corruption. Let us know what errors Disk Repair reports and if DU was able to repair them. This could just be a start in repairs and you may need a better utility to finish the job.
Then Repair Permissions.
No need to report any Permissions errors........we all get them.
 DALE

A lost my remote control for apple tv. I want to use my phone as a remote but the applications can' pair with the Apple TV device , how can I pair them without remote?

A lost my remote control for apple tv. I want to use my phone as a remote but the applications can' pair with the Apple TV device , how can I pair them without remote?

Setup for remote app: http://support.apple.com/kb/ht1947
Specifically:
Set up Apple TV (2nd and 3rd generation)
On Apple TV, select Settings from the main menu.
Select General > Remotes > Remote App. If Home Sharing isn't set up on your Apple TV, you should turn it on.
Apple TV (2nd and 3rd generation) uses Home Sharing to stream content from your iTunes library on your computer to your HDTV. If you connect your Apple TV to your iTunes library using Home Sharing, you can use Remote to browse and play content from any iTunes library in the Computers section of your Apple TV. You can also use Remote to select between available speakers to enhance your audio and video experience.

HT1947 The lastest app will pair with my 9.2.1 library but not control it. I refuse to use 10 as it has a feature that degrades the sound via the airport express so I no longer can use my library, any anwers? How can I get the older app back on my IOS 5 d

I have an Iphone 4 on the latest IOS 5 and latest 2.3 remote control app as I use Itunes 10 to manage the phone. Since version 10 of Itunes the airport express output has been degraded with a digital volume control so I refuse to use version 10 for my lossless audio. I specifically purchased the AE knowing that I would have pefect lossless digital audio to pass on to my high end music system (I understand that turning the volume to the maximum should have the same result but to me it just does not sound as good as with itunes 9). This step back with version 10 of Itunes has made me determined to stay with Itunes 9.2.1 Now I find that the upgraded version of the remote control app will not pair with or control a 9.2.1 library. Does anyone have a solution that does not involve using Itunes 10 to stream my audio under the control of the Iphone. I would dearly love to just go back to an older version of the iphone app but again how can that be done? Or better still have the option in Itunes 10 to have garanteed bit perfect output to airport devices as many people would really appreciate this as true lossless audio is essential for many serious music lovers.
Kind regards from a disappointed apple owner and dedicated music listener.

Strangely enough the pref file did not show up in the Preferences folder. I don't know what this means but it could be signifigant.

Once 7610 the pc pairs with it, pc suite couldnt s...

Similar Messages

Maybe you are looking for