Once again wpa_supplicant problem:

I'd like to `upgrade' my wireless connection from the not-so-good wep to the shining wpa2, but I continue having problems...
Some general informations, I think everything is fine:
# lspci | grep lan
02:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
# rmmod iwl3945
# modprobe iwl3945
# cat wpa_supplicant.conf
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=wheel
network={
ssid="rimururu"
proto=RSN WPA
#psk="not so secret"
psk=9481d66541c04cb6c00870ad872d0c233fb05bac609eb4674be0fff6e17b8f30
# pacman -Qi iwlwifi-3945-ucode
Name : iwlwifi-3945-ucode
Version : 15.32.2.9-1
URL : http://intellinuxwireless.org/?p=iwlwifi
Description : Intel wireless firmware for Intel PRO/Wireless 3945ABG/BG
Yet, when I try to associate... it does not work:
# ifconfig wlan0 up
# iwlist wlan0 scan | grep -v 'IE: Unknown'
wlan0 Scan completed :
Cell 01 - Address: 02:05:B4:04:FA:84
Channel:6
Frequency:2.437 GHz (Channel 6)
Quality=49/70 Signal level=-61 dBm
Encryption key:on
ESSID:"rimururu"
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
12 Mb/s; 24 Mb/s; 36 Mb/s
Bit Rates:9 Mb/s; 18 Mb/s; 48 Mb/s; 54 Mb/s
Mode:Master
Extra:tsf=00000000223da181
Extra: Last beacon: 90ms ago
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : PSK
Preauthentication Supported
# iwconfig wlan0 essid rimururu
# wpa_supplicant -iwlan0 -c /etc/wpa_supplicant.conf -Dwext
CTRL-EVENT-SCAN-RESULTS
Trying to associate with 02:05:b4:04:fa:84 (SSID='rimururu' freq=2437 MHz)
Associated with 00:00:00:00:00:00
Associated with 02:05:b4:04:fa:84
WPA: Invalid EAPOL-Key MIC when using TPTK - ignoring TPTK
WPA: Could not verify EAPOL-Key MIC - dropping packet
Authentication with 02:05:b4:04:fa:84 timed out.
CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
ioctl[SIOCSIWENCODEEXT]: No such file or directory
CTRL-EVENT-SCAN-RESULTS
Trying to associate with 02:05:b4:04:fa:84 (SSID='rimururu' freq=2437 MHz)
Associated with 02:05:b4:04:fa:84
CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
ioctl[SIOCSIWENCODEEXT]: No such file or directory
Associated with 02:05:b4:04:fa:84
CTRL-EVENT-SCAN-RESULTS
WPA: Invalid EAPOL-Key MIC when using TPTK - ignoring TPTK
WPA: Could not verify EAPOL-Key MIC - dropping packet
^CCTRL-EVENT-TERMINATING - signal 2 received, stopped because it continues forever... Imagine a `goto line 6'.
The `ioctl[SIOCSIWENCODEEXT]: No such file or directory' sounds fairly suspicious, but I have no idea (nor google I'd say) of the meaning.
Any idea? Thanks for any insight.

parintachin wrote:try this
network{
       ssid="youressid"
        proto=RSN
        key_mgmt=WPA-PSK
        pairwise=CCMP
        psk="your secret in plain text"
#or psk=your secret as hex
Thanks, but before coming here I tried all combinations... CCMP, TKIP... Even set group=CCMP. It seems having not effect

Similar Messages

  • Macbook Pro Memory (Once Again) & Other Problems

    Been looking once again at memory for my Late 2011 Macbook Pro and altho i can upgrade to 16GB i have been told by an Autherised apple repairer and supplier that 16GB would be far too much for what i use my macbook pro for and that 8GB would be a good upgrade.
    I have been told from "Kappy" on another post that i have the following problem
    "your free memory is a little low, and you have PsgeOuts greater than zero which all means you are running low on memory for the number of concurrent applications running. Some disk swapping is occurring and that should start slowing down the computer. It will also lead to drive thrashing which can cause more heat from the drive and more slowing down along with the SBOD"
    Now if i upgrade from my standard 4GB to 8GB would this help with the above comment that kappy has pointed out ?
    I have also found this on ebay and im thinking thats its a good buy, Can someone confirm that this is the correct memory and thats its a cause of plug and play in my late 2011 macbok pro 13"
    Ebay Link - http://www.ebay.co.uk/itm/Kingston-RAM-Memory-8GB-2x4GB-DDR3-PC3-10600-204-pin-i Mac-Macbook-Pro-Laptop-/121312913234?pt=UK_Computing_ComputerComponents_MemoryRA M_JN&hash=item1c3ed02752
    Here is my macbook specs and things also.
    I currently have the app iStat Menu's which gives me lots of information and details and one of them is teh Temp of my Macbook abd how how its getting.
    Can someone tell me at what point my fans are ment to start up in teh default setting as the temp went all the way up too 76 Degrees and then i moved it to over to the custom setting and put the fans to 6200rpm to bring the heat back down.
    Is there anyway that i can reset the fan or fan sensors ?

    As im in the United Kingdom (GB) prices are rubbish but im lucky enough as my uncle is in LA just now so he is going to bring me back this -
    http://www.crucial.com/store/listparts.aspx?model=MacBook%20Pro%20(13-inch%2C%20 Late%202011)&Cat=RAM
    The price is $160.00 which is around £96GBP

  • HT1414 My email account on my i phone will not allow me to enter new password.  Each time my phone says that the yahoo server is unavailable.  What is the problem so that I can once again get my email on my phone?

    My iphone will not accept my new password for my email account.  It keeps saying that the yahoo server is unavailable.  what is the problem and how can I get my phone to accept m;y new password so I can once again get my mail on my phone?

    This may work, try deleting the Yahoo email account from your phone and then re-add it, using your new Yahoo password.
    If that doesn't work, log into your Yahoo account from a computer and double-check that you are entering the correct password. Also, your password may be case sensitive, so enter it into your iPhone the exact the same way you created it.
    Let us know what happens!

  • Error message: your computer booted up once again because of a problem

    I have a Macbook Pro retina. Regularly i have a pop up window with the above mentioned error message. Regularly when i open up the lid of my macbook it shows booting all the used programs once again. Then it shows after booted up all the used programs the error message: your computer booted up once again because of a problem. I have the option to ignore or to send the rapport to Apple. Also sometimes my macbook is very warm and the battery is drained for a big deal. What the **** is wrong with it.

    If you are still under warranty and/or have AppleCare, call them.  Let them deal w/it.

  • MDT 2012 deploy OS from USB external drive failed - need to unplug and plug it once again

    We are using MDT 2012 and deploying Windows 7 using media (USB external hard drive). We can successfully deploy Windows 7 32 bit using this method but there is a problem with deploying Windows 7 64bit. This problem appears only on HP EliteBook 840. We can
    boot into WinPE 64 bit and can start proper task sequence, all image is applied then after restart, before logon screen appears there is an error saying that cannot find litetouch.vbs script. After clicking ok, I can logon to Windows and there is no usb external
    drive recognized. But when I unplug and plug usb drive once again it is recognized by Windows and can be used. I can see that Windows install some drivers just after plug it again
    I checked BIOS looking for some USB power options - there is no such settings. And 32 bit deployment works ok. So this is not a case. Looks for me like a problem with proper usb drivers for 64 bit. I download all drivers from HP website (driver pack and
    drivers only for USB 3.0). We are using make and model matching in MDT - works ok for all the rest hardware models. Any idea how to troubleshoot it?

    Not sure what's going on here. Is this a USB "Flash" drive or a USB "Hard Drive". There *Is* a distinction.
    I *thought* that MDT would copy itself to the c:\minint\scripts folder to continue installation.
    Next time, when you see this error, Press Shift-F10 to get into a cmd.exe prompt. Can you find litetouch.vbs on any of the drives? Does the USB Drive appear?
    IF in fact, the USB Drive is not appearing after the 1st reboot, then you have a problem. Why did the USB 3.0 driver not install. Check the Driver Installation Logs to verify.
    Keith Garner - keithga.wordpress.com

  • Report is not getting refreshed after changing prompts once again?

    HI,
    I am running some webi and deski reports using webi sdk also i'm handling the prompts of
    report.
    Problem is that if i ran the parametrized webi or deski report then my application shows the prompt page
    then i fill all the prompt for the report it shows the data for selected prompt values.
    But if i once again changed prompt values it shows data of previously selected prompt values not for
    the currently changed prompt values. means reports not getting refreshed.
    sometimes its work correctly.
    What will be problem?
    How can i resolve this issues?
    Please help me
    Thanks in advance
    Harshad

    The workflow is:
    1. Refresh
    2. Set Prompts
    3. Get View.
    then repeat.
    Are you refreshing before setting prompts?
    Sincerely,
    Ted Ueda

  • Once again, I need help...I'm starting to hate this board

    Ok, I'm going to start from the beginning. When I first built this computer last year, (specs at the bottom) everything ran seemlessly. I upgraded to WinXP and no problems. Then my hardrive started screwing up around mid-summertime. The computer would freeze, crash, ect. Various things. After doing some research, running diagnostics and calling IBM, it was decided that the drive had gone bad. So I took it out, and bought a new western digital. After installation of the drive, and installing XP on the newly formatted drive, I expected everything to work fine. It didn't. First, there were blue and black screens of death. Sometimes the blue screens would mention something about IRQ's not less or equal, sometimes something else. Sometimes the computer would just restart for no reason. So I reformatted again. This fixed the blue screen problem and for about a day, everything (I thought) was cool. Think again. To start, I couldn't run any 3d application for an extended period of time without it freezing. And if I set the CPU to 1.2 ghz (where it should be!) it gets even worse. I even tried uping the voltage a little. No help. Sometimes the computer would just (once again) restart for no reason. Especially while using winamp. I tried different drivers, different bioses, readjusting my fan on my cpu, running memtest86 (which showed the memory to be fine). I have read through MANY threads on the forums and tried many other things, with no luck. The current situation, after attempting to install WinXP servicepack 1 is that I cant even load Windows. It always gets to the point where the blue bar is moving across while it says WinXP, and then the computer restarts. I ran tests to check how the powersupply was running during use, nd all the numbers looked good. The thing that really pisses me off, is that everything use to work fine, before the IBM drive crashed. Guys, I need some expertise and a Beer. I can do the second one myself and will gladly get a case for whoever can help me straighten this out! Even if I just have some part that needs replaced, I just need answers! Thanks guys!
    Athlon 1.2 ghz 266fsb
    Msi nforce k7n420pro
    300W powersupply
    Integrated graphics
    256 mb Crucial memory
    yamaha 24x burner
    kenwood 52x cdrom
    floppy drive
    d-link wireless network card (could this be a problem? I was having problems before I got this card)

    All these guys with there power supply is a bunch of bunk and the combine this and that. a decent 300w psu will run the nforce with onboard vid or a geforce 3 easely. and forget all the combined crap.
    Heres what my 300watt power could handle before I gave it to my kid.
    MoBo.
    1900xp
    Geforce3
    Scsi card
    Modem
    2- IBM 60 GB 7200rpm
    Cold cathode ray tube 12"
    CD ROM
    Smart media reader
    And whatever else I plugged into the usb port and the only time I ever had Maveric's problem, which I had the same thing was when switch system driver from 1.0 to 1.05 they gave me the same thing he is having. so I stayed with the 1.0 until the 1.13's came along and they worked well.
    I suggest his is a driver issue IRQ not less then, Bksod or random restarts or other blue screen errors.
    Try the 1.00's
    Oh by the way now my kid uses my old 300watter on his 1900xp nforce machine, with all kind of toys and his is also stable. So Wonky and Athlonix quit suggesting that a 300psu is not sufficent when in fact it may work very well. oh and one more thing Athlonix GET OFF THE SOUND CARD THING!!! the onboard works, can't you get that in your head. Only yours doesn't every one elses does. can someone draw a picture of that
    Jim.

  • ITunes will not connect to the iTunes store once again

    Okay so last year when I updated my iTunes I could not connect to the store. I eventually got it to work. Well I went to update my itunes again to update my iphone and once again after itunes installed it will not connect to the store so I cannot update my iphone. I have deleted it and added it again in both norton and windows firewall and it still will not work. Any help would be great as this is a real pain.
    Thanks
    Here is the output when I run diag.
    Microsoft Windows Vista Home Premium Edition Service Pack 1 (Build 6001)
    LENOVO 0768A78
    iTunes 8.2.0.23
    QuickTime 7.6.2
    FairPlay 1.4.10
    iPod Updater Library 8.1d19
    CD Driver 2.1.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 2.5.1.3
    Apple Mobile Device Driver 1.43.0.0
    Bonjour 1.0.6.2 (118.5)
    iTunes Serial Number 7D8A8483B8B9A46A
    Current user is not an administrator.
    The current local date and time is 2009-07-05 22:10:14.
    iTunes is not running in safe mode.
    Video Display Information
    Intel Corporation, Mobile Intel(R) 945 Express Chipset Family
    Intel Corporation, Mobile Intel(R) 945 Express Chipset Family
    ** External Plug-ins Information **
    No external plug-ins installed.
    ** Network Connectivity Tests **
    Network Adapter Information
    Adapter Name: {EA374AA4-C2F2-4B22-8CF0-2DE8DCB49783}
    Description: Broadcom 802.11g Network Adapter
    IP Address:
    Subnet Mask:
    Default Gateway:
    DHCP Enabled: Yes
    DHCP Server:
    Lease Obtained: Sun Jul 05 20:58:03 2009
    Lease Expires: Mon Jul 06 20:58:03 2009
    DNS Servers:
    Adapter Name: {8246CDCC-66C9-4BAD-B147-7C842940147A}
    Description: Realtek RTL8139/810x Family Fast Ethernet NIC
    IP Address: 0.0.0.0
    Subnet Mask: 0.0.0.0
    Default Gateway
    DHCP Enabled: Yes
    DHCP Server:
    Lease Obtained: Wed Dec 31 19:00:00 1969
    Lease Expires: Wed Dec 31 19:00:00 1969
    DNS Servers:
    Active Connection: LAN Connection
    Connected: Yes
    Online: Yes
    Using Modem: No
    Using LAN: Yes
    Using Proxy: No
    SSL 3.0 Support: Enabled
    TLS 1.0 Support: Enabled
    Firewall Information
    Windows Firewall is off.
    Connection attempt to Apple web site was unsuccessful.
    The network connection timed out.
    Connection attempt to iTunes Store was unsuccessful.
    The network connection timed out.
    Secure connection attempt to iTunes Store was unsuccessful.
    The network connection timed out.
    Secure connection attempt to iPhone activation server unsuccessful.
    The network connection timed out.
    Last successful store access was 2009-06-20 21:52:34.

    Are you running any of Symantec's (Norton) or McAfee's Internet security products or anything similar, or an antivirus/antispyware application? There have been reports that some such utilities treat an upgrade to iTunes as a new application and can block the application from connecting. So you have to go in and reset the utility to allow iTunes. The same thing can happen if you upgrade the security product (this has particularly been a problem with recent McAfee upgrades).
    Check the settings for your utility. If iTunes is still listed, remove and re-enable the exception for iTunes. Consult your utility's documentation for the appropriate procedure; you can find instructions for Norton on Symantec's web page for iTunes. You may also need to check the built-in Windows firewall as well.
    Hope this helps.

  • Yet again another problem with Firefox Beta and Hotmail

    So, I think the new version of firefox 4.XXX does not like hotmail or vice versa. When in hotmail and composing a new message, I cannot add attachments at all. I once again verified that I had this ability in the most current version of Firefox and in Safari. Everything works fine. Did the usual junk, dumped my cache, etc. And I am still having a problem with the calendar not loading. I use to work in IT in a support function and I can clearly tell you that the new browser does not like Windows Live/ Hotmail, whatever you want to call it. It is broken, so please fix this because I like the new browser other than the hotmail issues.

    Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
    Note: ''This will temporarily log you out of all sites you're logged in to.''
    To clear cache and cookies do the following:
    #Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
    #Under "Time range to clear", select "Everything".
    #Now, click the arrow next to Details to toggle the Details list active.
    #From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
    #Now click the ''Clear now'' button.
    Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
    Did this fix your problems? Please report back to us!

  • Multiplexing once again

    Sorry guys, but I have to stay at the problem of multiplexing.
    I know, you've been handling this topic before, but I am not successfull in solving my problems:
    1- I tryed to burn the project right out of IDVD 6.0.1. After 7 hours of rendering it got hung in the "multiplexing" process.
    2- I followed your advice and tryed to save it as a Image-file and burn it with toast 7 out of this. Once again after half a day of rendering IDVD got stuck by "writing the lead in" (why does a .img-file need to have a "lead in" anyway?!?)
    3- I tryed to delete the thumbnail-files etc as adviced, but I still cant burn the project.
    I am still using 10.3.9, but I dont want to buy Tiger before I am not absolutly sure, that this will solve the problem. Every other program is up to date.
    Another Question: where does IDVD save the rendered files? I am slowly running out of HD space. (still having 23 GB, but every new try costs 3 GB)
    I have to say, I am very disapointed, I did not imaging, apple come with such problems in ILife 06.
    thanks and greetings everyone,
    Kristian
      Mac OS X (10.3.9)  

    Well, thats just great!
    Just as I was about to sove my problems with the DVD burning, my DSL modem quit its job. Now I've been offline a week and it was just like ****.
    A world without internet...
    Sorry, back to my burning issue.
    Yes, I tryed all the steps written in the link above, but it didnt work out.
    I deletet al the dots in fonts book, but the appeared back again. Why do they do this?
    I had also an other idea: what if i install IDVD 5 on my extern HD and try to burn the proojects with this version?
    But, since I installed IDVD 6 a month ago, all my IDVD projects (witch were originally created in IDVD 5) have been converted to be compatibel with IDVD 6.
    Is IDVD 5 able to read this files now?
    Thank you for answering, guys.
    Kristian
    Powerbook G4 1,33GHz   Mac OS X (10.3.9)  

  • Once again, iTunes thinks this is the first time I am connecting

    I am not sure what exactly is going on, but today once again I noticed that when I started iTunes (9.1.1) on my laptop (win XP pro/SP3) I got a welcome message and "what's new" window. So I assume that iTunes thinks this is the first time it has started on this computer but clearly, it is not.
    I reported this issue earlier on this forum but got no response (http://discussions.apple.com/thread.jspa?threadID=2243137&tstart=0) so I am re-posting.
    Some of the settings I care about a lot were all undone - like sync settings for my iPhone (all sync settings were unchecked), and podcast settings (keeping all episodes for some podcasts and all unplayed episodes of the others).
    This is highly annoying and I want to know if there is anyone else who has observed this problem, and if so, what the resolution was.
    Thanks in advance!

    Best if you try and explain what you are trying to acheive.
    Iphoto is a different paradigm than you're used to. I don't understand why you are trying to transfer your edited photos back to an external disk.
    There are tutorials here
    http://www.apple.com/findouthow/photos/
    Regards
    TD

  • Bank of America once again

    Once again, and without obvious cause, my browsers (Safari and Opera) stopped allowing connection to BOA's website. The error is BAD REQUEST...your browser sent a query this server does not understand.
    Apple's only solution, reinstall the OS (twice now). This is my first Mac and I guess I'll have to keep a Windows box so I can bank online.
    It is not the browser. It is not BOA. It appears to be a permissions issue(?) as I can create another account and then access the website. It's dissappointing that Apple cannot figure this out. They had me move a number of cache and other folders and plist files without success. Are there any tru coders out there who can look "isde" these files for the answer?
    Mac Pro Core Duo 2.66 3 GB RAM Mac OSX 10.4.9
    Thanks again,
    Chris

    I had a problem accessing the BOA site also. here is how I solved the problem:
    Under System preferences, choose Network.
    Select to Show Built-in -Ethernet. Select the ETHERNET tab.
    At the bottom of this panel, select Custom under the Maximum Packet Size (MTU). Enter 1492 and click Apply Now.
    Hope this works for you too. There seems to be a problem with the maximum MTU size of 1500.

  • Performance issue / faster response after using of same criteria once again

    Since some days I have the problem that some fast queries (not changed) need now a lot of time. The response time for the same query is very different as well: sometimes only 531ms and then 15 secs.
    Now i found out that when I use the same criteria (or only the column which is indicated) once again that the query runs much faster.
    Does anybody has similiar experiences?
    Thanks! Daniel.

    I don't think that is the issue, a query that requires a 14+ second parse would be something to behold.
    The difference is respnse time is likely to do with the data blocks being cached as result of the first query.

  • Once again, my .mac aliases have disappeared from Mail.... Arghhh! help?

    Once again, with no warning, all my .mac aliases have disappeared from the dropdowns in my Mail app (OS 10.4.11). They still exist in .mac/mobile me webmail, and in Mail i'm still receiving emails addressed to them. But I can't reply to these emails with the alias, nor create new emails with aliases.
    I have tried Sync-ing with the site- i recollect that has worked in the past, but now no change. i have tried adding the aliases in with commas after the primary address in Preferences (as is suggested in KB below), but it does not work- and the next time Prefs is open, they are gone. In Mail preferences, the account is listed as ".mac", which is listed in the KB as one of the correct types (the other being imap).
    I use my .mac aliases a lot, and have for years. i do NOT like or want to go to .mac/me Webmail to be able to use them. i do NOT want to change them to .me addresses/aliases. I can't stand how they just randomly come and go as far as being available as dropdowns in Mail... what the heck is up with Apple? i'm paying $100 for these kinds of services (excuse me, $99) and they can't keep a few aliases available to their own app (Mail)? If they weren't so deeply embedded in my business uses, i'd ditch the whole thing.
    Anyway, enuf ranting; does anyone know the solution or work-around? Nothing in the below KB worked for me, even tho it is supposed to.
    the non-helpful KB: http://support.apple.com/kb/HT2296

    If your aliases are disappearing after you enter them, that would indicate that your Mail preferences file has become corrupted. The only solution for that is to delete the com.apple.mail.plist file in Home/Library/Preferences, then restart Mail and setup your account(s) again.
    However, before you do that, you must remove all your mail account folders that being with "IMAP-"; otherwise you'll create more problems for yourself. Those are located in Home/Library/Mail.

  • Hello once again.. i have formatted my external Hard drive it using exFAT, now my windows cant detect my device, can u plzz help me the whole purpose is getting ruined, i use Windows 7 ultimate 64 bit

    hello once again.. i have formatted my external Hard drive it using exFAT, now my windows cant detect my device, can u plzz help me the whole purpose is getting ruined, i use Windows 7 ultimate 64 bit

    This is a problem with the Mac OS X implementation of exFAT. I've had the same problem.
    Best is to use a Windows box to format the drive exFAT. Then it can be read by both Windows and Mac OS.
    But aren't Macs supposed to "Just Work"? Not in this case.

Maybe you are looking for

  • Can't create a function in SQL windows of PL/SQL Developer.

    The function is : create or replace function Xgyh (pvc2Czy in varchar2, pnumYhid in number, pvc2Lfid in varchar2, pvc2Grzid in varchar2, pvc2Zbmid in varchar2, pvc2Bmid in varchar2) return number is intZxbz integer:=1;--返回值(1:正确,0:错误); numDxlb number

  • Safari keeps crashing and breaking my heart

    Hello smart computer fixers! This problem just started this afternoon. I had Safari open and it quit unexpectedly, which happens occasionally, so I started it up again, only to have it quit unexpectedly. It will stay on a website for a few seconds be

  • My iphone 4 won't turn on! Help!

    I have an iphone 4, and it doesn't turn on. My charger was having some problems earlier, so I picked up a new one and this one doesn't work on my phone as well. My Hold button broke a few months ago so I've been using assistive touch to turn off my p

  • Web start won't display splash screen

    Hi, I am using the following .jnlp file.. The problem I am having is that web start will not display the splash screen specified below. It displays the icon fine, but not the splash screen. I cannot find an answer, can anyone help? <?xml version="1.0

  • Document Type Configuration question

    Hi, What does Condition type Line Items (Condition type for copying costs from line items) mean in a sales document type configuration.I am not clear even after reading the F1 help on this field. I know that it has something to do with the pricing co